Used Pneumax Parker Pes-C11F4 for sale (1,419)

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. Gedpfxjw Au A Eo Acasuh + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg Gjdpfx Acswrcwpoaouh incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. Based on these cyclical loads and accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving carriage All-round grids in the moving carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber can be used as a temperature cycling device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Guodpjwbdv Ssfx Acajh Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Refrigerating unit: Water-cooled Weight: approx. 940 kg Year of construction: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, mileage: 256,849 km, power: 140 kW (190.35 HP), first registration: 07/2017, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 17, Equipment: ABS, air conditioning, navigation system, * Our internal number: 1104 * Mercedes-Benz Sprinter 519 CDI ToJo * PICK-UP PRICE * Automatic transmission * Air conditioning for driver's seat * Air conditioning for passenger compartment * Manual wheelchair ramp * Folding tables * Convector heater * Adjustable seats * Seats with 3-point seat belts * Airline track system in the vehicle * Trailer hitch * Ambient ceiling lighting * Nozzle ventilation * Reading lights * Microphone * DVD player * Monitor Gjdewnlhiepfx Acasuh * Fog lights * Rear view camera * Reversing lights * Multifunction steering wheel * Tinted windows * The customer is obliged to independently verify the condition and features of the goods/vehicle! * etc. * All information without guarantee * We reserve the right to sell the vehicle in the meantime * We refer to our general terms and conditions.

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Tracked Undercarriage Manufacturer: NIKO Max. speed: 4.8 km/h forward, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 Air-cooled Four-stroke Diesel Engine, 7.6 kW ≙ 10.36 HP (Separate) generator for power supply, installed within the undercarriage, making autonomous operation possible even without the body structure (decontamination module); 230/400 V Generator Manufacturer: GTS, 400/230 V At 400 V: 6.4–8 kW; 11.6 A; 8 KVA At 230 V: 4–5 kW; 21.7 A; 5 KVA Single-lever control for driving and steering movements Hydrostatic drive Electric starter Hand-operated cable winch Headlights Foldable driving platform Parking brake Operating voltage undercarriage: 24 V Decontamination Module 4 (enclosed body): Kärcher HY 10/8; Equipment: TEP90, Gusdex Edb Hepfx Acaeh Fresh and waste water tanks, spray and suction pump, electric tank heater (water heating) Body structure tiltable and removable by spring bolts and 380 V plug The vehicle was intended for the German Armed Forces (Bundeswehr) for decontaminating vehicle interiors. It was only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Body weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Additional attachments possible: stake body frame, tipper body, flatbed, etc. Indicated operating hours as per display. Vehicle preferably sold to businesses or for export; private sales subject to reservation. Sale without warranty. Net price for export: Net: €6,800 + (19% VAT) €1,292 = Gross: €8,092 The above information is non-binding. Errors, changes and prior sale reserved. Export license required. Tel: 08026/2188

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Tracked chassis manufacturer: NIKO Max. speed: 4.8 km/h forwards, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 air-cooled four-stroke diesel engine, 7.6 kW ≙ 10.36 HP (Separate) generator for power generation integrated into the chassis, making stand-alone operation possible even without the box body (decontamination module), 230/400 V power supply Generator manufacturer: GTS, 400/230 V, At 400 V = 6.4 – 8 kW; 11.6 A; 8 KVA At 230 V = 4 – 5 kW; 21.7 A; 5 KVA Single-lever control for driving and steering Hydrostatic drive Electric starter Gsdox Edckjpfx Acaouh Hand winch Headlights Folding driver’s platform Parking brake Chassis operating voltage: 24 V Decontamination module 4 (box body): Kärcher HY 10/8; equipment: TEP90, fresh and waste water tanks, spray and suction pump, electric tank heater (water heating) Box body can be tilted and removed using spring bolts and 380 V plug The vehicle was intended for the Bundeswehr to decontaminate vehicle interiors. Only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Body weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Further attachments possible: stake frame, skip body, flatbed, etc. Operating hours as per display Vehicle preferably sold to commercial users or for export, private sale conditional. Sold without warranty. Net price for export Net: 6,800 EUR + (19% VAT) 1,292 EUR = Gross: 8,092 EUR The above information is non-binding; errors, changes, and prior sale reserved! Export license required. Tel: 08026/2188

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical specifications: Operating voltage: 400V AC, 3PH/PE Frequency: 50Hz Connected load: 110kVA Gujdpfxexzuc Ho Acash Main supply fuse: 200A Production capacity: depending on material to be processed, 20m/min / 6" core up to max. 830mm diameter / up to 1.4t Degree of automation: fully automatic Installation dimensions: 5.2x3.7x3.2m (LxWxH)

Condition: used, Year of construction: 2014, Marel MS2730 Filleting Machine with Back Bone Trim Gjdpfxezl Sydo Acajuh High-performance automatic salmon filleting machine Available from August / September. This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018). Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor. Key Features - Automatic salmon filleting machine - Equipped with Back Bone Trim - High fillet yield and excellent cutting accuracy - Automatic adjustment to varying fish sizes - User-friendly touchscreen control - Hygienic stainless-steel construction - Easy access for cleaning and maintenance - Compact footprint - Annual maintenance carried out by Marel - Good working condition Technical Specifications - Manufacturer: Marel - Model: MS2730 - Capacity: Up to 25 fish per minute - Fish size: Approximately 1.5 – 8 kg - Power supply: 3 × 400 V + N + PE (50 Hz) - Power consumption: Approx. 5.5–7.0 kW (depending on configuration) - Water consumption: Approx. 15 L/min - Compressed air: Approx. 230–250 L/min at 6–8 bar - Dimensions (L × W × H): Approx. 3,150 × 1,035 × 1,980 mm - Weight: Approx. 1,450 kg (configuration dependent) Condition The machine has been serviced annually by Marel and remains in good operational condition. It is still installed and can be inspected under power by appointment. Availability: August / September. For additional information, pricing, or to arrange an inspection, please contact us. More photos and full specifications: / * Manufacturer: Marel * Model: MS2730 * Fish size: Approximately1.5 – 8 kg * Power consumption: Approx.5.5–7.0 kW(depending on configuration) * Weight: Approx.1,450 kg(configuration dependent)

Condition: excellent (used), Year of construction: 2022, 512 USED Debag Monsun GUV cooling-proofer, freezer chamber. INTERNAL DIMENSIONS (in cm): Guedjzugi Sepfx Acaeh - W: 150 - L: 260 - H: 190 TECHNICAL DATA: - refrigerant: R449a - power supply: 400 V AC, 50 Hz, 3/N/PE - power: 9.8kW Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Working floor load: max. 350 kg Godjzx S Iujpfx Acajuh Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Fusing: 3 × C16 A Rated current L1: 0.8 A Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual CE / conformity documents

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Guedpfszw D Hajx Acash Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: excellent (used), Here, we offer you a Ytterbium fiber laser. The LSS5 M laser welding tongs complement the product series as a compact welding tool. With laser powers ranging from one to four kilowatts, integrated cooling technology, and a user-friendly control unit, this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet metal pairings, or aluminum. Trifocal technology 3500W laser tongs Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 – 600 Power requirement 3500 W laser power Laser duty cycle 30% (with cooler) 3.5 kW Dimensions, controller W × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F 400-460V AC 3P/PE 50/60Hz 32A/120k Type: Laser welding tongs LSS-5M-3500-3F Gedezd Rinepfx Acaeuh Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,767 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 570 mm, total height: 1,800 mm, total width: 1,350 mm, overall weight: 2,500 kg, bar diameter (max.): 52 mm, controller manufacturer: SIEMENS, product length (max.): 2,100 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis SPINNER TC 52 MC was manufactured in 2007. It features a robust design with optional equipment including a bar feeder, parts catcher, and a turret with driven tools. The machine is equipped with a collet chuck for clamping and a dust extraction system for efficient operation. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 52 MC horizontal turning machine we have for sale. The machine is faulty. The hydraulic pump is no longer building up pressure. The Spinner TC 52 is no longer being repaired and is being sold as not fully functional. Contact us for further details. • Number of Live Tools: 12 • Live Tool Speed: 6,000 rpm • Live Tool Torque: 23.5 Nm • Rapid Traverse X/Z: 15 / 24 m/min • Maximum Turning Diameter: 280 mm • Maximum Swing Diameter: 400 mm • Distance Between Centers: approx. 550 mm • Main Spindle Nose: A6 • Bar Capacity: 52 mm • Main Spindle Torque: 92 Nm • Coolant Tank Capacity: approx. 85 l • Coolant Pressure: 8 bar • Supply Voltage: 3/PE ~ 400 V • Collet Chuck Used for Clamping • Dust Extraction System • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 34 A • Rated Current (IN): 35 A • A collet chuck used for clamping • Turret with driven tools Optional equipment: • Bar feeder • Parts catcher Gedpfszlq I Tsx Acasuh • Chip conveyor • TailstockThe machine is faulty. The hydraulic pump is no longer building up Spinner TC 52 is no longer being repaired and is being sold as not fully functional. Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 30

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front Godezf Eh Ujpfx Acasuh 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: used, Year of construction: 2016, with a new conveyor belt. Functional Description(Source: Excerpt from the operating instructions) This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Guodpfx Acozf N Rgsash Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock

Condition: used, length 800 mm height 650 mm total power requirement 3,7 kW weight of the machine ca. 75 kg dimensions of the machine ca. 800 x 330 x 650 mm Technical Specifications Continuously adjustable range [A] 35â??270 Duty cycle (DC) at Imax. (10 min) [%] 30 (40) Welding current at 100% duty cycle [A] 160 Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 5.5 Protection class IP 21 Included accessories: - Hose set - Pressure regulator - Ground cable - Basket coil adapter Guedpsz Auivjfx Acajh

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Gusdsz Arh Aspfx Acaoh Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Year of construction: 2019, condition: excellent (used), input voltage: 400 V, machine/vehicle number: 3365, BVL Yukon DAK-2 BL 500/400/4000, year of manufacture 2019, machine no. 3365. Two-track continuous washing system for aqueous cleaning and degreasing of shafts, followed by drying. The two washing tracks are separated by a partition and each has its own washing tank. The parts are cleaned on each track and then blown off/dried. The system was designed for integration into a production line with an on-site pallet conveying system. Technical data: - Two washing tanks, each with a capacity of 1,000 liters - Electric tank heater: 2 x 45 kW - Documented washing temperature range: 45-60 °C - Washing pumps: 2 x 4.0 kW; spray pressure 3.0 bar each - Coarse filter: 1 mm; bag filter: 50 µm per washing circuit - Usable length: 250 mm; usable width: 2 x 250 mm; usable height: 400 mm - Control system: Siemens SIMATIC S7-1500, CPU 1513-1 PN - Operator panel: Siemens TP700 Comfort - Operating voltage: 3 x 400 V, N+PE, 50 Hz Equipment: - Unheated drying with side-channel blower and blow-off fan per track - Automatic cleaner dosing and concentration monitoring via Libelle Cleaner Control Gjdpfx Acsz A Eidoasuh - Condenser - Automatic cleaning of the blow-off zone - Nozzle system with quick-release fittings - Four viewing windows with internal lighting - Control panel on the support arm system Transport/installation dimensions according to the layout plan: 4,000 x 2,000 x 2,938 mm (L x W x H). Technical documentation available, including operating manual, layout plan, electrical and pneumatic diagrams, maintenance documents, spare parts lists and PLC project archive. Location: Waldmohr. Condition: very good (used). Price on request. Internal reference: 781461. Technical data according to available manufacturer documentation.

Condition: used, Euro Classic range – Inox finish Electrical power 400 V three-phase Power supply 3N~ 50/60 Hz Maximum power 9.5 kW Average hourly consumption 4.5 kW/h Capacity 9 pizzas Ø 30 cm Tray capacity 2 x 600 x 400 mm Chamber 930 x 930 x 170 mm Maximum temperature 450 °C Independent digital regulation for dome / hearth Dome, hearth, walls, and bottom made of refractory material Heating elements inserted into the stone Counterbalanced door with lower swing Panoramic glass window Protected internal halogen lighting External dimensions 1320 x 1260 x 400 mm Net weight 200 kg Stackable up to 3 chambers General description The Italforni Euro Classic EC9-I professional electric pizza oven features a 930 x 930 x 170 mm chamber that can bake up to 9 pizzas with a diameter of 30 cm simultaneously or accommodate 2 trays of 600 x 400 mm. It reaches 450 °C and benefits from independent electronic digital regulation for the dome and the hearth. What makes this model stand out Its chamber is entirely made of high-density refractory material: dome, hearth, side walls, and bottom. This design promotes insulation, thermal homogeneity, and temperature recovery, as advertised for this model. The armored “hy•pe” heating elements are inserted directly into the stone to limit energy loss. Key advantages Gsdpfszx Dztjx Acasuh Capacity of 9 pizzas Ø 30 cm Independent dome / hearth regulation Entirely refractory chamber Maximum temperature of 450 °C Counterbalanced door with panoramic window Protected internal halogen lighting Stackable up to 3 chambers, and a smoke extraction module is possible.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 9001522010300263, type of input current: three-phase, input voltage: 400 V, Widepower MKT 15K UPS - 15kVA/13.5kW, Three-Phase: Online double-conversion UPS, three-phase, up to 2 hours autonomy at 8kW load. AC input/output: 400V 3P+N+PE, 50Hz. DC bus: 240VDC. Purchased new in 2023 (original invoice available). Condition: Very good. Suitable for warehouses, small industrial facilities, server rooms, or technical rooms requiring three-phase backup power. Buyer should organise delivery. UPS Widepower MKT 15K - 15kVA/13,5kW, Trifásica: UPS online de dupla conversão, trifásica, com autonomia até 2 horas a 8kW de carga. Entrada/saída AC: 400V 3P+N+PE, 50Hz. Barramento DC: 240VDC. Adquirida nova em 2023 (fatura original disponível). Estado: Optimo. Ideal para armazéns, pequenas indústrias, salas de servidores ou salas técnicas que necessitem de alimentação trifásica de emergência. O comprador deve organizar/providenciar a recolha. Does not include VAT in the price Gujdpfx Acezxtxbsaeh

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 36, number of axes: 3, This 3-axis AXA VHC-3-3000-M/E was manufactured in 2002. It features an impressive X-axis travel of 2940 mm, Y-axis travel of 900 mm, and Z-axis travel of 950 mm. The machine includes a robust table size of 4350 x 900 mm and a spindle speed range of 40 - 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the AXA VHC-3-3000-M/E vertical machining centre we have for sale. Contact us for further details. Table Clamping Surface: 4350 x 900 mm (with 7 T-slots 18H7 RTA integrated)Swivel Head: Stepless positioning swivel headNC Rotary Table: Type RTA 4 L - 800Spindle Speed Range: 40 - 12,000 rpmSpindle Taper / Tool Holder: SK 40 DIN 69871-A (Hohlwellenmotor, water-cooled)Spindle Note: Spindle replaced/renewed a few years ago for nearly €30,000Tool Changer: 36 positions, movable in Y-directionConnected Load: 69 kVAVoltage: 3x400V/230V/N/PE, 50 HzControl Voltage: 24 V DCFuse Protection: max. 125 AAdditional Equipment:External band filter coolant system Type SA 25/600 (30 bar, 400 Liters)Slat conveyor chip conveyor Type FSB 300 (discharge height 1200 mm, left side)Minimum quantity lubricationElectric handwheel HR 4103D Touch Probe Type MP 10 EVisport (Fabrikat Hema)Heat exchanger Type SK3328 (Fabrikat Rittal)2 Hand spray guns Technical Specification Gedpfx Ajz Iyppecaeuh Taper Size SK 40

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Guedpfx Asz I Dimecajh Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: used, Year of construction: 2010, functionality: fully functional, Robotic palletizing system from W+D Langhammer, manufactured in 2010, featuring an ABB IRB 660 M2004 palletizing robot, ABB IRC5 M2004 controller, conveyor system, and safety enclosure. System manufacturer: W+D Langhammer GmbH System type: Robotic palletizing Year of manufacture: 2010 Factory number: A1005300-146900 Robot manufacturer: ABB Robot type: IRB 660 M2004 Robot variant: IRB 660-180/3.15 Robot manufacturing date: 07/30/2010 Robot serial number: 66Z-63572 Robot net weight: 1,750 kg Load capacity according to robot variant: 180 kg Reach according to robot variant: 3.15 m Robot controller: ABB IRC5 M2004 Version: 144A 400–480V Controller voltage: 3 × 400 V Frequency: 50–60 Hz Rated current: 20 A Short-circuit current: 6.5 kA at 400 V Controller net weight: 150 kg Controller manufacturing date: 08/02/2010 Robot operating device: ABB Teach Pendant System operation: Siemens SIMATIC Multi Panel Gripping system: Palletizing gripper included Conveyor system: Roller conveyors and infeed belts Safety enclosure: approx. 8 × 8 m Infeed belts: 2 units, each protruding approx. 1 m from the safety enclosure Outfeed roller conveyors: protruding approx. 2 m from the safety enclosure Gujdpez Dnu Ejfx Acaeh Langhammer system voltage: 3 × 400 V N PE Langhammer system frequency: 50 Hz Full load current: 35 A Short-circuit breaker: 50 A Note: The infeed and outfeed belt marked in the layout below with a red diagonal line is not installed and is not part of the system offered.

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel Godpfx Acoz Hckmjaouh - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA08, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Gjdpfsz Ipdcex Acaouh F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.