Used Nissens 675/110/H285 Mm for sale (74,934)

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. Bsdpfx Aswc Nrnsmzjlk The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 120001, travel distance X-axis: 1,120 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 3,000 mm, total length: 4,500 mm, total width: 3,600 mm, table width: 1,200 mm, table height: 800 mm, table length: 700 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, For sale is a CNC vertical machining center, Macro Micro Tech MCV 120. The machine is in very good condition. Model: MCV 120 Year of construction: 2014 Serial number: 120001 Machine No.: 1500567 Weight: approx. 2,400 kg Mains voltage: 380 V Control system: Heidenhain Machine hours: 22,170 h Program runtime: 8,700 h Spindle hours: 8,089 h Axis hours: 8,297 h Spindle system: Maximum spindle speed up to 12,000 rpm Spindle taper: SK40 Travel in X-axis: 1,120 mm Travel in Y-axis: 600 mm Travel in Z-axis: 600 mm Distance from spindle nose to table: 700 mm Transport and loading can be arranged throughout Europe for an additional fee, upon request. Prices are exclusive of VAT. Inspection is possible by appointment. Contact us, and our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling WE BUY / SELL PRODUCTION AND METALWORKING MACHINES, AMONG OTHER THINGS. Do you need a high-quality, yet affordable, metalworking machine for your production? Or would you like to sell yours? Bljdpfx Ajzk H S Eomzek For further information or to contact us, please visit our website.

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, slip unit Bedpfx Amozkfybezjlk metal roller, slip unit with shoe metal output roller, slip – from below: conveyor belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11kW with pneumatic brake working pressure 6-8bar diameter of extraction nozzle 2x150mm overall dimensions L/W/H 1960x1700x2000mm weight approx. 2000kg – made in Germany – 2 units – unpainted – used sander, very good condition Net price: 31900 PLN Net price: 7595 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Bedpozkmi Defx Amzjlk Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Year of construction: 2008, condition: ready for operation (used), A CNC vertical machining center by Saeilo requiring repair is available. Travel X/Y/Z: 1120mm/700mm/700mm, table dimensions X/Y: 1200mm/700mm, max. table load: 1000kg, spindle nose to table distance range: 100mm-800mm, tool holder: SK40, power: 16.5kW, tool stations: 30, rapid traverse: 20m/min, feed rate: 15m/min, positioning accuracy: +/-0.005mm, repeatability: +/-0.003mm. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2650mm, weight: approx. 7800kg, control: Heidenhain, operating hours: approx. 50550h, spindle hours: approx. 13000h. The machine geometry must be checked. Furthermore, the tool changer is sticking, leaking oil and the lighting has defects. Documentation available. An inspection on site is possible. Bljdpezidilsfx Amzok

Condition: excellent (used), Splash guard Diameter 390 mm Bljdpfxefm Tqzj Amzek Wheel offset 6 Bolt circle diameter 135 mm Weight 56 kg

Year of construction: 2000, condition: excellent (used), Splash guard Bjdpfxed Tyu Re Amzelk Diameter 400 mm Taper 105 mm Bolt circle 135 Estimated age

Condition: good (used), Grinding wheel Diameter 500 mm 475 rpm. Bljdpjcx N Atofx Amzek

Year of construction: 2011, condition: excellent (used), Lathe chuck Diameter 330 mm Height 100 mm Weight 57 kg Year of manufacture is estimated. Blsdod Na Spjpfx Amzek

Condition: used, Mounting block 2 available Bedec Rmpuspfx Amzelk 1230 x 1230 mm Height 560 mm Distance between holes 60 mm

Year of construction: 2010, condition: excellent (used), Splash guard 24830 Diameter 500 mm Blodpfx Amod Tyu Eozjk Height 115 mm Taper 120 mm Estimated age

Condition: excellent (used), Splash plate Diameter: 500 mm Weight: 68 kg Bedefm Tqrepfx Amzslk Bolt circle diameter: 134 mm Center bore diameter: 96 mm

Condition: excellent (used), Taper shank chuck (28319) Diameter 290 mm Cylindrical shank 78 mm Taper 6 mm Weight 54 kg Bsdpfxjiuvumo Amzolk

Condition: excellent (used), For sale is a Schimanek Type 70 manual bookbinding guillotine, manufactured in West Germany. This is a robust machine designed for the precise cutting of paper, cardboard, and other bookbinding materials. The device is equipped with a long cutting arm that provides high cutting force, an adjustable back gauge with a scale, and a stable worktable. The massive construction guarantees accuracy and long-term durability. Technical specifications: Manufacturer: Schimanek Model: Type 70 Serial number: 24256 Country of manufacture: West Germany Type: manual bookbinding guillotine Maximum cutting width: approx. 700 mm Adjustable back gauge with scale Manual material clamping Robust metal construction Condition: used Applications: Bledpfx Asziwnhjmzok paper cutting, cardboard cutting, corrugated board cutting, bookbinding work, printing houses, graphic design studios. The machine is sold in the condition shown in the pictures.

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Production of albums, catalogs, and covers. Bsdpeziwnbofx Amzslk

Condition: good (used), Die block, W x H approx. 3500 x 260 x 190 mm, . Total length = 3500 mm Length of the reducers = 2600 mm . V-groove, without reducers, opening width approx. 100 mm V-groove, with reducers, opening width approx. 150 mm, H = 220 mm . Bedpfx Aszh D Dyemzjlk .

Condition: used, functionality: fully functional, Year of construction: 2000, control type: CNC control, roller (bottom) diameter: 210 mm, roller (top) diameter: 205 mm, side roll diameter: 170 mm, roller length: 1,100 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, power: 5.5 kW (7.48 HP), Equipment: cone bending device, emergency stop, hardened rollers, 4 – Roll bending machine Manufacturer: STÖLTING, Type: VB 322 Year of manufacture: 2000 Bedpszgf Rxofx Amzelk Technical data Manufacturer: STÖLTING Type: VB 322 Year of manufacture: 2000 Bending length: 1100 mm Sheet thickness: 12 mm Bending allowance: 8 mm Upper roll diameter: 205 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Main motor: 5.5 kW Weight: approx. 3200 kg Equipment • CNC control • Conical bending device • Operating manual All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Ball screw drive Blodpfx Aszgcawomzjk ø 63 PITCH 15MM 13:78 966/11 00000 STEINMEYER

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,316 h, functionality: fully functional, machine/vehicle number: 11080297, travel distance X-axis: 1,100 mm, travel distance Y-axis: 585 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 585 mm Travel range, Z-axis: 600 mm Spindle speed (max.): 8,000 rpm Spindle type: SK 40 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Bjdezd Aigjpfx Amzslk Control system: Heidenhain TNC530i Input voltage: 400 V Total weight: 7,000 kg Operating hours (according to image) Control system operating hours: 42,480 h Machine operating hours: 38,123 h Spindle operating hours: 12,316 h EQUIPMENT Documentation/Manual Chip conveyor Electronic handwheel

Condition: good (used), Lynette Maximum height 330 mm Diameter 185 mm Base length 330 mm Base width 140 mm Overall width 600 mm Bsdpfod S Algsx Amzelk Overall height 650 mm

Year of construction: 2000, condition: excellent (used), Tailstock Bore diameter: 520 mm Bedpfefgwi Rjx Amzslk Overall height with base: 970 mm Overall height without base: 650 mm Tailstock spindle diameter: 100 mm

Condition: used, Lens Height without base: 290 mm Base width: 50 mm Distance: 170 mm Bljdocrcxtjpfx Amzsk

Condition: used, Lens Diameter 150 mm Blsdocrcv Uepfx Amzsk Height without base 420 mm Width of base 125 mm

Condition: good (used), Hollow spindle stop Diameter 125 mm Weight 6.6 kg Blsdpfx Amedbc E Nezok

Condition: excellent (used), round clamping plate clamping disc diameter 1380 mm Bsdpfx Asfggc Tsmzjlk height 75 mm weight 900 kg