Used Monguzzi Tro 3200 for sale (9,858)

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Nwjdpod I T Exsfx Acfeh

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC, workpiece weight (max.): 3,000 kg, TECHNICAL DETAILS X travel: 3,200 mm Y travel: 720 mm Njdpfoxn Nd Ssx Acfjwh Z travel: 600 mm Table height: 900 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 125 mm Distance spindle nose to table: 140 - 740 mm Max. workpiece weight: 3,000 kg Clamping surface: 3,900 x 650 mm Tool holder: DIN 69871 AD 40 Spindle speed: 30 - 8,000 rpm Max. torque: 102 x 240 Nm Number of tools: 30 pcs Max. tool length: 330 mm Tool clamping: disc spring Max. milling capacity: 400 x 600 Max. thread size: M20 x M30 mm Boring diameter: 28 x 44 mm Feed rates X/Y/Z axis: 30,000 mm/min Rapid traverse X/Y/Z: 30 / 30 / 30 mm/min Max. feed force: 9,000 / 9,000 / 9,000 kN MACHINE DETAILS Control: Heidenhain TNC Space requirement (L x W x H): 7,200 x 3,400 x 3,100 mm Coolant: 250 bar Total power requirement: 50 kW EQUIPMENT Special accessory Trautomatic (L = 7.50 m) Special accessory full enclosure for work area (H = 3.60 m)

Year of construction: 1986, condition: used, • Working length (mm): 3200 • Drilling units: 3 from below, with a 3-spindle drilling head • Clamping cylinders: 2 from above • Pressure cylinder: 1 on the side • Control system: Siemens, newer model Nwsdpfx Ae Drmxocfsh

Condition: excellent (used), Year of construction: 2009, Technical Data: Working length: 3230 mm Distance between uprights: 2690 mm Pressing force: 230 tons CNC control: TASC 6000 Number of controlled axes: Stroke: 445 mm Throat depth: 420 mm Table width: 140 mm Working height: 1065 mm Crowning: CNC-controlled Hydraulic tool clamping Die shifting CE marking Motor power: 30 kW Dimensions (L x W x H): approx. 4150 x 2350 x 3100 mm Weight: approx. 17 tons Accessories: 2 pcs. bending aids Electronic pressure gauge Measuring system with centrally mounted glass scales and temperature compensation Safety device BendGuard Network capability Support arm with height adjustment Njdpoxdt U Hsfx Acfewh Condition: Overall in very good condition Little used, 35,000 hours The seller is not liable for typographical or data transmission errors. The machine is visually, technically, and regarding wear in accordance with its age; used machines are sold without any warranty.

Condition: used, used, good condition Make Steton Type SC 400 / 3200 CE type tested Motor boosted 6.5 kW Trolley length approx. 3200 mm Cutting width approx. 1300 mm max. blade diameter 400 mm swiveling up to 45° scoring unit parallelogram protection control panel above Rip fence with electrical adjustment Table top extension approx. 400 x 800 mm Electric height adjustment Swivel adjustment electric Digital display: - cutting angle - Rip fence - Rotational speed Extraction connection D 120 / 60 mm Space requirement approx. LxWxH mm 3400x2300x1700 Weight approx. 1000 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen Nwjdpsvyt D Dofx Acfeh - free loaded -

Condition: good (used), functionality: fully functional, Panel Saw SICAR Flash 3200 CE (1374) Specification: • Condition – used, after inspection • Manufacturer – SICAR • Model – FLASH 3200 CE • Sliding table length 320 cm • Mounted blade diameter 300 mm • Scoring unit with separate motor • Main saw motor 4.0 kW • Scoring unit motor 0.55 kW • Blade tilting manually • Manual blade lifting and lowering • Side support table 100 x 60 cm • Extraction ports Ø 60 and 120 mm • Weight – 700 kg • Year of manufacture – 2009 • Overall dimensions 320 x 330 x 115 cm (W x L x H) Transport dimensions 100 x 330 x 115 cm (W x L x H) Nwedpfx Acowwli Ejfoh Additional information: • Good, original technical condition • Presented photos show the actual condition of the item for sale • Possibility to power up and test the machine on-site

Condition: new, Year of construction: 2026, functionality: fully functional, Professional machine for processing high density boards, MDF boards, ABS panels, PVC, solid wood and other materials based on wood or similar structure and hardness. In the set with a ELECTRIC clamp. Machine available on the spot. Machine features Guided on rails. Large body of the machine based on a closed-profile frame provides rigidity and perfect cutting conditions. Big 3200×420 mm sliding table makes it perfect both for professionals and novices. Technical data Saw diameter / hole diameter 350 / 30 mm Saw blade tilt range 0–45° Speed 2800 / 4000 / 4800 rpm Scoring saw diameter / hole diameter 120 / 20 mm Scoring speed 7500 rpm Table dimensions 945×720 mm Sliding table 3200×420 mm Cutting width by fence 1200 mm Transverse cut by the fence for transverse cutting 3200 mm Intake connector under table diameter Ø100 mm Intake connector diameter in saw guard Ø80 mm Minimum air speed 20 m/s Minimum airflow 565 mm³/h Nwodovuf Iqspfx Acfeh Main motor power 5.5 kW Scoring motor power 1.1 kW Weight 850 kg

Condition: used, Year of construction: 2023, Operation Spreading vane set TS20 left + right Hydro drive left + right with Auto TS / and FlowControl Main disk left + right with AutoTS Pipe protection bracket Rolling and parking device swiveling Working light Tilt sensor f Weighing system / 16 pcs EasyCheck- Njdpfxet A Tzwe Acfewh

Condition: used, Year of construction: 2024,

Condition: used, Year of construction: 2024, Manual operation Spreading vane set TS20 left Spreading vane set TS20 / right Hydro drive left with AutoTS and FlowControl ProfiSPro Hydro drive / right with AutoTS and FlowControl ProfiSPro Main disc left with AutoTS / main disc rec Nwodpfstrdzwox Acfoh

Condition: used, Year of construction: 2022, Documentation in German Spr Type plate PTO shaft 910 mm with / friction clutch Container attachment L 3200 swivel mounted ex works Mud flaps L / and ladders LED lighting to the rear for road travel Roll-up tarpaulin L / with manual operation Nsdsrxr R Sspfx Acfswh

Condition: used, Year of construction: 2023, Spreading vane set TS30 right ISOBUS operator terminal AmaTron4 ArgusTwin for / ZA-TS WindControl for ZA-TS Hydro GPS-Switch basic for AmaTron4 SpreaderConnect / for ZA-TS Drive Hydro left with AutoTS Drive Hydro right with AutoTS / main disc left Nsdpst Nf Dqofx Acfswh

Condition: used, Year of construction: 2024, Basic hopper / ZA-V Easy spreader unit / warning sign foiling / 910 mm PTO shaft / with friction clutch / S 1400 hopper extension, welded / factory-fitted / S mud flap / LED lighting to rear / Easy operating computer Nwsdpfx Asuhp Ehocfsh

Condition: used, Machine chassis, steerable chassis with turntable Manufacturer: S.W.L. Load capacity: 24 tonnes Installation/chassis height: 175 mm (top edge of turntable) Number of load rollers: 12 pcs Roller diameter: 110 mm Roller width: 85 mm Nedpfx Acjxw Rczefswh Turntable: Ø 220 mm Drawbar length: 1500 mm + towing eye Weight: 150 kg - Turntable with rubber coating - Towing drawbar with hand grip and towing eye Ø 41 mm Space requirement without drawbar (L x W x H): 670 x 860 x 170 mm Very good condition – like new, presumably used only once 2 units available Price per unit

Condition: new, power: 7.5 kW (10.20 HP), Equipment: scorer, Net price: €10,500 - Scorer - Saw blade tilt and height adjustment are manual - Cutting height 200mm - Scoring device with separate drive motor - Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ - High dead weight ensures vibration-free operation - Large extension table with material roller - Parallel fence with round bar guide - Extendable aluminum longitudinal fence with two folding stops - 7.5 kW powerful main motor mounted on a robust cast iron frame - Four-times-cushioned sliding table made of anodized aluminum with high torsional rigidity - Multiple locking on sliding table - Standard with table extension and table extension made of thick plate - Large swing guard hood easily swivels up using a gas spring - Saw blade clamping via tool-free rapid system + Extraction connection Extraction port diameter: 120mm Extraction port diameter for saw guard: 80mm + Electrical data Connection voltage: 400V Mains frequency: 50Hz Nominal power consumption: 8.3kW Output power: 7.5kW + Sliding table and table Sliding table length: 3200mm Sliding table height: 890mm Table height: 890mm + Circular saw unit Cutting width with parallel fence: 1450mm Max. cross-cutting width left of saw blade: 3200mm Saw blade tilt: 90 – 45° Max. cutting height 90°: 200mm Nwodewf Ndcjpfx Acfoh Max. cutting height 45°: 140mm Saw blade diameter: 550mm

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Nodeyf Eucepfx Acfswh Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: new, Year of construction: 2026, sheet thickness steel (max.): 4 mm, back gauge: 1,000 mm, CIDAN EVO DUO metal shear is the strongest mechanical shear on the market, with a capacity to handle sheet thicknesses from 0.5 mm to 4.0 mm in the same machine (applies to EVO DUO 32). EVO DUO is a powerful built guillotine shear equipped with two (DUO) gearmotors that distribute power and load optimally. The CIDAN EVO DUO metal shear is available in two lengths, 3200 mm and 4100 mm. The machine is well equipped as standard with a lot of features that creates a perfect working environment that meets the greatest demands on efficiency and ergonomics: Blade gap adjustment Sheet support – supports the material during the cut, as standard designed for return to sender. As option with delivery to the rear side of the machine. Pneumatic hold-down beam that enables gentle handling of softer materials, such as aluminum. The distance from the hold-down beam to the cutting line is less than 35 mm, which minimizes the material waste. Flexible table with T-groove rails for table pans, fixed and adjustable angular stops and support arms that can be rearranged and replaced. Nwsdem Nbq Rspfx Acfjh EVO DUO guillotine shear can be equipped with a 750 or 1000 mm programmable back gauge with CutLink finger touch control. The back gauge is a fast and accurate positioning system with many interesting functions that facilitate the handling of the sheet metal. CIDAN shear EVO DUO fits well with the CIDAN philosophy of low environmental impact, as the machine has low energy consumption, a very low noise level and is designed for maximum usability.

Condition: new, Year of construction: 2026, CIDAN F folding machine is fast, user-friendly and reliable. The new construction is robust with welded sides, extra strong lower beam and clamping beam. The generous 150 mm opening height and the generous beam openings allow greater flexibility. The folding beam comes in three different widths, offering the best result for any profile and material, with keyholes for fast changes. The strong but compact folding beam makes the operator’s work easy and the entire process is speeded up as the clamping beam opens before the folding beam is back in place. Nsdpfx Acjm Tv D Uofswh Choose a CIDAN F folding machine and you choose work of joy and productivity in a perfect combination. - Fast, user-friendly and reliable. - Adjustable crowning for perfect folding results regardless of length and material thickness. - Two folding beam rails as standard, 7/10 mm and 15 mm. - 8–16 gauging rails depending on back gauge type and working length. Click here to read more about our back gauges. - Choose between three different control systems: EasyLink, nuLINK or ProLink W.

Condition: new, Year of construction: 2026, CIDAN FS folding machines are phenomenal combinations of raw strength and flexibility. With powerful motors that fold with fantastic precision and to exact measurements this machine can do a lot more than just bend. Together with the ProLink W or nuLINK control system and frequency control of the machine’s movements you have everything you need for contract manufacturing with high quality and productivity. CIDAN FS folding machines are true workhorsees with a whole lot of benefits. - Crowning adjustment as standard always gives the perfect folding result Nsdjm Tv Hzjpfx Acfswh - Two folding beam rails with width 7/10 mm (0.275″/0.394″) and 20 mm (0.787″) as standard - Fast, reliable, and user-friendly - Choose between three control systems, EasyLink, nuLINK or ProLink W, all with plenty of features - Multiple backgauge stops for both small and large parts across the bending length of the machine (Click here to read more about our back gauges.)

Condition: new, Year of construction: 2026, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. Nwedpjmhhn Ejfx Acfeh - 150 mm movement of folding beam, to move outside of material on folding side. - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. - The folding beam can be used as front gauge up to 150 mm. - Add vacuum grippers to make work lighter, more precise, and automated!

Condition: used, power: 1.1 kW (1.50 HP), input voltage: 380 V, volume flow: 2,000 m³/h, intake manifold diameter: 140 mm, filter area: 1.65 m², total height: 1,900 mm, total length: 1,100 mm, total width: 650 mm, overall weight: 50 kg, extraction connection diameter: 140 mm, nominal flow rate: 2,000 m³/h, negative pressure: 1,800 Pa, nominal power: 1.1 kW (1.50 HP), space requirement height: 1,900 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, transport length: 1,100 mm, transport width: 650 mm, transport height: 1,900 mm, No. 3258 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Nedpfx Acjx Hi Rxsfewh Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, Technical data: Max saw blade diameter: 350 mm Min saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring tool diameter: 120 mm Scoring tool spindle diameter: 20 mm Undercutter on a separate engine Tilting saw from 0° to 45° Manual adjustment of the angle of inclination of the saw blade Electric height adjustment of the saw Njdpsmiii Sjfx Acfswh Trolley length: 3200 mm Cart lock Eccentric clamp Table extensions Table height: 875 mm Culag: 120mm Ruler 3170 mm long with 2 stops Extraction port diameter: 125 mm Cover Safety switch Power: 400V Total power: 6.5 kW Machine dimensions Length: 3450mm Width: 3500mm Height: 1300mm

Condition: new, pressure: 160bending length: 3200column width: 2655daylight: 400motor: 11slide stroke - max.: 200repeat accuracy: 0,015precision of position: 0,10CNC Press Brake 3200 mm x 160 t Standard Equipment:Sturdy construction for high stability and precision. CNC Axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. Motorized CNC crowning device with CNC control for precise adjustments. CNC control system from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. Back gauge with linear guide and ball screw, equipped with 4 back gauge fingers for precise material positioning. 2 sheet metal support arms for ergonomic handling of the material. Laser protection device on the upper beam to ensure safety during operation. Quick clamping for upper tooling for fast and easy tool change. Upper tooling system: Promecam Amada, split and offset for maximum flexibility. Multi V die system: Both Promecam and Amada systems are compatible. Nedpfx Ajv S Npyecfswh CE safety equipment to comply with all relevant safety regulations.

Condition: new, Year of construction: 2025, bending angle (max.): 150 °, sheet thickness steel (max.): 1 mm, sheet thickness copper (max.): 1 mm, ❗❗ Electric sheet metal bending machine RED-3200/1.0/150* with recess ❗❗ Discover a new era in metalworking with our revolutionary sheet metal bending machine that harmoniously combines craftsmanship heritage with the latest technological developments. We present a machine that not only meets but exceeds your wildest expectations. Don't miss the chance to equip your workshop with a groundbreaking tool that eliminates the traditional difficulties of manual bending and offers unprecedented comfort and efficiency. Bending machine / bending machine / roofing machine Polish manufacturer PROD-MASZ / brand new directly from the manufacturer With our bending machine, equipped with an advanced electronic control system, precision and ease of use become standard. Now one push of a button starts the bending process and guarantees flawless results without unnecessary effort. Magnets attached to the bending beam ensure a stable position of the sheet metal and enable precise dimensional adjustment, which is the key to perfect shapes. The RED 3200/1.0 mm/150* offers an impressive maximum working width of 3,200 mm and the ability to bend steel sheets up to 1.0 mm thick, with non-ferrous metals achieving an additional 30% capacity. The maximum bending angle of 150 degrees and the ability to cut sheets across the entire working width push the boundaries of precision and efficiency. In addition, the machine offers a three-stage height adjustment of the upper beam and a number of necessary accessories, including a protractor, an angle limiter, a rear table for supporting the sheet -> quick adjustment with a handwheel. Nedpfjcv R Dksx Acfswh We look forward to hearing from you! -> We issue invoices

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial facility. The clamping force was factory-upgraded by Arburg to 3600 kN; the machine has received factory servicing. Clamping unit Clamping force: 3,600 kN Platen dimensions (H × W): 1,040 × 1,040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum mould height: 300 mm Maximum daylight opening: 1,400 mm Injection unit Screw diameter: 70 mm Shot volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar Nodpfx Aox Thw Rscfewh Electrical–hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Dimensions and weight Net weight with control cabinet: 17 t