Used Purtec Sms-K for sale (35,891)

Condition: used, Year of construction: 2018, Magnetite SM 1050 iron gray / Hfedjt A T Ahepfx Ahzei

Condition: new, For sale, a pipe straightener from the German manufacturer SMS MEER, the machine is brand new, it was dismantled from a plant that collapsed during the delivery and assembly of the machine. The machine has two Siemens 200 kW drive motors each. Straightening rollers have a length of 460mm, diameter on the sides 400mm, diameter in the middle 300mm. Hfjdpfx Ahsm H Unhjzji The weight of the machine itself is 44 tons, the total weight is 55 tons. I can send a lot of photos before dismentling.

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Hfodjghrguspfx Ahzsi Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Hfsdpfxjxa H Ewj Ahzei (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay. Hsdpjwzmcbjfx Ahzsfi

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) Hfsdpfxjwfgbrs Ahzsi ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Hfsdpfx Ajxa Hzxjhzsi Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Year of construction: 2025, total height: 982 mm, total length: 4,000 mm, total width: 1,100 mm, volume flow: 18,000 m³/h, warranty duration: 12 months, Extraction wall with 18,000 m3/h Max. power consumption 5 kW/h Electric motor 4 kW Air unit 18,000 m3/h Nicotra ADH 400 Hedpfxewz Ic No Ahzefi The full description can be found in the attachment to this listing.

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Hedpfxjxa Hx Re Ahzofi Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,400 mm, total height: 2,210 mm, total width: 1,505 mm, type of input current: three-phase, warranty duration: 24 months, temperature: 250 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, Equipment: emergency stop, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ PEF-2.5 ELECTRIC POWDER FIRING OVEN WIDTH (INTERIOR): 1,505 mm HEIGHT: 1,800 mm (from the air duct) LENGTH (INTERIOR): 2,500 mm ➢ The thermoblock unit measures 785 x 1,800 x 2,210 mm. The heating capacity is 30 kW/h. A circulating fan is 1.5 kW/h (1 pc.), and an exhaust fan is 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails are manufactured for trolleys in the dimensions indicated on the floor panels. ➢ Specially designed air duct ensures uniform air distribution in the curing oven. ➢ The electrical switchgear is made of Siemens and Schineider. This curing oven does not have a PLC system. PLC is available as an option. ➢ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and light signal is emitted by the buzzer. ➢ Additionally, a product transport cart with cast wheels is located inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200mm (dimensions including fan) ➢ Teflon filters: 4 pcs. ➢ Filter suction fans: 4 kW x 1 pc. (6,000 m3/h – 200 mm SS) ➢ 36 W LED lighting x 1 pc. ➢ Bottom drawer x 1 pc. ➢ Control panel for controlling air intake and pressure blasting ➢ DELTA frequency converter ➢ Heavy-duty rollers under the paint booth. ➢ An additional filter is located at the fan outlet. ♨️ Ramp heating mode (optional) Precisely control temperature progression and dwell times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! Hedpfswdtfuex Ahzjfi _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ Hsdpfewfhu Hjx Ahzsfi ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Year of construction: 2019, condition: excellent (used), load capacity : max 360 kg Extendable : 700 mm x 1400 mm Angle of rotation around longitudinal pivot : 360` Hjdpfx Ajpu D Dzohzjfi

Condition: new, functionality: fully functional, fuel type: gasoline, fuel tank capacity: 10 l, color: yellow, operation weight: 500 kg, lifting power: 350 kg/m, lifting height: 1,600 mm, Year of construction: 2025, Equipment: all wheel drive, The KINGWAY HERACLES H130 is a surprisingly compact machine with great capabilities, equipped with a hydrostatic 3WD drive. Thanks to its compact dimensions and a turning radius of just 993 mm, it boasts exceptional maneuverability, allowing work in narrow passages. The machine features a mounting plate compatible with "Avant" and "Multione" attachments, further increasing its versatility. With a maximum lifting capacity of 350 kg and a tipping load of 400 kg, it is ideal for agriculture, construction, as well as larger private estates. Its low operating weight of 500 kg and easy transportability make it the perfect solution for users seeking a mobile and versatile machine. The KINGWAY HERACLES H130 is perfectly suited for agricultural enterprises, construction companies, electrical and plumbing businesses, as well as renovation firms and other service providers. We also guarantee custom after-sales service. The machines are manufactured under European technicians’ supervision, based on a robust design that enables operation under all conditions. TECHNICAL DATA: Model: H130 Operating weight: 500 kg Lifting height: 1600 mm Engine: PETROL Fuel type: Petrol Hfsdpfx Aewifvcohzji Cylinders: 2 Displacement: 740 cm³ Emission standard: EU Stage V & EPA Tier 4 Final Max. torque: 47 Nm at 2500 rpm Cooling system: Air-cooled Operating voltage: 12 V Battery: 20 Ah Max. tipping load: 400 kg Max. lifting capacity: 350 kg Operator’s cab: None Travel speed: 0~15 km/h Steering angle: 0~360° Turning radius (inside/outside): 0/993 mm Standard tires: 18×9.50-8 Fuel tank: 10 l Hydraulic oil tank: 10 l Hydraulic flow: 29 l/min Hydraulic pressure: 160 bar Transmission type: Hydrostatic Length: 1854 mm Width: 993 mm Bucket width: 1000 mm Height: 1304 mm THE MACHINE IS FITTED WITH DIFFERENT TIRES THAN SHOWN IN THE PICTURES. THE CURRENT TIRES ARE DISPLAYED IN THE LAST TWO PHOTOS. PRICE: Net: €6,600 Gross: €7,854 WARRANTY: Every machine comes with a 12-month warranty which can be extended for a further year. After the warranty period, we guarantee our customers access to all spare parts. SERVICE: We have our own mobile service, which caters to all our customers inside and outside Germany. KINGWAY is the leading and largest importer of construction and agricultural machinery in Europe. We have been active in the European market for 25 years and import and sell approximately 3,000 to 4,000 machines annually, earning the trust of many customers.

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Hsdpfsw Ufplsx Ahzofi Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 4,500 kg, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, Year of construction: 2025, FARMER 815T Hsdpfx Ahsxp Ibxjzefi The modern telescopic loader FARMER 815T – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, and service providers in similar sectors. We also guarantee customer support even after the warranty period has expired. The loaders are manufactured under supervision of European technicians and based on European technology. The machine is built on a stable chassis and can perform reliably under all conditions. The comfortable, glazed cab ensures safe and pleasant working conditions. TECHNICAL DATA: Model: FARMER 815T Total weight: 3000 kg Overall dimensions (L×W×H): 4100×1520×2450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1500 kg Dump height: 2200–3000 mm Lifting height: 3450 mm Discharge height (maximum reach when dumping): 700 mm Wheelbase: 2100 mm Track width: 1405 mm Rear chassis articulation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 HP Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated output: 18.8 kW Rated speed: 2400 rpm Minimum fuel consumption: ≤1800 g/kW·h HYDRAULIC SYSTEM: Working pressure: 18 MPa Boom lifting time: 4 s Total boom lift/lower time: 7 s Fuel tank capacity: 55 l Hydraulic tank capacity: 65 l Automatic leveling: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Fixed-axle, constant mesh gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKE SYSTEM: Service brake: Foot-operated, drum brake (mechanical) Parking brake: Hand-operated, disc brake (mechanical) TYRES: Standard tyres: 31×15.5-15 Optional tyres: 19.0/45-17/MP Tyre pressure front: 320 kPa Tyre pressure rear: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the exclusive point-of-sale distributor for the Kingway brand in Germany. Here, you can inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the Kingway headquarters in Germany. We have a huge selection in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 STOCK: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, color: red, overall weight: 7,500 kg, operation weight: 5,500 kg, maximum load weight: 2,000 kg, Year of construction: 2025, The 825T model is the ideal machine for the most demanding construction, electrical, hydraulic, renovation companies, and service providers in related industries. It is built on a robust frame and can be operated under any conditions. The comfortable, glazed cabin ensures safe and pleasant operation. The machine boasts an impressive lifting height of 4.8 meters! PERFORMANCE: Rated load capacity: 2,000 kg Total weight: 5,500 kg Rated bucket capacity: 1.2 m³ Maximum traction force: ≥34 kN Maximum breakout force: ≥51 kN Maximum climbing ability: 30° Maximum dumping height: 4,006 mm Maximum dumping reach: 854 mm Overall dimensions (L×W×H): 6,200 × 2,100 × 2,580 mm Minimum turning radius: 4,043 mm ENGINE: Standard model: YUNEI DEF20CAF4 Type: Vertical, inline engine, water-cooled, 4-stroke diesel Number of cylinders – Bore/Stroke: 4 — 100 × 125 mm Rated power: 55 kW Max. torque: 250 N·m Minimum specific fuel consumption: ≤243 g/kW·h DRIVELINE: Torque converter: YJ1—26501 Transmission: Intermediate shaft, power-shift type Gear range: 2 forward, 2 reverse Maximum speed: 20 km/h Drive axles: Main reduction – spiral bevel, single-stage Reduction type: Planetary, single-stage Wheelbase: 2,551 mm Track width: 1,650 mm Ground clearance: 310 mm HYDRAULIC SYSTEM: Operating pressure: 16 MPa Arm lift time: 4.8 s ± 0.2 s Full cycle: 9.2 s ± 0.5 s Fuel tank volume: 80 L Automatic leveling function: Yes BRAKE SYSTEM: Service brake: Disc brakes on all four wheels Parking brake: Hand brake TYRES: Type and size: 16/70-20 Front tire pressure: 0.22 MPa Rear tire pressure: 0.22 MPa Hfsdpfx Ahsxcv Hiszei PRICE: €30,500 net €36,295 gross WARRANTY: - Each machine carries a 12-month warranty, which can be extended by an additional two years. - After the warranty period, we ensure our customers have access to all spare parts. SERVICE: - We have our own mobile service team that reaches all our customers throughout Germany and abroad. KINGWAY is Europe's largest and leading importer of construction and agricultural machinery. For 25 years, we have been active in the European market, importing and selling between 3,000 and 4,000 machines annually, earning the trust of numerous customers. KINGWAY DEUTSCHLAND is the only stationary distributor of the Kingway brand in Germany. Only here can you visit and test all of our machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main Kingway branch in Germany. We have a vast selection of machines in stock, with about 100 units available at any time. We deliver throughout Germany, Austria, Switzerland, Italy and other neighboring countries. We also offer full access to parts and mobile services for our customers. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, color: red, empty load weight: 2,200 kg, maximum load weight: 600 kg, emission class: euro5, shovel volume: 0.3 m³, digging bucket width: 1,100 mm, Year of construction: 2025, operating hours: 1 h, Modern KINGWAY H180T TELESCOPIC LOADER – professional and durable. With a lifting capacity of 600 kg, this model is the ideal equipment for the most demanding industries, including construction, electrical, plumbing, renovation, and similar sectors. We also guarantee service support after the warranty period expires. LOADERS are manufactured under the supervision of European technicians. The equipment features a robust design and can be used in all conditions. TECHNICAL DATA: ✒︎ XINCHAI engine ✒︎ Power: 18.2/24.5 kW/hp ✒︎ Number of cylinders: 3 ✒︎ Lifting capacity: 600 kg ✒︎ Max. hydraulic pump pressure: 200 bar ✒︎ Max. hydraulic pump flow: 42 l/min ✒︎ RPM: 3000 rpm ✒︎ Bucket capacity: 0.3 m³ ✒︎ Bucket width: 1100 mm ✒︎ Weight: 2200 kg ✒︎ Travel speed: 17 km/h ✒︎ Min. turning radius: 2700 mm ✒︎ Max. steering angle: ±49° ✒︎ Length: 3820 mm ✒︎ Height: 2310 mm ✒︎ Width (tyres 10.0/75-15.3): 1050 mm ✒︎ Width (tyres 31×15.5-15): 1270 mm ✒︎ Width (tyres 400/60-15.5): 1350 mm ✒︎ Max. lift height (fully extended arm): 3526 mm ✒︎ Max. dump height (fully extended arm): 3000 mm ✒︎ Max. lift height (retracted arm): 2900 mm ✒︎ Max. dump height (retracted arm): 2380 mm Hedpfx Ahswzcb Tjzofi ✒︎ Reach: 1132 mm ✒︎ Minimum ground clearance: 200 mm ✒︎ Wheelbase: 1540 mm ✒︎ Hydraulic oil tank capacity: 40 l ✒︎ Fuel tank capacity: 45 l FEATURES: ✒︎ High-quality, robust construction ✒︎ EURO hitch ✒︎ Easy handling ✒︎ Highly manoeuvrable ✒︎ Compact and versatile ✒︎ Lighting system ✒︎ Hydraulic quick-coupler ✒︎ Third hydraulic circuit for attachments ✒︎ CE certified to the latest standards and guidelines INCLUDED: ✒︎ 1 x H180 T wheel loader / yard loader ✒︎ Including bucket + forks ✒︎ Hydraulic quick-coupler ✒︎ Joystick control ✒︎ All-wheel drive ✒︎ EURO HITCH ✒︎ Road approval PRICE: €16,050 net €19,100 gross - INCLUDES bucket + forks + quick-coupler - For regularly serviced machines, we EXTEND WARRANTY to TWO YEARS - FREE 12 months WARRANTY - after this period, we supply all original parts as needed! - FREE delivery within a 200 km radius - VAT-FREE sales possible (with VAT ID number only) - FINANCING available - We are always at your service! KINGWAY GERMANY is the only authorised stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and Kingway’s main branch in Germany. We have a huge selection of machines in stock, with around 70 units available at all times. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighbouring countries, and offer access to all spare parts for our customers. Book an appointment and come for a test drive!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel tank capacity: 15 l, color: grey, empty load weight: 1,200 kg, shovel volume: 0.3 m³, Year of construction: 2025, operating hours: 1 h, The YAMA S15 LITE crawler excavator – modern, professional, and durable. The YAMA S15 LITE model is the ideal machine for demanding construction, electrical, plumbing, and renovation companies as well as service providers in similar sectors. The YAMA S15 LITE is also equipped with a swing boom, significantly facilitating work in confined spaces. We also offer post-warranty service support. The mini excavators are designed and manufactured under the supervision of European engineers. The robust construction ensures reliable operation under all conditions. TECHNICAL DATA: Operating weight: 1,200 kg Bucket volume (set with 3 buckets): 0.03 m³ Engine model: LAIDONG Engine power: 18.4 kW / 25 HP Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Extendable tracks: No Max. gradeability: 35° Pump type: Gear pump System pressure: 16 MPa Hydraulic flow: 25 l/min Max. travel speed: 2 km/h Platform rotation speed: 9–10 rpm Digging force: 13 kN Ground pressure: 30 kPa Fuel tank capacity: 15 l DIMENSIONS: Hedpfxjwzh A Ne Ahzjfi Overall length: 2,870 mm Overall width: 1,000 mm Overall height: 2,150 mm Blade width: 1,000 mm Blade height: 220 mm Track gauge: 800 mm Track width: 180 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Max. digging height: 2,740 mm Max. dumping height: 1,750 mm Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. reach at ground level: 2,400 mm Minimum swing radius: 1,550 mm Max. digging radius at ground level: 3,227 mm Max. blade lift height: 325 mm Max. blade lowering depth: 175 mm PRICE: €10,400 net €12,376 gross

Condition: new, functionality: fully functional, power: 10.3 kW (14.00 HP), color: red, lifting power: 600 kg/m, shovel volume: 0.13 m³, Year of construction: 2025, The design of the simplified control panel is user-friendly, making operation easier and more comfortable. Comfortable seating, intuitive operation Ergonomically designed seats enable long working periods without fatigue. The recommended operator layout streamlines the workflow and increases efficiency. Machine body made from high-quality material The frame of the mini loader is manufactured from high-grade steel, enhancing stability and wear resistance, which ultimately improves the machine’s durability. More powerful machine core A brand-name engine and premium internal components ensure reliable performance of the mini loader. PERFORMANCE: Model: H130 PRO Payload: 238 kg Bucket volume: 0.13 m³ Maximum lifting force: 600 kg Travel speed: 0–4.2 km/h Hfedpfx Ahsw Ufqijzsi Hydraulic pressure: 18.5 MPa Lifting time: 4.7 s Lowering time: 3.2 s Dumping time: 4.6 s Gradeability: 30% Operating weight: 780 kg ENGINE: Brand: KOOP Model: 192F Type: 1-cylinder, diesel Power: 14 hp / 3600 rpm Fuel consumption: ≤ 2.3 l/h Starting: electric Tank capacities Fuel tank: 5.5 l Engine oil: 1.65 l Hydraulic oil: 23 l DIMENSIONS: Length with bucket: 2373 mm Width with bucket: 1050 mm Width without bucket: 1010 mm Height with ROPS: 1867 mm Height without ROPS: 1291 mm Track width: 800 mm Ground clearance: 180 mm WORK RANGE: Maximum working height: 2572 mm Height to bucket pivot pin: 1953 mm Maximum dump height: 1484 mm Dump reach: 561 mm Dump angle at max height: 29° Rollback angle on ground: 24° PRICE: €6,900 net €8,211 gross KINGWAY DEUTSCHLAND is the sole permanent distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. Our extensive inventory ensures around 100 machines are available at any time. We deliver throughout Germany, Austria, Switzerland, Italy, and neighboring countries. We also provide our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 52.96 kW (72.01 HP), fuel type: diesel, fuel tank capacity: 120 l, color: red, empty load weight: 7,700 kg, maximum load weight: 3,000 kg, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: all wheel drive, cabin, EQUIPMENT AND ADVANTAGES: - Electro-hydraulic joystick for easy one-handed control - Hydraulic quick coupler and front hydraulic outlet for fast tool changes - Electro-hydraulic proportional control for precise operation - Swivel frame with leveling function for greater stability - Radio with USB and Bluetooth - Load securing indicator for increased safety - Cab doors open separately at the top and bottom - Three wipers (front, top, rear) for optimal visibility - Efficient coolers for hydraulic oil, torque converter, and water TECHNICAL DATA: Model: 830 Load capacity: 3,000 kg Max. lifting height: 8,000 mm Operating weight: 7,700 kg Hfjdpfx Aewzb Ufehzji Engine: Yanmar 4TNV98CT, 53.7 kW / 72 hp Rated speed: 2,500 rpm Cooling system: liquid-cooled Engine type: 4-cylinder, 4-stroke diesel DIMENSIONS: Length (without attachments): 7,400 mm Width: 2,195 mm Height to cab roof: 2,600 mm Bucket size (L × W × H): 1,850 × 1,300 × 900 mm Telescopic arm movements: Rotation: 42° Lifting time: 11.5 s Lowering time: 9 s Extension time: 6 s Retraction time: 11 s Bucket tilting: 3.5 s Bucket dumping: 3 s HYDRAULICS: Working pressure: 28 MPa Pump output: 117 l/min Tank capacities: Fuel: 120 l Hydraulic oil: 160 l Further details: Tires: 16/70-24 Brakes: disc brake Transmission: hydrodynamic Max. speed: 34 km/h Gears: 4 forward / 4 reverse Shifting: electrohydraulic + mechanical Drive: all-wheel drive Steering angle: 27° Track width: 1,760 mm Wheelbase: 2,800 mm PRICE: €50,500 net €60,095 gross

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, fuel tank capacity: 55 l, color: red, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, lifting height: 3,300 mm, emission class: euro5, mast type: telescopic, shovel volume: 0.6 m³, digging bucket width: 1,670 mm, Year of construction: 2025, Model: FARMER 812 The FARMER 812 is the ideal machine for agricultural, construction, electrical, sanitary, repair, and service companies as well as similar sectors. We also guarantee service for the machine after the warranty period has expired. The wheel loaders are manufactured based on and under the supervision of European technicians. The equipment is built on a robust frame and is capable of operating under all conditions. The comfortable, glazed cab ensures safe and convenient operation. DIMENSIONS AND WEIGHT: Length (without attachments): 4.0 m Length (with standard bucket): 4.7 m Overall width: 1.5 m Overall height: 2.45 m Operating weight (with bucket): 3000 kg Operating weight (without bucket): 2750 kg Wheelbase: 1.12 m Track width: 2.15 m DRIVE AND TECHNICAL EQUIPMENT: Engine: Diesel, Euro 5 Engine model: DEF20NJF4 Number of cylinders: 4 Engine power: 25 HP Battery voltage: 12 V Gears: 1 Drive: Cardan shaft Brakes: Drum brakes Parking brake: Disc brakes OPERATING PARAMETERS: Lifting height (lower edge of standard bucket): 2.54 m Maximum lifting height (upper edge of attachment): 3.0 m Maximum lifting height (upper edge of bucket): 3.3 m Dumping height (45°): 2.05 m Maximum lifting capacity (at attachment): 1.5 t Bucket width: 1.67 m Bucket volume: 0.6 m3 Bucket weight: 285 kg HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lift time: 4 s Total boom cycle time: 7 s Fuel tank: 55 L Hydraulic oil tank: 65 L Automatic leveling: Yes * Hydraulic quick-hitch system * 2x hydraulic control circuits * Reversing camera * Heating Hjdpfxsw Ufixj Ahzjfi * Ventilation * Radio * Suspension seat * Joystick control * Collapsible steering column * Road and work lights PRICE: €16,800 net €19,992 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main German office for Kingway. We offer a huge selection of machines in stock, with around 100 units always available. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also provide access to all spare parts and mobile service for our customers. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, color: yellow, empty load weight: 990 kg, Year of construction: 2025, operating hours: 1 h, Now only €6,500!! BAGGER 1000 – professional and durable. The BAGGER 1000 model is the perfect equipment for the most demanding construction, electrical, hydraulic, repair, and service companies in related industries. We also guarantee equipment servicing after the warranty period has expired. Our mini excavators are manufactured under the supervision of European technicians. The equipment is built on a robust structure and can operate under all conditions. TECHNICAL DATA: - Weight: 990 kg - Engine: Koop - Number of cylinders: 1 - Euro 5 - Oil cooler: YES - Maximum speed: 1.3 km/h - Maximum climbing ability: 30° - Pump type: gear pump WORKING RANGE: - Maximum digging reach at ground level: 2850 mm Hfsdpfxow Ufras Ahzei - Maximum digging depth: 1650 mm - Maximum dump height: 2610 mm - Maximum unloading height: 1850 mm - Maximum vertical digging depth: 1375 mm - Blade lift height above ground: 345 mm - Blade lowering depth: 255 mm DIMENSIONS: - Overall length: 2300 mm - Overall height: 2300 mm - Overall width: 930 mm PRICE: net €6,500 gross €7,735 - INCLUDES 3 excavator buckets (20, 40, 80 cm) - For machines regularly maintained by us, we extend the warranty to three years (warranty valid exclusively for machines purchased directly from us – not from other dealers). - FREE 12-month WARRANTY – after this period, we supply all original parts if required! - We operate our own mobile service, reaching all our customers in Germany and beyond. - FREE delivery within a 200 km radius - VAT-free sales possible (with EU VAT number only) - FINANCING is available. KINGWAY DEUTSCHLAND e.K. is the only authorized stationary dealer for the Kingway brand in Germany. Only with us can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a wide selection of machines in stock – approximately 70 models are always available. We deliver machines to all of Germany, Austria, Switzerland, Italy, and other neighboring countries. In addition, we provide our customers with unrestricted access to all spare parts. Make an appointment and come for a test drive!

Condition: new, functionality: fully functional, power: 7.35 kW (9.99 HP), color: yellow, empty load weight: 1,000 kg, shovel volume: 0.2 m³, Year of construction: 2025, 3-YEAR WARRANTY!! Modern Mini Excavator JOKER RS – professional grade and built to last. The JOKER RS model is the ideal equipment for demanding construction, electrical, plumbing, renovation, and service companies in related industries. The JOKER RS is additionally equipped with a swing boom, significantly facilitating work in confined spaces. We also guarantee service for the equipment after the warranty period has expired. The mini excavators are manufactured under the supervision of European technicians. The machine features a robust design and can be used in all conditions. TECHNICAL DATA: - Operating weight: 1000 kg - Bucket capacity: 0.02 m³ - Engine: Koop - Number of cylinders: 1 cylinder - Power / RPM: 10 hp at 3000 rpm - Maximum torque: 23.8 Nm at 3000 rpm - Maximum digging reach at ground level: 2890 mm - Maximum digging reach: 2940 mm - Maximum digging depth: 1650 mm - Maximum dumping height: 2600 mm - Maximum discharge height: 1970 mm - Maximum vertical digging depth: 1320 mm - Blade lift above ground: 325 mm - Blade drop below ground: 175 mm - Hydraulic lines for: hammer, auger DIMENSIONS: - Wheelbase: 910 mm - Track length: 1235 mm - Machine width: 930 mm - Track width: 180 mm - Track height: 320 mm - Total length: 2310 mm - Total height: 2195 mm PRICE: €6,302 net €7,500 gross - INCLUDES 3 digging buckets (20 cm, 40 cm, 80 cm) - For machines that are regularly serviced by us, we extend the warranty to three years (Warranty only applies to machines purchased directly from us—not from other dealers) - FREE 12-month WARRANTY – after this period, we supply all original parts as needed! - We offer our own mobile service reaching all our customers in Germany and beyond - FREE delivery within a 200 km radius - SALE POSSIBLE EXCLUDING VAT (with valid VAT ID only) - FINANCING available KINGWAY DEUTSCHLAND e.K. is the exclusive stationary distributor of the Kingway brand in Germany. Only with us can you view and test all machines on-site. Hfodpfx Ahjw Ufr Hozoi We are the largest importer of construction and agricultural machinery in Europe as well as the main office of Kingway in Germany. We keep a large selection of machines in stock—around 70 models always available. We supply machinery across Germany, Austria, Switzerland, Italy, and other neighboring countries. Customers enjoy full access to all spare parts. Schedule an appointment and come for a test drive!

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, empty load weight: 2,700 kg, Year of construction: 2025, The modern VIP27 mini excavator is a professional, durable machine. The VIP27 model is the ideal choice for demanding construction, electrical, plumbing, renovation companies, as well as service providers in related industries. The VIP27 is additionally equipped with a swing boom, significantly facilitating work on confined job sites. The machine is also fitted with extendable tracks, ensuring improved stability and flexibility. We offer reliable after-sales support. The mini excavators are manufactured based on and under the supervision of European engineers. The machine is built on a robust chassis and is suitable for use under all conditions. TECHNICAL DATA: Model: VIP 27 Operating weight: 2,700 kg Bucket capacity: 20, 40, 100 liters Engine model: YANMAR Engine power: 15 kW Number of cylinders: 3 Oil cooler: Yes Swing boom: Yes Extendable rubber tracks: Yes (1.3 m–1.5 m) Max. gradeability: 30% Pump type: Piston pump Hydraulic pressure: 20.6 MPa Hydraulic oil flow: 36 l/min Travel speed: 2.6 / 4.5 km/h Slew speed: 9.5 rpm Max. digging force: 19.5 kN Tank capacity: 26 l DIMENSIONS: Overall width: 1,500 mm Overall height: 2,450 mm Overall length: 3,200 mm WORKING RANGE: Hsdpfow Ufwvsx Ahzsfi Max. digging depth: 2,430 mm Max. dumping height: 2,610 mm Max. digging reach: 4,136 mm Max. ground reach: 4,100 mm Minimum swing radius: 750 mm 2-speed travel Heater Radio Fan PRICE: €21,000 net €24,990 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge stock of machines, with around 100 available at any given time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, Year of construction: 2025, wheelbase: 189 mm, Scissor lift – High quality and reliability. The scissor lift is the ideal solution for all work at heights, offering safety, stability, and ease of use. Thanks to its compact design, it is suitable for both indoor and outdoor use. - High load capacity and stability – allows for work even with heavier equipment. - Easy operation – intuitive controls for maximum comfort. - Versatile applications – construction work, warehouse work, maintenance work, and much more. - Robust construction and durability – reliable operation for many years. Invest in a modern solution that will increase your work efficiency! Contact us to learn more about available models and delivery options. DIMENSIONS: Hodpsv T I N Iofx Ahzsfi Maximum working height: 8.00 m / 10.00 m / 12.00 m / 13.80 m Maximum platform height: 6.00 m / 8.00 m / 10.00 m / 11.80 m Platform size (length × width × height): 2.26 x 0.81 x 1.1 m / 2.26 x 0.84 x 1.1 m / 2.29 x 1.12 x 1.1 m / 2.29 x 1.12 x 1.1 m Overall dimensions (length × width × height, railing not folded): 2.48 x 0.84 x 2.21 m / 2.48 x 0.84 x 2.32 m / 2.48 x 1.19 x 2.46 m / 2.48 x 1.19 x 2.58 m Overall dimensions: (length x width x height, with railings folded) 2.48 x 0.84 x 1.73 m / 2.48 x 0.84 x 1.85 m / 2.47 x 1.19 x 1.95 m / 2.47 x 1.19 x 2.07 m Platform extension: 0.9 m Minimum ground clearance: 0.1 / 0.02 m Wheelbase: 1.89 m Machine weight: 1880 kg / 230 kg / 2540 kg / 2880 kg PERFORMANCE: Rated load: 380 kg / 230 kg / 320 kg / 320 kg Safe working load of extended platform: 113 kg Turning radius (inside wheel/outside wheel): 0 / 3.1 m Lift/Travel Motor: 24V/3.3kw / 24V/3.3kw / 24V/3.3kw / 24V/4.5kw Lifting Speed: 3-5m/min Travel Speed (folded): 3.5km/h Travel Speed (extended): 0.8km/h Maximum Gradeability: 25% Maximum Permissible Working Angle: 1.5°/3° Tires: 381x127 mm Battery: 4x6V/200ah / 4x6V/200ah / 4x6V/200ah / 4x6V/240ah Lithium Battery (optional): 24V/230ah Charger: 24V/30A KINGWAY GERMANY is the only stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the headquarters of Kingway in Germany. We have a huge selection of machines in stock, with around 100 available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we also offer our customers access to all spare parts and mobile service. KINGWAY GERMANY Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann