Used Rambaudi Rammatic 600 for sale (11,616)

Condition: like new (used), ROBOT ARM BRAND: KUKA servo controller 00-134-525 KPS-600/20-ESC Guedpfx Aqjz I Na Rjgeh

Condition: used, Machining area: - in the X direction without gluing 6000 mm - in the X direction with gluing 5000 mm - in the Y direction 1200 mm - in the Y direction with main spindle + center distance 20 mm 1300 mm max. workpiece height above - top edge of suction plate Z1 100 mm - max. workpiece thickness Z2, dependent on equipment/application Work table height: approx. 950 mm 1 main spindle with pneumatic feed stroke - drive power: 12 kW in S-1 operation - tool holder: HSK F63, taper diameter = 38 mm - tool change: automatic - change force: 11000 N - tool weight: max. 6 kg - direction of rotation: clockwise/counterclockwise, programmable - speed range: continuously variable 1500 - 24000 rpm, programmable - drive: frequency-controlled three-phase motor - spindle lubrication: single grease lubrication - spindle cooling: water cooling 1 CNC axis rotating 360 degrees 1 vertical drilling unit S21 Machine table consists of: - 6 support arms adjustable in the X direction, each with a rear and center stop, all stops controlled by the program - 6 sets of suction plates consisting of a total of - 6 suction plates 114 x 159 x 100 mm - 6 suction plates 125 x 75 x 100 mm - The support arms and suction plates can be individually positioned according to the corresponding workpiece size. Changeover area: - without pendulum machining, without gluing: X = 2 x 2900 mm - free space in the middle: X = 200 mm - without pendulum machining, with gluing: X = 2 x 2150 mm - free space in the middle: X = 700 mm - with pendulum machining, without gluing: X = 2 x 2400 mm - free space in the middle: X = 1200 mm - with pendulum machining, with gluing: X = 2 x 1700 mm - free space in the middle: X = 1600 mm Feed drive system Rapid traverse rates: - X-axis 100 m/min - Z-axis 25 m/min Air pressure: 6 bar Tool changer magazine with 18 positions Gujdpfx Aszupibsqgoh Tool coding: position-coded Tool weight: max. 6 kg Tool length: max. 150 mm Tool diameter: max. 100 mm when fully loaded max. 150 mm with free adjacent positions or nesting Central connection for extraction Mains voltage: 3/N/PE, 400/230 V, 50 Hz 1 vacuum pump 100 m3/h

Condition: used, functionality: limited functionality, Year of construction: 2014, operating hours: 12,150 h, load capacity: 3,000 kg, lifting height: 5,130 mm, free lift: 1,555 mm, fuel type: electric, mast type: triplex, construction height: 2,321 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Not operational Technical condition: poor Battery voltage: 80V Description: Half cabin Side shifter 3rd valve Gjdpszvtv Isfx Aqgouh

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 3,863 h, load capacity: 2,500 kg, lifting height: 5,330 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,410 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Guodozvz Hhspfx Aqgeh Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 40 - 60% Battery type: PzS Battery year of manufacture: 2022 Description: Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, full cabin, full free lift.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 9346, Machine in good condition Vertical saw blade diameter: 600mm Horizontal saw blade diameter: 500mm Notching width: at 90 degrees, processing of profiles up to 300mm Miter cuts up to 30 degrees Maximum profile height: 280mm Notching depth: at 90 degrees, horizontally up to 185mm Gusdpfozp Rnnjx Aqgjh Material stop can be swiveled to 30 degrees, 90 degrees, 45 degrees Motorized adjustment of the angle with digital display

Condition: used, Year of construction: 2007, RÖDERS RFM 600 with RCE 1 – High-speed machining center – 42,000 RPM – only approx. 1,370 operating hours Gusdpfxszk Eu Se Aqgeh For sale is a high-quality vertical high-speed machining center, a RÖDERS RFM 600 with RCE 1, manufactured in 2007. (An RFM 600 from 2003 is also available at the same location.) The machine is ideally suited for the highly precise machining of graphite, aluminum, non-ferrous metals, as well as hardened tool steels, and is used primarily in the tool, mold, and precision machinery industries. Technical data: Year of manufacture: 2007 Travel distances X/Y/Z: 600 / 450 / 300 mm Table: 700 x 550 mm RÖDERS CNC control HSK-40 spindle Spindle speed up to 42,000 RPM 20-position tool changer Max. workpiece weight 400 kg Machine weight approx. 6.5 t Equipment: RCE 1 rotary tool changer Smoke extraction Well-maintained overall condition Only approx. 1,370 operating hours Ideal for tool and mold making, electrode manufacturing, graphite machining, precision milling, and HSC/high-speed cutting. The machine can be inspected under power after prior appointment. Location: Germany Subject to prior sale. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge but does not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, maximum cutting height 160 mm maximum cutting width 610 mm disc diameter 600 mm Gujdpfszz N Hgsx Aqgsh minimum disc diameter 590 mm disc rotational speed 2800 rpm motor power 7.5 kW 2 stops year of manufacture 2001 weight approx. 700 kg

Condition: used, Year of construction: 2008, control SIEMENS - - - - - - - - - - - - - - - - - - Guedpezz S Itofx Aqgsh CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600

Condition: used, Year of construction: 2009, control SIEMENS - - - - - - - - - - - - - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Gedpfx Aqozz S Iyjgjuh Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600

Condition: used, Year of construction: 2008, Roll production line König Basic Rex II Combiline 600 Year of manufacture: 2008 Condition: Currently undergoing maintenance; photos taken before maintenance For the production of round, oval, stamped, oblong, and flat products made from wheat dough, mixed wheat dough, cereal dough, or fine yeast dough Suitable for shaped rolls, oblong rolls, etc. Working width: 600 mm Max. hourly output: 7,500 pieces (5 rows) Max. hourly output: 4,500 pieces (3 rows, for oblong dough products) Weight range: 35–85 g Dough divider and rounder, type Basic Rex II, 5 rows Long-working board before the proofing cabinet Guodpfx Aqoz A Rynjgoh Proofing cabinet with climate control Stamping station with reversible cups for stamping round and oblong products Forming station with 2 pressure rollers and a driven upper belt Depositor for 60 x 80 cm or 60 x 100 cm baking trays and boards Manual removal of baking trays Includes stamping tools for Kaiser rolls, Housky rolls, and oblong dough rolls Includes dough divider block for 5- and 3-row operation

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC machining center Kunzmann WF 600 CNC Control system: Heidenhain TNC 640 Year of manufacture: 2015 Internal machine number: 76 Travel ranges: X-axis 600 mm Guedpsz A Tz Iofx Aqgsh Y-axis 400 mm Z-axis 400 mm Spindle taper: SK 40 DIN69871 Spindle speed: 1 - 5,000 rpm

Condition: used, Year of construction: 1993, functionality: unexamined, machine/vehicle number: 104931294, grinding length: 1,500 mm, grinding width: 600 mm, type of input current: three-phase, input voltage: 400 V, Flat and profile grinding machine Geibel & Hotz FS 1560 SA, manufactured in 1993. Machine no. 104931294, connection 3 x 400 V, 50 Hz, rated current 45 A, fuse rating 63 A, control voltage 230/24 V. Grinding length 1,500 mm, grinding width 600 mm. Magnetic clamping table, coolant supply to the grinding wheel, splash guard, control panel with preset counters for the Y and Z axes. Gujdpoz A Ukwefx Aqgoh Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by agreement. All information without guarantee.

Condition: good (used), Year of construction: 2012, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 6.934 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.050 cm Dimensions of cargo space: 815 x 315 x 254 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1370 m Max swing of arm in degrees: 175 Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: E600JP Year of build: 2012 Condition: Used Data: Max. working height: 20,51 m Platform height: 18,51 m Max. reach: 13,70 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,83 x 0,76 m Swivel range: +/- 175° Overhang: 1,25 m Gujdpfxev Ti Rgj Aqgoh Gradeability: 30 % Total dimensions LxWxH: 10,10 x 2,41 x 2,54 m Transport position LxH: 8,15 x 3,15 m Movable up to working height: 20,50 m Wheel pressure max.: 60 kN Ground clearance: 0,29 m Drive type: Battery Empty weight: 7.377 kg Special features: Rotating work basket, basket arm/vertical rotation angle -40°/+100°, all-wheel drive, white tires, differential lock, cross boom, very long work cycles possible

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,578 h, load capacity: 4,000 kg, lifting height: 4,670 mm, free lift: 1,644 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 40 - 60% Battery voltage: 80V Battery Ah: 775Ah Battery type: PzS Battery year of manufacture: 2019 Battery condition: 80 - 100% Gsdpfx Aqezviavjgsuh Description: The vehicle will be inspected according to UVV regulations. Before delivery, the machine will receive a service and be cleaned. Upon request, the machine can be painted for an additional cost. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 450 h, load capacity: 2,000 kg, lifting height: 3,450 mm, fuel type: gas, mast type: simplex, construction height: 2,377 mm, drive type: Treibgas, LPG forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Gujdpfx Aqezvi I Hsgjh Sideshift, 3rd valve,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,151 h, load capacity: 5,000 kg, lifting height: 5,060 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Gusdpfx Aozuhgxeqgjh Technical condition: very good Front tire type: Non-marking Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire condition: 40 - 60% Battery voltage: 80V Battery capacity: 930Ah Battery year of manufacture: 2022 Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cabin, full free lift, joystick, LED.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 2,660 kg, load capacity: 600 kg, arm reach: 2,826 mm, controller manufacturer: Kuka, Equipment: documentation/manual, KUKA KR 600 R2830 / FLR industrial robot, manufactured in November 2021. The robot is unused and has 0 operating hours. Guodez D Tkropfx Aqgeh Main specifications: * Payload: 600 kg * Maximum reach: 2,826 mm * Robot weight: 2,660 kg * Serial number: 1414192 * Year of manufacture: 2021 * Condition: New / unused, 0 operating hours The robot has never been used in production and is in excellent condition.

Condition: used, Year of construction: 2008, functionality: fully functional, Single-head welding machine Gusdpjzpyfcofx Aqgoh

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed Gjdpfxszxdn To Aqgeuh belt width 600 mm hood with electromechanical lifting system Suitable for steam injection (to heat up and to improve product yields) 180 kW / 275 A suitable for CIP cleaning system with extra infeed en outfeed conveyor outside dimensions (l x w x h) : ± 9.500 x 1.900 x 3.700 mm

Condition: like new (used), Year of construction: 2018, operating hours: 591 h, load capacity: 2,000 kg, lifting height: 2,500 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: JUNGHEINRICH EJG 320 Mast: 2W2500 Guedpfx Aqjzv H Scogjh ID: 24061.5795 Category: Demo Mast: 2W2500 Lowered height: 2120 mm Lifting height: 2500 mm Capacity: 2000 kg Year: 2018 Hours: 591 hours Battery: 24 V / 330 Ah - GEL Options: A VERY unique COUNTERBALANCE stacker!!! Equipped with: - FREE-LIFTING adjustable forklift forks - SUITABLE for all types of pallets - POWER STEERING!!!

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,713 h, load capacity: 4,000 kg, lifting height: 4,670 mm, free lift: 150 mm, fuel type: electric, mast type: triplex, construction height: 2,035 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Godszwacqjpfx Aqgouh Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery type: PzS Battery year of manufacture: 2018 Side shifter, fork positioner, 3rd valve, 4th valve, front work light, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cabin, seat.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 725 h, load capacity: 5,000 kg, lifting height: 4,030 mm, free lift: 1,230 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, fork length: 2,000 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Condition: As new Technical condition: very good Front tire type: Non-marking Front tire condition: New Guedpfjzwacwjx Aqgjh Rear tire type: Non-marking Rear tire condition: New Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year of manufacture: 2016 Description: Price includes a new UVV inspection, 4x SE non-marking tires NEW, lighting according to STVZO, paintwork in as-new condition (original), the 2016 battery will be regenerated with a power cycler including Kappa test (a new or recently refurbished battery can be purchased for an extra charge), charger included with plug, ex-rental unit from Still Germany. We will gladly arrange cost-effective transport for you. A lease-purchase option is generally possible. We are an official Jungheinrich partner. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, STVZO compliance, full cabin, full free lift, CE certificate, scale, rotating beacon, Mini lever, Bluespot

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Gujdezvc R Uspfx Aqgjh Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469.

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the Gujdpfxjz Df Txe Aqgeh drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: ready for operation (used), Year of construction: 2007, overall weight: 27,000 kg, spindle speed (max.): 6,000 rpm, This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. • Axes: 4 • Maximum Machining Area X/Y/Z: 1000 mm x 900 mm x 1000 mm • 4th Axis: 360° x 1° • Rapid Feed Rate: 30 m/min – 12 m/min • 1° B-axis • Drive Power/Max. Torque: 37 kW 10 min, 26 kW continuous load / 606 Nm • Tool Positions: 150 Gsdpfozycdcsx Aqgeuh • Tool Holder: MAS BT 50 • ConSep System • Measuring Probe • Tool Breakage Monitoring • Pallet station with 6 pallets, pallet size 630 x 630 mm • External cooling/internal cooling 20 bar/internal air Dimensions Machine Depth 10500 mm