Used Pressure Shoe for sale (14,820)

Year of construction: 2025, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Hjdpfof A Nqqex Ab Tet Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1 to 80 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blow gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring support • Door opening monitoring via safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Internal lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm • External mini pneumatic oil separator

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off Hjdpfxjvnv Tqs Ab Tjt - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: new, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, input voltage: 230 V, overall weight: 101 kg, warranty duration: 12 months, temperature: 80 °C, TECHNICAL DATA OF THE KARCHER HDS 6/15 C WASHER: Model: HDS 6/15 C Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 260 - 560 Working pressure (bar/MPa): 30 - 150 Maximum pressure (bar/MPa): 160 Maximum water temperature (°C): 80 Hjdpsv Tng Hjfx Ab Tot Connection power (kW): 3.4 Power cable (m): 5 Fuel tank (l): 15 Weight (kg): 101 Dimensions (length x width x height) (mm): 1066 x 650 x 920 EQUIPMENT OF THE KARCHER HDS 6/15 C WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional 10M !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC eco!efficiency mode - economical and environmentally friendly, even during longer periods of use - Reduces fuel consumption and CO₂ emissions by 20%. Easily accessible water filter protects the pump from impurities in the water. Safety valves, protecting against lack of water and fuel Water softening system to protect the heating coil from scale deposits. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the service life of all pump components on the high-pressure side. Practical handles on the housing + integrated nozzle storage A built-in funnel for filling the cleaning agent prevents accidental spillage of chemicals. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has the EASY!Lock equipment mounting system that allows 5x faster equipment changes than a traditional thread system. The device is completely new and factory-packed

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz Hedpjhf Naksfx Ab Tet CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: new, Year of construction: 2023, operating pressure: 1,000 bar, fuel: diesel, Kärcher HD 9/100 De Skid Advanced Hodpevz Aq Aefx Ab Tot High pressure cleaner with up to 1000 bar This is an unused exhibition device! Current manufacturer RRP €80,000! The machine is being sold as a used machine with no return, guarantee or warranty. Net price €24,900 // Gross price €29,631 - Viewings possible! - Shipping can be organized nationwide, costs €300 - We would be happy to have our leasing partner create an attractive leasing/financing offer for you!

Condition: excellent (used), Kontron 325 Tenary Low-Pressure Gradient Pump HPLC up to 10 mL - Pump system for tenary low-pressure gradients - All low-pressure gradient devices integrated into one solution system - 10 programs with customized instructions - Column shock protection extends shelf life - Intelligent compressibility compensation Hsdpfxslkbpte Ab Tot - Stackable with other/additional HPLC modules - Full control of the AUtosampler 360 via the keypad with a display Type: Double series-piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby, and sapphire Flow rate: 0.05 to 10 mL per minute Flow rate precision: 0.3% RSD (at 1.5 mL/min) Flow rate accuracy: 2% (at 1.5 mL/min) Flow linearity: r2 > 0.998 Pressure: 40 MPa or 7500 psi (flow-dependent) Pressure sensor: Piezoelectric sensor Display: 2x40-character LCD External control: RS-232C Inputs: Injection synchronization, flow stop Outputs: Pressure and drive alarm, pressure signal, relay injection, relay step, RS-232 (for Autosample 360) Power supply: 110/220 V +-10%, 50/60 Hz, 120 VA Dimensions: 40 cm wide, 54 cm deep, and 17 cm high Find more items - new and used - in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2001, Bütfering Classic 211 CE wide belt sander Working width 1100 mm Sanding belt width 1120 mm Sanding belt length 1900 mm constant table top head infeed 1st unit type C combined contact roller sanding pad unit with -profiled steel contact roller. -Electronically controlled sectional sanding pad, element width 50 mm -Motor power 15kW 2nd unit type E -Sanding shoe unit -electronically controlled link pressure beam, element width 25 mm -Motor power 15 kW -Infinitely variable sanding belt speed 2 to 18 m/s via frequency converter Synchronous and counter-rotation -Belt blow-off device Transport carpet with infinitely variable feed2.5 - 13 m/min Vacuum clamping device 4 kW Hodpfxjt Ucp Ue Ab Tet Control of the suction slides Roller tables in the inlet and outlet Workpiece cleaning : Rotating cleaning brush 0.75 kW Machine function tested Price 15500.- year of construction 2001

Year of construction: 2008, condition: excellent (used), Stationary high-pressure pump unit Hammelmann HDP 77 on a base frame. Similar to/not an Uraca, Woma, or Kamat. Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min Drive speed: 1800 RPM Drive power: 65 kW Hsdpfx Abjd Rmqpe Tst with AC 55 kW 3~ motor AH 250 M-4; 400V; 50 Hz with frequency inverter Dimensions L x W x H: approx. 1665 x 1212 x 1641 mm Weight: approx. 1050 kg Year of manufacture: 2008 Condition: in very good used condition. Includes complete documentation.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh Hjdpfxefdkb Eo Ab Tjt INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: used, Rotary vane compressor Manufacturer: Becker Type: VT4.25 Hedjb Ii Aropfx Ab Tjt Voltage: 400V/50Hz Warranty: 12 months Condition: General overhaul and newly painted Pressure output: 25 m³/h Maximum final pressure: +1 bar (relative) Accessories: Operating manual

Condition: as good as new (ex-display), Rotary vane vacuum and compressor – dry-running Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V, three-phase Suction capacity: 100 - 140 m³/h Compression pressure/vacuum: Optional: ±0.5 bar / ±1 bar / ±1.5 bar Hsdpfx Abjdbb Aks Tot Condition: Demonstration unit Warranty: 12 months

Condition: new, Year of construction: 2025, Abrasive blasting cabinet DSK 1102 S with trolley and rotary table. Width: 1500mm, Depth: 1235mm, Height: 995mm Lift-up door, pneumatic. Hsdpfxedhl Ngj Ab Tet If you have any questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contact persons.

Year of construction: 1979, condition: used, machine/vehicle number: 79-207, jaw width: 125 mm jaw height: 42 mm Hedj Avhdopfx Ab Tot span width: 202 mm

Condition: good (used), Rotary vane compressor – dry-running Manufacturer: Becker Type: KDT 3.140 Hodpfxjb Nu D Aj Ab Tot Motor: 400V 7.5 kW / 50Hz Suction capacity: 140 m³/h Compression pressure: 2500 mbar (abs.) / 1500 mbar (overpressure) Condition: General overhaul and newly painted Warranty: 12 months Accessories: – Operating manual We are happy to answer any questions you may have.

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron Hsdporl U S Eofx Ab Tet - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Condition: good (used), Year of construction: 2009, machine/vehicle number: HD 10906347, pressure: 350 bar, overall weight: 850 kg, rotational speed (max.): 1,500 rpm, power: 35 kW (47.59 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2009 Type: RS716E/350 Serial number: HD 10906347 35 kW 350 bar 1500 1/min 47 l/min With Küenle KDGN 225S4 NV 400 / 690V 67.2 / 39A 50Hz Hedpfx Ajtuqmkjb Tet 37kW 1475 1/min Condition: used (see pictures and nameplates) Scope of delivery: 1 pump

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, The filter body is original PENTAS, Czech/EU production. The automation system has been newly built and has never been used. Main data: - Manufacturer: PENTAS Horice a.s. (CZ-EU) - Model / type: AO-9N - Type: vertical pressure leaf filter - Filtration area: approx. 10 m² - Filter body: stainless steel - Vessel volume: 830 l - Max. working pressure: 0.5 MPa Hsdstxc Hpjpfx Ab Tot - Max. working temperature: 40 °C - Weight: approx. 760 kg - Year of filter vessel: 1999 - Automation: new and unused - Control: PLC control cabinet - Valves: pneumatic valves - Includes piping, fittings, sensors and automation system - Location: Slovakia, EU Suitable for filtration of vegetable oil, rapeseed oil, sunflower oil, soybean oil, technical oils, biodiesel and oleochemical applications. The filter vessel is used, but the automation system is completely new and unused. The unit is designed for automatic operation with pneumatic valves, sensors and PLC control. Fully functional according to seller information. Sold as shown in the photos. Loading possible. Worldwide shipping on request. 7. Nemački dodatak Zu verkaufen: PENTAS AO-9N Edelstahl-Druckblattfilter mit ca. 10 m² Filterfläche. Der Filterbehälter ist original PENTAS, tschechische/EU-Produktion. Die Automatisierung wurde neu aufgebaut und ist unbenutzt. Technische Daten: - Hersteller: PENTAS Horice a.s. (CZ-EU) - Modell / Typ: AO-9N - Vertikaler Druckblattfilter - Filterfläche: ca. 10 m² - Edelstahl-Filtergehäuse - Behältervolumen: 830 l - Max. Betriebsdruck: 0,5 MPa - Max. Betriebstemperatur: 40 °C - Gewicht: ca. 760 kg - Baujahr Filterbehälter: 1999 - Neue, unbenutzte Automatisierung - PLC-Schaltschrank - Pneumatische Ventile - Rohrleitungen, Armaturen, Sensoren und Steuerung inklusive - Standort: Slowakei, EU Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen. Der Filterbehälter ist gebraucht, die Automatisierung ist neu und unbenutzt. Voll funktionsfähig laut Verkäuferangabe. Verkauf wie auf den Fotos. Verladung möglich. Versand auf Anfrage.

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Hedpjxz Hh Ujfx Ab Tst Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: ready for operation (used), Year of construction: 2021, operating hours: 288 h, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, overall weight: 1,800 kg, production capacity: 1,350 unit/h, No minimum price – guaranteed sale to the highest bidder! Automatic, linear, electro-pneumatic counter-pressure filling and capping system + rinser, infeed conveyor, and automatic labeling machine from the manufacturer ENOS! The machine is being sold due to a changeover to aluminum cans. The system is fully operational and has been internally maintained according to the manufacturer's instructions. Note: The seller will handle the dismantling of the machine. The buyer is only responsible for loading the machine for transport. TECHNICAL DETAILS Production capacity: 1,350 units/hour Bottle format: 33cl long neck, crown cap 26mm With the same diameter of 60.4 mm, various bottles are possible (automatic height adjustment) MACHINE DETAILS Usage: 282,000 bottles filled Operating time: 288 filling hours Input voltage: 400 V Operating pressure: 8 bar Input frequency: 50 Hz Type of input current: Three-phase Hsdpfx Ajzh Dtbjb Tet Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,200 x 2,100 mm Total weight: 1,800 kg EQUIPMENT Rinser Infeed conveyor Automatic labeling machine

Condition: new, Universal belt sanding machine for wood and veneer sanding, 2 rubber coated pressure wheels and sanding shoe, electrical table height adjustment, automatical delta-wye conversion, amperemeter, digital height display, Technical data: Hsdpfx Abjvrv Hlo Tet Motor output power S1 7,5 kW Feed speed 4,5 and 9 m/min Sanding belt dimensions 1900 x 650 mm Diameter working wheel 160 mm

Condition: new, The new Holzprofi Profi feeder for band saws is characterized by its easy assembly and the great operator convinience. Feed rolls made of aluminium. Roll stop with pneumatic flap valve and mount casting. Technical data: Quantity feed rolls 2 Dimensions feed rolls 175 x 40 mm Speed 10 from 1 up to 15 m/min Engine power 375 W, 400 V Weight appr. 79 kg Technical data stop: Length 400 mm Height 200 mm Adjustment range 0-210 mm Hodpfsvrv Ipex Ab Tet Roll diameter 20 mm Quantity of rolls 18 pcs.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Category type: Sander - Polisher Volume: 1 - 1 Convert Sells to: Worldwide I sell the widebelt sanding machine COSTA S CCTT 1350 Configuration 1pc. hard rubber cylinder 1pc. soft rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed Pressure shoes for short elements Air-blow on all units Vacuum underpressure table with integrated ventilator Designed for the line with fixed working height and moving aggregates 4 motors total power 96kW Condition very good ! Available immediately Hsdjwrm Sdspfx Ab Tet

Year of construction: 2010, condition: as good as new (ex-display), Woma 1002 P35 High Pressure Pump in New Condition 300 bar - 84 ltr/min - 1500 rpm Hsdpfx Ajf Dybzeb Tst 300 bar - 101 ltr/min - 1800 rpm

Condition: like new (used), operating hours: 1,606 h, functionality: fully functional, Well-functioning electrically powered Woma 1502 Hsdpfx Abev Stknj Tet 415 bar - 133 ltr/min

Condition: as good as new (ex-display), Brand new never used. Please check out our other listings as well. Hodpfxou Ur Ufs Ab Tot