Used Pipe Notcher for sale (2,691)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high Bwedsz Ai Tpopfx Ahmou 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: good (used), mileage: 684,130 km, power: 338 kW (459.55 HP), first registration: 01/2011, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro5, Year of construction: 2011, Equipment: AdBlue, electric window regulation, spoiler, = Additional Options and Accessories = - Roof spoiler - Closed cab - Cab = Notes = YV2RT40A2TB557523 Volvo FH 460 EEV 6x2 Manual Euro 5 Auxiliary air conditioning 680,000 km 01-18-2011 Bwsdpfx Ahszqdn Romeu MANUAL Straight exhaust pipes = Further Information = Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Tire size: 385/55R22.5; Lift axle; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Number of cylinders: 6 Technical condition: good Optical condition: good

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) Bodez Hckmepfx Ahmjwu - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, functionality: fully functional, machine/vehicle number: 34163, mileage: 19,900 km, power: 315 kW (428.28 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 14.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, Frontguard Assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling with ring spring (D40), trailer hydraulics, tires: front axle 385/65R22.5, rear axles 315/80R22.5 Bwodpoz Hcppsfx Ahmeu M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with remote control, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breakers, battery master switch, pre-equipment for toll collection, pre-equipment for alcohol tester with immobilizer, air conditioning, cruise control, speed limiter, residual heat utilization, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 14.5 m³ (sludge chamber approx. 13.5 m³ / water chamber approx. 1 m³), water chamber is welded into the front of the tank with inspection opening, 2-way piston lock: water/sludge approx. 2.4 m³/13.3 m³; 4.4 m³/11.3 m³, piston with 2 piston seals and seal pressure regulation, hydraulically upward-opening full-cover lid with hydraulic latch (galvanized) and one suction connection at the bottom and top, sludge chamber level indicator with external scale with divisions of 500 l and internal float, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, discharge chute made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1300 m³/h) hydraulically driven, 4-way valve pneumatically controllable from the control panel, over-suction protection, oil separator, HD pump Pratissoli KF 32H (approx. 120 l/min at 170 bar) hydraulically driven, protection against water shortage, pressure regulation steplessly, small hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 19, 40 m are available, spray gun, suction boom hydraulically pivoting (approx. 270°) with a suction hose DN 100, at the end there is a suction pipe DN 100 with a length of approx. 3500 mm, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash tank 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED rotating beacon light at the rear, reversing camera

Condition: used, mileage: 149,950 km, power: 115 kW (156.36 HP), first registration: 11/2017, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 01/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,963 mm, total width: 2,010 mm, total height: 2,660 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage package, center console with storage compartment, map pocket with cup holder at the front, storage compartment on the dashboard with USB connection, audio system: radio with CD player, MP3 compatible, USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, roof storage compartment with DIN compartment, grab handle on the A-pillar, rear door (opening angle 260 / 270 degrees), automatic climate control, cooling compressor 170 ccm, interior filter: pollen filter, cargo area partition with window, spare wheel with road tires, spare wheel holder between the floor longitudinal members, reversing aid with sensors Additional equipment: Airbag driver side, trailer socket preparation, traction control system (ASR), version: S-series, exhaust pipe on the left side, exterior mirrors electrically adjustable and heated, interior light in the cargo area, electronic brake force distribution, rear axle suspension: leaf spring, front axle suspension: transverse leaf spring, wing doors at the rear, windshield and side windows tinted, generator 150 A, speed limiter system 160 km/h, body/superstructure: high-roof box van, instrument cluster with pixel matrix display, fuel tank: 70 liters, headlight range adjustment, engine 2.3 liters - 115 kW diesel, wheelbase 3520 mm, tire repair kit, low emissions according to Euro 6 emission standard, sliding door cargo/passenger compartment right, seats in the driver's cab: single passenger seat, adjustable in 3 ways, control unit overhang, maintenance indicator, permissible total weight 3.50 t Bwsdpfx Ajz Harbohmeu The vehicle is in good condition! MOT and emissions test valid until 01-2027.

Condition: used, functionality: fully functional, machine/vehicle number: 33124, mileage: 999 km, power: 235 kW (319.51 HP), first registration: 08/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, MAN PowerMatic 08.12.OD torque converter automatic transmission, operated with steering column lever, manual (DNR selector), heated fuel filter, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full-brake assist, emergency brake assist EBA Plus, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, MAN EasyStart hill start assist, exhaust pipe positioned high and to the left behind the cab, lane departure warning LDW, turning assist, MAN AttentionGuard driver alertness system, preparation for alcohol interlock, traffic sign recognition, distance warning, trailer hitch Rockinger 400G150B (40 mm) Bwjdpfx Ahoz Ha Ivemju Cab CC (narrow, short, normal height), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, rain sensor, light sensor, LED headlights, LED daytime running lights, tinted windshield and door windows, lift-up roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multi-function steering wheel, safety automatic, cruise control, digital axle load display (ALM), MAN Media System Navigation Advanced 7-inch with navigation and Bluetooth hands-free system, rear view camera, smoker's package, 2x LED rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, sun visor on driver's door, sun shield Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 11.5 m³ (sludge compartment approx. 10.5 m³ / water compartment approx. 1.0 m³), water compartment is welded into the front of the container with inspection opening, water compartment level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow line, 2x water tanks, each approx. 0.5 m³, on the left/right side of the container made of plastic, rear flap hydraulically opens upwards over the entire cross-section with pipe rupture protection, hydraulic latch locking, sludge compartment level indicator with external scale with divisions every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge apron made of stainless steel, 2 pneumatically operated slide valves, container discharge: free discharge through the lower suction connection or by tipping to the rear, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the control panel, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, hooks on the bottom flap for transporting long continuous hoses, waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the

Condition: used, Year of construction: 2007, Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals Bodpfez Hb Scex Ahmowu - Stainless steel skid frame with mesh safety guarding Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 2,048 h, load capacity: 6,000 kg, lifting height: 5,500 mm, free lift: 1,650 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 28 X 12,5 - 15, overall weight: 13,800 kg, empty load weight: 7,800 kg, total height: 2,600 mm, total length: 2,650 mm, total width: 2,400 mm, color: green, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, hydraulic fork positioner, lighting, pallet forks, # 🚜 COMBILIFT C6000XL | DIESEL | TRIPLEX 5500 MM | FREE LIFT | FORK POSITIONER | FULL CAB | READY TO WORK ✅ FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY Looking for a powerful multidirectional forklift for handling long, heavy, and demanding loads? This 2016 COMBILIFT C6000XL is an excellent solution for timber, steel, manufacturing, and industrial applications. The machine has been fully inspected, serviced, and prepared for immediate operation. ## ⭐ KEY ADVANTAGES ✅ 6000 kg load capacity ✅ Triplex mast – 5500 mm ✅ Full free lift – 1650 mm ✅ Hydraulic fork positioner ✅ Full heated cab ✅ KUBOTA V2403-T diesel engine ✅ Only 2098 operating hours ✅ Super Elastic tires – approx. 100% ✅ Fully serviced and technically inspected ✅ Ready to work immediately ## 🔧 TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: C6000XL Stock No.: W374 Year: 07/2016 Serial No.: 31818 Capacity: 6000 kg Service Weight: 7800 kg Engine: KUBOTA V2403-T Power: 44 kW Fuel: Diesel Operating Hours: 2098 h Mast: Triplex Lift Height: 5500 mm Free Lift: 1650 mm Fork Positioner: Hydraulic Fork Positioner Width: 1360 mm Sideshift: No Forks: 1200 mm Fork Section: 150 × 50 mm Cab: Full / heated Platform: 1200 mm ## 📐 DIMENSIONS Overall Height: 2600 mm Construction / Lowered Mast Height: 2800 mm Overall Length: 2650 mm Overall Width: 2400 mm ## 🛞 TIRES Front: Super Elastic 23 × 10-12 – approx. 100% Rear: Super Elastic 28 × 12.5-15 – approx. 100% ## 🏗️ EQUIPMENT 🔹 Triplex mast 🔹 Full free lift 🔹 Hydraulic fork positioner 🔹 Full heated operator cab 🔹 Working lights 🔹 Fan 🔹 Industrial Super Elastic tires 🔹 1200 mm forks 🔹 1200 mm loading platform ## 🎯 IDEAL FOR 🌲 Timber and wood industry 🏭 Steel mills and service centers 🔩 Pipes, profiles, beams, and panels 📦 Long-load handling 🏗️ Structural steel manufacturers 🏭 Manufacturing facilities 🌦️ Indoor and outdoor operations ## 🤝 WHY FT LOGISTICS? FT LOGISTICS specializes in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. Every used machine undergoes a comprehensive technical inspection, full service, and operational testing before delivery. We provide: ✅ Pre-delivery service ✅ Technical inspection and testing ✅ Warranty ✅ Professional technical support ✅ Leasing and financing ✅ Worldwide transport Bwodpfxez E R R Ej Ahmju ✅ Export and customs documentation ✅ After-sales support 🎥 Live online demonstration available 📸 Additional photos and videos on request 🚛 Custom transport quotation directly to your facility FT LOGISTICS 🚀 We deliver machines that are ready to work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request Bwjdpfez E R Nzjx Ahmeu ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: used, mileage: 890,000 km, power: 350 kW (475.87 HP), first registration: 11/2014, fuel type: diesel, overall weight: 18,000 kg, next inspection (TÜV): 11/2026, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Antos 1848 First registration: 11/2014 890,000 km Bodpfxsz E Udce Ahmewu MOT (TÜV) valid until: 11/2026 Tank inspection valid until: 11/2026 Pipe superstructure Superstructure also manufactured in 2014 Trailer hitch Top and bottom filling Tank capacity: 15,150 liters 2 compartments Bartec system ----Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2,000 EUR Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, mileage: 1,360 km, power: 175 kW (237.93 HP), first registration: 12/2024, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 7,400 mm, loading space width: 2,470 mm, loading space height: 2,450 mm, Year of construction: 2024, Mercedes-Benz Atego 1624 L with TBV refrigerated box, Thermo King T-1300X, and 2,000 kg tail lift – NEW VEHICLE Refrigerated van / refrigerated truck for fresh produce | Diesel & mains power (standby cooling 400 V) | 18 Euro pallets | Side door | Air suspension | Euro 6 (Atego 1524/1624 series) ??? REFRIGERATED BOX ??? NEW, DIRECT FROM MANUFACTURER (TBV, box no. 12763) ??? - Refrigerated box made of solid plastic with reinforced outer and inner laminates, vapor diffusion tight - Internal dimensions approx.: L 7,400 x W 2,470 x H 2,450 mm (approx. 44.8 m³) - External dimensions of the box approx.: L 7,580 x W 2,590 mm, overall vehicle height approx. 3,680 mm - Space for 18 Euro pallets (1,200 x 800 mm) - Wall thicknesses: Roof, floor and front wall 100 mm, rear wall 80 mm, side walls 60 mm - Reinforced front wall for refrigeration unit, incl. cable duct - Aluminum grooved floor, welded with aluminum wear strip (285 mm) - 2-leaf rear doors, stainless steel rear portal, locks and hinges made of polished stainless steel, door fastener - Side door on the right at the front, 900 x 2,000 mm, with door fastener and rain deflector - Fold-out 2-stage step under the side door, step on the underrun protection - 1 row of stainless steel lashing rails on the side walls - 3 LED interior lights, switchable from the cab - LED multi-functional lights at the top of the rear portal - "ButtRoll" impact buffer on the rear portal - Hot-dip galvanized subframe - Conductor pipe for reversing camera prepared - Contour marking on the sides and at the rear - ATP certificate [only if confirmed, see note] Bodpfxez El Npe Ahmswu ??? REFRIGERATION UNIT ??? - Thermo King T-1300X-50, refrigerant R452A - Running cooling (diesel) + standby cooling 400 V (mains operation) - With heating function - Temperature range: [please complete] ??? TAIL LIFT ??? - Dhollandia DH-LM.20, load capacity 2,000 kg, aluminum platform - Platform height 1,800 mm, two-hand control, low-noise hydraulic unit - Roll-off protection for 2 roll containers - Tail lift switch in the cab ??? CHASSIS ??? - Mercedes-Benz Atego 1624 L 4x2, design type 967.027, year of manufacture 12/2024 - Engine OM 936, 6 cylinders, 7.7 l, 175 kW (238 hp), 1,000 Nm, Euro VI E - Mercedes PowerShift 3 (8-speed automatic), driving program economy/power - High Performance Engine Brake - GVW 16,000 kg (front axle 6,100 kg / rear axle 10,500 kg), wheelbase 5,360 mm - Air suspension rear axle with cable remote control, disc brakes all around, EBS with ABS/ASR - Tires 305/70 R 19.5 - Fuel tank 180 l, AdBlue tank 25 l, tanks lockable - 2 batteries 12 V / 165 Ah, generator 100 A - Vehicle according to GSR Phase B ??? CAB & EQUIPMENT ??? - S ClassicSpace cab, extended (2.30 m) - Air conditioning with pollen filter, additional thermal insulation, sunroof - Comfort air-suspended driver's seat with armrests - Cruise control, rain and light sensor, LED daytime running lights - Electric windows, central locking, heated electric main mirror - Radio with Bluetooth and USB - Digital tachograph 2nd generation (Smart Tachograph V2) - FleetBoard Eco Support, Truck Data Center, TruckLive ??? SAFETY & ASSISTANCE ??? - Active Brake Assist 6 - Active Sideguard Assist 2 (turning assistant) - Frontguard Assist - Lane keeping, attention and traffic sign assistant - ESP, tire pressure monitoring, reversing warning system

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets Bedpfxez Dv Uye Ahmowu - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: used, functionality: fully functional, mileage: 22,000 km, power: 405 kW (550.65 HP), gearing type: automatic, fuel type: diesel, color: black, first registration: 07/2024, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, parking heater, traction control, Available from January 1, 2027. Used suction dredger directly from the manufacturer – for purchase or rental. Are you looking for a used suction dredger that is readily available, technically reliable, and economically attractive? At MTS, you will find used suction dredgers directly from the manufacturer – professionally inspected, technically and visually refurbished, and ready for the next job. Currently available: MTS DINO VARIO 8 m³ - SB 1612 on a Volvo FH 6 x 2 Suction unit: Proven quality directly from the manufacturer 6 months warranty 1 year / 500 operating hours maintenance-free Fan operating hours: 652h Compressor operating hours: 670h Standard equipment MTS suction unit MTS double fan MTS material separation system (patented) Automatic filter cleaning, air compressor 4.5 m³/min, 8 bar POWERARM with 7m suction hose 3 stabilizer supports PLC control with pre-installed remote diagnostics Radio remote control (brand: Gross Funk) Storage space Optional modules Container & lid with stainless steel lining Stainless steel version of toolboxes EVO-POWER ARM Rotating suction pipe system IKE/PERFOR Suction & drive & steer HYDROSTAT Bwjdozvw U Uopfx Ahmsu Electric steering Volvo Full cladding DESIGN High-dump HIGH-TIP with 4 supports (2+2) High-pressure water system 30 l/min Vibrators on the suction hose Industrial equipment Industrial package II: Gas sensor Infinitely variable speed control for the fan Filtration unit for the oil circuit Environmental equipment Hydraulic oil, biodegradable Noise reduction package: Sound insulation of the container exterior Accessories - Module Container with 2 pneumatic vibrators Access ladder for the machine house (2x) Ladder under the hose rack Accessories - Lighting Light package II: 2 LED lights on the center joint of the POWERARM Light package III: LED light strips in the toolbox Light package V: LED lights next to the POWERARM shaft Light package VII: Fire brigade lighting 2x Light package VIII: Light bar at the rear Accessories - Safety 4 warning lights Anti-slip coating Accessories - Filter system Filter cleaning with pneumatic vibrator Accessories - Tools Vogt pneumatic shovel Atlas Copco 20 KG hammer Air lance Subject to errors and prior sale. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: used, functionality: fully functional, machine/vehicle number: 33051, mileage: 23,900 km, power: 235 kW (319.51 HP), first registration: 02/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.6 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Bedpfxsz E Nxne Ahmjwu Engine D0836LFLBI, reinforced clutch, MAN Tipmatic 12 12 ODr, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full brake assist, emergency brake assist EBA, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with adjustable stages, lane departure warning LDW, daytime running lights LED, heated fuel filter, trailer hitch Rockinger 400G150B (40 mm), steel bumper Cab C (2240 mm wide, 1620 mm long), air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, tinted windshield and door windows, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multifunction steering wheel, safety automatics, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 rotating beacons on the roof, pre-installation for Toll-Collect, digital tachograph CONTI, connectivity board module (RIO box), sun visor on the driver's door, sun shield horizontal tank, tank wall thickness 6 mm, total air volume approx. 11.6 m³ (sludge chamber approx. 9 m³ / water chamber approx. 1 m³), 1x piston lock, piston with 2 piston seals and seal pressure regulation, water chamber welded into the front of the tank with inspection opening, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, rear flap hydraulically opened upwards over the entire cross-section with pipe rupture protection, manual lid locking by means of toggle closures, sludge chamber level indicator with external scale with graduation every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blanking cap, stainless steel discharge chute, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the operator platform, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 60 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation stepless, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are installed, spray gun, operator platform made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel, tiltable at the rear left, tool box made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights on the right and left of the tank, 1x LED rotating beacon at the rear, reversing camera.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 6,687 h, load capacity: 3,000 kg, lifting height: 600 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,670 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,070 mm, fork width: 150 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 X 10 X 16, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, all wheel drive, front guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT CB3000 – 2011 | 6,687 HOURS | LPG | DUPLEX 4000 mm | FORK POSITIONER | SIDE SHIFT 🚜 🔥 Ready to work from day one – no additional investment, no risk. 🔥 ## ✅ Why choose this forklift? Looking for a machine that will keep your operation running without downtime? This COMBILIFT CB3000 is a proven and fully serviced machine — ready for immediate use with no hidden costs. ✔ Fully serviced (oils, filters, complete inspection of all components) ✔ Technical and visual condition: like new ✔ Only 6,687 operating hours – genuinely low usage ✔ New tires – no additional investment required ## ✅ Key Specifications ✔ Capacity: 3,000 kg ✔ Fuel type: LPG ✔ Mast: Duplex – 4,000 mm ✔ Fork Positioner: 1,400 mm ✔ Fork Length: 1,070 mm ✔ Open cabin ## ✅ Full Technical Specification ### 🔹 General Information ✔ Year of manufacture: 2011 ✔ Operating hours: 6,687 ✔ Capacity: 3,000 kg ✔ Load center: 600 mm ✔ Truck weight: 6,500 kg ### 🔹 Mast & Lifting ✔ Mast type: DUPLEX ✔ Lifting height: 4,000 mm Bwedpez E D Anefx Ahmou ### 🔹 Forks & Attachments ✔ Fork Positioner: 1,400 mm ✔ Fork Length: 1,070 mm ### 🔹 Dimensions ✔ Height: 2,250 mm ✔ Length: 1,550 mm ✔ Width: 1,500 mm ✔ Overall mast height: 2,670 mm ### 🔹 Drive & Tires ✔ Tires: Super elastic (100%) – NEW ✔ Front tires: 16 X 7 X 10 1/2 ✔ Rear tires: 22 X 10 X 16 ## ✅ Equipment ✔ Open cabin ✔ Fork positioner ✔ Side shift ## ✅ Condition ✔ Technical condition: 5/5 – fully serviced ✔ Visual condition: refurbished, like new, corrosion-free ## ✅ Ideal for ✔ Warehouses with narrow aisles ✔ Timber, steel, and pipe industries ✔ Handling long loads ✔ Indoor and outdoor applications ## ✅ What You Are Buying You are not buying a “used forklift.” You are buying a professionally prepared and fully tested machine: ✔ Every forklift undergoes complete testing before sale ✔ Ready for immediate implementation ✔ Online live presentation available ✔ Delivery directly to your company available ## ✅ Delivery & Support 🚛 Transport across Europe 💼 Comprehensive logistics service 💳 Leasing and financing assistance 🛠 After-sales support ## ✅ Why FT LOGISTICS? We deliver forklifts that work — not machines that spend time in service. ✔ Over 100 machines available ✔ In-house service and equipment preparation ✔ Experience across Europe ✔ Hundreds of satisfied customers 📞 Contact us today FT LOGISTICS – Quality we stand behind. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 4,724 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 2,400 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,600 mm, gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,450 mm, total length: 2,300 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜🔧 💼 Years of experience | In-house service & paint shop | Expert consultation | Pan-European transport | After-sales support Looking for a forklift you can rely on? 🤝 We are a reputable European dealer of new and used forklifts. From small businesses to international facilities – our machines ensure dependable and efficient logistics. ⚙️ 🌟 Why Choose FT Logistics ✅ Every forklift undergoes comprehensive technical servicing – inspection, testing, oil & filter changes, major component overhauls ✅ UDT certification available upon request ✅ In-house workshop & paint shop – forklifts reconditioned both visually and mechanically ✅ Own transport fleet across Europe 🚛 ✅ Operator training & on-site functional testing upon delivery ✅ After-sales technical support – we’re here for you even after the purchase ✅ Machine viewing & testing available at our headquarters ✅ Financing assistance via top leasing partners ✅ Invoice in EUR or PLN 💶 🔩 AVAILABLE MODEL: COMBILIFT C4000 – Four-way / Multidirectional Forklift / Multidrive System ✅ Year: 2002 ✅ Operating hours: 4,724 h ✅ Drive: GAS ⛽ ✅ Capacity: 4,000 kg ✅ Mast: Duplex – 4,500 mm ✅ Fork positioner: 1,380 mm | Forks: 1,200 mm Bjdpfxjz E Dzwe Ahmjwu ✅ Superelastic tyres – 100% ✅ Free lift: 2,400 mm ✅ Condition: Excellent – after major service ✅ Appearance: Clean, corrosion-free, ready for work 📏 Dimensions: Height: 2,450 mm | Length: 2,300 mm | Width: 2,250 mm | Positioner: 1,320 mm | Overall height: 3,600 mm 🚀 Ideal For: 🏭 Narrow aisle warehouses 🪵 Wood, steel & pipe sectors 📦 Handling long loads 🏗️ Indoor & outdoor operations FT Logistics – Quality you can count on. Service you can trust. 💙

Condition: used, functionality: fully functional, machine/vehicle number: 32059, mileage: 98,300 km, power: 235 kW (319.51 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6e, suspension: steel-air, loading space volume: 10.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, reinforced clutch, manual transmission Enfach-H, group switch, front axle with leaf springs, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full brake assist, emergency brake assist EBA, emergency brake signal, lane departure warning LDW, daytime running lights LED, heated fuel filter, trailer hitch Rockinger 400G150B (40 mm), steel bumper Bwjdpsz E Hg Njfx Ahmou Cab C (2240 mm wide, 1620 mm long), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, tinted windshield and door windows, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic air conditioning, multifunction steering wheel, safety automatics, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, Connectivity-Board module (RIO Box), sun visor on driver's door Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 10.5 m³ (sludge chamber approx. 10 m³ / water chamber approx. 0.5 m³), vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD hose reel made of stainless steel for 60 m HD hose DN 13, 40 m installed, spray gun, water chamber is welded into the front of the container with inspection opening, water chamber level indicator made of flexible, transparent hose, filling via a Storz "C" connection and free flow path, rear door hydraulically opens upwards over the entire cross-section with pipe breakage protection, hydraulic latch, sludge chamber level indicator with external scale with division every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge chute made of stainless steel, 2 pneumatically operated slide valves, container emptying: free discharge through the lower suction connection or by tilting backwards, 4-way valve pneumatically controlled from the operating station, over-suction protection, oil separator, operating station made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, transport hose reel for suction hoses with hydraulic drive mounted on the floor flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights on the right and left on the container, 1x LED rotating beacon at the rear, reversing camera

Condition: used, Technical details: Number of drawer: 2 taper: SK40 Bjdpfx Ahju Nkzpemowu weight: 362 kg dimensions L x W x H: 0,42 x 0,69 x 0,51 m Very well maintained tool trolley made of pipe construction, screwed with tools (comparable with the pictures) *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system * Bwjdpfsu Niuzsx Ahmsu

Condition: new, For sale, a pipe straightener from the German manufacturer SMS MEER, the machine is brand new, it was dismantled from a plant that collapsed during the delivery and assembly of the machine. The machine has two Siemens 200 kW drive motors each. Straightening rollers have a length of 460mm, diameter on the sides 400mm, diameter in the middle 300mm. The weight of the machine itself is 44 tons, the total weight is 55 tons. I can send a lot of photos before dismentling. Bedpsm H Unhofx Ahmjwu

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,688 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 1,560 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,560 mm, motor manufacturer: ELECTRIC, gearing type: automatic, fork carriage width: 1,500 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 21 X 9 -15, rear tire type: cushion tires (black), rear tire size: 355 X 50 - 15, overall weight: 11,600 kg, empty load weight: 7,600 kg, total height: 2,350 mm, total length: 1,900 mm, total width: 1,650 mm, color: green, Equipment: CE marking, all wheel drive, lighting, pallet forks, sideshift, # ⚡ COMBILIFT CBE4000 | ELECTRIC | ⬆️ TRIPLEX 5500 MM | ⚙️ FORK POSITIONER | ↔️ SIDE SHIFT | 🔝 FREE LIFT | ✅ READY TO WORK 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY Are you looking for an electric multidirectional forklift that is ready to work from day one? This COMBILIFT CBE4000 has undergone a full inspection, servicing, and testing process, ensuring it is immediately operational. ## ⭐ KEY ADVANTAGES ✅ Fully serviced before delivery 🛡️ Start-up warranty 🛞 Brand new 100% super elastic tires ⚡ Powerful 30 kW electric drive 🔋 72 V battery 💪 4000 kg lifting capacity ⬆️ Triplex mast with 1550 mm free lift ⚙️ Hydraulic fork positioner ↔️ Side shift 🚀 Ready for immediate operation 🎥 Live online demonstration available 🚛 Worldwide delivery ## 📋 TECHNICAL SPECIFICATIONS 🏭 Manufacturer: COMBILIFT 🚜 Model: CBE4000 📅 Year: 2021 ⚡ Power: Electric 🔋 Battery: 72 V ⚙️ Drive Motor: 30 kW ⏱️ Operating Hours: 4688 h 🏋️ Capacity: 4000 kg ⚖️ Weight: 7600 kg ⬆️ Mast: Triplex 📏 Lift Height: 5500 mm 🔝 Free Lift: 1550 mm ⚙️ Fork Positioner: 1500 mm 📐 Fork Size: 1200 × 150 × 50 mm Bwodpsz E Hzgefx Ahmsu ↔️ Side Shift: Yes 🏠 Operator Station: Open ## 📐 DIMENSIONS 📏 Height: 2350 mm 📏 Collapsed Mast: 2560 mm 📏 Length: 1890 mm 📏 Width: 1650 mm ## 🛞 TIRES 🔹 Front: 21 × 8 × 15 Super Elastic 🔹 Rear: 355 × 50 - 15 Super Elastic ✅ Condition: 100% New ## ⚙️ EQUIPMENT ⚙️ Hydraulic fork positioner ↔️ Side shift ⬆️ Triplex mast with free lift 🔋 72 V battery 💡 Working lights 🛞 Super elastic tires ## 🏗️ IDEAL FOR 🪵 Timber industry 🏭 Steel service centres 📦 Warehouses & logistics 🔩 Pipes, profiles & long loads 🏢 Indoor & outdoor operation ## 🤝 WHY FT LOGISTICS 🔧 Every machine is fully serviced, inspected and tested before delivery. 🌍 Over 100 forklifts in stock with worldwide delivery across Europe, Africa, Asia, the Middle East and South America. ## 🌍 WE PROVIDE 🔧 Pre-delivery service 🛡️ Warranty 👨‍🔧 Technical support 💳 Leasing & financing 🚛 Worldwide transport 📄 Export documentation 🤝 After-sales support 🎥 Live demonstrations, photos and videos available on request. # FT LOGISTICS ### 🚜 We Deliver Machines Ready To Work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,618 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,250 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 | 2018 | GAS | Duplex 4600 mm | Condition 5/5 Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for operation. No compromises. The COMBILIFT C4000 is a robust multi-directional forklift designed for handling long and heavy loads in demanding industrial environments 🏭. After a complete technical and visual overhaul, and fitted with brand new superelastic tyres, the machine is in premium condition and available for immediate use 🚀. 🔍 Key Specifications: Year: 2018 | Operating hours: 5,618 hrs Drive: GAS (LPG) Load capacity: 4,000 kg | Load centre: 600 mm Mast: Duplex with free lift Lifting height: 4,600 mm | Free lift: 2,250 mm Fork positioner: 1,360 mm | Forks: 1,200 mm Optional spreader beam: 4,050 mm 🔩 Bwodpfxsz E Hzye Ahmju Weight: 6,100 kg 📐 Dimensions: L/W/H: 2,300 / 2,300 / 2,400 mm Overall height: 3,000 mm 🛞 Tyres (NEW – 100%): Superelastic Front: 200/50-10 | Rear: 27x10-12 ⚙️ Equipment & Condition: Fully enclosed heated cabin ❄️🔥 Duplex mast with free lift – ideal for low-clearance warehouses Refurbished, rust-free ✨ Technical condition: 5/5 🔧 🏭 Suitable for: Narrow aisle warehouses Timber, steel, and pipe industries Indoor and outdoor operation

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,204 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 2,220 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,150 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 28 X 12,5 - 15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,400 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, COMBILIFT C5000XL | DUPLEX 4500 MM | FORK POSITIONER | FREE LIFT | FULLY HEATED CABIN | READY TO WORK 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🛞 BRAND NEW TIRES | 🚛 EUROPEAN & WORLDWIDE DELIVERY Are you looking for a reliable multidirectional forklift that is ready to work from day one without any additional servicing costs? We offer a professionally prepared COMBILIFT C5000XL, fully serviced, tested, and ready for immediate operation in timber yards, steel companies, production facilities, and logistics centers. ⭐ KEY ADVANTAGES ✓ Full service before sale ✓ Warranty included ✓ Brand new super elastic tires ✓ Very good technical and visual condition ✓ Ready to work without additional investment ✓ Live online video inspection available ✓ Direct delivery to your company 📋 TECHNICAL SPECIFICATION Manufacturer: COMBILIFT Model: C5000XL Year: 2015 Capacity: 5000 kg Engine: LPG Operating hours: 4024 h Mast: DUPLEX Lift height: 4500 mm Free lift: 2220 mm Fork positioner: 1360 mm Fork length: 1200 mm Cabin: Full and heated Operating weight: 7200 kg 📐 DIMENSIONS Height: 2600 mm Length: 2500 mm Width: 2400 mm Overall height: 3150 mm 🛞 TIRES Front: 23 X 10 - 12 SE Rear: 28 X 12.5 - 15 SE Condition: 100% BRAND NEW super elastic tires ⚙️ EQUIPMENT ✓ Fork positioner ✓ Fully heated cabin ✓ Free lift ✓ Working lights ✓ Warning beacon 🔧 PROFESSIONAL PREPARATION Each machine is professionally prepared by our technical department before delivery. ✓ Complete technical inspection ✓ Full service, including oils and filters ✓ Removal of identified leaks ✓ Operational and safety testing ✓ Load testing ✓ Final inspection before delivery Bwsdpfx Aez E H A Dohmou The forklift is in very good technical and visual condition and is ready for immediate operation. 🏭 IDEAL FOR ✓ Timber and wood industry ✓ Steel mills and steel stockholders ✓ Steel structure manufacturers ✓ Pipes, profiles, and long loads ✓ Indoor and outdoor operation 🛡️ WARRANTY The machine is supplied with a warranty. Our technical team also provides professional after-sales support. 🚛 TRANSPORT We organize professional transport throughout Europe and worldwide. We can deliver the forklift directly to your company and handle the complete transport and export process. 🌍 WHY FT LOGISTICS? FT LOGISTICS specializes in sideloaders, multidirectional forklifts, and specialist warehouse equipment. ✓ More than 100 machines available in stock ✓ Full service before delivery ✓ Warranty ✓ Professional technical advice ✓ Leasing and financing ✓ European and worldwide transport ✓ Export and customs documentation ✓ After-sales support 📹 LIVE VIDEO INSPECTION We can arrange a live WhatsApp video presentation so you can inspect the machine remotely before purchase. Additional photos, videos, and an individual transport quotation are available upon request. FT LOGISTICS READY TO WORK. READY FOR DELIVERY.

Condition: used, functionality: fully functional, Equipment: CE marking, type plate available, Used Colortronic material dosing system with control cabinet, 5x CSK 5 vacuum receivers, small mixer unit, 30 pieces of aluminium pipes – 6 m length, diameter 50 mm, bends made of stainless steel, mixing station. Bedpfx Ajy Smg Ijhmowu

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC - USV unit - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor - edge material height adjustment manually - PK25 snipping saws with 3 functions Bodpfxjz E S E Re Ahmjwu - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit - remote control for setup mode - the machine is for sell together with Homag TFU material handling system - liftable air cushion table for TFU at the infeed area - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change The machine is in good condition, regularly maintained and it is still in production. Available immediately. If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770