Used Peak Scientific N110Dr for sale (368)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Rodpfsxyungsx Aizot Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 04/2026, fuel type: diesel, overall weight: 3,225 kg, color: black, gearing type: automatic, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,976 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Internal number: 21927 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Fixed tow bar * 70 l fuel tank * Metallic paint * Technology Package 6: Exterior mirrors with integrated indicators, electrically adjustable, heated, and foldable * Audio system with 13-inch multifunction display, Ford SYNC 4 including navigation and Blind Spot Assist incl. CTA rear emergency braking assistant, Pre-Collision Assist, camera and radar-based driver alert, Lane Keeping Assistant and Lane Change Assistant, Traffic Sign Recognition, Wrong-Way Driver Warning, Front and rear Park Pilot System, Adaptive Cruise Control with Stop&Go * 360-degree camera system * Sensico steering wheel in leather look Rsdpfeynqdnex Aizjt * Wheels: All-season tires (winter-approved) R16. The tires are marked with the "3 Peak Mountain Snow Flake (PMSF)" symbol, making them certified for winter use. ADDITIONAL FEATURES * 2-stage unlocking passenger compartment/cargo area * Electronic ABS with EBD * Driver's airbag * Exterior mirror housings in black-grey plastic * Battery: H7 AGM single battery * Flat roof * Roof console * Double rear wing doors (without window), 90 degrees, unlockable up to 168 degrees * Tachometer * Third brake light * Electronic safety and stability program (ESP) – Hill start assist – Emergency Brake Assist (EBA) – Traction Control System (TCS) * Electric front windows * Electronic parking brake * Heated windscreen * Rubber floor mats (front) * Transmission: 8-speed automatic * Grab handles (driver and passenger side) * Lockable glove box lid * Front interior lighting * Automatic climate control * Headrests (3) * Load compartment lighting (LED) * Small center console * eCall emergency call assistant for transmitting an emergency call in case of an accident or manual activation * Particle filter: Diesel particulate filter * Radio accessories: 4 speakers * Full wheel covers * Tire repair kit * Tire pressure monitoring system * Wheels: Steel 6.5J x 16 with 215/65 R16 * Gear lever on steering column * Rain sensor wipers * LED dipped beam headlights * Sliding door rear, right * Rear mud flaps * Front mud flaps * Power steering * Seat belts * Seat Package 11A – Driver's seat, 4-way manual adjustment – Dual passenger seat with through-loading hatch, fixed – Lumbar support for driver – Plus Style fabric upholstery, seat center panel in Black Onyx, rest in Ebony * Start-stop system * Ford Power start function * Front and rear bumper partially painted in body color * Partition wall (metal) without window * Door handles in black-grey plastic * Recirculation heater * 8 tie-down points * Immobilizer * Heat-insulating glass, lightly tinted * Central locking with remote control ... and much more. ---- Single ownership. German specification. Subject to errors and prior sale. 2 years’ manufacturer warranty from initial registration (extendable upon request). We are happy to accept your vehicle as a trade-in. Financing/Leasing available even without down payment! Any questions? We are happy to advise you! As, despite existing checks, deviations of the vehicle from the above description cannot be completely ruled out, please note that this vehicle description serves only for the general identification of the vehicle and does not constitute a warranty as defined by sales law. The terms stated in the order confirmation or purchase contract alone are binding. The exact equipm

Condition: used, functionality: fully functional, Year of construction: 2019, type of input current: AC, input voltage: 240 V, input current: 13 A, input frequency: 60 Hz, We are offering this used 3D printer Stratasys Objet350 Connex3, year of manufacture 2019. Model: Objet350 Connex3 Serial Number: 370192 Rodpfx Aeyzq Nleizot Year of Manufacture: 2019 Supply Voltage: 100–120 V Supply Voltage: 200–240 V Rated Current: 13.5 A Rated Current: 7 A Frequency: 50–60 Hz Number of Phases: 1 Short-term Peak Current: 1000 A If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: used, This listing is for 1 of 4 Watson Marlow 323 Peristaltic Laboratory Pumps Each unit is in full working condition and is ready for immediate use Rsdpfx Aisygmdhozet The Watson-Marlow 323 is a peristaltic laboratory and process pump designed for precise, controlled fluid movement, dosing and metering of liquids in scientific, pharmaceutical, biotechnological and industrial environments. It works by mechanically squeezing a flexible tube in a circular “rolling” action — this moves the liquid without it ever contacting internal pump parts, which reduces contamination and wea

Condition: used, This listing is for the Semper Safehood 120 The unit is in full working condition and is ready for immediate uses Dimensions 1200mm L x 710mm D x 1200mm Ht The Semper Safehood 120 is a robust and reliable safety cabinet engineered to provide a secure environment for handling hazardous chemicals, powders, and biological agents. Combining high-efficiency filtration with ergonomic design, the Safehood series is a staple for laboratories prioritizing operator safety without compromising on workflow efficiency. Key Features & Benefits: Advanced Containment: Specifically designed to capture and filter harmful vapors and aerosols, keeping the breathing zone of the operator clear and safe. Rodpfx Asyu T H Sjizjt Optimal Visibility: Features large transparent side panels and a clear front sash, ensuring the user has a full, unobstructed view of their delicate work. User-Centric Ergonomics: The spacious 120cm internal width provides ample room for equipment, while the low-noise operation reduces fatigue during extended use. Easy Maintenance: Built with smooth, chemically resistant surfaces that allow for rapid decontamination and easy cleaning between different applications. Reliable Monitoring: Includes built-in safety alarms and airflow monitoring to ensure the unit is always performing at peak protective levels.

Condition: ready for operation (used), functionality: fully functional, 1 x Watkiss Nearline Powersquare 224 – Booklet Maker, e.g. for Xerox Digital Presses / Booklet Production Ready for immediate dispatch from warehouse in Flensburg – ideal for streamlined booklet production with Xerox systems, both online and offline integration possible. Counters: 1. Books: 1,109,917 2. Sheets: 8,905,801 3. Stitches: 2,735,224 Compatible For: • Xerox iGen Series • Xerox Nuvera Series • Xerox Color 800i/1000i Presses • Xerox Versant 2100 • Xerox Color 8250 Manufacturer: Watkiss Model: 224 Rodpfx Aowf Rxusizst Configuration Includes: - Watkiss PSQ224 Main Body RA - Watkiss Bridge Link R4 - Watkiss Bridge Frame Cover - Watkiss Power Stack 200 (book stacker) - Watkiss PBS Care Kit - Watkiss PSQ 2-Knife Trimmer - Watkiss P2T/PBS Interface Kit - Watkiss P2T/PBS Trim Conveyor Kit - Watkiss Travel Base The Watkiss PowerSquare 224 is a complete professional booklet making system for both digital and offset printing environments, offering three modes of operation: inline, nearline, or offline. This machine integrates four processes—stitching, folding, spine forming, and trimming—in one unit to produce SquareBack booklets up to 224 pages. Features fully automatic setup for different booklet sizes and page counts, including adjustable stitch leg length for variable spine thickness. For inline workflows, compatible with major digital press manufacturers (e.g. Kodak, Canon, Konica Minolta, Xerox, Ricoh) providing seamless production finishing solutions. Engineered for high-volume, reliable production and ease of operation—designed for extended runs with minimal operator intervention. Maximum booklet thickness: 0.39” (using 50 x 80 g/m² sheets). Suitable for booklets from 8 to 224 pages with a single device. Duty Cycle: • Average monthly volume: 50,000 books • Peak monthly volume: 150,000 books Electrical: 50 Hz First Installation: 2019 (Year of Manufacture: 12/2018) Books/booklets produced: 700 (from Xerox Showroom) Availability: Immediately Inspection welcome in Northern Germany. Condition: Fully tested, under service contract since new, and very well maintained. English manual available. Only for sale to business customers (B2B only). Video link available on request.

Condition: used, This listing is for One Agilent Keysight E36103ADC Power Supply (More Available) These unit is are all in full working condition and is ready for immediate use Overview: Keysight E36103 Model: E36103 DC Power Supply Output: 20 V, 2 A, 40 W Successor to the older E36103A, which is now obsolete Key Features: High programming accuracy: Voltage: ±(0.05% + 7 mV) Current: ±(0.05% + 1 mA) Ripple & noise: Voltage: 0.8 mV rms, 15 mV peak-to-peak Current: ~1 mA rms Keysight Technologies Readback accuracy: Voltage: ±(0.05% + 5 mV) Current: ±(0.05% + 1 mA) Keysight Technologies Compact form factor: 2U ¼‑rack width, compact bench size with 3.7 kg weight Farnell UK Display & controls: High-contrast OLED screen visible from various angles Rsdpfx Ajxhfcksizot Intuitive rotary knob and front-panel interface for quick digit‑by‑digit adjustments Connectivity: USB and LAN (LXI Core) Supports BenchVue for intuitive control, data logging, and automation Protection features: Overvoltage, overcurrent, and overtemperature safeguards included

Condition: used, This listing is for the Labcold RLDF1019 Refrigerator The unit is in full working condition and is ready for immediate use Rjdeyuycgepfx Aizet The Labcold RLDF1019 laboratory refrigerator is designed for the safe and reliable storage of temperature-sensitive laboratory materials such as reagents, samples, and biological media. Built specifically for laboratory environments, it provides stable temperature control and dependable performance to protect valuable contents. Unlike domestic refrigeration units, the RLDF1019 is engineered to meet laboratory storage requirements, ensuring consistent cooling and improved air circulation. This helps maintain uniform internal temperatures, reducing the risk of temperature fluctuations that could compromise sensitive materials. The refrigerator features an efficient cooling system, robust construction, and a practical internal layout that maximises usable storage space while keeping samples well organised and accessible. Its energy-efficient design also helps laboratories maintain lower operating costs while ensuring reliable daily operation. Ideal for research laboratories, universities, healthcare facilities, and industrial testing environments, the Labcold RLDF1019 offers dependable refrigerated storage for a wide range of scientific applications

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Rsdpfeywwrfjx Aizet Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Year of construction: 2018, operating hours: 35,069 h, condition: ready for operation (used), product length (max.): 4,400 mm, number of axes: 4, Vacuum Reflow System VAC-L Plus manufactured in 2018. It features a comprehensive heating configuration with 5 preheating zones and 4 peak zones, along with a vacuum chamber measuring 450 x 510 mm. The typical conveyor speed is 1.3 m/min, and it includes a single lane chain conveyor. If you are looking to get high-quality reflow capabilities, consider the SMT Vacuum L Plus Vac machine we have for sale. Contact us for further details. • Heating configuration: 5 x preheating zones, 4 x peak zones, 1 x vacuum chamber • Cooling configuration: 3 x zones standard (up to 5 optional) • Typical conveyor speed: 1.3 m/min • VAC cycle time: approx. 38 s per lane • Vacuum chamber dimensions (L x W): 450 x 510 mm (max. product) Rodpfx Asywg Ngjizjt • Vacuum chamber cycle time extension: approx. 8–13 s • Process gas cleaning: 3 x high-temperature ABS • Fan speed control: Infinitely variable via frequency converter (5 pcs total) • UPS voltage: 24 V • Nitrogen residual oxygen display: DRSM011 • Nitrogen measurement display: PC monitor • Conveyor type: Single-lane chain conveyor (pin chain) • Conveyor width: 65–510 mm • Conveyor rail: Fixed rail front (Rail 1) • Chain pin length: 3 mm • Center support height/drop: 10 mm / 10 mm • Network interface: Ethernet • Handling interface: SMEMA (IPC/SMEMA-STD1) • Cooling zone lengths: Zone 1 = 585 mm; Zone 2 = 473.5 mm; Zone 3 = 473.5 mm • Cooling water requirement: < 15°C and 15 l/min • Barcode interface: RS232 • Monitoring sensors: PT100 (Guard software) Additional equipment • Included: Not specified • Option compatibility (not included unless stated): • Nitrogen options: RE0004, RM0002, VA0002, RE0005 • Cooling options: RE0026, RE0066, RE0067, RM0008 • Process monitoring options: RE0007, AL0011

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 700 h, travel distance X-axis: 200 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, coolant supply: 80 bar, rapid traverse Z-axis: 120 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 120 m/min, rotational speed (max.): 25,000 rpm, rotational speed (min.): 1 rpm, Equipment: chip conveyor, documentation/manual, 4 Machines Available with identical configuration. Each machine ahs less than 700 spindle hours !!! Horizontal twin-table machining center with 2 spindles SPECIAL MACHINE FEATURES -Monobloc design -Linear and torque motor in the feed axes -Gantry drive in the Y axis -Mass optimized machining unit Box-in-open-Box -Workspindle optionally with HSK A40 or HSK E40 taper -Double swivel carrier with 2 integrated rotary axes for in-cycle loading / unloading -Trend-setting technologies that boost energy efficiency -Central workstation Rsdsu Im Enjpfx Aizot Description The BA W02-22 is a horizontal, twin-spindle machining center. Mainly used for 4- and 5-axis machining of small non-ferrous metal workpieces. The linear and torque motors of the feed axes guarantee with a maximum workpiece accuracy, the highest possible dynamics and very short non-productive times. In order to ensure loading and unloading in parallel to the machining time, the BA W02 is equipped with a double swivel trunnion Linear motors The use of linear motors in the feed axes X, Y and Z makes it possible to achieve speeds of 120 m/min (X- and Y-axis) and accelerations up to 22 m/s² (Z-axis). Linear motors have significant advantages over conventional drives with ball screws in terms of energy, wear and noise emissions. Three-phase synchronous motors are used in the BA W02-22. Workspindle Two different motor spindle types are available with HSK 40 interface for the BA W02-22. HSK A40, 25,000 rpm: This synchronous motor spindle features high dynamics. It has a core spindle with a very low mass moment of inertia. This allows for a very short run-up time to a maximum speed of 25,000 rpm with a constant high torque. This results in a consistently short chip-to-chip time over a speed range up to 10,000 rpm and best times for thread cutting. TECHNICAL DESCRIPTION OF STANDARD MACHINE - BA W02-22 WORKING RANGE linear axes Spindle distance 250 mm X axis 200 mm Y axis (tool change position) 350 mm (525mm) Z axis 300 mm WORKPIECE CARRIER A/U Swivel carrier system with plane surface gear teeth (Q-axis) Swivel time 0° / 180° 2.25 s Max. asymmetrical loading Repeatability accuracy relative to 500 mm 0.005 mm Two independent rotary axes (A-axis/U-axis), suitable for holding clamping bridges. The rotary axes, each consisting of a directly driven NC rotary tables with direct and absolute angle measurement and a counter bearing Max. dimension of fixture/workpiece 425mm x 630mm Max. weight of fixture/workpiece 160kg Peak torque (standard) 420 Nm WORKSPINDLE HSK A40 Liquid-cooled motor spindle based on AC synchronous technology Speed range 1-25,000 rpm

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic washing system - ultrasonic cleaning device chamber made of stainless steel 1.4401 (AISI 316L) Redpfx Aslccuzoizot - incl. insulated hinged lid - incl. level control /dry run protection - incl. 1 piece stainless steel basket - floor ultrasound, frequency: 25 kHz, power (eff./peak): 600/1.200 Watt - Heating adjustable up to 80°C; power: 2,600 watts - Basket dimensions: LxWxH 320 x 320 x 280h mm - Basin dimensions: LxWxH 420 x 400 x 350h mm - Outer dimensions: LxWxH 520 x 650 x 850h mm - max. loading weight of the basket: 30 kg - device is mobile

Condition: new, Year of construction: 2026, Ultrasonic washing machine- ultrasonic cleaning device with attached oil separator and insulated hinged cover Rsdedz T Nyspfx Aizst Floor ultrasound, frequency: 25 kHz Power (eff./peak): 750 / 1,500 watts Heating adjustable up to 80 ° C; Power: 4,000 watts Basket dimensions: LxWxH 570x320x250h mm Pool dimensions: LxWxH 650x400x350h mm Dimensions of the device: approx. 1200x550x750h mm max.loading weight of the basket: 30 kg 1 piece of stainless steel shopping cart is included Device is on rollers

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic cleaner with pneumatic fabric lift and oscillation during the cleaning process. including surface wash-off/ oil separator basket useful dimensions: approx. 500x300x250 (h) mm 1 stainless steel basket included max. loading weight goods lift: 50 kg Rodpfx Ash Rmpdsizet volume: 150 liters (incl. oil separator) material of the tray and outer cladding: stainless steel 1.4301 ultrasound as floor sound: 1.500 Watt (eff.) / 3.000 Watt (peak) Multifrequency: 25/50 kHz (switchable), therefore optimal for all kinds of metals (also aluminum and non-ferrous metals) including level control and dry run protection unit is equipped with rollers (mobile) Connected load electrical (total): 7 kW Year of manufacture: June 2022 outside dimensions: 1.150x800x900(h) mm total height incl. goods lift and opened lid: 1.450 mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 41,569 h, controller manufacturer: AMADA, controller model: AMNC 3i, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, number of axes: 4, This 4 axis CO2 laser cutting machine was manufactured in 2013 and features a powerful 4000 W Amada Fanuc AF4000i-c laser source. With a 3070 x 1550 mm travel range and a rotary index unit for tube processing, it is also equipped with the AMNC 3i control unit and a pallet changer for enhanced productivity. If you are looking to get high quality cutting capabilities, consider the AMADA FO-3015 II RI machine we have for sale. Reach out for more information. • Laser Type: CO2 Laser, AC-HF excited, fast axial flow • Laser Output: 4000 Watts (Continuous), 5000 Watts (Peak) • Optical system: Flying optics • Travel Range (X x Y x Z): 3070 x 1550 x 200 mm • Max. Table Load: 920 kg • Max. Material Thickness (Mild Steel): 20 mm • Positioning Speed: 80 m/min (X/Y), 60 m/min (Z), 113 m/min (simultaneous) • Positioning Accuracy: ± 0.01 mm / 500 mm • Positioning Repeatability: ± 0.005 mm • Control unit: AMNC 3i (21.5-inch screen) • Laser source type: AO4B-0815-B342 (YOM 2013, S/N L13X40476) • Laser stability: ± 2% • Laser gas consumption: approx. 10 l/h • Laser gas mixture: • CO₂: 5 ± 0.25% • He: 60 ± 3% • N₂: 35 ± 1.75% • Beam mode: approximately TEM₀₀ • Beam divergence: less than 2 mrad • Pulse frequency: 1 – 2000 Hz • Environmental conditions: 5 – 35°C at max. 75% humidity • Temperature range (operating temp.): 25°C (± 1°C) • Laser Wavelength: 10.6 µm • Laser Gas Consumption: approx. 10 l/h • Power Consumption: 12-59 kW (average for entire system) • Rotary Index (RI): Integrated capability for tube/profile processing; RI unit present per documentation • Power requirement (main unit nameplate): 200V, 50/60 Hz • Machine Weight: 13,550 kg Rodpsyv Ak Dofx Aizet • Oscillator nameplate: Model AF4000i-C, weight 1200 kg • Main unit nameplate: Model FO3015IIRI • Last service by Fanuc: January 5, 2023 • O-rings on the laser tube replaced • Internal mirrors replaced • Turbo-blower replaced Additional equipment • Pallet changer: LST3015 RI (YOM 2017, S/N 30153398) • Power supply/Transformer: TG513 (S/N 987/13) • Cooling/Extraction unit: PC5011FOm24kw (S/N 7196850001) • VPSS 3i Tube Full Solution Pack software • Steel-Prisma table support • Rotary Index pipe cutting unit

Condition: good (used), Year of construction: 2024, functionality: fully functional, Ultrasonic cleaning device with pneumatic fabric lift and oscillation during the cleaning process including surface rinsing / oil separator cascade Usable platform dimensions: approx. 1,100 x 600 x 400 (h) mm Max. loading weight of goods lift: 100 kg Volume: 750 liters (incl. oil separator) Material of tub and outer cladding: stainless steel 1.4404 Ultrasound from 2 sides (front/bottom): 5,000 watts (eff.) / 10,000 watts (peak) Multi-frequency: 20/40 kHz (switchable), therefore ideal for all types of metals (including aluminum and non-ferrous metals) Rjdpfx Aijtpp Dxezjt Including level monitoring and dry-running protection Device is equipped with adjustable feet Electrical connected load (total): 22 kW Year of manufacture: April 2024 External dimensions: 1,870 x 1,140 x 950(h) mm

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Electrical power: 10.55 kW Redsv U A Izepfx Aizet Includes: - Automatic pneumatic goods lift - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration system from the Glogar Technology Center, available immediately

Year of construction: 2014, condition: ready for operation (used), Thermo Scientific Heraeus Multifuge X3R TX 750 Refrigerated Centrifuge 2014 No. 886 Max. speed: 15,000 rpm Max. RCF: 25,155 × g Max. capacity: 3,000 mL Max. kinetic energy: 62,836 Nm Year of manufacture: 2014 Temperature range: –20 °C to +40 °C Dimensions: 670 mm x 650 mm x 489 mm (W x D x H) Height with lid open: 940 mm Weight: approx. 125 kg You are welcome to arrange a viewing. We can also organize affordable shipping on your behalf! You will receive a proper invoice. For international customers, a net invoice can be provided, subject to a valid VAT ID number. Rsdpfx Aisyvt Ndjzst Subject to prior sale. Visit our shop and review our other offers. The specified company names and trademarks are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.

Year of construction: 2018, condition: ready for operation (used), Thermo Scientific Heraeus Multifuge X3R TX 750 Refrigerated Centrifuge 2018 No. 898 Max. Speed: 15,000 rpm Max. RCF: 25,155 × g Max. Capacity: 3,000 mL Max. Kinetic Energy: 62,836 Nm Year of Manufacture: 2018 Temperature Range: –20 °C to +40 °C Dimensions: 670mm x 650mm x 489mm (W x D x H) Height with lid open: 940mm Weight: approx. 125 kg You are welcome to arrange a viewing appointment. We are happy to organize low-cost shipping for you. You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Rodoyvt Efjpfx Aizjt Sale subject to prior sale. Visit our shop to view more offers and products. All company names and trademarks mentioned belong to their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the item description may occur and are subject to change.

Condition: used, ELGA PURELAB Option Storage reservoir docking vessel Elga DV 35 The ELGA PURELAB DV 35 Storage Reservoir Docking Vessel is designed for the secure storage and controlled distribution of purified laboratory water. Engineered to integrate seamlessly with ELGA PURELAB water purification systems, it ensures consistent water quality while maintaining system efficiency and reliability. With a 35-litre capacity, the DV 35 provides dependable storage for laboratories requiring a steady supply of purified water for analytical, research, and general laboratory applications. Its robust construction helps protect water integrity, while the docking design allows straightforward installation and maintenance. Ideal for research facilities, quality control labs, and industrial environments, the PURELAB DV 35 enhances workflow by ensuring purified water is readily available when and where it’s needed Rjdpfx Aiexzh Ehozst Recirculation of purified water through our wrap-around reservoir – to maintain consistent peak water purity Optional ELGA Biofilter - when fitted to the Option-Q produces water which is free from biologically active impurities. This makes it suitable for use with applications which require endotoxin free ultrapure water, bacteria-free water, and nuclease-free ultrapure water Type III / RO water available from the reservoir Front-entry service doors for easy and quick access to consumables Data collection capabilities through RS232 interface – for compliance with GLP guidelines Perfect single system solution for analytical and life science applications Delivers up to 15 liters an hour of type I water Up to 18.2 M?-cm, type I water suitable for critical applications Easy to maintain Produces type I water directly from tap water

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: DOCAT 70, We offer this used ozone generator and abatement device Tonello ECOFREE 2, year of manufacture 2018. Machine type: DOCAT 70 Power supply: 3Ph+GND Voltage and frequency: 400V-50Hz Compressed air pressure: bar Hydraulic pressure: bar Maximum steam pressure: bar Weight: 300 kg Drum volume: l Serial number: 07758 Year of manufacture: 2018 Installed power: 4 kW Maximum peak current: 7 A Maximum operating current: 3 A Power cable cross section: 4 mm² Rsdpoyvzznjfx Aizst If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: reconditioned (used), For Sale: EOS M400 – High-Performance Metal 3D Printer This EOS M400, is a cutting-edge metal additive manufacturing system located at the customer’s site. It is equipped with a 1kW laser, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 1kW • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1 • Aluminum alloys: AlF357_1, AlSiMg_1 • Copper alloys: CuCrZr_1, Cu_1 • Stainless steels: GP1_1, PH1_1 • Tool steels: MS1_1, SP2_1 • Titanium alloys: Ti64_1, Ti64ELI_1, Ti64Grade23_1, TiGrade5_1, TiCP_1 • Custom gas options: CustomAr, CustomN2 • Cobalt chrome: MP1_1 Why Choose the EOS M400? • Large build volume for industrial-scale production. • High laser power for enhanced speed and precision. • Wide material compatibility for versatile applications. Redjvq Sm Espfx Aizjt Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Year of construction: 2018, condition: excellent (used), TOMRA T-705 BC Single, used selective waste collection device, MFG: Feb. 2018, serial: 606657-90162001-60642, German language menu, German and English user guide, service history, made in Norway This is a device dedicated to commercial spaces or locations where large volumes of single-use or reusable containers are collected, as well as shuttles with such containers. The TOMRA T-705 selective collection device is fast, being specially designed for heavy traffic and a high demand for the collection of recyclable or reusable containers. SPEED Instant recognition of barcodes and security markers without stopping the rotation Reduced waiting times when inserting containers one after another Increased availability during peak hours CLEANING Rjdpfx Aijwz Rtkjzot Requires less time dedicated to cleaning compared to other RVMs Cleaning the device is easier and takes less time Less time dedicated to cleaning the device, a more attractive device TWO MODELS Device designed for both the collection of reusable and non-reusable containers Device designed for both reusable container crates and non-reusable container crates Both models feature touch display and TOMRAPlus interface Price: 3900 Euro + VAT, negotiable , ExWorks Oradea /Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana.

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical power requirement: 15 kW Rjdpfx Ajxuzyfjizet Includes: - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance - Ultrasonic submersible transducers with dual-side sonication - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x6, wheelbase: 4,775 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, in stock at the dealer. 1x comfort seat, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, navigation system, auxiliary heater, 16-speed manual gearbox, ABS (anti-lock braking system), constant throttle, power take-off, differential lock, work lights, beacon, leaf-air suspension, trailer hitch air+light connections, underride protection, roof hatch, green environmental sticker. Wheelbase: 4775 mm. MAN HydroDrive, medium-high cab design, MAN 16.25 OD transmission, EBS, ABS, ESP, LED daytime running lights, additional water heater 3.8kW, heated passenger seat, heated driver's seat, NN cab, full emergency brake assist, air conditioning, additional water heater 3.8kW, EVBec engine brake, navigation system, KSM, PTO NH221/10, engine-dependent PTO flywheel side, SAE-A 2-hole 9T 16/32, DP f=1.233 100 Nm continuous / 140 Nm peak load. Redpjvhnffjfx Aizet Brand-new vehicle from current stock with day registration on 25.11.2025! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!