Used Pullmax X93 76000-13 for sale (10,078)

Condition: used, Hydraulic scissor lift table WEIDMANN, type E5/13-1 Manufacturer's No. 30403339, Year of manufacture 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift height max. 1280 mm Overall height - table in lowered position 290 mm Overall height - table in raised position max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Pedpjhlnznefx Aahsra Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Rotary switch on the hydraulic unit for raising and lowering - Lowering speed can be adjusted continuously via a throttle valve - 1 lifting cylinder - Hydraulic unit, year of manufacture 2007, with tank positioned beside - Safety guard frame with limit switches Weight 660 kg Good condition

Condition: new, Drill bit grinding machine Manufacturer: MOTOM Model: BSM 13 DUO Grinding range: 2-13 mm Paint finish: gray Application areas: Grinding conical shanks Pointing Back grinding Scope of delivery: CBN grinding wheel for HSS tools Prsdpfx Aaoguadnohja Collet set from 2-13 mm, increasing in steps of 1.0 Plexiglas protective shield

Condition: new, empty load weight: 560 kg, maximum load weight: 2,040 kg, overall weight: 2,600 kg, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-HK2715-26-13 2600kg 276x150x30cm rear tipper with PUMPless" Rear tipper from the manufacturer Unsinn. Made in Germany! The WEB-HK2715-26-13 high-loader rear tipper can be easily loaded from the side and rear with a forklift or by hand thanks to the foldable and removable aluminum side walls. The load is tipped back out using manual hydraulics. A welded subframe makes the tipping trailer very stable. Prodpeqv Ec Hjfx Aahea The car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, and a very stable V-drawbar. Trailer accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, net and supports are also available for an additional charge.

Condition: used, Year of construction: 2002, spindle diameter 130 mm x-travel 3500 mm y-travel 2500 mm z-axis 1250 mm W-axis (spindle longitudinal) 800 mm ISO 50 P.D.B 1800x2500 mm 12 t 3000 Hertz 400 total power requirement 37 kW Pjdpeyqvqrefx Aahsra ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. Podpfx Ajyv I Smjahjra - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: used, empty load weight: 6,380 kg, maximum load weight: 32,620 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: white, Year of construction: 2026, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 69857 Benalu, BRD3 * Year of manufacture: 2026 * ABS, Anti-lock Braking System * EBS, electronic brake system * Lift axle * Spare wheel carrier with spare tire * 2x7-pole connector * 15-pole connector * Storage box / toolbox * Platform * Roll tarp * Inspections: MOT / emissions test valid until 06.2027 * Suspension: Air suspension * Gross vehicle weight: 39,000 kg * Tare weight: 6,380 kg * Payload: 32,620 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 100% -- 100% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 100% -- 100% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 100% -- 100% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Mega, steel round hopper * Day license * Capacity: 25 m³ * Hardox lift axle * 1250mm saddle height * Shuttle valve * Folding underrun protection * SAF axles, chassis length 7500mm * SAF full-load supports * Floor thickness: 5mm * Dunlop tires * Hyva 250 bar tipping cylinder * Toolbox, control panel * COC documents Disclaimer: Pedpfx Aezukabsahera Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: ELGO P40T 5.7”, working width: 3,100 mm, stroke rate (min.): 14 1/min, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, power: 22 kW (29.91 HP), Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, HGM B13-3100 – 13 mm x 3100 mm Hydraulic Guillotine Shear The HGM B13-3100 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for metal processing, steel construction, machine manufacturing, and general sheet metal processing applications. It features a 13 mm sheet metal cutting capacity and a 3100 mm cutting length. Thanks to the ELGO P40T touch screen NC control unit, motorized back gauge system, Rexroth hydraulic system, and double-speed cutting technology, it offers precise and efficient cutting. Standard Features Throat Depth: 250 mm Cutting Length: 3100 mm Cutting Angle: 2.1° Prsdpfx Aaszbqyijhsa Distance Between Columns: 3340 mm Cutting Capacity: 13 mm ELGO P40T 5.7” Touch Screen NC Control Unit 5.7” TFT touch screen Manual operation mode Single-piece processing Program memory Up to 2A digital outputs Automatic blade gap, cutting angle, and pressure adjustment calculation based on material Automatic cutting program Back sheet support system RTS (Return To Sender) function Manual Blade Gap Adjustment System Programmable Back Gauge Retraction System Automatic lifting for parts larger than 1000 mm CRONOSSTECH X-Axis Motorized NC Controlled Back Gauge X-axis travel distance: 1000 mm Speed: 150 mm/sec Accuracy: ±0.05 mm Steel body Hardened ball screw spindle Front Support Arms 1000 mm length Ruler T-slot Retractable stopper Retractable Front Finger Guard System (1000 mm) Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) CRONOSSTECH Premium Front and Rear Guard Rexroth Hydraulic System Double-Speed Cutting System Energy-Saving Standby Mode Optional Features Automatic Blade Gap Adjustment System (ELGO P40T) Pneumatic Sheet Support System (Type 1 - Double Position) 1250 mm or 1500 mm X-axis back gauge 1500 / 2000 / 3000 mm front support arms Full-length retractable front guard system Technical Specifications Cutting Capacity (450 N/mm²): 13 mm Cutting Capacity (700 N/mm²): 8 mm Cutting Length: 3100 mm Cutting Angle: 2.1° Number of Pressure Cylinders: 14 Cutting Speed / Fast Mode: 9 / 14 hpm Distance Between Columns: 3340 mm Table Height: 880 mm Table Width: 620 mm Throat Depth: 250 mm Back Gauge Travel (X-Axis): 1000 mm Machine Length: 4860 mm Machine Width: 3585 mm Machine Height: 2300 mm Oil Tank Capacity: 265 L Motor Power: 22 kW Machine Weight: 11.5 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: excellent (used), Year of construction: 2013, operating hours: 623 h, lifting height: 11,700 mm, fuel type: electric, General information Year of manufacture: 2013 Technical information Drive: Wheel GVW: 3.221 kg Dimensions (LxBxH): 248 x 119 x 254 cm Functional Lifting capacity: 350 kg Working height: 1.370 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Additional information Please contact Ton for more information Manufacturer: Genie Type: GS4047 Year of manufacturing: 2014 Weight: 3.221 KG Hourmeter: 623 Drive: Elektrisch Product number: 26038 Platform height: 11,70 meter Working height: 13,70 meter Platform measurements: 226x119 cm Extendable platform: 91 cm Total measurements LxWxH: 248x119x254 cm Max. platform load: 350 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 6.250,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Prsdjzunupepfx Aahoa Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: new, operating pressure: 130 bar, high-pressure hose length: 10,000 mm, input voltage: 230 V, overall weight: 69 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 5/13 U ANNIVERSARY EDITION WASHER: Model: HDS 5/13 U ANNIVERSARY EDITION Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW (waster packed in factory) Type: Hot water Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 500 Working pressure (bar/MPa): 125 / 12.5 Maximum pressure (bar/MPa): 150 / 15 Maximum temperature (°C): 80 Fuel consumption (kg/h): 3.1 Connection power (kW): 2.6 Pedpfev Tw Sfjx Aahora Power cable (m): 5 Weight with packaging (kg): 69 Dimensions (L x W x H) (mm): 618 × 618 × 994 EQUIPMENT OF THE KARCHER HDS 5/13 U ANNIVERSARY EDITION WASHER: Pressure gun: Karcher Professional !EasyForce High pressure hose: Karcher Professional 10M, DN6, 250BAR - !EasyLock Spray lance: Karcher Professional 840 mm !EasyLock Nozzle: Karcher Professional three-stage nozzle (0°/25°/40°) !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort. Due to its small size, the device can work wherever it is difficult to reach, or where it is often necessary to work in different places. Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. EASY!Force technology reduces the force needed to hold the gun trigger to zero. KARCHER 90th anniversary version! Automatic pressure reduction after switching off the device The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed.

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Predpfxoy Ryrnj Aahja Specifications: Capacity: 13,400 L

Condition: ready for operation (used), Heidenhain EQN 1325.020-2048 G3 rotary encoder, ID 538 234-01, serial number 19900741A, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Prjdpfxozuu Dwo Aahoa

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. Prsdpszu Aibofx Aahoa It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: ready for operation (used), Siemens CPU315T-2 DP 6ES7315-6TH13-0AB0 Simatic S7 E-Version 1, factory-refurbished by Siemens as per orange label, scope of delivery as shown in photos. Psdpfx Aezu Et Asahera

Condition: ready for operation (used), Siemens Sinumerik 6FC5312-0DA00-0AA1 control panel front, serial number: T-XD2021378, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Prjdpfx Ajzu Ezyjahsa

Condition: ready for operation (used), Siemens SIMODRIVE 6SN1124-1AA00-0BA1 power module Version: A, SN: T-R32008131, used, in good condition, 100% functional, delivery as per photos. Predpfszu Exfox Aahja

Condition: ready for operation (used), Siemens SINUMERIK 6FC3988-7AH20 monitor, version: B, SN: T-P42032513, used, in good condition, 100% functional, delivery scope as per photos. Prjdpfx Aaszu Ezmjhja

Condition: ready for operation (used), Siemens C79458-L2317-A1 Sicomp SN C3 051344, used, 100% functional Pjdpfszu Epwsx Aahsra

Condition: ready for operation (used), Trumpf Laser TruMark 3000 marking laser controller, SN: L0131E1357, with 6m power cable and 2 keys, used, in good condition, 100% operational, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Pedpfjzu Hmdex Aahora

Condition: ready for operation (used), Turck LT300M-Q21-LU0X3-H1141 linear position sensor 300 mm SN:130460B014908, used, good condition, 100% functional, scope of delivery as per photos Psdpjzu Hmwefx Aahjra

Condition: new, empty load weight: 590 kg, maximum load weight: 2,010 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,010 mm, working width: 1,570 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. solid steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,600 kg - Unladen weight: 590 kg - Payload: 2,010 kg - Interior dimensions: 276 x 150 x 30 cm (L x W x H) - Overall exterior dimensions: 420 x 157 x 101 cm (L x W x H) - Loading sill height: 73 cm - Tires: 165R13C steel rims - Brakes: yes - Support wheel: yes, automatic - 100km/h: for an extra charge - Incl. vehicle documents: incl. vehicle documents. Vehicle superstructure: - Brake: yes - Number of axles: 2 - Floor: solid steel floor, 3mm solidly reinforced - Drop sides: anodized aluminium, double-walled double-walled - Dropside height: 30 cm - Dropside folding: 4-sided - Dropside removable: 4-sided - Dropside hinges: 3 side / 2 front + rear, bolted - Corner stanchions removable: Yes, all removable - Locks: Long lever locks, internal - Swivel dropside: No - Number of pallet spaces: 3 - Multifunctional vehicle:No - Tipping / lowering function:Without - Hydraulic pump:Cordless screwdriver pump - Number of stages cylinder:3-stage - Tipping angle (R/S):45 - Battery charging function:- - Overrun device/brake: ALKO - Frame/chassis:Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Steel mudguards - Superstructures / attachments: Optional, attachable - Ramp shaft: No - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, can be retrofitted - Lashing eyes: 6 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents Accessories can be retrofitted - please enquire: - Unique, torsion-resistant side member chassis for safe driving characteristics - Anodized double-walled aluminium drop sides - All drop sides can be folded and removed - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, grid attachment, drop side attachments or front wall extension - Recessed long lever locks - Full steel floor 3mm hot-dip galvanized ? extremely robust - drawbar and frame hollow profile construction welded and completely hot-dip galvanized - many cross beams therefore high point load - all cross and longitudinal beams rest on the floor - 6 lashing troughs foldable, mounted recessed in the floor frame profile (600DaN/kg) - 4 lashing eyes under the loading area - solid 3-stage hydraulic cylinder - hydraulic unit Pumpless- tipping with pump driven by cordless screwdriver - maintenance-free rubber spring axles from ALKO - automatic reverse drive - automatic tipping with pump driven by cordless screwdriver - maintenance-free rubber spring axles from ALKO - automatic reverse drive - automatic tipping with pump driven by cordless screwdriverALKO overrun device and parking brake - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - support wheel in the middle with clamp New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - Pjdpfju Ht Umjx Aahora

Condition: good (used), Year of construction: 2007, Workpiece height – max. 100 mm Workpiece width – max. 1300 mm Feed rate 0.4 – 2.6 m/min Pedpfxozwma Ns Aahsra Number of spindles 6 pcs Spindle length 6 x 350 mm Total power consumption 7.5 kW Machine weight approx. 2.3 t Space requirement approx. 2.07 x 2.3 x 2.21 m Additional information Includes a circulating conveyor system for workpiece carriers and an extraction/filtration system.

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 130 mm gear width: 25 mm module max. : 3 module min. : 0,5 control: Siemens 840D work-spindle diameter: 85 mm strokes - infinitely variable: 500 - 2500 Hub/min stroke: 30 mm total power requirement: 48 kVA weight of the machine ca.: 11,5 t space requirements approx. LxWxH: 4,7 x 3,0 x 3,3 m Equipment: Prodsvi Ninspfx Aahea -Counterholder with tip -chip conveyor -hydraulically operated counterholder arm and linear guides i.D. *

Condition: good (used), mileage: 538,408 km, power: 368 kW (500.34 HP), first registration: 04/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,200 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2023, Equipment: ABS, AdBlue, central locking, cruise control, electric window regulation, navigation system, onboard computer, retarder, soot filter, spoiler, = Additional Options and Accessories = - Closed cab - Cab - Particle filter - Sleeper cab = Notes = Volvo FH13.500 Globetrotter XL 6x2 - Retarder - 3.20 WB - Full air MY: 20-4-2023 KM: 20-04-2023 YV2RT40C7PA325061 XL cab Retarder Full air suspension 3.20 wheelbase Navigation system Fridge Coffee machine Etc. Prodjzwl Rtepfx Aahsa = Further Information = Technical Information Number of cylinders: 6 Transmission Gearbox: I-Shift, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8500 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Rear axle 2: Tire size: 315/60R22.5; Twin tires; Lift axle; Max. axle load: 7500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40% Weights Unladen weight: 10,181 kg Payload: 17,319 kg GVW: 27,500 kg Condition Technical condition: good Optical condition: good

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2017, suspension: air, tire size: 445/45R19.5, color: silver, Year of construction: 2017, Equipment: tail-lift, = Additional Options and Accessories = - Air suspension = Notes = Pezzaioli 3/4 deck livestock trailer - 134.8m2 - Water & Ventilation - Lifting roof Year of Manufacture: 05-10-2017 ZFJSBA62UHM006187 3/4 deck livestock trailer Water & Ventilation Lifting roof 134.8m2 1: 33.7 2: 33.7 3: 33.7 4: 33.7 Weight: 12,700 KG Total: 39,000 KG = Additional Information = Prsdpszwlhrjfx Aahsa Axle configuration Tire size: 445/45R19.5 Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 9000 kg Rear axle 2: Twin tires; Max. axle load: 9000 kg Rear axle 3: Twin tires; Max. axle load: 9000 kg Weights Unladen weight: 12,700 kg Payload: 26,300 kg GVW: 39,000 kg Condition Technical condition: good Optical condition: good

Condition: used, mileage: 197,958 km, power: 95 kW (129.16 HP), first registration: 01/2013, overall weight: 5,300 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2012, total length: 6,400 mm, total width: 2,100 mm, total height: 2,800 mm, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: 1 DIN slot in the front under the headliner, trailer socket 13-pole, audio system Audio 20 (radio with CD player), exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), turn signals on the front sides, roof console with reading light on driver/passenger side, entry lights, generator 220 A, additional main key, folding cover for storage compartment, steering wheel (steering column mechanically adjustable), steering wheel with multifunction including trip computer, configurable special module, spare wheel with Super-Single tire (235/65 R16), reversing warning system (audible warning signal outside), interior rearview mirror, rear wall with window, mud flaps in front, seat cover/upholstery: artificial leather (cab), seats in the cab: comfort suspension seat, driver's side, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay with additional battery, rear wall trim, reinforced front axle, preparation for tachograph, thermal insulation in the driver's cab, auxiliary heater (hot water) Additional equipment: Adaptive brake light, driver's airbag, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake system with ABS+ASR, headlining in the cab, lockable glove compartment, body/structure: standard double-cab pick-up, fuel tank: main tank 75 liters, headlight range control, engine 2.1 liters - 95 kW CDI CAT (2143 ccm), wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver's side), service interval indicator Assyst, heat-insulating glazing, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle Additional equipment: central locking * Auxiliary heater * Radio * Snow plow mounting plate with hydraulic quick coupler * Control for snow plow * Elevated headlights * Trailer hitch * Turning assistant * Rotating beacon +++Signs of wear and tear due to use+++Owned by a municipality since new+++ Pjdpfxozwn A Es Aahjra