Used Ostas Plate Bending Machine - 4 Rolls for sale (104,884)

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Todpfxoy Aubue Aklea Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 150 mm, roller (top) diameter: 170 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 1,500 kg, total length: 2,500 mm, total width: 800 mm, total height: 1,100 mm, power: 5 kW (6.80 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, PLATE ROLL 2000x6 mm SERGI 3ROLL INITIAL PINCH ASYMMETRIC 2050 X6 MM Rolls length 2050 mm -Top roll 170 mm -lower/Side rolls 150 mm -Power electric 5,5 Hp Capacity -plate width 2000 mm -plate thickness 6 mm with prepinch Configuration on the machine -Rollers surface hardened high strength -Central rolls driven electric rotation on gearunit -side roll electric run with prepinch Pinch roll position with handwheel Front open manual drop-end -Readout gauge of side bending roll -Foot-pedal electric rollers rotation back/forth -Joystick electric control of side roll Tjdsx Ewa Eepfx Aklea -Safety installations with emergency stop.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine Tjdpey Tbf Iefx Aklea See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Model Famar CPI4/6 CAPACITY Tsdpfexnmb Iex Aklea plate width 4000 mm plate thickness 8 mm pre-bending 6 mm --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells Tjdpfx Akew Hpzwelsa speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: used, Year of construction: 1958, machine/vehicle number: 197, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller length: 1,100 mm, sheet thickness steel (max.): 2 mm, overall weight: 750 kg, total length: 1,650 mm, total width: 1,000 mm, total height: 1,750 mm, input voltage: 400 V, Equipment: foot remote control, hardened rollers, Type: 3-roll plate rolling machine / bending machine Construction: Robust, fully steel construction ("all-steel") for high durability and rigidity. Versatility: Suitable for both sheet metal and profile bending, including conical bending. Tedpfx Ajy Spbheklsa Application: Widely used in heavy industry.

Condition: used, functionality: fully functional, Year of construction: 1971, For sale: this four-roll plate rolling machine, type VRM HY 3000/18. The machine is connected and can be tested. Weight: 24,000 kg. Todoxwqdropfx Akloa

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Tsdpfx Ajycu E Eekloa Width:1900mm Height:2200mm Weight:2900kg

Year of construction: 2024, condition: new, Control unit – with NC control Conical bending unit Side roller positioning synchronized electronically via PLC Safety mechanism for welding (welding capability) on the machine Machine body made of stress-relieved, annealed steel 4-roller drive system – upper and lower rollers driven by hydraulic motor via planetary gearbox, synchronized (ᐳ 430 mm) Tedpfx Akedzzyfolsa Electrical and hydraulic protection against overloads Lower roller pressure hydraulically adjustable Hydraulic roller brake, prevents the sheet metal from slipping back Hydraulic pivoting of the upper roller bearing for easy removal of the formed sheet metal Safety wire Induction-hardened rollers (HRC 54), manufactured with a slight bulge Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Upper roller: 230 mm Lower roller: 210 mm Maximum roller spacing: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: Todpfx Akey Twfqolja - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, side roll diameter: 190 mm, working width: 1,550 mm, sheet thickness steel (max.): 9 mm, number of digital displays: 2, Equipment: cone bending device, emergency stop, hardened rollers, swiveling upper roller, – Capacity 1550 x 9 mm – Electrically adjustable rear roller – Electrically adjustable lower roller (material clamping) – Digital display for rear roller movement – Digital display for lower roller movement (material clamping) – Hardened rollers – Conical rolling – Swing-out upper roller – Braking motor – Emergency stop Todpfx Aey Rh H Tsklsa – Documentation – 400V

Condition: good (used), Manufacturer: TIRA Rauenstein Year of manufacture: Type / Model: 1,000 x 2 Working width: 1,050 mm Material thickness: 2 mm Material thickness (non-ferrous metals/wire): 5 mm Tsdpfx Akoyl Ih Sslea Roller diameter: 63 mm Roller diameter, front lower roller: 30 mm Footprint: 1,450 x 370 mm Accessories / Equipment: Condition: good Weight: 290 kg Dimensions: 1,600 x 600 x 1,100 mm NOTE: Machine is located in 48301 Nottuln

Condition: good (used), sheet width: 1070 mm Todpfxjg Rypmj Akloa plate thickness: 1,6 mm roll dia. top roll: Ø 70 mm roll dia. bottom roll: Ø 70mm weight of the machine ca.:t dimensions LxWxH: 1,9 x 0,6 x 1,12 m - upper roll can be swing out - operation via hand wheel

Condition: good (used), 3-Roll Plate Rolling Machine Type R55 Todsy Rx Dcspfx Aklsa Working length 1020 mm Maximum sheet thickness 1.25 mm Good, fully functional condition.

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device Todoyvvrbopfx Akloa - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks Tedpfoy Ez A Rjx Aklja - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, working length 2050 mm 2.0 mm max. wire thickness 3.0 mm Todpfxjyv N Dwj Aklea Underfloor 110 mm motor strength 165 mm motor strength 22 kW bending speed 5.2 mm/min length 3150 mm height 1150 mm width 850 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 6 mm pre-bending 5 mm upper roll diameter 200 mm Todpfx Akjyv Nf Ijloa min. bending diameter Ø 300 mm bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg dimensions of the machine ca. 4800x1300x1270 mm

Condition: new, sheet width 1050 mm plate thickness 3,3 mm Tjdpfxsyv Nfbe Akloa pre-bending 3,0 mm roll diameter 90 mm min. dia. 130 mm total power requirement 1,1 kw weight of the machine ca. 570 kg dimensions of the machine ca. 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1050 mm plate thickness 1,8 mm Todpfxsyv I U Ij Akloa pre-bending 1,5 upper roll diameter 70 mm min. dia. 105 mm total power requirement 1,1 kW weight of the machine ca. 320 kg dimensions of the machine ca. 1700x700x1100 mm

Condition: new, sheet width 1050 mm plate thickness 1 mm roll diameter 56 mm Tedpfxsyvvn As Aklja dimensions of the machine ca. 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 4,0 mm distance between columns 2100 mm roll diameter 150 mm Todpfxoy Ezzye Akloa total power requirement 7,0 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm Tsdpfx Asxaawgoklea roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm Todpsxacdvofx Aklja side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Technical Data: Machine type: Profile Bending Machine Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Condition: As-new, fully refurbished and upgraded Tsdpfx Akoy Exdfjlsa Warranty: 2-year warranty on electronics Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.