Used Pullmax Plate Edge Welding Slanting Machine for sale (72,842)

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Klodpfjzd Rmgex Anwou Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, sheet width 1050 mm plate thickness 2,5 bei 400N/mm² mm roll diameter 90 mm Weight ca. 490 kg Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Bending roll adjustment via handwheel; suitable for conical bending Ksdpfezfayfsx Anwjlu Emergency stop cord The machine comes from a training workshop and is in very good condition

Condition: refurbished (used), functionality: fully functional, welding current (max.): 400 A, Equipment: type plate available, ESS EcoMag 414 – Water-cooled MIG/MAG Note: This is a Trade-in. Refurbished, tested, serviced, and ready for immediate use. Specifications: 40-400 AMP 380 Volt Kledpfxoywatre Anwou Water-cooled 2/4 Step / 4 Roller drive Steplessly adjustable Including PRO5000 Welding torch, earth work cable with clamp, gas cable, and +- 5 meter interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: A500P, type of input current: three-phase, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: water, hose package length: 8,000 mm, welding current at 60% duty cycle: 500 A, welding current (min.): 2 A, welding current (max.): 500 A, Demo OTC A500P – Water-cooled TIG ACDC Welding Machine 24-month warranty Demo Model, Ready for immediate use for manual welding or robotics. Suitable for: Robotic welding, aluminium, steel and stainless steel production welding, heavy construction, machine building. Not suitable for: On location, hobby. Specifications: 2-500A 60% ED 500A 380 Volt AC TIG / DC TIG / AC-DC TIG Pulse Synergistically adjustable Water-cooled 2/4 Step High frequency Pre gas / Post Gas Start current / end current Up slope / Down slope AC Balance / AC Frequency Pulse Frequency Spot welding Programme Memory Electrode option Includes: PRO30 8-metre welding torch, ground cable, and gas hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Kedpfx Aneyhdxxjwjlu Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Year of construction: 2001, Offer 26161 Kodpozfim Isfx Anwjlu Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA - Adjustable reach: 140 - 500 mm - Welding parameters: - Steel sheet: 6 + 6 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg - Including: - Welding control system DALEX MPS 200 - Foot-operated switch

Condition: good (used), Year of construction: 2001, machine/vehicle number: ZAC-N-14354, Offer 26162 Technical data: - Rated power at 50% duty cycle 80 kVA - Max. welding power 211 kVA - Outreach 350 mm - Welding parameters: - Steel sheet 8 + 8 mm - Brass sheet 4 + 4 mm - Aluminum sheet 4 + 4 mm - Electrode force, adjustable 120 - 720 daN - Required air pressure 6 - 10 bar - Cooling water flow rate 12 l/min - Control system DALEX MPS 8043-1 for: - Pre-heating time; current time; - Post-heating + open-arc time, as well as - Rise time + pulse + pause time - Power supply 400 V - Space requirement approx. W 950 x H 2100 x D 1500 mm - Weight approx. 600 kg - Including: Kjdpfxozfigzo Anwolu - Complete electrical and pneumatic system - Foot-operated switch

Condition: good (used), Year of construction: 1997, functionality: fully functional, Stürtz horizontal 4-head welding machine for welding plastic components. Welding dimensions: 2600 x 3000 mm Weld bead height limit: 2.0 mm (adjustable to 0.2 mm) Kljdpfxszfky Ne Anwou Suitable for welding entrance doors. Penetration depth: 6.0 mm Operation via PC Jetter (Dell PC conversion kit)

Condition: good (used), Year of construction: 1994, Oscillation ja ja / nein Kjdjzfqkzspfx Anwslu ja ja/nein ja ja/nein tiltable up to 30 Grad Motor output 2,8 kW Table dimensions 850 x 300 mm sanding width 150 mm Weight 330 kg

Condition: used, Year of construction: 2007, with edge gluing: workpiece thickness: 8 - 50 mm, edge thickness: 0.4 - 3 mm, fixed lengths: max. 3 x 45 mm, feed rate: 11 m/min, connection value: 10.5 kW, compressed air: 6 bar, weight: approx. 1250 kg, machine length: 3920 mm. Kledpfxjy Tpz Dj Anweu Storage location: Supplier.

Condition: used, Year of construction: 1993, Working widths: 150 or 200 mm. Table on the surface grinding side (can be tilted downwards from 0 to 45°) and on the veneer grinding side: 280 x 1000 mm. Table in front of the belt tension roller: 400 x 300 mm. Connection power: 3 kW. Oscillation stroke: approx. 15 mm. Dust extraction connection diameter: 150 mm. Weight: approx. 400 kg. Kjdpfx Asy Tpzwsnwjlu Storage location: Supplier.

Year of construction: 2020, condition: ready for operation (used), A handheld fiber laser welding machine Sitolaser with a Reycus laser source is available. Laser power: 1000W, cooling: water, welding capacity steel/copper/aluminum: 4mm/2mm/2mm, min. sheet thickness: 0.2mm, wavelength: 1080nm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1200mm, weight: approx. 250kg. Including various copper nozzles, spare lenses and heavy-duty casters for mobility. The item is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Kledpfx Anjzfaarowou

Condition: excellent (used), Year of construction: 2014, 4-axis mitre grinding machine with water tank and pump. Width: 8300 mm Kjdpfx Anszd Sm Uswjlu Height: 3260 mm Depth: 1000 mm Condition: very good, second-hand

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Kledpjzcpixjfx Anwju Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: good (used), *DESCRIPTION* Professional ARO AROMASTER II welding set, year 1997. Medium-frequency spot welding unit, 1000Hz, delivered complete with its 2 original tools. ARO Château-du-Loir brand = a global reference in resistance welding. Robust equipment, spare parts always available. *LOT COMPOSITION* 1. *AROMASTER II Generator* Code ZU182000 - No. 9713221A523 - Year 1997 400V Three-phase 50Hz - 20.7 kVA at 100% / 29.3 kVA max Integrated water cooling - NF A 82-020 standard Klsdpfx Aszczw Isnwsu 2. *ARO YB200450 X-Gun* No. 9712211B669 - Year 1997 Water-cooled - 450mm copper arms - Force ∼300 daN 3. *ARO YB200550 Dent Puller Gun* No. 9712211B640 - Year 1997 For welding pull studs Ø2.5mm *TECHNICAL SPECIFICATIONS* Brand: ARO - Made in France Technology: Medium frequency 1000 Hz Power supply: 400V Three-phase 32A minimum Welding current: ~10,000 A Weldable thicknesses: Steel 0.6 to 2.0 + 2.0 mm Control: Digital - Time/intensity adjustment Cooling: Water - Integrated unit Generator weight: Approximately 110 kg - On castors *CONDITION & WARRANTY* Set in good overall working condition. Tested in the Gortina workshop: cycles with gun and puller OK, pneumatic pressure OK, no water leaks, thyristors OK. Original ARO yellow paint. Cables and wiring in good condition. *ADVANTAGES* 1. *2-in-1 Set*: Spot welding + inertia dent pulling. One generator only. 2. *ARO Reliability*: Industrial construction. National after-sales service. 3. *Economy*: Equivalent new cost 2026 > €15,000 (excluding VAT). 4. *Ready for use*: Generator + gun + puller, original 1997. *APPLICATIONS* Traditional automotive bodywork, vehicles before 2010, vans, 4x4s, restoration of old vehicles. Dent pulling without paint. Training centers.

Condition: good (used), Year of construction: 2000, *TECHNICAL SPECIFICATIONS* Make / Model ARO MC30CSC Year 2000 Serial No. 0001122B122 Type Fixed spot welding machine with swan neck Power Supply 400V Three-phase 50Hz - 50A Power 21 kVA at 100% / 78 kVA max Max. Welding Current 19,000 A Clamping Force 358 daN 358 kg Swan Neck Depth 550 mm Arm Spacing 174 to 489 mm Cooling Water 5 L/min - 6 bar Control ARO Micro 2X16 III digital Multi-parameter programs Weight 270 kg Standards CE - NF A 82-020 - Made in France *SUPPLIED EQUIPMENT* - Complete machine on chassis - 1 pair of mounted, water-cooled copper arms Kedpfxszczwhe Anwjlu - Micro 2X16 III digital control with key - ARO operating manual *CONDITION* Machine in excellent working condition. Tested and inspected in the workshop: welding cycles OK, pressure build-up OK, no water leaks, thyristors OK. Original yellow ARO paint. Ready for production. *ADVANTAGES* 1. *Power*: 78 kVA for welding steel up to 3+3 mm and stainless steel 2+2 mm. 2. *ARO Reliability*: Leading brand, spare parts always available. 3. *Modern Control*: Micro 2X16 for precise adjustment of time/intensity/force. 4. *Versatile*: 550mm swan neck for large parts. *APPLICATIONS* Manufacturing of grids, baskets, metal frames, assembly of industrial sheet metal, locksmithing, industrial bodywork.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, total length: 4,150 mm, overall weight: 1,350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Brandt-Homag KDF 220 Highflex edge banding machine, year of manufacture 2012 from a small carpentry business Last inspection: March 20, 2026 Type: KDF 220 Machine number: 0-261-20-6136 Wiring diagram number: 0-261-20-6136 Year of manufacture: 2012 Supply voltage: 400Y/230 Units controlled via the display Gluing unit: 2 x 2.2 kW Trimming saw unit: 2 x 0.18 kW Flush trimming unit: 2 x 0.27 kW Profiling milling unit: 2 x 0.35 kW WD 40 -additional function: structural base Kledpfx Aezdb Ivenwou Radius draw knife Straight draw knife Edge thickness: 0.4 - 6 mm Fsbq Uvmsyy S Ade Rnjph Workpiece thickness: 8-60 mm Feed rate: 11 m/min Total power: 16 kW Length: 4150 mm If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, This ideal welding machine, type: AS 8 M, will be auctioned off in our industrial auction / machine auction organized by Kusch+Co GmbH – including spray booths, milling and drilling machines, industrial sewing machines, grinding machines, workshop and office equipment – online. Kedpfozfibrjx Anwslu You can find this and many other items on our platform.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 3,000 mm, type of cooling: air, hose package length: 5,000 mm, welding current (min.): 40 A, welding current (max.): 250 A, Rowac KGL 250-2 – Gas-cooled MIG/MAG Transformer Welding Machine Refurbished, serviced, tested, and ready for immediate use. Klodpfxezdapre Anweu Please note: This is a trade-in. Specifications: 250 AMP 380 Volt 2/4 cycle 10-step adjustable Spot welding Interval welding Includes: 3-metre welding torch, earth cable with clamp, gas hose, and 5-metre interconnecting cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. Kljdoyga T Nepfx Anwju The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. Ksdpfxev T Ttfe Anwslu - 1.1kw engine. - We will help you organize a profitable shipping company or courier.

Condition: new, Year of construction: 2025, throat depth: 500 mm, – Capacity 35 kVA – Pneumatic – Throat depth 500 mm Klsdpfx Anex N Nfuoweu – PX1700ECO control – Documentation – 400V

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Kljdpoy Dd Igjfx Anweu Location: Nattheim

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Colour: Grey Empty weight: 566 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) - Transport weight [kg]: 566kg - Transport packages [pcs.]: 1 Kledpjywlfyefx Anwju Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1991, 3-roll plate bending machine Plate width: 3000 mm Ksdpszd Dpnjfx Anwelu Plate thickness: 20 mm Pre-bending: 16 mm Top roll diameter: 380 mm Side roll diameter: 340 mm

Condition: good (used), travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Klsdpfx Anjzd Dmgjwju Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm