Used Plasma Plastemp Primus 160 for sale (6,138)

Condition: used, Year of construction: 2011, CNC portal plasma cutting machine Manufacturer: Eckert Model: Jantar 2 Year of manufacture: 2011 CNC control Working area: 2x4 m Hjdpfxsy Nqcbj Ab Njnl 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table 12526ä

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 Hedpey E N Hdofx Ab Nsnl 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) Hnsdpfx Ajy E Nyksb Nsl ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right Hnjdpfx Aoy E Nxgob Nel General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel Hjdpfoy Nd Hyox Ab Nonl • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: good (used), Year of construction: 2016, Ref. no.: 18657 Hersteller: ENGEL Type: e-victory 440/160 CC300 ecodrive Year of construction: 2016 Clamping unit Clamping force: 160 ton Opening stroke: 900 mm Mould height min.: 300 mm Mould height max.: 600 mm Platen size (h x v): 750 X 750 mm Hsdpfjy Ipgpjx Ab Nenl Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 151 g Injection pressure: 2400 bar Measurements and weight Dimensions: 5,7 X 1,8 X 2,2 m Machine weight: 10200 kg Further information: Tie-bar-less + electric injection = maximum flexibility and precision ENGEL e-victory 440/160: 👉 This is a hybrid machine (servo-hydraulic + electric) ⸻ 🔍 How it works ✔ Electric part: * Injection unit (screw movement) * Ensures very high precision and process stability ✔ Hydraulic part: * Clamping unit (mould closing) * Maintains clamping force efficiently without continuous energy consumption 👉 This system combines: * The precision of an all-electric machine * With the power and efficiency of a hydraulic system This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design. The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing. Key features: * Tie-bar-less design for maximum mould flexibility * Servo-hydraulic drive for high energy efficiency * Precise and stable processing performance * Compact footprint with a large mould installation area * Modern ENGEL control system The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures. Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.

Condition: ready for operation (used), Dimensions: Width: 180 mm Depth: 460 mm Hjdsxfk Dzopfx Ab Nsnl Height: 280 mm Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: ready for operation (used), PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Manufacturer: DYTRON Model: ST 160 Overall dimensions: Length: 1000 mm Width: 530 mm Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. The standard set also includes a special workbench and a metal case with accessories. Hedsxnqt Uspfx Ab Nonl ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg

Year of construction: 2026, condition: new, Wravor 20-160 – robust and reliable industrial circular - edger and multirip saw in one machine, designed for professional primary board processing. The machine is suitable for accurate and high-capacity edging and ripping of boards and cants in demanding industrial production. Technical data: Hnodjy Rku Hepfx Ab Nol - main motor: 30 / 37 / 45 / 55 / 75 kW - cutting thickness: 20 – 160 mm - max cutting width: 900 / 1000 / 1250 mm - number of movable blades: 1-4 (hydraulic or servo drive system for precise and flexible cutting adjustment) - computer setting of cutting width - heavy-duty and stable construction, - high cutting precision, - excellent productivity, - reliable operation for continuous industrial use, - different options for mechanisation (mechanic or automatic conveyors) The machine can operate independently or as part of a complete sawmill line with automatic transport systems.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Commissioned: 2025 Condition: Demo machine — less than 200 production hours, essentially as-new Type: CNC plasma pipe profiling machine (6-axis) Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a state-of-the-art 6-axis CNC pipe cutting machine capable of processing round pipes with diameters up to 914 mm and lengths up to 12,000 mm, with wall thicknesses between 3 and 50 mm. Installed in 2025 in Belgium, this machine has less than 200 running hours, making it virtually new but available at a pre-owned price point. The 6th CNC axis ensures a constant torch-to-material distance for perfect weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head offers torch adjustment of ±60° and 380° rotation, allowing highly accurate contour cutting for any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-bevel weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor system on rails — Dual-point fume extraction (at cutting head and through the chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — Electrical cabinet with CNC unit, PLC, IP54 protection, and power buffer — Industrial PC with 22” touchscreen and mobile control panel — All safety devices (CE certified to 2006/42/CE and 2004/108/CE standards) — Complete technical documentation, operator manuals, and installation drawings Key specifications: — Clamping diameter range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel angle: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation dimensions: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Important: COROBS machine control software licenses are not included and must be obtained separately from Voortman. Voortman offers professional reinstallation, commissioning, operator training, and maintenance contracts at the buyer's site. Hnodpfx Absy H I Trs Nsl Why choose this machine? A new MO Compact 900 currently costs over EUR 350,000 and comes with a 6–12 month delivery time. This unit delivers identical capabilities, is immediately available, and represents significant savings. Full OEM support from Voortman is available to the buyer. Location: Belgium (inspection by appointment) Delivery: Ex-works. Dismantling and transport subject to agreement. For questions or further information, please send us a message or call.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 5 Wittmann temperature control units are available for sale; the price is for 1 unit. Medium: Water Operating temperature: max. 90°C Heating capacity: 9 kW Hnodpfx Aoy In Dysb Nel Cooling capacity: 25 kW

Condition: used, Pallet offer 150 used plastic stacking crates - 400x300 mm, 15 Liter, perforated. Hjdpfx Aey Hptgob Nsnl This plastic stacking crate with Euronorm dimensions of 400x300 mm and a capacity of 15 liters is a practical and reliable solution for storing and transporting a variety of products. The crate is made of lightweight but sturdy polypropylene, making

Condition: used, functionality: fully functional, machine/vehicle number: 2488108, Year of construction: 2019, load capacity: 1,600 kg, lifting height: 4,150 mm, free lift: 1,666 mm, load center: 600 mm, fuel type: electric, power: 1.8 kW (2.45 HP), battery capacity: 300 Ah, battery voltage: 24 V, battery weight: 270 kg, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 70 mm, ground clearance: 19 mm, turning radius (outer): 1,493 mm, front tire size: 230, rear tire size: 85, overall weight: 1,439 kg, total height: 1,946 mm, total length: 2,045 mm, total width: 790 mm, color: red, Equipment: pallet forks, Technical specifications Hnedpfsyqzk Dex Ab Nel - Year of manufacture: 2019 - Drive: Battery - Operation: Walk-behind - Load capacity: 1,600 kg - Support arm lift: 2,000 kg - Lift height: 4.15 m - Height with mast extended: 5.06 m - Load centre: 600 mm - Weight: 1,439 kg - Fork dimensions (L x W x T): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 2.05 m x 0.79 m x 1.95 m - Max. travel speed: 0.6 – 6.0 km/h - Max. lifting speed with/without load: 0.17 m/s / 0.33 m/s - Max. gradeability with/without load: 7% / 12% Fully functional, typical signs of use.

Condition: used, functionality: fully functional, machine/vehicle number: 2488118, Year of construction: 2019, load capacity: 1,600 kg, lifting height: 4,150 mm, free lift: 1,666 mm, load center: 600 mm, fuel type: electric, construction height: 5,056 mm, power: 1.8 kW (2.45 HP), battery capacity: 300 Ah, battery voltage: 24 V, battery weight: 270 kg, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 70 mm, ground clearance: 19 mm, turning radius (outer): 1,493 mm, front tire size: 230, rear tire size: 85, overall weight: 1,439 kg, total height: 1,946 mm, total length: 2,045 mm, total width: 790 mm, color: red, Equipment: pallet forks, Technical specifications - Year of manufacture: 2019 - Drive: Battery - Operation: Walk-behind - Load capacity: 1,600 kg Hnedpfx Absyqzkwo Nel - Support arm lift: 2,000 kg - Lift height: 4.15 m - Height with mast extended: 5.06 m - Load centre: 600 mm - Weight: 1,439 kg - Fork dimensions (L x W x T): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 2.05 m x 0.79 m x 1.95 m - Max. travel speed: 0.6 – 6.0 km/h - Max. lifting speed with/without load: 0.17 m/s / 0.33 m/s - Max. gradeability with/without load: 7% / 12% Fully functional, typical signs of use.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 810 h, load capacity: 1,600 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low-lift pallet truck Load centre: 600 Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: Polyurethane Rear tyre type: Polyurethane Hodpoy N Hbgsfx Ab Nenl Battery voltage: 24V Battery type: Lithium-ion Battery year of manufacture: 2023 Description:

Condition: reconditioned (used), Product Information "Voest Alpine DA 160" Lead and feed screw lathe Voest Model DA 160 Condition: Refurbished Technical Specifications Centre height: 165 mm Distance between centres: 650 mm Swing over bed: 330 mm Swing over cross slide: 190 mm Bed width: 210 mm Lead screw diameter: 25 mm Chuck diameter: 160 mm Tailstock taper: MT 3 Spindle speeds (16): 30 - 2,500 rpm Motor power: 2 / 2.4 kW Quill travel: 100 mm Dimensions (LxWxH): 1,500 mm x 900 mm x 1,650 mm Equipment: Hnsdpfx Ajy Ndqrsb Nel - 3-axis digital readout, brand Sino – NEW - 3-jaw lathe chuck - Emergency-stop push button - Multifix quick-change toolholder system, 6 holders - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with Morse taper arbor - Live centre - Lead and feedscrew cover NEW - Chuck guard, secured with limit switch - Operating tools - Operating manual - Machine feet

Condition: used, Year of construction: 1996, functionality: fully functional, Graule ZS 170 saw, year 1996, 2,000 EUR Graule 6/250 - 160 spindle moulder, year 2008 2,700 EUR Hnjdpowp Stzefx Ab Nsl Rotary rack for sashes and frames 500 EUR Roller conveyor 7.5 m as buffer for windows before glazing station 600 EUR

Condition: good (used), Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Hnedsy Nkuwepfx Ab Njl Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500

Condition: used, mileage: 118,940 km, power: 115 kW (156.36 HP), first registration: 12/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,500 mm, loading space width: 1,800 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, soot filter, Used Vehicle * Vehicle number: - 71 * Euro 6 green environmental badge Hnedpoy Ii Ugsfx Ab Njl * Daily panel van Maxi long * Extra high roof H3 (2.1 m) * Load area dimensions approx. 4.5 m x 1.8 m x 2.1 m * Automatic climate control * 8-speed Hi-Matic automatic transmission * Rear parking sensors * Reversing camera * Driver's comfort suspension seat * Cruise control * Multifunction steering wheel * GVW 3,500 kg * 3 seats * Partition wall * Cargo area lining (floor & walls) * Electric windows * Central locking * Airbag * ABS * ASR (traction control) * German vehicle, 1st owner * Original mileage ---- -> Please note that viewing is only possible by prior appointment. Thank you for your understanding. -> Sale only to businesses or for export. The above data, photos and equipment list are provided solely for general identification of the vehicle and do not constitute a guaranteed characteristic in the legal sense of a sale. All information and listed equipment are provided WITHOUT WARRANTY. Subject to changes, prior sale and errors! The equipment list is not part of the contract and must be checked in detail by each prospective buyer at the vehicle prior to purchase. Subsequent complaints will not be accepted.

Condition: used, mileage: 150,000 km, power: 115 kW (156.36 HP), first registration: 02/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,500 mm, loading space width: 1,800 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, soot filter, Used Vehicle * Vehicle No.: - 64 Hnsdpfjynva Ujx Ab Nel * Euro 6 green emissions sticker * Daily Maxi Panel Van Long * Extra high roof H3 (2.1m) * Loading dimensions approx. 4.5m x 1.8m x 2.1m * Automatic climate control * 8-speed automatic Hi-Matic gearbox * Rear parking sensors * Reversing camera * Driver’s comfort suspension seat * Cruise control * Multifunction steering wheel * GVWR 3500 kg * 3 seats * Partition wall * Cargo compartment lining (floor + walls) * Electric windows * Central locking * Airbag * ABS * ASR * German vehicle, 1st owner * Original mileage ---- -> Please note that viewing is only possible by prior appointment. Thank you for your understanding. -> Sale only to traders or for export. The above data, photos and equipment list serve solely for the general identification of the vehicle and do not constitute guaranteed characteristics in the legal sense under purchase law. All information / accessory details are WITHOUT WARRANTY. Subject to change, prior sale and errors excepted! The equipment list is not part of the contract and must be checked on site in detail by each interested party before concluding the purchase. Later complaints will not be accepted.

Condition: good (used), mileage: 293,578 km, first registration: 11/2009, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,550 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, total length: 7,600 mm, total width: 2,550 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 8,400 kg, Year of construction: 2009, Equipment: crane, = Further Options and Accessories = - PTO = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 4,462 cc Max. front axle load: 4,400 kg Max. rear axle load: 8,400 kg Weights Unladen weight: 3,300 kg Payload: 8,690 kg Gross vehicle weight: 11,990 kg Functional Crane: HMF 850-K2, mounted behind the cab Body manufacturer: DAF Hnjdpfxexv R Etj Ab Nol Condition Technical condition: good Visual condition: good Identification Registration number: 21-BTT-1 = Company Information = You can find our complete range here:

Condition: used, Year of construction: 2022, Bystronic XACT Smart 160/3100 Hydraulic Press Brake. S/No. XACT 22040SE (02/2022), Max Press Force 1600KN, Max Working Length 3100mm, Max Stroke 200mm, Rapid Approach, 140mm/s, Working Speed 1 - 10mm/s, Return Speed 115mm/s, Machine Weight 10,500kg Hodpfx Aboy D N R Hs Njnl Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, mileage: 130,000 km, power: 115 kW (156.36 HP), first registration: 04/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,000 mm, loading space length: 3,500 mm, Equipment: ABS, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Attention! Sale preferably to business clients. Internal ID Number: [2840] ----Optional add-ons available: * 12–64 months warranty (valid EU-wide) * New inspection * New MOT & emissions test * Nationwide delivery * Financing possible with or without down payment * Tow bar / rear view camera can be retrofitted on request * Spring offer: On request and for an extra charge of only €999, towing capacity can be increased up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * High roof + long wheelbase * Rear view camera * Air conditioning * 3,500 kg tow bar * Bluetooth multimedia system * 3 seats Special features: Storage compartment on dashboard with USB port, audio system: radio with CD player (MP3 compatible), USB and Bluetooth hands-free kit, parking assistance with sensors. Other features: Driver’s airbag, trailer socket pre-installation, traction control (ASR), blue comfort dashboard, S-series version, side exhaust (left), electrically adjustable and heated exterior mirrors, brake assist, cargo area ceiling light, electronic brakeforce distribution, rear axle: parabolic springs, front axle: transverse leaf spring, rear doors, tinted windshield and side windows, alternator 180 A, speed limiter 160 km/h, urea (AdBlue) tank: 20 L, body/construction: high roof van, overhang, instrument cluster with pixel matrix display, fuel tank: 70 L, blue radiator grille, bulkhead, headlight range adjustment, engine 2.3L – 115 kW Diesel SCR, wheelbase 3,520 mm, tire repair kit, low-emission according to Euro 6 standard, blue headlight surrounds, sliding door (right, load/passenger area), driver’s cabin: single passenger seat, 3-way adjustable, start/stop system, overhang control, maintenance indicator, gross vehicle weight 3.50 t. ----Interested in leasing or financing? We offer attractive options – also possible without a down payment! Feel free to contact us. Contact: Phone: E-Mail: Location: Nutzfahrzeuge West GmbH Hnedpfsy Hzwkox Ab Nel Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Note: All information provided online is non-binding and intended solely for general vehicle description. Errors, typographical mistakes, and prior sale excepted. The only binding specification of the vehicle is contained in the sales contract at our premises or in written confirmation. Vehicles with mileage over 50,000 km or older than 3 years are preferably sold to commercial customers.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 5 h, load capacity: 16,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,130 mm, power: 168 kW (228.42 HP), motor manufacturer: Cummins, fork length: 2,400 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 12.00-20 / 20PR, rear tire type: pneumatic tires (air-filled), rear tire size: 12.00-20 / 20PR, overall weight: 22,400 kg, color: red, Equipment: CE marking, air conditioning, cabin, front guard, lighting, pallet forks, sideshift, 🔧 Key Specifications: • Year: 2025 • Operating hours: 5 h • Fuel type: Diesel • Capacity: 16,000 kg • Lowered mast height: 3,130 mm • Max lift height: 4.50 m • Power: 168 kW (228 hp) Hsdpsy Hpmaofx Ab Njnl • Fork positioner: Yes • Mast type: Triplex • Fork length: 2,400 mm • Side shift: Yes • Cab type: Full cabin (Closed) with Airco • Oil cooler: Yes • CE certification: Yes ✨ Highlights: ✅ Carefully selected from trusted sources with verifiable history ✅ CE certification and full documentation included ✅ Equipped with Side-shift & Fork positioners ✅ Airco for operator comfort ✅ Oil cooler for optimal performance ✅ Ready for immediate transport and operation ✅ Comprehensive technical documentation available ⚙️ Condition: Clean, fully operational machine in excellent condition. Immediate availability from our Sittard stock. 🌍 Location & Delivery: 📍 Located in Sittard, the Netherlands 🚚 Worldwide delivery possible 💰 Competitive EXW pricing (excluding VAT) Reliable first-owner machines with complete service history and expert technical support. Benefit from one of the largest European stocks of new and used equipment. All machines are CE certified, and ready for immediate use. Spare parts and professional assistance available upon request. 🚚 Delivery: • Crane loading available on request for hassle-free handling at departure • Flexible dispatch options tailored to your destination and logistics preferences • All shipping handled professionally by Colle Rental & Sales logistics team

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 16,000 kg, lifting height: 4,000 mm, load center: 1,200 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 168 kW (228.42 HP), motor manufacturer: Cummins, gearing type: converter, fork carriage width: 2,500 mm, fork length: 2,400 mm, fork width: 250 mm, fork thickness: 100 mm, ground clearance: 350 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 12.00-20 / 20PR, rear tire type: pneumatic tires (air-filled), rear tire size: 12.00-20 / 20PR, overall weight: 23,700 kg, color: red, Equipment: CE marking, air conditioning, front guard, head guard, lighting, pallet forks, sideshift, 🔧 Key Specifications: • Year: 2025 • Operating hours: 0 h • Fuel type: Diesel • Capacity: 16,000 kg • Load center distance: 1200 mm • Lowered mast height: 3,695 mm • Max lift height: 4,000 mm • Engine: Cummins 6-cylinder – 168 kW (225 hp) • Mast type: Duplex • Fork length: 2,400 mm • Side shift: Yes • Fork positioner: Yes • Cab: Full cabin (EGO) with air conditioning Hnodpfxey Hpk Se Ab Nol • CE certification: Yes ✨ Highlights: ✅ Brand new, unused machine ✅ Cummins 6-cylinder engine (168 kW) – powerful & reliable ✅ Full cabin with air conditioning for maximum operator comfort ✅ Equipped with side-shift & fork positioners for precise handling ✅ Air tyres 12.00-20 / 20PR (6 pcs) for heavy-duty applications ✅ Oil cooler for optimal performance under load ✅ LED rotating beacon & back-up alarm for enhanced safety ✅ Working lights front & rear for low-light conditions ✅ CE certified with full documentation ✅ Ready for immediate deployment ⚙️ Condition: Brand new, unused forklift in perfect condition. Available directly from our stock in Sittard. 🌍 Location & Delivery: 📍 Sittard, the Netherlands 🚚 Worldwide delivery available 💰 Competitive EXW pricing (excl. VAT) 📝 Description: The Kalmar DCG160-12 is a heavy-duty diesel forklift designed for demanding industrial and port operations. With a lifting capacity of 16,000 kg and a maximum lifting height of 4.0 metres, this machine delivers outstanding performance in intensive applications. Powered by a robust Cummins 6-cylinder Stage V engine (168 kW), the forklift ensures reliable and efficient operation. The hydrodynamic Powershift transmission guarantees smooth handling, while the fully enclosed EGO cabin with air conditioning provides excellent operator comfort. This unit is equipped with air tyres (12.00-20 / 20PR), oil cooler, LED rotating beacon, back-up alarm, and working lights at both front and rear. The inclusion of side-shift and fork positioners allows precise load control, making it ideal for heavy-duty material handling tasks. 🚚 Delivery: • Crane loading available on request • Flexible shipping options worldwide • Professionally handled by Colle Rental & Sales logistics team