Used S&S Rp 2000 for sale (73,742)

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control Siemens SINUMERIK 810D pl Itedezaf Hnepfx Ai Rok turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti

Year of construction: 2020, condition: ready for operation (used), A Schirmacher high-frequency sliding-table welding machine is available. Table dimensions X/Y: 750mm/550mm, max. pressing force: 20kN, generator output: 10kW, operating frequency: 27.12MHz, control system: Siemens. Documentation available. An on-site inspection is possible. Itedpfx Aiszh Niuj Rjk

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Itedpfxezt Nbze Ai Rjk Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2004, Description to follow! Itodpfsxy S D Sex Ai Rjk

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Isdpfx Asyupl Dei Rjtk Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Handheld remote control

Condition: excellent (used), DMC Topsand 2000 Calibrating and Sanding Machine 4 Belts First group: 1 roller Second group: 1 roller Third group: 1 electronically controlled sectional pad Fourth group: 1 electronically controlled sectional pad for superfine finishing Isdpoi Dakrefx Ai Rjtk Usable width: 1350 Vacuum system on the belt

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 16 A, KUHLMEYER Type ZBS Twin-Belt Grinding Machine - incl. automatic mode and scissor lift table Itjdjza Uhhopfx Ai Rek - for rough and fine sanding in a single machine - Machine location: The Netherlands - Further technical specifications, information, and videos of the machine are available upon request.

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device features: - Schröder MHSU shear - Cutting capacity: see nameplate, up to 3mm steel; significantly more for aluminum - Working length: just over 2 meters - Manual backgauge approx. 750 mm / a 1000 mm backgauge is equipped with digital display - Side/angle stop - Extension arm up to 2 meters - Reversible blades - Cutting gap lighting - Sheet metal chute - Foot pedal - Weight approx. 1.3 t We also have other machines available, such as the Schechtl MAX 200 – 2.5mm, or Schechtl MA 200 – 2mm and HA series, Schröder AKV 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears by RAS, etc. The current net new price is approximately 25,000 EUR. You will receive an invoice with VAT shown separately; VAT is included in the invoice amount. Ijdpsy R Efaofx Ai Rotk Shipping can be arranged if requested. Forklift available on site. Free loading as shown in the pictures. Viewing and test run possible by phone appointment. Payment in cash upon collection. If there is anything else I can assist you with, please give me a short call – thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item number Schröder MHSU 2m 3mm 260511

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back Itedpfxjlatv Aj Ai Rsk - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: used, Year of construction: 1995, Used machine Year of manufacture 1995 Equipment and technical data: economical: - Turbo system: 25% higher plant output thanks to state-of-the-art application technology, and all within the same footprint! - reduced throughput times thanks to optimised automatic program control for fast UV systems - up to 70% cost savings compared with casting and spraying through the use of solvent-free systems and one-man operation flexible: - through cost-effective one-man operation with return function or, optionally, in pass-through mode for two-man operation - the system grows; additions with extra rolling, smoothing or sanding units are possible ergonomic: - easy operation thanks to ergonomic controls service-friendly: - thanks to cleaning circuit and quick-change system process-reliable: - top surfaces, exactly reproducible included: - roller conveyor 2000 mm long - ELX 1400 roller conveyor - bar conveyor 3000 mm long - UV drying channel 1 lamp 60/80/120 W Working height: 850 - 950 mm Application roller, rubberised: D=238 mm Metering roller, chrome-plated: D=174 mm Pass-through height: 3-120 mm UV radiation module: 80/120 watt mercury Connected load: approx. 21 kW Dimensions: 1300 x 3080 mm Availability: at short notice Isdpszlbq Esfx Ai Rotk Storage location: Röllbach

Condition: used, Year of construction: 1988, Welding fume extractor Fabr.ESTA Type:SRF - 2000 Year 1988 Itodpfxeu Hlppe Ai Rsk Ready for use.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION max 2-3 hours , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WORKING STATIONS: TECHNICAL DATA: 1. Left+right cutter 2. Roller glue application 3. Front and rear saw 4. Straight cutter also for solid laminates 5. ⁠Angle cutter 6. ⁠Rondomat front, rear, top, bottom 7. ⁠Straight wedge cutter Isdpfx Ajvi Rd Tsi Rjtk 8. ⁠Wedge cutter with radius 9. ⁠ Dryer WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS MACHINE LENGHT APPROX 7 METERS WEIGHT : 3500 KG

Year of construction: 2006, condition: ready for operation (used), A Bütfering metal deburring machine is offered for sale. Maximum working width: 1350mm, feed speed: 20m/min, processing stages: 3, 1st processing stage: abrasive belt, 2nd processing stage: 2 rows of cup brushes, 3rd processing stage: polishing belt, minimum and maximum workpiece thickness: 0.5mm/100mm, maximum material thickness: 100mm. Including one damaged conveyor belt and abrasive belts. Machine dimensions: 2000mm/2050mm/3400mm, weight: approx. 6000kg. Inspection possible by appointment. Itedpfx Aijzl U I Do Rok

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) Itjdpfxsx N Icxj Ai Rok • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control Ijdpfx Aiotwv S Nj Rotk - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor Isdom Nb Riopfx Ai Rstk >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Condition: used, Year of construction: 1977, functionality: fully functional, Bobst SPO 2000, ref. 3013 Year: 1977 Maximum sheet size: 2032 x 1270 mm Minimum sheet size: 600 x 520 mm Maximum cutting force: 550 tons Suitable for corrugated board from 1.5 mm to 9.0 mm Maximum mechanical speed: 5000 sheets per hour Stripping unit included New electrical cabinet New main motor with inverter Pre-feeder The machine is powered and can be tested Iedpfxjzfh I Rj Ai Retk Condition: Good!

Condition: like new (used), Year of construction: 2018, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 673 mm, turning diameter: 313 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 75 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 2,123 mm, total length: 3,257 mm, total width: 2,312 mm, spindle nose: 6, overall weight: 8,118 kg, spindle diameter: 250 mm, CNC Fanuc 31i TURNING SWING DIAMETER Over guide cover: 673 mm WORKING AREA Chuck size: 250 mm Bar capacity: 65 mm Maximum turning diameter: 313,7 mm Maximum turning length: 520,7 mm MAIN SPINDLE Maximum spindle speed: 4.000 rpm Maximum motor power: 26 kW Maximum torque: 421 Nm Base spindle speed: 590 rpm Spindle nose: A2-6 / 25C Spindle bore: 75 mm Maximum 3-jaw chuck size: 250 mm Spindle orientation: 1° SUB-SPINDLE Maximum spindle speed: 5.000 rpm Maximum torque: 347 Nm Base spindle speed: 420 rpm Maximum motor power: 11 kW Spindle nose: A2-6 / 20C Chuck size: 200 mm Bar capacity: 51 mm Spindle bore: 60,4 mm Spindle orientation: 1° Maximum stroke: 638 mm Maximum rapid traverse: 38 m/min Maximum distance between sub-spindle and main spindle: 654,1 mm COOLANT SYSTEM Tank capacity: 254 L Maximum pressure: 13,8 bar High-pressure coolant through turret: 68,95 bar ADDITIONAL FEATURES Resolution: 0,0001 mm Machine length: 3.257 mm Machine depth: 2.312.4 mm Machine height: 2.123 mm Machine weight: 8.118 kg Machine equipped with: • SUPER-PRECISION® certification • Air blast on main spindle Iedozbicvepfx Ai Rotk • 20C collet spindle • Custom Macro B programming • Reinforced HARCRETE® machine base • Grease lubrication on all axes • Optical scales on X, Y and Z axes • 12-bar through-tool coolant system • Parts counter and operating hours counter • Axis resolution: 0.00010 mm • Maintenance kit • Manual Guide i (programming system) • Rigid tapping (without compensation holder) • Laser measurement system with Renishaw ball probe • Live tooling, Y-axis and 20C sub-spindle option Configuration includes: • Sub-spindle • 12-station BMT-55 tool turret with live tooling drive • C-axis on both main spindle and sub-spindle • Y-axis • Optical scale on Y-axis • Ready To Cut option (Warm-up Cycle – Automatic Start) • MARPOSS workpiece probe for BMT-55 • MARPOSS tool setter • Workpiece presence detection in the sub-spindle • Chip conveyor – discharge on the right-hand side of the machine (interface included) • High-pressure coolant system • Spindle reduction sleeve kit • Operating and maintenance manuals and CE Declaration of Conformity

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, ABB Robotics IRB 140 S4C+M2000 Robot Controller: S4C+ M2000 Number of axes: 6 Max. payload: 6 kg Max. working range: 810 mm Year of manufacture: 2006 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. Spare parts are continuously available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please provide the country, city, and postal code. Freight costs upon request – please provide the delivery address. Ijdpfxszmtt Uj Ai Rotk

Condition: excellent (used), Year of construction: 1995, Rotary / carousel wood gluing press HESS, 6 meters Year of manufacture: 1995 Iodpfx Aoy Rzk Sei Rotk The press is operational and in good technical condition. Press infeed • Glue application machine with 2 rollers Technical data of the HESS gluing rotor • 4 working areas, each 6,200 x 1,000 x 150 mm • 4 pressing sections • 8 sliding pressure beams • 2 pneumatic pressure cylinders per each pressure beam • 21 hydraulic rams from above • Pressure force per cylinder: 35,000 N / 3,500 kg • Maximum total pressure at 120 bar: max. 73.5 tons per pressing surface Machine dimensions • Total length: rotor 11,100 mm • Depth: 3,050 mm • Height: 3,350 mm • Weight: 13,500 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,280 h, functionality: fully functional, machine/vehicle number: NL201FH1430, turning length: 510 mm, turning diameter: 356 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, TECHNICAL DETAILS Turning diameter: 356 mm Turning length: 510 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Bar diameter: 65 mm Travel X-axis: 260 mm Travel Z-axis: 590 mm Spindle drive: 15 kW Spindle speed: 5,000 rpm Turret stations / with drive: 12/12 Rapid traverse - longitudinal/flat: 30 m/min MACHINE DETAILS Control: MSX 850 3 Electrical Data Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Rated current: 110 A Rated spindle motor current: 131 A Total power requirement: 32 kW Dimensions & Weight Installation space: approx. 2,320 x 1,783 x 1,819 mm Machine weight: approx. 5.8 t Operating Hours Spindle hours: 12,280 h Machining hours: 13,579 h EQUIPMENT Chip conveyor Ijdpfx Asxhf Efji Rstk Extraction unit Tool setting arm Parts catcher Double foot switch

Condition: good (used), Year of construction: 2010, Sepamatic 2000 T Separator SEPA 2000T separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Manufacturer: Sepamatic Model: Sepa 2000 T Year: 2010 Itjdpfoyhmk Dex Ai Rsk Drum Size: 1,3 mm Power: 7,5kW / 50Hz / 400V Capacity: Up to 4.000 kg/h (depending on product) Machine Dimensions LxWxH: 1.300x1.300x1.700 mm Machine Weight: 1.400 kg.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: EC1606, grinding length: 1,200 mm, grinding width: 500 mm, grinding wheel diameter: 400 mm, distance table to spindle center: 700 mm, grinding wheel width: 50 mm, overall weight: 6,100 kg, grinding spindle speed: 1,500 rpm, space requirement height: 2,600 mm, space requirement length: 4,600 mm, space requirement width: 2,200 mm, Like-new, lightly used surface grinder. In very good condition. Iodpfsy Rxuhsx Ai Rstk Includes digital display on the Y-axis (SINO SDS6).

Condition: ready for operation (used), Year of construction: 2016, operating hours: 28,151 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, controller manufacturer: FANUC, controller model: F31iB with Celos, number of slots in tool magazine: 32, number of axes: 6, This 6-axis DMG MORI NZX 2000/800SY was manufactured in 2016. It features a maximum turning diameter of 320 mm and a swing over bed of 800 mm. The machine is equipped with dual turrets, each with 16 stations, and offers high-speed canned cycle capabilities. If you are looking to get high-quality turning capabilities, consider the DMG MORI NZX 2000/800SY horizontal turning machine we have for sale. Contact us for further details. • Number of turrets: 2 • Number of tool slots: 2 x 16 stations • Main electronic connection: Transformer 95 kVA • Chip conveyor: Yes • 4 x angel live tools will follow • 6 x straight live tool holder will follow • 2 x angel C4 Capto live tool holder will follow • 10 x capto fix tool holders will follow • Possible to buy also robot solution • Well maintained • Only running stainless steel since day one • Chuch high/low pressure both spindles Iedpfxozkrqye Ai Rjtk • Spindle 2 tailstock spec • 7 MPa high pressure Knoll system • Coolant gun • Coolant float switch • Chuck top coolant both spindles • Airblow for tool tip both turrets • Airblow for chuck spindle 1 • Oil skimmer • Autodoor • Robot IF • Ethernet IF • Safety fence IF • Barfeeder IF • 10 external M codes • Handwheel • Spindle orientation both spindles • Text engraving function • High Speed canned cycle • Program restart • Island open pockets • 1 mB storage • Additional workpiece coordinate 48 sets • Tool offsets 200 sets • Swing over bed = 800 mm • Swing over cross slide 800 mm • Maximum distance between nose 1130 mm • Max turning diameter 320 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2011, condition: ready for operation (used), A complete Facma/Cerquetani hazelnut harvesting and processing line for processing hazelnuts from crop reception through sorting, cleaning and grading is available. 1) Facma hazelnut harvester. 2) Ditta Cerquetani Antonio collection and transport trailer. 3) Facma combined processing, cleaning, rotary screen and screening unit. 4) Facma washing and wet cleaning unit. 5) Drying system with drying silo, blower and electrical control cabinet. 6) Facma inclined conveyor with feed hopper. 7) Facma horizontal conveyor and selection belt. 8) Facma sorting, inspection and grading table. Including various peripheral equipment and accessories. Documentation available. Inspection on site is possible. Iodpfxjznx Nds Ai Rotk