Used Plasma Plastemp Primus 160 for sale (6,318)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm Isdpfx Anszizkyoyotk ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, functionality: fully functional, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Main drive Number of heads: 2 (each with 3 axes) Table External length: 3210 mm External width: 5410 mm Height adjustment: 2150 mm Isdpfsvpuvgex Anyetk Equipped with robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour and a 1000L tank. Machine has 9710 production hours (utilization: 12%). The machine has been regularly and properly serviced, with invoices for spare parts available. The reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller—twice a year. Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.

Condition: good (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, injection weight: 289 g, Year of manufacture: 2005 Operating hours: 80,228 h Ijdpfx Anezkqf Aeyjtk Clamping force: 160 tons Distance between tie bars: 520 x 520 mm Screw diameter: 45 mm Injection volume: 318 ccm Injection weight: 289 g for PS Equipment: Krauss Maffei robot, core pull, Euromap, 3 additional injection units

Condition: excellent (used), Primus Engineering Type: DST 350 This testing equipment was designed for performing IP protection class tests for "dust" according to, for example, DIN 40050 Part 9 and DIN EN 60529. The testing equipment is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Itsdpfezgbtiex Anyok Predefined test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 kW Connection voltage: 400V/50Hz 3-N/PE (16A CEE socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2020, Hydraulic 3-jaw chuck, manufacturer: SCHUNK, type: TFH 500-160, year of manufacture: approx. 2020, in good condition. Includes 2 chuck keys and 3 pairs of jaws. Diameter: 500 mm, height: 150 mm. Ijdpezty Rgjfx Anystk Bore in the front area of the chuck: diameter 160 x 65 mm, depth. Short taper DIN A 8 in the flange, thread in the chuck for tensioning rod (approx. M 100 x 2). Weight approx. 180 kg without jaws. The chuck is in good condition. The chuck was previously installed in a MORI SEIKI SL 6 or SL 603.

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Original new price: 450,000 euros. Itjdpfozdz U Ujx Anyjk

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Parallel Lathe WEILER type PRAKTIKANT 160 B Between points: 650 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 192 mm Centre height: 160 mm Spindle diameter: Ø 40 mm Itsdpszqn Twefx Anysk Rotation: from 48 to 2500 RPM Turret Multifix type A 3-jaws chuck Ø 135 mm Year of construction: 1999 2 speeds spindle motor - 3kW Threadings Metric + Whitworth Tailstock CM3 Scale 2 axes MITUTOYO Supplied with (see photos) : 1 clamps system 1 4-jaws chuck Ø 135 mm 7 MULTIFIX tool holders + various tools ariousSet of clamps Voltage: 380 V Length: 1800 mm Width: 1100 mm Total height (with light): 2100 mm Weight: approx 900 KG

Condition: used, mileage: 415,000 km, power: 115 kW (156.36 HP), first registration: 04/2018, fuel type: diesel, overall weight: 3,500 kg, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: air conditioning, Iveco 35s16 First registered: 04.2018 Mileage: 415,081 km Operating hours: 415,081 Carrier refrigeration unit Itjdpfx Anszvk Syoyok Automatic climate control 3 seats !!! The cooler is running, but it is not cooling!!! ---- Please visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Overnight accommodation - Transfer to Munich Airport or Passau train station

Condition: used, Year of construction: 1988, Immediately available from the racing department: Hydraulic four-column press, Hymag Type HS 4 – 160 k Year of manufacture 1988 Rebuilt to meet the latest occupational safety standards in 2020 Pressing force 160 tons Table size 1500 x 850 mm Itedpfxszuwgne Anyek Stroke 500 mm Drive power 11 kW Weight 7 tons

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 6,400 h, For sale the CNC WATER JET INTERMAC Itodpfx Aoyzkh Uenyek Type: PRIMUS 184 Year: 2017 Very good working condition ! Working area: 2000 × 4000 mm , max. thickness 250 mm. Pressure booster BFT ECOTRON 40. 37 ,the sand filter and the safety light barriers included.The water jet cutting machine is ideal solution for kitchen countertops, as well as for cutting a wide variety of materials, natural and sintered stone, and ceramic materials. High-efficiency & Energy-saving waterjet cutting equipment. It features fast cutting speed and significantly improved processing efficiency.

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Praktikant 160 AC lathe, manufactured in 1996, with a 3-axis Heidenhain digital display, three-jaw chuck, Multifix system, rear splash guard, electric chuck guard, collet chuck system with a set of collets, and change gears. The machine is in good, operational condition and can be demonstrated under power by arrangement. Isdpfezpfw Dsx Anystk

Condition: good (used), Year of construction: 2018, Flame-Cutting Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Itjdpfovzrczsx Anyek Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool changer Tool holder capacity: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point cross conveyor Number of carriages: 2 clamps NC feed carriage, positioned on the side 4 clamping jaws (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowerable discharge table with chute into material collection container for discharging small components. Filter unit incl. piping Powerful for the use of carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and V-scoring LANTEK license 11826ä Availability: immediate!

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1200603/R, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 3 mm, overall weight: 4,000 kg, input voltage: 380 V, total width: 3,000 mm, total height: 2,250 mm, total length: 7,600 mm, cutting height (max.): 20 mm, table height: 790 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 100 A, working length: 6,000 mm, input current: 31 A, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 200 mm, type of cooling: water, height adjustment type: mechanical, input frequency: 250 Hz, water tank capacity: 25 l, power: 3 kW (4.08 HP), Equipment: documentation/manual, HD Plasma Cutting System – Farina – 2000x6000 mm – Excellent Condition For sale: High-definition (HD) plasma cutting system by Farina, year 2003, in excellent working condition. This machine is a robust and reliable solution, ideal for heavy-duty fabrication and precision work on large formats. Technical specifications: - Brand: Farina - Year of manufacture: 2003 - Worktable dimensions: 2,000 x 6,000 mm - Generator: Hypertherm HD3070 (High Definition), synonymous with quality and precision in plasma cutting. - Included equipment: Dedicated dust extraction system and filters (MA-FER). Iodpfx Anjzkhmdeyotk - Software: Controlled via InfoLab software. - New torch: Original PAC186 torch, upgraded to HyPerformance HD3070 Key features: - Worktable dimensions ideal for handling large sheet metal. - Hypertherm HD3070 technology guarantees superior cutting quality compared to standard systems. - Complete system with dust extraction, ready for use. - Robust machine, perfect for those seeking an excellent balance between investment and productivity.

Condition: used, Plasma cutting machine CLOOS, type CPS 40/80 Year of manufacture: 1990 Output at 60% duty cycle: 80 Amps Output at 100% duty cycle: 40 Amps Adjustable range: 40 and 80 Amps (2 stages) Cutting capacity in steel: max. 25 mm Torch cable length: 5.5 meters Power supply: 400 Volts with 32 Amp plug - CLOOS hand torch Itjdpfxedzqccs Anysk Dimensions (L x W x H): 700 x 600 x 750 mm Weight: 160 kg Good condition

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL260-091, type of input current: three-phase, input voltage: 380 V, total width: 4,500 mm, total length: 7,500 mm, total height: 1,500 mm, type of cooling: water, overall weight: 9,100 kg, cutting current: 260 A, sheet thickness steel (max.): 38 mm, open-circuit voltage: 380 V, working range: 60 mm, table length: 6,000 mm, table width: 3,000 mm, working width: 3,000 mm, For sale: AKYAPAK HPR 260 industrial CNC machine for thermal cutting of sheet material, manufactured in 2013. The machine is of the gantry type, with a working area of 3000 × 6000 mm, suitable for cutting large-format steel sheets. It is equipped with a Hypertherm HPR260 / HPR260XD plasma system, Hypertherm MicroEDGE Pro / Edge Pro CNC control interface, as well as equipment for oxy-fuel cutting. The machine is suitable for the production of metal structures, plates, flanges, blanks, sheet steel parts, and for heavy industrial applications. Key technical specifications: Parameter Data Manufacturer AKYAPAK Model HPR 260 Machine type CNC plasma and oxy-fuel cutting machine Year of manufacture 2013 Machine serial number PL260-091 Working area 3000 × 6000 mm CNC control Hypertherm MicroEDGE Pro / Edge Pro Operating system Windows XP Plasma source Hypertherm HPR260 / HPR260XD Plasma serial number 260XD-004364 Plasma output current 260 A Duty cycle 100% Machine nameplate power 60 kW Power supply 380 V / 50 Hz Isdpfozibqaex Anystk Weight 9010 kg Origin Turkey CE marking Yes Equipment and features The machine includes: CNC gantry structure; working table 3000 × 6000 mm; Hypertherm HPR260 / HPR260XD plasma system; Hypertherm MicroEDGE Pro / Edge Pro CNC control; Hypertherm gas console; gas regulators; plasma cutting torch; oxy-fuel cutting head; torch height control; slotted table with slats; fume extraction / aspiration system through the table; operator console with joystick, Start/Stop, emergency stop, and manual modes. Cutting capacity The Hypertherm HPR260 plasma system is a 260 A industrial system for high-quality plasma cutting. Approximate capacity for mild steel: production piercing: approximately 32–38 mm, depending on the material, gases, and settings; maximum cutting from edge: up to approximately 60–64 mm; oxy-fuel cutting allows for working with thicker steel sheets, depending on the settings, nozzles, and gas equipment.

Condition: used, Year of construction: 1995, functionality: fully functional, BANCO DI TAGLIO AL PLASMA usato SOITAB da mt.4x2, CON GENERATORE HYPERTHERM MAX 200, revisionato e con CNC nuovo. Itodpfx Aszh Dg Isnyok SP. MAX 40mm IN FE SP. MAX 20mm IN INOX Viene fornito tutto revisionato con controllo CNC nuovo ed installato dal cliente con corso di formazione all’uso, tempi 30/40gg per ultimare il lavoro,prezzo chiavi in mano finito compreso di filtro usatto ma escluse le predisposizioni elettriche ed il camino fumi dal filtro al al tetto.

Condition: used, Year of construction: 1991, Engel ES 330/80 Year of manufacture: 1991 Weight: 4000 kg Closing force: 800 kN Dimensions: 3910 mm x 1380 mm x 2050 mm (L x W x H) Control system: CC100 Design: Tie bar, toggle lever The machine is in good condition and has been regularly maintained with short intervals during operation. The machine is connected and fully functional. An inspection with a test run is possible. All documents for the machine are available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Technical details: Operating voltage: 400 V 3 ~ 50 Hz Screw diameter: 45 mm Screw geometry: 3-zone Metering stroke: max. 160 mm Nozzle thread: M28x1.5 Max. injection pressure: 1300 bar Injection weight PS: 239 g Itodpjyu Rzyefx Anyok Tie bar distance (horizontal): 405 mm Tie bar distance (vertical): 345 mm Opening stroke: max. 430 mm Installation height: min. 150 mm

Condition: used, Year of construction: 2019, operating hours: 4,240 h, functionality: fully functional, Used Cone Crusher HCU 7/160 After Complete Refurbishment – Available Immediately We offer for sale a fully refurbished cone crusher HCU 7/160 after complete overhaul and replacement of internal wear parts with new ones. The machine is in very good technical condition and ready for immediate operation. Price: EUR 89,900 – complete crushing unit + EUR 16,890 – new hot-dip galvanized supporting steel structure with stairs, walkways, and operator platform Scope of Supply 01 – Complete Crushing Unit with Cone Crusher HCU 7/35-160 Includes: Hydraulic cone crusher HCU 7/35-160 Oil station for crusher setting adjustment and bearing lubrication Common frame for crusher and drive Feed hopper 4 pcs rubber springs (silent blocks) Positive pressure dust protection system for crusher and oil tank (filter + blower) 90 kW drive, 400 V, 50 Hz Automatic control system with visualization Automatic grease lubrication Power control cabinet, Y/D motor starting Refurbishment and Technical Condition Complete general overhaul of the machine New internal wear parts Refurbished electrical control cabinet Ready for immediate operation Robust design suitable for quarries, recycling, and mining operations Optional – New Steel Structure Available completely new: Hot-dip galvanized supporting steel structure Ijdsy Nxnrspfx Anyjtk Stairs Service walkways Operator platform Structure price: EUR 16,890 Please contact us for more information or a commercial offer.

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Itedsqy E I Rspfx Anysk

Condition: used, Year of construction: 2018, functionality: fully functional, HCU 7/160 Cone Crusher Year of manufacture: 2018 Crusher inlet [mm]: 160 CSS [mm]: 12-32 mm Iodezl N Ulopfx Anystk Motor [kW]: 90 Hydraulically adjustable gap The crusher produces cubic material and is suitable for the hardest materials. Crusher with oil tank and 90 kW motor Crusher with control cabinet and PC control Galvanized support structure included Machine is fully operational

Condition: like new (used), Year of construction: 1999, operating hours: 68 h, functionality: unexamined, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 3,200 mm, total height: 2,270 mm, fuel: diesel, overall weight: 2,500 kg, continuous power (apparent): 160 kVA, continuous power: 128 kW (174.03 HP), rotational speed (max.): 1,500 rpm, input current: 317 A, input frequency: 50 Hz, Make: Elbe Model: VP160/220 Itedpfx Aszvapzenyjk Year of manufacture: 1999 Serial number: 8623 Operating hours (recorded): 68 Capacity (kVA): 160 PRP / 220 STD Capacity (kW): 128 PRP / 176 Engine make: Volvo Penta Engine model: TD710G Fuel: Diesel Alternator make: Mecc Alte Alternator model: ECN37-SD4 Voltage: 230-400 Frequency (Hz): 50-60 RPM: 1500-1800 Amperes (A): 317 Dimensions L x W x H (mm): 3200 x 1000 x 2270 Weight (kg) approx.: 2500 Quantity in stock: 1 Manufactured in: Germany Comments: Ex emergency generator set in good condition.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 1,800 mm, grinding width: 850 mm, total height: 2,955 mm, total length: 6,650 mm, total width: 3,645 mm, grinding height: 750 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 5 m/min, grinding wheel diameter: 457 mm, table load: 2,160 kg, grinding wheel width: 203 mm, spindle speed (max.): 1,400 rpm, overall weight: 13,000 kg, grinding spindle motor power: 30 W, travel distance X-axis: 1,820 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 820 mm, rotational speed (max.): 1,400 rpm, WORKING CAPACITY: Max. grinding length: mm 1.800 Max. grinding width: mm 850 Max. grinding height: mm 750 GRINDING WHEEL HEAD: Power: kW/HP 30/22 Grinding wheel dimensions: mm 457 x 203.2 x 100 Grinding wheel speed: rpm 1.400 LONGITUDINAL TABLE AXIS: Speed: m/min 1 ÷ 40 Maximum load (with magnetic table): kg 2.160 Grinding table dimensions: mm 1.800 x 600 Working stroke: mm 1.820 TRANSVERSE GRINDING HEAD AXIS: Rapid traverse speed: m/min 5 Adjustable incremental feed: mm 1 ÷ 50 Continuously adjustable feed rate: mm/min 0 ÷ 2.000 Minimum working increment: mm 0.001 Working stroke: mm 750 VERTICAL GRINDING HEAD AXIS: Rapid traverse speed: m/min 1.5 Minimum working increment: mm 0,001 Iedpfjztzyvjx Anyjtk Working stroke: mm 820 OVERALL DIMENSIONS: Length: mm 6.650 Width: mm 3.645 Height: mm 2.955 Total weight: kg 13.000 Machine complete with: • Instruction manuals and CE Declaration of Conformity

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller model: HEIDENHAIN TNC 530, workpiece weight (max.): 4,000 kg, overall weight: 35,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40 (DIN 69871), number of slots in tool magazine: 60, CNC Machining centre DECKEL MAHO DMU 160 P TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: HEIDENHAIN TNC 530 Number of simultaneous axes: 5 Stroke X axis: 1600 [mm] Stroke Y axis: 1250 [mm] Stroke Z axis: 1000 [mm] Feed rate on X, Y and Z axes: 15000 [mm/min] Traversing feeds X, Y and Z axes: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Max. load on table: 4000 [Kg] Spindle type: SK 40 (DIN 69871) Min. spindle speed: 20 [rpm] Max. spindle speed 12000: [rpm] Tool changer magazin number of stations: 60 Machine weight: 35000 [Kg] INCLUDED EQUIPMENT: 1 × HEIDENHAIN part probe 1 × laser measuring system for tool setting and tool monitoring 3 × HEIDENHAIN linear glas scales on the X, Y and Z axes 1 × through-spindle coolant system 1 × chip conveyor Itodpfx Ajzggmbenyjk 1 × paper-band filtration unit (paper filter system) More information upon request.

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Type: COMBIREX DX 3500 Isdpfjzc Hn Eox Anyotk Machine No.: 21214714 Year of Manufacture: 2012 If you have any questions or require further information, please contact us by email or phone.

Condition: used, Year of construction: 2007, Technical details: spindle diameter: 160 mm x-travel: 6500 mm y-travel: 3000 mm W-axis (spindle longitudinal): 1000 mm dimension of the ram: 400 x 420 mm ram stroke: 1000 mm bore spindle turning speed range: 1 - 2000 U/min spindle taper ISO: 50 feed speeds: 2 - 6000 - 8000 mm/min rapid speed: 8/10 m/min total power requirement: 100 kW weight of the machine ca.: 76 t dimensions of the machine ca.: 12 x 4 x 7,5 ( 5,4 ü.F. ) m with CNC Steuerung HEIDENHAIN iTNC 530 autom. toolchanger 40-pockets autom. Pickup Station for universal milling head, and facing head rotary table 2500 x 2500 mm , max load 25 to. 1500 mm longitudinal movement floor plate 4000 x 2000 mm measuring probe, chip conveyor and coolant attachment * Isdpfezuy Sgjx Anyetk