Used Pullmax Plate Edge Welding Slanting Machine for sale (71,390)

Condition: good (used), PRIMULTINI - grinding machine for knives - grinding lenth max 800 mm Hsdpfx Alsyzy Nbs Sel - technical condition good

Condition: good (used), Welding current range - 200 A Weight: 158 kg Accessories / Special features: - separate ESAB A 10 wire feed unit with 2-roll wire feeder - including hose package and ground cable Siegfried Volz Werkzeugmaschinen Hedpefkpgdofx Al Sjl Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets with a rigid blade! Technical Specifications: Cutting Height: 2,150 mm Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Dimension setting for horizontal cuts: electronically adjustable via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Hjdpfx Aleyymhus Sjl Features: Solid, enclosed rear wall with felt support (new) Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade

Year of construction: 2004, condition: used, functionality: limited functionality, Machine for automatic pressing of tube-plate evaporators. Hjdpfx Aoyt Sqgsl Sel

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Hedpfxjyx Hpie Al Sel Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: new, functionality: fully functional, Year of construction: 2023, machine/vehicle number: M170-382, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (top) diameter: 170 mm, roller length: 1,600 mm, working width: 1,600 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, overall weight: 2,310 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,130 mm, power: 55 kW (74.78 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, We are offering this hydraulic plate rolling machine Knuth KRM ST-15/6.0, brand new, year of manufacture 2023. The machine was ordered for a customer who changed their mind, so we are compelled to sell it at a promotional price. Currently, the machine is located at Knuth's headquarters in Wasbek, Germany, and has never been used. If you have any further questions or need more information, please feel free to send us a message or call us. Hsdpeyyd S Rjfx Al Sel

Condition: used, Shielding Gas Welding Machine MIG-O-MAT Type U 405 Serial No. Year of manufacture 1991 Output 400 amps = 60% duty cycle 280 amps = 100% duty cycle Adjustment range 18 steps Torch hose length 5 meters Power supply 380 V, 50 Hz, 32 amp plug - Spot and interval welding function - 2-stroke and 4-stroke welding functions - Wire feed with 2-roller drive - Water-cooled Hjdpfjyy Dfqex Al Sel - Shielding gas pressure regulator - Supplied with 1.2 mm welding wire Dimensions L x W x H: 1300 x 500 x 900 mm Weight approx. 200 kg In good condition

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 6,500 mm, total width: 1,400 mm, total height: 2,500 mm, overall weight: 2,800 kg, input current: 32 A, The Enkong ZM9 is a powerful glass edging machine with 9 spindles, designed for precise grinding and polishing of straight edges and 45° arrises on glass panes. Thanks to its robust construction and advanced control technology, this machine stands out for its high precision, durability, and user-friendly operation. Whether in architectural glass, furniture, or industrial glass production, the ZM9 provides a reliable solution for efficient glass processing and meets all European safety and quality standards (CE compliant). Features: - 9 spindles for grinding and polishing straight edges and 45° arrises - PLC control with touchscreen display: easy adjustment of glass thickness, targeted control of individual motors, pneumatic lifting/lowering of polishing motors Hedpfx Ajyzfimjl Ssl - Infeed and outfeed conveyors with toothed belts for maximum transport accuracy and smooth operation - Sturdy machine body made of solid cast iron – low vibration and long service life - Operation and documentation fully in German - Centralized oil-based lubrication system for low maintenance - Electrical components according to ISO/DIN standards – European standard quality - Glass thickness sensor with automatic safety shutdown in case of incorrect glass thickness - Automatic mode with individual polishing wheel activation/deactivation - Stainless steel water tank with integrated pump - Working direction from right to left - CE compliance ensures maximum safety and conformity to standards Technical Data: Number of spindles: 9 pcs Minimum glass size: 80 × 80 mm Processable glass thickness: 3–25 mm Processing speed: 1.26–6.0 m/min Weight: 2800 kg Installed power: 19.08 kW Dimensions (L × W × H): 6500 × 1400 × 2500 mm Arris (bevel): 45°

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: type plate available, Year of manufacture 1994, modernized by the machine manufacturer KUKA in 2012. The system is equipped with a turning unit, bead punching unit, and a tube feed unit for unloading the welded components. We can adapt this system according to customer requirements. A complete retrofit is also possible. Hsdpsx I Efbjfx Al Sel

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is almost new, coming from a company liquidation. Hsdeyl R U Iopfx Al Sel

Condition: ready for operation (used), A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible. Hodpfxsyypmmj Al Ssl

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 14,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,300 mm, feed rate Y-axis: 1,300 m/min, Manufacturer: Dörries Scharman Machine: Used CNC horizontal boring mill Design: Floor type Model: Heavycut 5.2 Year of manufacture: 1989 Control: Siemens Condition: Used Total machine weight: 219 tons TECHNICAL DETAILS - Spindle taper: ISO 60 - Milling head: ISO 70 - Spindle speed range: 5 – 1000 rpm (minimum 1) - Power rating: 100/90 kW - Cross section: 480 x 480 mm - Traverse speeds, feed for X, Y, V, W axes - Rapid traverse, X, Y, V and W axes - Spindle diameter: 200 mm - Travel distance X-axis: 14,000 mm - Travel distance Y-axis: 6,000 mm - Travel distance Z-axis: 2,500 mm - Travel distance V-axis: 1,300 mm - Feed travel W-axis: 1,300 mm - Max spindle speed: 630 rpm - Spindle diameter: 250 mm - Table load capacity: 80 tons - Table dimensions (L x W): 3,000 x 2,500 mm - Control system: Siemens - Number of axes: 5 (X, Y, Z, V, W) (3+2) - Spindle quill dimensions: 500 x 500 mm - Max spindle speed: 0.8 – 600 rpm - Rotary table type: S80 B Hedpfx Aleyx I Dnj Ssl - Max table load: 80 tons - Hydraulic oil: HL-46 - Lubrication oil: LAN 68 Floor Plates: - 1 piece: 2,500 x 3,000 mm - 4 pieces: 1,800 x 4,000 mm - 1 piece: 2,400 x 7,500 mm - 2 pieces: 2,400 x 8,000 mm

Condition: used, Year of construction: 1991, EDGE SANDING MACHINE LZK 4: Langzauner edge sanding machine LZK Machining and sanding of all types of wood, also in combination with plastics Year of manufacture: 1991 Hedpfsw A Aa Eox Al Ssl Motor power: 3 kW Belt speed: 22 m/sec Belt dimensions: 3000 x 200 mm Table size: 1250 x 350 mm Height adjustment range: 200 mm Extraction port diameter: 110 mm Minimum air speed: 20 m/sec Extraction capacity: 700 m3/h Total weight: 450 kg Total connected load: 3.2 kW Operating voltage: 3 x 380 V 50Hz Required space: 1900 x 900 mm All technical data and information as per brochure

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: Hodpfxevlwh Ds Al Sol - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: new, Year of construction: 2026, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, Hjdpfx Ajizr Rlel Sel 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Machine completely overhauled: - New Glue Jet 301 glue application system (top part 1 mm) - All units inspected - All milling cutters resharpened - All knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrically adjustable feed motor: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy saving function - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 jointing units for panel edge jointing - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit Hsdpfxswka Iij Al Sjl - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper - Pressure unit 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 2013, functionality: fully functional, For sale: Due to changes in our manufacturing division and a production conversion, we are selling a micro plasma welding unit at short notice. * Castolin Micro GAP 50 DC / Micro Plasma Welding Unit * Year of manufacture: 2013 Hsdpfxew A Ilte Al Sjl * Description: For professional use in industrial and craft sectors. * The Micro GAP 50 DC is ideal for welding tasks requiring precision, high-quality layer properties, and low dilution; especially when fully automatic welding is not appropriate or feasible due to small batch sizes or a variety of tasks. The welding units are available with various equipment features. Operation is via push-button selectors and rotary controls on the front display. The Micro GAP 50 DC is designed for manual and semi-automatic welding applications where frequent parameter adjustments are necessary. All settings are clearly shown on the LCD display in plain text. Up to 100 memory slots are available for storing welding parameters. The highly efficient inverter delivers 33 A at 100% duty cycle, which is sufficient for various micro plasma welding tasks. * Condition: Used, very good, little used. Original price (net): €13,995 * - Complete with accessories and documentation (see photos) - Without gas cylinder - Without base cart – this can be purchased optionally for €300. * IMPORTANT: For logistical reasons, we sell only within Europe. The buyer is responsible for removal, loading, and transportation. * "The seller excludes any warranty for the purchased item. The item is sold as-is, without any guarantee for fitness for a specific purpose or freedom from defects. The buyer confirms that the item was inspected before purchase and is satisfied with its condition. The seller assumes no liability for any damages resulting from the use of the item. Any claims by the buyer against the seller are excluded." * Status: 31.03.2026 * Price: €2,900 negotiable / plus VAT Prices are net plus VAT * For any questions or further information, feel free to contact me.

Condition: used, Insertable welding controller in 19" housing, type NPS 8043-1 IQ1, with quality assurance and 50 programs. Solenoid valve voltage: 24 V DC. Complete with MB 260 current measuring strap. ADDITIONAL CONTROLLER MODULES IN STOCK: e.g. 8036 - 8036-S3, 8033, 8043, MPS 200 R1, RATIA 43a, HWS 2202 Profil IQ. Hedpfxjdga Nbj Al Sel

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Hjdpfx Aloyzim As Sjl Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: ready for operation (used), Merkle W 420 AC/DC TIG Insquare welding machine / welding system Technical data can be found in image no. 2 You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid is available. Sale subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Hedpfsu Hg Aqsx Al Ssl Deviations from technical data and errors in the item description may occur and are subject to change.

Condition: good (used), Guillotine Shear HT 200 Capacity: 1.25 mm steel – aluminum and more Cutting length: slightly over 2 m Back gauge Extendable front support Folding Machine KS – Capacity: 1 mm steel – more for aluminum (up to 1.5 mm) Bending length: slightly over 2 m Foot closer Optional: back gauge or Beading device Roller sets and additional rails Sold according to §25a of the German VAT Act Machines are in proper condition and immediately operational Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various rails, back gauges – everything related to sheet metal and steel processing, including folding machines, guillotine shears, drill presses, slip rollers, slitting and profiling machines - accessories (beading devices, round rollers for gutter manufacturing, rear gauge, etc.), as well as other hand tools and spare parts from many top manufacturers. Please feel free to contact me with any questions. You will receive an invoice according to §25a UStG (the VAT is included in the amount – margin scheme taxation). Free loading available – weight approx. 750 kg and 650 kg. Inspection and test run are possible and encouraged after making a telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from motorways A3 and A81. Hsdsyknd Ropfx Al Sol Item numbers: Folding Machine KS and HT 260107 260108

Condition: new, Aceti edge milling machine Art.61 A stable, robust edge milling machine, for milling visible and welded edges. Chamfer adjustment by handwheel and scale. Table hardened, with clamp 500 mm long. Axial adjustment of the milling table for full utilization of ISO / DIN inserts. Suitable for all materials, including plastic, by using different inserts. Standard accessories : -Milling head completely equipped with 10 ISO inserts -Hardened axially adjustable guides -Bevel adjustment by handwheel with locking device -Angle adjustment by circular guide 15-45° - Table design with 4 rubber feet -Table design with 4 rubber feet technical data: Motor 400V 1,1 KW speed 2800 rpm milling table 500 x 100 mm Hodpfoiwxwtox Al Ssl milling cutter 80 mm chamfer 0 - 6 mm angle 15 - 45 weight 35 kg incl. 10 pcs. indexable inserts SPUN 1203

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, roller length: 1,100 mm, working width: 1,030 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, overall weight: 440 kg, total length: 1,750 mm, total width: 650 mm, total height: 1,100 mm, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, 3 rolls plate bending machine DURMA MRB 1030/3mm rolling machine for sale in excellent condition. Hedpfx Aoyzrcgol Ssl manufacturer: Durma MRB-E 1003 year of manufacture 2010 number of rollers 3 upper roller diameter Ø: 90 mm roll length: 1030 mm high tensile steel rollers with SAE 1050 quality certificate - Wire grooves at the ends of the rollers (4/6/9) mm CE certification Cone rolling Upper roller can be opened Manually adjusted rear and lower roller Operation: Foot pedal Motor power: 1.5kw braked gear motor Electrical connection 400 V Cast iron frame construction Machine weight: 440 kg length: 1750 mm width: 650 mm height: 1100 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Vertical belt grinder RB R83 Motor power: 2.2 kW Two belt speeds Hsdpfx Aeyzhlwsl Ssl Abrasive belt rotation to the right and left Belt width: 40 mm Belt length: 1700 mm Year of manufacture: 2008 Weight: 104 kg Technical documentation

Condition: good (used), Year of construction: 2007, functionality: fully functional, 10 cup wheels vertiocal glass edging machine glass thikness : 3 - 30 mm min. glass size : 50 x 50 mm max. glass weight : 1000 kg working height : 812 mm Hsdpfx Asyhpqajl Sjl total power : 16,3 Kw water tank capacity : 422 L working speed : 0,5 - 5,5 m/min. weight : 2890 kg The machine has worked with a flocculant . 62000 working meters