Used Okuma Ma-600 Hb for sale (24,054)

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. Godpfx Aisztz D Ioxeka 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Godpfx Ajypud Ujixeka

Condition: new, empty load weight: 3,600 kg, maximum load weight: 10,300 kg, overall weight: 13,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: other, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Drawbar extendable up to approx. 3,850 mm, locking possible at approx. 1,000 mm, 2,000 mm, 3,000 mm or 3,850 mm, laden loading height approx. 830 mm, internal vehicle width approx. 2,530 mm, 4 centre post pockets for 100 x 50 plug-in posts, 8 post pockets in outer frame, 4 lashing rings, each rated at 5.3 t, outer frame with lashing eyes, 4 warning signs with lighting, removable rear beacon, contour markings and side underrun protection, mudguards and spray suppression at rear. Subject to printing errors, mistakes and changes; sample images. More details at: ! Gkodpozrqlrjfx Aixoa

Condition: new, empty load weight: 3,600 kg, maximum load weight: 10,300 kg, overall weight: 13,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Drawbar extendable to approx. 3,850 mm, locking positions at approx. 1,000 mm, 2,000 mm, 3,000 mm or 3,850 mm; loaded floor height approx. 800 mm; internal vehicle width approx. 2,530 mm; centrally, 4 stake pockets for 100 x 50 mm plug-in stakes; 8 stake pockets in the outer frame; 4 lashing rings, each rated at 5.3 t; outer frame with lashing eyes; 4 warning panels with lighting; rear plug-in rotating beacon; contour marking and side underrun protection; rear mudguards and spray suppression. -- Subject to printing errors, mistakes and changes; sample images. -- More data at: !, More Details: ! Gkjdpfx Aiezrqhysxoa

Condition: used, Year of construction: 2013, machine/vehicle number: 0602-260025, The MicroStep MasterCut Compact P 6001.20 is a compact and powerful CNC plasma cutting system designed for the precise processing of sheet metal on a work surface measuring up to 6,000 × 2,000 mm. The gantry-style system is equipped with a Kjellberg HiFocus 161i fine plasma torch, an automatic gas console, and Contour Cut Speed technology. Maximum positioning speed of 35,000 mm/min. Gkodpfjzq E A Aex Aixoa

Condition: good (used), Year of construction: 1996, Siemens 840-D SL, approximately 2012 Table: 2200 x 2250 mm Gsdpfxjzq Ekto Aixska Distance between columns: 3000 mm Max. workpiece height: 1200 mm Max. drilling depth: 600 mm Max. deep-hole drilling diameter: 35 mm Spindle speed: 3500 RPM Spindle power: 15 kW

Condition: used, Year of construction: 2018, mileage: 88,863 km, power: 170 kW (231.14 HP), first registration: 06/2018, overall weight: 15,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 08/2028, gearing type: mechanical, emission class: euro6, loading space volume: 6 m³, Equipment: ABS, air conditioning, Internal vehicle number: G400141 Available immediately at our location in Kaufungen. More information: Luis Lucena Viktoria Sologubova GERMAN Mercedes-Benz ATEGO 1323 4x2 Sweeper Truck, Bucher Cityfant 6000 German municipal vehicle with a Bucher-Cityfant-6000 street cleaning superstructure, a 6 m³ stainless steel waste container, a separate JCB superstructure engine, and extensive safety and comfort features. Vehicle data: * Vehicle number: G400141 * Vehicle condition: Used * Category: Sweeper truck / Municipal vehicle * First registration: 07.06.2018 * Year of manufacture: 2018 * Mileage: 88,863 km * Fuel type: Diesel * Engine displacement: 5,132 cm³ * Power: 170 kW (231 hp) * Transmission: 8-speed manual transmission * Emission class: Euro 6c * Environmental badge: 4 (Green) * Wheel arrangement: 4x2 * Axles: 2 * Permissible total weight: 15,000 kg * Unladen weight: 9,150 kg * Payload: 5,850 kg * Color: White * Seats/doors: 2/2 * MOT: New upon purchase * Inspection (SP): Due 01/2027 * 1 Previous owner Dimensions: * Length: 6,400 mm * Width: 2,550 mm * Height: 3,300 mm Street cleaning superstructure: * Manufacturer: Bucher Municipal AG * Type/Commercial name: Cityfant 6000 * Serial number: SEQ 8869 * Year of manufacture: 2018 * Waste container: 6.0 m³ * Stainless steel waste container * Container tilt angle: approx. 55° * Stainless steel dirt slide * Inspection flaps on the left and right * 4-inch wastewater drain * Waste drainage * Air shut-off valve on the suction hose * A-coupling on the air guidance screen * Multi-stage, pneumatically operated support strut * Exhaust routing through the container superstructure Superstructure engine and sweeping technology: * Separate JCB superstructure engine * Engine type: 444-TA4-55 * Superstructure engine power: 55 kW * Separate fuel tank for the superstructure engine: 150 liters * Stepless engine speed control * Hydraulic fan drive * Hydraulically driven roller and disc brush * Coated steel suction nozzle * Suction hose diameter: 250 mm * Swiveling tail wheels * Automatic lifting of the sweeping unit when reversing * Work lights on the sweeping unit Recorded operating data of the superstructure: * Operating hours superstructure engine: 309 hrs. * Operating hours superstructure: 416 hrs. * Operating time sweeping unit: 335 hrs. 35 min. * Operating time disc brush: 316 hrs. 27 min. * Operating time roller brush: 85 hrs. 41 min. * Operating time suction blower: 334 hrs. 09 min. * Documented sweeping distance: 4,189 km * All values according to the Bucher control terminal display Water system and operation: * Stainless steel water tank: 1,900 liters * Water level indicator * Bucher Municipal instrument panel * 7-inch color display * Multifunction display * Standard control panel * Cable remote control * Warning lights and rotating beacons Chassis and equipment: * Right-hand drive * Air conditioning * Driver's air-suspended seat * Electric windows * Electrically adjustable exterior mirrors * Additional thermal insulation * Radio * Cruise control * Active Brake Assist * Lane keeping assistant * ESP * Differential lock on the rear axle * Engine brake * Speed limiter * Reversing warning * Daytime running lights * Fleetboard vehicle computer * Short ClassicSpace cab * Parabolic suspension at the front * Front axle 5.3 t * Pre-wiring for third-party superstructure electrics * Rotating beacons * Steel rims Tires: * Tire size: 10 R 22.5 * Axle: Aeolus, tread depth approx. 13 mm Gkjdpfx Aioy I Hfpsxea * Axle: Pire

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 610 mm, turning diameter: 410 mm, spindle motor power: 18 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 81 mm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 1,700 mm, total length: 3,500 mm, total width: 1,700 mm, spindle nose: ASA 8, overall weight: 4,900 kg, swing diameter over top slide: 460 mm, spindle diameter: 255 mm, Equipment: documentation/manual, USED ​​3-axis lathe with driven tools and Fanuc 0i-TF CNC Gedjzrnl Aspfx Aixeka

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment Gjdpfx Aisyr R A Esxska • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 18 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, bar passage: 81 mm, total height: 2,170 mm, total length: 4,400 mm, total width: 2,100 mm, overall weight: 6,650 kg, spindle diameter: 254 mm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​6-axis CNC lathe with counter spindle, live tools and Y-axis and FANUC 0i-TF PLUS CNC Gsdpfxszrmiaj Aixoka

Condition: excellent (used), I am offering for sale a professional HBM MGCplus measuring system from Hottinger Baldwin Messtechnik (HBM). This is a high-end, modular measuring amplifier used in research laboratories, industry, and testing stations for signal acquisition and analysis from sensors. The device is equipped with a control panel with an LCD display and installed measuring modules. The unit being sold was removed from an industrial installation. Specifications: • Manufacturer: HBM – Hottinger Baldwin Messtechnik • Model: MGCplus • Control unit: AB22A • Installed modules: ML60B BL01 (2 units) AP17 SY03 • Power supply: 115–230 V AC, 50–60 Hz • Maximum power consumption: 300 VA Gkodpfx Aiszru Rrjxea Condition: • Used. • Visual condition as shown in the photos – normal signs of use.

Condition: excellent (used), power: 109 kW (148.20 HP), fuel type: diesel, color: other, number of seats: 1, first registration: 08/2012, Year of construction: 2012, operating hours: 12,915 h, Equipment: air conditioning, = Additional options and accessories = - Day Cabin - Radio = Remarks = Condition CE type: CE = More information = General information Cab: day Technical information Number of cylinders: 4 Engine capacity: 4.460 cc Track width: 2.380 cm Engine type: KOMATSU SAA4D107E-1A Godpfxjzph Sde Aixoka Empty weight: 21.200 kg Dimensions (LxBxH): 9430 x 2980 x 3040 cm Functional Number of valves: 2 Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good

Year of construction: 2010, condition: used, HB THERM 140 Z 2 (2010) Gkjdpfx Aijv H Ad Hexja 16KW Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level 55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 Gkodpfx Aioy Aaxroxoa • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, table load: 2,500 kg, overall weight: 20,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent; approximately 500 cutting hours; near-new condition • Heavy-duty machining center for high material removal rates • Extremely rigid machine structure • Box guideways on all axes; quadruple box guideway system on Y-axis • Automatic oil lubrication for guideways with machine stop monitoring • Okuma OSP300 control with IGF conversational programming • Parameterized automatic tool collision prevention system • Automatic cutting force, tool load, and spindle torque monitoring • Tool life management and tool usage monitoring • Communication interfaces: USB, PCMCIA, RS-232 • Cutting force: 580 Nm • Chip removal capacity: 540 cm³/min • Spindle speed: 6,000 rpm • Spindle oil cooler • Table size: 2,200 × 850 mm • Rapid traverse: 20,000 mm/min • Tool change time: 0.5 s; chip-to-chip time: 5 s • Machine currently under production; can be inspected under power by an official Okuma technician • Includes documentation: spare parts list, electrical diagrams, programming manual, operation manual Gksdpjzqcr Ijfx Aixsa • Delivery: Immediate, subject to prior sale Additional equipment • Renishaw tool measuring system • Independent Knoll high-pressure coolant system (70 bar) • 30-micron coolant filtration system • LTA mist extraction system • Rear hinge-type chip conveyor • Large set of BT50 tool holders • Transformer Technical Specification Taper Size BT 50

Year of construction: 2021, condition: ready for operation (used), A nearly new Wheelabrator overhead monorail shot blasting machine is available. Rail overhang: 2338mm, rail width: 2980mm, working height: 880mm, work chamber height: 1600mm, max. workpiece diameter: 1200mm, max. workpiece weight: 400kg, exhaust air volume flow: 2500m³/h, exhaust air flange adjustment min./max.: -90°/90°, surface roughness range: 0.1µm-12.5µm, connected load: 22kW, component tolerances: ISO 2768-mK, welded construction tolerance: ISO 13920-AE. Machine dimensions X/Y/Z: approx. 4250mm/3250mm/4850mm, weight: approx. 5750kg, shot blasting hours: 58h, operating hours: 190h. Documentation available. An on-site inspection is possible. Godozqfxqjpfx Aixoka

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 30,000 W, total height: 1,970 mm, total width: 1,900 mm, overall weight: 6,000 kg, product length (max.): 3,310 mm, number of axes: 5, This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details. • Working capacity: • Distance between centers: 1,020 mm • Maximum swing over covers: 580 mm • Swing diameter between centers: 470 mm • Maximum turning diameter (standard tools): 410 mm • Maximum turning diameter (driven tools): 340 mm • Main spindle: • Type: Big Bore ASA 8 • Air blow system for the self-centering chuck • Spindle opening and closing possible during rotation • Axis travel: • W: 825 mm • Rapid traverse: • X: 25 m/min • W: 25 m/min • Z: 30 m/min • Y: 12.5 m/min • Sub-spindle: • Connection: Flat 140 • Maximum speed: 6,000 rpm • Tool turret: • Type: OKUMA • Tool positions: 12 • Driven-tool power: 7.1 kW / 4.1 kW • Maximum driven-tool speed: 6,000 rpm Additional equipment • LNS Quick Load Servo III bar feeder • Bar interface preparation Godjzpwu Ujpfx Aixjka • Right-side chip conveyor • Finished-part catcher arm • MSCTN80 A8 collet chuck with various collets • Tool holder kit • Kitagawa BB210 self-centering chuck • Kitagawa B206 self-centering chuck Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2013, operating hours: 8,200 h, functionality: fully functional, Control unit: OSP-P300M-R Table dimensions: 1530 x 660 mm Table load: max. 1500 kg X-axis travel: 1500 mm Y-axis travel: 660 mm Z-axis travel: 660 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 12000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 11000 kgs Dimensions (L x W x H): 3200 x 2950 x 2800 mm Gkjdpfxjy T Nhds Aixsa Accessories / Equipment: - MAYFRAN chip conveyor - Coolant system - Spindle cooler - Transformer - Mac NAVI - TAS-C - Tool lengt measuring - Zero point measuring - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ML0377-000140, turning length: 1,280 mm, turning diameter: 376 mm, spindle bore: 780 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,900 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 200 rpm, turning diameter over bed slide: 780 mm, type of input current: three-phase, We offer this Doosan PUMA 2600LY II CNC turning and milling center in like-new condition, manufactured in 2020. The machine has not been put into operation and has not been turned on since it was new. Power-on time: 0 Model: PUMA 2600LY II Serial number: ML0377-000140 Supply voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Rated power: 49.06 kVA Interrupting capacity: 5 kA Current at full load: 74.65 A Short-circuit capacity: 10 kA Circuit diagram version: P210SYH840A07 Weight: 7400 kg Date of manufacture: 2020-11 - Hydraulic chuck 255 mm (10”) – 3-jaw, with a set of soft jaws and a set of hard jaws - Hydraulic unit - Coolant system with a high-pressure pump (min. 7 bar) - Box guideways for all axes – induction hardened - Slant bed (min. 30°) - Work area lighting - Front door safety switch - Leveling pads - Color monitor - Conversational/Graphic programming support - Turret (min. 12 stations) - Tool holder kit: min. 2 straight driven holders; 2 angular driven holders; 8 static holders for drills and boring bars - Full telescopic covers for guideways - Full machine enclosure - Programmable tailstock (MT5 center) - 3-color status light (stack light) - Automatic tool presetter / tool probe - Tool monitoring system Gkedpfjy Nmdnjx Aixea - Electrical filter - Bar feeder interface - Automatic parts catcher and parts box - Thermal compensation function - Direct drive spindle - Spindle speed: min. 4000 RPM - Built-in network card (Ethernet) - USB port - Hinged belt-type chip conveyor - Oil skimmer - Toolbox - Radial driven tool holder x2, Axial driven tool holder x2 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, mileage: 820,829 km, power: 107 kW (145.48 HP), first registration: 04/1993, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, suspension: other, number of seats: 3, Equipment: trailer coupling, Roof hatch, partition, classic car, radio, diesel classic car, manual transmission, 3-seater, radio, trailer hitch, side ramp, 2 horses, roof hatches, windows in the horse compartment, storage space, saddle and bridle holder, permissible total weight 7,490 kg. FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Faller at the following number. //*EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is provided without guarantee.* You can find more offers on our website: The description and data provided do not constitute a guarantee and are not binding. The purchase agreement concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are reserved! Godpezgud Usfx Aixeka

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning length: 700 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, overall weight: 7,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Max.: 210 mm Bench turning diameter: 400 mm Max. machinable length: 700 mm X/Z travel: 192/700 mm Gkjdpszhwnrofx Aixea Stroke against spindle (W-axis): 730 mm C-axis: 0.001° Rapid traverse X/Z: 30/32 m/min Main spindle speed: 5000 rpm Motor: 11/7.5 kW 2 turrets: 12 stations Machine dimensions: 2700 x 2000 x 1980 mm Machine weight: 7000 kg Equipment: 2 turrets, 12 stations, VDI 30 Measuring tool IRCO SiMag

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. Gedpfx Asztwx Uoixska This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Year of construction: 2007, condition: used, Temperature range 140 °C heating capacity 8 kW Cooling capacity 30 kW range L-W-H 0,70x0,20x0,50 mm weight of the machine ca. 48 kg HB-Therm HB-140 U1 Series 4 Temperature Control Unit – Water up to 140°C --> Definition and structure Godpfx Aijzpbipsxska

Year of construction: 2005, condition: used, Temperature range 140 °C heating capacity 8 kW Cooling capacity 30 kW range L-W-H 0,70x0,20x0,50 m weight of the machine ca. 48 kg Gkjdpfxjzpbiie Aixsa HB-Therm HB-140 U1 Series 4 Temperature Control Unit – Water up to 140°C --> Definition and structure

Condition: used, Year of construction: 2008, Control OKUMA OSP-P200M. Cooling threw spindle. Rotating axe A Tsudakoma 250. Chip conveyor RENISHAW OMP40 Tool probe Velikost upínací plochy 1000 x 460 mm Gsdpszqtbgjfx Aixjka Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Spindle revolutions 50 - 8000 rpm DIN 40 Number of tool positions 48 Machine dimensions 2805 x 2160 x 2746 mm Machine weight 7100 kg