Used Placke Babypress Cnc for sale (8,782)

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Fjdpfjwwaruox Accegc Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, machine/vehicle number: 008397, X axis working area: 3650 mm Y axis working area: 1520 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Fgjdpox S Epbofx Accsc Total number of drilling spindles: 30 Total number of tool changer positions: 16

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck Fedpozb Ipzefx Accegc 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: used, Year of construction: 2012, Mazak Variaxis 500-5X II 5 Axis CNC Machining Centre with Mazatrol Matrix Control. S/No. 244505 (2012) 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 405mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Kouwa Spindle Chiller Unit, Cromar Swarf Management and Filtration System, OMF 1000 Oil Mist Filter Extraction, Renishaw RMI Tooleye, Machine Weight 7500kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Fgjdpfx Acezcpcljcec Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2015, Mazak Variaxis i-500 5 Axis CNC Machining Centre with Mazatol Matrix 2 Control. S/No. 259047 (2015), 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm, Max Workpiece Weight 300kg, CAT40 Spindle Taper, 40 Tool ATC, Mazak Spindle Chiller Unit, Vokes Air Scandmist 70D Oil Mist, Filter Extractor, Cromar Swarf Managment and Filtration System, Renishaw RMI - Q Tool Eye, Machine Weight 8000kg Please Note: Erowa Machining Fixture Not Included Lot 5 of Auction 3476. Visit cottandco website for more details. Fgodpfx Aszcn Imjccjc Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, maximum turning length 510mm, spindle speed 6,000rpm, milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, Fodpfx Aozcy S Rsccogc 2 X 12 station turrets, spindle power 11Kw, Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.

Condition: good (used), Year of construction: 2015, Maximum turning diameter 255mm, distance between collet chucks 639mm, swing over bed 270mm, spindle speed 4,000rpm, Fsdpfx Ajzcy Ilsccegc milling speed 6,000rpm, sub-spindle speed 5,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 52mm, 3 X 12 station turrets, spindle power 15Kw, Y axis + /- 40mm, swarf conveyor, coolant., Fanuc 31i.

Condition: good (used), Year of construction: 2006, 510mm swing, 320mm max. machining diameter, 525mm max turned length, 4000rpm spindle, 65mm bar capacity, 12 station turret, 15W spindle motor, FANUC Oi control, Fjdpfx Acszcwz Nocsgc collet chuck, Tool setter Tailstock, Parts Catcher, Swarf Conveyor, Coolant

Condition: good (used), General Information: Model: Gildemeister CTX 400 Series 2 Year: approx. 2000 Control: Heidenhain CNC Pilot Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Fedey Ixxbepfx Accjgc Max. turning length: ~600 mm Swing over bed: ~570 mm X-axis travel: ~220 mm Z-axis travel: ~635 mm Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Turret & Tooling: 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: The machine is showing an X-axis alarm Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. Fodpfx Acsx Ik Dcecogc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Amada Europe 245 CNC Turret Punch. S/No. 245013 (1999), with GE Fanuc Series 18i-P Control, Max Force 200KN, Max Stroke 1290mm, Light Guards, Qty of Assorted Power Tooling. Country of Origin: France Offers considered prior to auction Fgjdpfxjzcn E Eo Accsc This lot is part of Auction 3470U - Ending Wednesday 24th June 2026 at 3pm (UK Time)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kaltenbach KDS 615 / KBS 750 CNC Drilling / Sawing Line – Year 2010. 3 Spindles. Automatic Tool Changer. Hard Stamping. Gripper feed. 16 metres Infeed. 16 metres Outfeed. Infeed and Outfeed Cross Transfers. KALTENBACH KDS 615 3 axes CNC drilling machine KDS 615: Drilling spindle speed range 100 - 2500 rpm Drilling spindle drive power x 15 kW Total drill length. 160 - 460 mm Drill feed range 40 - 1000 mm/min Work piece width: 620 mm Workpiece height: 440 mm Drill diameter: 10 - 40 mm Number of drill axes: 3 Fgodjzcqmxspfx Accec KALTENBACH KBS750 Working range 90° 750 x 500 mm Working range 60° 650 x 500 mm Working range 45° 520 x 500 mm Working range 30° 390 x 500 mm Drive power5,5 kW

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 09.05.T rev 03, Mecal MC309 Nike. In working order Fgedpfx Acozcfrcscsc

Condition: used, Year of construction: 2009, Mazak Quick Turn Nexus 300 CNC Slant Bed Lathe With Mazatrol 640T Nexus Control Kitagawa B-212 Ø305mm 3 Jaw Power Chuck. Maximum Turning Ø419mm. Maximum Swing Ø650mm. Maximum Swing Over Cross Slide Ø419mm. Distance Between Centres 630mm. Bar Working Capacity Ø77mm. Spindle Bore 88mm. Axis Travel 'X'=225mm, 'Z'=680mm. Rapid Traverse 'X'=30m/min, 'Y'=30m/min. Maximum Spindle Speed 4,000rpm (30HP Motor).12 Position Turret. S/No. 180105 (2009). Fgjdpfx Acozbr Emjcsc With Coolant System, Chip Conveyor, Tailstock, Signal Tower & Tool Setting Arm. Weight 6,600kg.

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 530 mm, turning length: 2,500 mm, turning diameter: 900 mm, spindle bore: 280 mm, spindle speed (max.): 1,120 rpm, spindle speed (min.): 1 rpm, turning diameter over top slide: 530 mm, chuck outer diameter: 600 mm, Weiler CNC Hollow Spindle Lathe Model: E-90 Control: Siemens Year: 2008 Swing Over Bed: 900mm Fgjdpfx Aezbhc Ioccec Swing Over Top Slide: 530mm Distance Between Centres: 2500mm Spindle Bore: 280mm Spindle Speeds: 1-1120 RPM Machine With: 4 Way Auto Indexing Tool Post 600mm Front 3 Jaw Power Chuck 600mm Rear 4 Jaw Manual Chuck 2 Fixed Steadies Various Tooling

Condition: excellent (used), Year of construction: 2012, Operating range V808 Min. / max. height 10 – 500 mm1 Min. / max. width 60 – 1.250 mm Max. positioning weight 13.200 kg Min. material length 1.200 mm Max. cutting width at the bottom 800 mm (only plasma marking and cutting) Plasma cutting unit* Hypertherm HPR260XD Virtually dross-free cutting max. 32 mm Marking lines Yes, marking and cutting with the same consumables Plasma gas mild steel O2 (99,9% pure clean, dry, oil-free) Shield gas mild steel O2/air (99,9% pure clean, dry, oil-free) Cutting speed 12 mm Approx. 3850 mm/min., 260A Cutting speed 20 mm Approx. 2170 mm/min., 260A Cutting speed 32 mm Approx. 1135 mm/min.; 260 A Fgjdpfx Aszcfpzoccec Fuse Additional 75 A slow is required Plasma Gas O2 (99,9% pure clean, dry, oil-free) Consumption 80l/min System pressure 10 bar * grounding, max. 6m of machine: AC power, PE, and service grounds must be connected to all equipment according to local and national codes. Oxy-Fuel cutting unit Gas supply Magnetic valve with back-fire protection Ignition Automatically Gas Acetylene Consumption 20l/ min System pressure 2 bar Cutting Gas O2 Consumption 450l/ min System pressure 10 bar Operational direction From right to left Profiles 1 Flat steel Angles European standard channels (UNP) European I-beams (IPE) European standard beams (IPN) European wide flange beams (HE) British universal beams (UB) British universal columns (UC) Square tubes 1 Small profiles have to be sufficient straight. General Voltage Stabilizer Not included Ambient temperature 0 - 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, MACHINING CAPABILITIES: - Height (thickness) of useful Z-axis travel: 225 mm - Length of useful X-axis milling travel: 3860 mm - Width of useful Y-axis milling travel: 1930 mm - Work area: X = 3090 mm Y = 1530 mm Z = 85 mm, depending on the clamping system, see machine technical diagrams. - Maximum travel speeds: X-axis: 25 m/min Y-axis: 25 m/min Z-axis: 15 m/min MACHINE COMPOSITION: - Vacuum table with grooved length x width: mm Grid pattern with 30 x 30 mm grid spacing Matrix table with fine grid, axis dimensions 30x30 mm (instead of 60x60 mm grid) - 2 Vacuum pumps 250 m3/h - Chip evacuation mat - X-axis movement via pinion and rack, Y & Z-axis movements via screw and sleeves (high-quality precision linear guides with automatic lubrication) • Milling/routing unit 10 kW - Tool holder connection type: HSK F63 - Variable speed 1000–24,000 RPM, controlled by a frequency converter Rotation direction: right/left The routing spindle is connected to the Z-axis mounting plate via linear guides and moves along 2 vertical linear guides. The tool clamping is done using an HSK F63 cone. Tool retention is controlled by 3 sensors. This ensures safe operation. The tool clamping cleaning is pneumatic. Drive: HF 3-phase motor controlled by a frequency converter Bearing: ceramic Spindle cooling: by air - Extraction hood around the perimeter - On-board tool magazine, 11 positions - Maximum tool diameter: 100 mm - Maximum tool height: 153 mm - Distance between clamping jaws: 110 mm Please consult the machine configuration for more information on specifications. • DH 16 4H 2S Drilling unit: Unit with 12 vertical heads and 4 horizontal heads; 2 slotting saws; 1 in the X direction and 1 in the Y direction Vertical drilling system with 12 spindles. 7 spindles in the X direction and 5 spindles in the Y direction. Independent operation of each spindle is possible. Continuous speed up to 6000 RPM, horizontal drilling system with 4 spindles. 1 double spindle in the X direction, 1 double spindle in the Y direction. • Control panel: Fgodpfx Aozcvvrsccjc - Windows PC - Programs (Software): F4 Design, F4 Nest OTHER FEATURES: - Total electrical supply: 400V. 3Ph.+N+T 50Hz IN 56-63 A - Installed power: 26kW - Pneumatic supply: 8 Bars - Average consumption: 350 Nl/min - Centralized extraction ports - CE standard marking Lockable disconnector switch, emergency stops

Condition: used, Brand : CMZ Model : TBI 520 MC Cnc : FANUC 18i-TB with Manual guide Yom : 2005 Times operation: 1371h Distance between centres: 1.100 mm Swing over bed: 520 mm Ø Max. Turning: 420 mm X Travel X : 296 mm Z Travel : 1090 mm Rapid Feeds (X, Z Axis): 18 m/min Rapid Feeds (Z Axis): 24 m/min Max Speed of the Head: 3000 rpm Spindle Bar Diameter: 82 mm Chuck Bore Ø: 95 mm Spindle Max. Power : 22 kw Number turret positions; 12 (VDI-50) Fedpfxezczaco Accjgc Number positions of Driven tools 12 Driven Tools Speed 4000 rpm Max Power Driven Tools 8,5 kw C Axis and Driven Tools INCLUDED Hydraulic Steady Rest installation: INCLUDED Tool Presetter INCLUDED 2 Axial Driven Tool Holders INCLUDED 2 Radial Driven Tool Holders INCLUDED Installed Power 50 KVA Equipped with chip conveyor

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. Fodpfx Acogypclecsgc - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control Fgedpozakk Eofx Accsc 3 jaw 10 inch Pratt and Barnet manual chuck 10HP spindle Quick change tool post Tailstock Coolant tank and tray 6 tool holders

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres 10 station turret Fgjdozakgtepfx Accsc Tailstock Coolant pump and tank Swarf conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control 3 jaw SMW chuck 720mm swing 2000mm between centres 8 station turret Fedpfx Acjzaix Iscegc Coolant pump and tank Swarf conveyor

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Fodpszcplysfx Accjgc Additional options & accessories: - Preparation for a bar feeder. - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. - Approx. 9 VDI-30 tool holders (7 static, 2 powered).

Year of construction: 2021, condition: used, Vulcan VMC1000B CNC Vertical Machining Centre. Serial No. 106B0542101 (2021) with Heidenhain TNC620 Control, Table Size 1100 x 500mm, Travels X/Y/Z = 1000/600/650mm, Max Table Load 600kg, 30 Tool ATC (Drum Type), Spindle Taper BT40, Spindle Speed Max 8000rpm, Swarf Conveyor, Filtermist FX5002 Oil Mist Extractor, Machine Weight 6800kg. Auction 3484. Fgjdpfx Aozbaxbjccoc Please note: This lot has been professionally decommissioned Location: This lot is located in Burton-on-Trent. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), CMZ brand CNC lathe, TX66 Y2 Quattro model, year 2012, with powered tooling on both turrets, Y-axis... Fgjdjzcu Hiepfx Accec