Used Otinus In Stock Dust Collector 11 Kw for sale (62,133)

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -for: paint wall, paint booth -Motor: Explosion-proof Credpfxeca Iaro Adrjh -Engine power: 5.0 kW -Speed: 1455 rpm -Inlet connection: Ø 430 mm -Outlet connection: Ø 450 mm -Impeller: Ø 660 mm -Dimensions: 1350/900/H1240 mm -Weight: 236 kg

Condition: refurbished (used), Used AGTOS three-phase motor with 11 kW power, flanged design. The motor was overhauled and tested in March 2026. Manufacturer: AGTOS Type: 1PC38041DA234CT0 Motor number: 15/253398/7 Motor type: Three-phase motor Power: 11 kW Rated speed: 2955 rpm Rated voltage: 400 / 690 V Rated current: 19.6 / 11.3 A Frequency: 50 Hz Crjdpfszuf U Hex Adroh Power factor cos φ: 0.89 Rated efficiency: 91.2 % Efficiency class: IE3 Frame size: 160M Design: B5 Protection class: IP55 Insulation class: F Operating mode: S1 Number of poles: 2 Weight: 84 kg Bearing, drive end: 6211-2ZC3 Bearing, non-drive end: 6309-2ZC3 Lubricant: Unirex N3 Condition: used, overhauled and tested Overhaul: March 2026

Condition: excellent (used), Year of construction: 2013, radial fan, dust extraction blower, fan, extraction, dust blower -Manufacturer: TEKA, radial fan in soundproof container -Motor: 22 kW -Speed: 1460 rpm -Volume flow rate: 20,000 m³/h -Pressure: 3,000 Pa -Fan wheel: Ø 720 mm -Inlet connection: Ø 500 mm -Outlet connection: Ø 500 mm -Dimensions: 2150/1770/H2300 mm Credpfszunw Rsx Adrsh -Weight: 1051 kg

Condition: good (used), empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 03/2022 Tare weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible gross weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles! -- STEEL FLOOR! -- Aluminium chassis Csdpfovx E N Asx Adrorh -- Volume: approx. 92 m³ -- Reinforced walls, continuous interior side aluminium wear plates -- Aluminium body -- Swing rear doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Standing platform at front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 Tread approx. 70% / 80% / 90% -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Looking to trade in your used trailer? We will gladly accept it on trade-in upon agreement. This offer is subject to change and non-binding. Errors and prior sale excepted.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU / FSCUT, laser type: fiber laser, laser source manufacturer: MAX, laser source model: MAX 6kW, laser power: 6,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 360 mm, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,080 mm, travel distance Z-axis: 360 mm, cutting speed: 20,000 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 3,000 kg, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 5,654 kg, total length: 8,440 mm, total width: 2,270 mm, total height: 2,340 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF3015H 6kW Fiber Laser Cutting Machine – Available Immediately from Stock in Germany The SENFENG SF3015H 6kW is a powerful and efficient fiber laser cutting machine for professional sheet metal processing. With a working area of 3000 × 1500 mm, it is ideally suited for metal fabrication companies, job shops, and industrial manufacturers who require high cutting speeds, stable accuracy, and reliable production performance. The machine is equipped with a 6kW fiber laser source and is suitable for cutting stainless steel, structural steel, aluminum, brass, and other metal sheets. Depending on the material, gas type, and cutting requirements, thin to thicker sheets can be processed precisely and with clean cut quality. The H-series features a fully enclosed design and a dual shuttle table. This increases operational safety and reduces loading and unloading times. The heavy-duty, thermally insulated hollow bed ensures high stability and a long service life. The high-strength aluminum beam supports fast, dynamic movements. The intelligent spiral vacuum extraction system improves smoke extraction and contributes to a cleaner production environment. Technical highlights: • Working area: 3000 × 1500 mm • Laser power: 6kW • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability accuracy: ±0.02 mm • Maximum speed: up to 200 m/min • Maximum acceleration: 2G • Maximum table load: 3000 kg • Machine dimensions: approx. 8440 × 2270 × 2340 mm • Power supply: 3-phase 380V / 50Hz • Fully enclosed design • Dual shuttle table • Automatic gas distribution system • Intelligent CNC cutting system with process database • TÜV-CE certified The automatic auxiliary gas selection and pressure control are performed via the CNC program. This reduces manual effort and supports stable cutting quality. The intelligent, bus-based CNC system integrates motion control, laser source control, and gas control, enabling easy operation and efficient cutting. The machine is currently in stock at SENFENG Germany and is available for short-term delivery. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and on-site technical service. In addition, SENFENG Germany maintains a local spare parts warehouse to enable quick service support and reduce potential downtime. Crsdpfx Adok R T Nmjreh The SF3015H 6kW is a strong solution for companies looking for a modern, high-performance laser cutting system with local availability, TÜV-CE certification, and professional service in Germany.

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Credpfx Adewrkcteroh Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 360 mm, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,080 mm, travel distance Z-axis: 360 mm, cutting speed: 200 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 3,000 kg, power: 12 kW (16.32 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 6,230 kg, total length: 8,240 mm, total width: 2,270 mm, total height: 2,340 mm, warranty duration: 12 months, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF3015H 12kW Fiber Laser Cutting Machine – Available Immediately from Stock in Germany The SENFENG SF3015H 12kW is a high-performance fiber laser cutting machine for professional sheet metal processing. With a working area of 3000 × 1500 mm, it is ideal for metal fabrication companies, industrial manufacturers, and job shops that require high cutting performance, reliable precision, and efficient production. The machine is equipped with a 12kW fiber laser source and is suitable for cutting stainless steel, structural steel, aluminum, brass, and other metal sheets. Depending on the material, gas type, and cutting requirements, it offers strong cutting performance for medium and thicker sheet metal thicknesses. The SF3015H series is designed as a high-performance platform and can be configured with laser powers up to 30kW. This makes the series suitable for companies with increasing production requirements. Your advantages: • Working area: 3000 × 1500 mm • Laser power: 12kW • Series available up to 30kW • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability: ±0.02 mm • Maximum speed: up to 200 m/min • Maximum acceleration: 2.8G • Maximum table load: 3000 kg • Machine dimensions: approx. 8440 × 2270 × 2340 mm • Fully enclosed design • Double exchange table • Heavy-duty, thermally insulated hollow bed • Intelligent spiral negative pressure extraction system • Automatic gas distribution system • CNC cutting system with process database • TÜV-CE certified Crjdpfx Aowpq Dredrsh The fully enclosed design increases operational safety. The double exchange table reduces loading and unloading times and supports a more efficient production process. The robust hollow bed and high-strength aluminum beam ensure stable operation and long-term cutting accuracy. The intelligent extraction system contributes to a cleaner production environment. The machine is currently in stock at SENFENG Germany and is available for short-term delivery. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and on-site technical service. In addition, a local spare parts warehouse is available in Germany to enable fast service support and reduce potential downtime. The SF3015H 12kW is a powerful solution for companies looking for a modern, readily available laser cutting system with TÜV-CE certification and professional local service in Germany.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system Credpfxjryalie Adroh -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Condition: good (used), Year of construction: 2001, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: VEM 3,6 kW 1430 U/min Ex protected -Fan wheel: Ø 580 x 180 mm -Connection: inlet Ø 395 mm -Connection: Output 280 x 485 mm -Dimensions: 825/670/H825 mm Csdevnaabspfx Adrorh -Weight: 118 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 4 kW -Speed: 2850 rpm -Max. Volume flow: 7200 m³/h -Max. Pressure: 120 kp/ m² -Connection input: Ø 450 mm -Connection output: 400 x 400 mm -Impeller Ø: - mm -Dimensions: 1030/930/H1240 mm -Weight: 222 kg Crsdpfx Adsc Ir Dujrjh

Condition: good (used), Year of construction: 2012, functionality: fully functional, cooling capacity: 459 kW (624.07 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,310 kg, input voltage: 400 V, total width: 2,230 mm, total length: 6,150 mm, total height: 2,360 mm, warranty duration: 6 months, Aircooled chiller DAIKIN EWAD460BZSS001 459 KW Cooling capacity: 459 kW / 130.51 tons (12/7 — 35°C) Year of manufacture: 2012 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. McQuay HSW3121QS11YA (screw, inverter) Type of refrigerant: R134А Number of fans: 12 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump LOWARA FCTE80-125/55/P Dimensions: 6.15x2.23x2.36 m. Weight: 5310 kg. Working hours: 46042/51397 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Crodpexhdcvefx Adrjh WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37-315 series is designed for extremely economical operation in every kW class thanks to its unique design concept, making it suitable for a wide range of applications. These compressors with fixed speeds are particularly well suited as base load compressors. Separation system – highest compressed air quality through proven multi-stage separation Air Control P – the intelligence of the compressor; it thinks, monitors and documents. Thanks to the possible internet connection, there are practically no limits to communication. Drive system – highly efficient, reliable direct drive Compressors – powerful, excellent efficiency Cooling unit – large-surface coolers for the lowest compressed air outlet temperatures and optimal coolant temperatures System fan – powerful, efficient, high-performance Drive motor – robust, designed with power reserves ALMiG Direct 75 Year of manufacture: 2010 Csdpfx Adottucgererh Final pressure: 11 bar Motor power: 75 kW Volume flow according to ISO 1217 (Appendix C-1996): 11.58 m³/min Length: 2300 mm Width: 1400 mm Height: 1860 mm Weight: 1970 kg Operating hours: 7637 h Load hours: 6317 h Idle time: 167714 h Total volume delivered: 4,506,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available on request!

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3 kW -Voltage: 380/660 V -Speed: 2870 rpm -Volume flow: m³/h -Connection input: Ø 310 mm Csdpfx Adefdmg Sororh -Connection output: 400 x 200 mm -Dimensions: 1000/680/H1030 mm -Weight: 254 kg

Condition: used, mileage: 131,550 km, power: 75 kW (101.97 HP), first registration: 01/1993, fuel type: diesel, number of seats: 11, gearing type: mechanical, axle configuration: 4x2, overall weight: 5,900 kg, empty load weight: 4,285 kg, maximum load weight: 2,200 kg, emission class: none, color: silver, suspension: steel, tire size: 225/75R16C, wheelbase: 3,700 mm, driver cabin: other, Equipment: ABS, air conditioning, parking heater, Vehicle location: Bovenden, heated mirrors, air conditioning, auxiliary heating, switch 6, ABS (anti-lock braking system), leaf suspension, right side door Wheelbase: 3700 mm Body: Crew van with 11 seats, sliding door on the right and door at the rear Sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Crjdpfovhktfox Adreh

Condition: good (used), Year of construction: 1983, radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa Crsdpfx Adeb A Siujreh -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 20253436, Exhibit in stock immediately available (Plug and Play): RENNER RSK-B 7.5 - 10 bar oil-injected screw compressor with integrated refrigerant dryer with automatic Drain Operating hours: 2 h Year: 2024 Pressure: 10 bar Rated power: 11.0 kW Delivery quantity: 1.54 m³ / min Codpfxetiy Aus Adrorh Sound level: 81 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 1031 x 572 x 803 mm Weight: 243 kg Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower Crjdpjb Ilxdsfx Adrsh -Engine power: 3.6 kW -Speed: 1440 rpm -Volume flow: approx. 6000 m³/h -Inlet connection: Ø 450 mm -Outlet connection: Ø 450 mm -Impeller: Ø 670 mm -Quantity: 1 available -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 88 kW (119.65 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,700 kg, input voltage: 400 V, total width: 1,300 mm, total length: 2,000 mm, total height: 2,000 mm, warranty duration: 6 months, Watercooled chiller EF COOLING EVO 90 WKL770FC 88 kW Cooling capacity: 88 kW / 25.02 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module. Freecooling (Dry cooler is additionally required) Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZR125KCE-TFD-455 (scroll) Type of refrigerant: R407c Hydraulic module: 2 pcs. Grundfoss CM 10-5 + 1 pcs. Grundfoss CR20-2 + 1 pcs. Grundfoss CM15-1, expansion vessel, buffer tank 500 l. Dimensions: 2x1.3x2 m. Weight: 1700 kg. Csdpfxjwlnwuj Adrerh Working hours: 10432/10428/1333/1532 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: S0065457, Screw compressor ALMIG BELT XP 11 - 10 bar (air cooled) Year 2023 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 11 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.55 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 11 kW Operating voltage / frequency: 400/50 V / Hz Cedod Db Ixjpfx Adrsrh Sound pressure level (DIN 45635 T.13): 66 dB (A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 285 kg Compressed air connection: G 3/4 "

Year of construction: 2021, operating hours: 0 h, condition: new, Screw compressor ALMIG BELT XP 11 - 10 bar (air cooled) Crodpog N Ti Tsfx Adrjh include dryer include Ecodrain include 2 Filters include 270 liter tank galvanized Year 2021 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT 11 XP 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.49 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 11 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 67 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 458 kg Compressed air connection: G 3/4 "

Condition: good (used), functionality: fully functional, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Model: J-Series S1 First registration: 03.2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible total weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles - STEEL FLOOR - ALUMINIUM chassis - Volume: approx. 92 m³ - Reinforced walls, continuous aluminium wear plates along the interior sides Credoym En Sepfx Adrsh - Aluminium body - Portal doors - ABS/EBS - SAF axles - Lift axle - Disc brakes - Air suspension - Sliding roof tarpaulin - Standing platform at front wall - Hydraulic lifting and lowering system - Radio remote control - Toolbox - Underrun protection - Spare wheel holder - Tyres: 385/65 R22.5; tread approx. 70% / 80% / 90% - etc. Would you like to visit us? We offer a free pick-up service from Linz train station (4020 Linz). We handle all customs formalities for you. Want to trade in your current vehicle? If we reach an agreement, we are happy to accept your trade-in. This offer is non-binding and subject to prior sale. Errors and interim sale excepted.

Condition: good (used), Year of construction: 1985, radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa Cedscii N Sepfx Adrjrh -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 732 kW (995.24 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,186 kg, input voltage: 400 V, total width: 2,400 mm, total length: 6,700 mm, total height: 2,260 mm, warranty duration: 12 months, Aircooled chiller Emicon 732 kW Cooling capacity: 732 kW (12/7 — 35°C) Year of manufacture: 2023 Options: Hydraulic module Heat exchanger: Shell and tube Refrigerant circuit: 2 pcs. Type of refrigerant: R134a CFU cabinet for compressors OS oil sensor for compressors Compressors: 2 pcs. Bitzer (screw, inverter) Number of fans: 10 pcs. (EC fans) Hydraulic module: 1 pcs. water pump Lowara Dimensions: 6.7 x 2.4 x 2.26 m Weight: 6186 kg. Crjdozhb Icspfx Adreh Working hours: 590 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, This machine can process cables up to 120 mm in diameter – at a rapid 40 meters per minute! A 400-volt power supply and 3 kW output require a three-phase connection. Despite its lightweight construction of only around 220 kg, the machine stands independently and is about the size of a tall household appliance. Key feature: ultra-fast processing of cable diameters between 20 mm and 120 mm. Technical data: Width: 68 cm | Depth: 59 cm | Height: 130 cm | Weight: 220 kg | Speed: 40 m/min | Voltage: 380 V | Power: 3 kW | Cross-section: 20–120 mm Crodpfx Aoy H Ikwjdreh

Condition: used, functionality: fully functional, power: 22.9 kW (31.14 HP), fuel type: diesel, color: orange, operation weight: 2,190 kg, Year of construction: 2016, operating hours: 6,100 h, Equipment: cabin, Hamm HD10 VT combination roller with cabin Year of manufacture: 2016 6,100 operating hours Credpozap Ivofx Adreh 22.9 kW Kubota engine 2,190 - 3,110 kg Edge-cutting wheel