Used Sahinler Plate Rolling Machine for sale (73,271)

Condition: used, functionality: fully functional, Year of construction: 1971, For sale: this four-roll plate rolling machine, type VRM HY 3000/18. The machine is connected and can be tested. Weight: 24,000 kg. Hedpfsxwqdrox Al Sel

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Automatic bending machine Co.ma.l Four Matic - 4 rolls (2 with diameter 30 mm / 2 with diameter 37 mm) Hedpfsxdr Skex Al Sol - Effective bending length: 500 mm - Minimum bendable diameter: 40 mm - Automatic cycle management - Pedal operation - Digital position display Machine has been used very little and is in good preservation condition. Original documentation and user & maintenance manual are available.

Condition: new, Year of construction: 2023, neu 2023 Hsdpfxewira Ue Al Sol 9656 prompt, Zwischenverkauf v Türkei 2400 € 1 1 1050 mm 1 mm 56 mm 1400 mm 700 mm 1120 mm 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € 1050 mm 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN Hjdpswirv Nsfx Al Sel

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Hodpfexnmb Isx Al Sol Model Famar CPI4/6 CAPACITY plate width 4000 mm plate thickness 8 mm pre-bending 6 mm --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 Hjdew Dnd Sspfx Al Ssl -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Hedsw Hpzwepfx Al Sel Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: used, functionality: fully functional, Year of construction: 1984, Max. bending length: 3150 mm; Max. sheet thickness: 16 mm; Min. inner diameter of rolled tube: 550 mm; Rolling speed: 7 mm/min; Roll adjustment speed: 2x22 mm/min; Machine dimensions (L x W x H): 7900x1930x2500 mm; Machine weight: 46,800 kg. Hjdpfx Aoxxvlkjl Sel

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hodpsw Slctsfx Al Sjl Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale Hodewk Rlxjpfx Al Sjl manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Year of construction: 1983, condition: used, machine/vehicle number: 3604.1, Clamping surface for workpiece device: 230 x 500 mm Hedpfocxb Nmox Al Ssl Installation height between table and punch holder adjustable: 160 - 400 mm Projection to the center of the punch: 130 mm Stamp working stroke: 40 - 250 mm Punch pressing force max .: 40 kN Stamp speed: 7.5 m / min max.working stroke: 2300 / h electr. Connection: 380 V, 1 kW Weight approx .: 620 kg Required space: 1030 x 850 x 2060 mm

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Hsdpfx Alsfnk Ehs Sol Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,430 mm, travel distance Z-axis: 800 mm, spindle speed (min.): 2,500 rpm, spindle diameter: 150 mm, travel distance W-axis: 1,400 mm, table load: 20,000 kg, table length: 2,000 mm, table width: 2,000 mm, year of last overhaul: 2024, JUARISTI TS5 MG20 boring machine, in perfect working condition, equipped with HEIDENHAIN 530, chip conveyor, enclosure, and milling head. Hjdpfjy Ia Epjx Al Ssl

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Continuously variable working speed: 3–15 m/min Stop skirt Hodpsy Iha Usfx Al Sjl 1 set of rollers Forward/reverse operation via foot switch

Condition: excellent (used), Year of construction: 2004, control type: CNC control, controller model: Siemens, number of rollers: 4, roller (top) diameter: 12 mm, side roll diameter: 14 mm, working width: 3,100 mm, sheet thickness (max.): 14 mm, overall weight: 12,000 kg, total length: 5,000 mm, total width: 1,900 mm, total height: 3,900 mm, 4 roll plate bender HAEUSLER - VRM-HY 3000 x 14 MACH-ID 9611 Make: HAEUSLER Hjdpfxey H A Uqo Al Ssl Type: VRM-HY 3000 x 14 Control: Siemens Rolling width: 3100mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 10mm Number of rolls: 4 Rolling speed: 0-5 Top support: yes Length: 5000mm Width: 1900mm Height: 3900mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Hjdpfx Aju Tg Spel Sel Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction Hodpfx Aljwka Upo Ssl - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, working width: 300 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 05/2027, type of input current: three-phase, conveyor belt width: 300 mm, year of last overhaul: 2024, Lippelt Mini Rustica Roll Line For all types of specialty rolls Stainless steel construction Hodpfjy H Utlsx Al Ssl Simple and efficient production of square dough pieces Robust engineering Connection: 400V, 16A-CEE plug Dimensions approx.: L 2300 x W 750 x H 1370 mm Used machine We have more bakery machines in stock for you!

Condition: used, Rolling Machine Hsdpfx Alewf Ndie Ssl Brand: JAMMES PROMECAM Type: HC 1310 Maximum thickness: 10 mm Maximum length: 3040 mm Rolling capacity: 1500 mm Upper roller diameter: 300 mm Side roller diameter: 220 mm Working speed: 0 to 7 m/mm Hydraulic control 1 hp motor Hydraulic unit motor: 5.5 kW Weight: 7000 kg Dimensions: 5100 x 1000 x 1000 mm Type: 4-roller rolling machine

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hedpfx Alsv Htnio Sol Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Hjdpfxjy Expus Al Ssl Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), workpiece weight (max.): 80,000 kg, grinding diameter: 1,580 mm, grinding length: 7,500 mm, Manufacturer: Farrel Type: 60" x 24" Heavy Duty Year of manufacture: 1960 Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Specifications Metric US Standard Center height 930 mm Grinding diameter Ø 1860 mm Grinding length 7500 mm Grinding stone dimensions 1080 x 180 mm Grinding stone speed 400 - 100 rpm Tailstock 260 x 1250 Mk Coolant system Yes filter Yes Dimensions (estimate) length 13200 mm width 4250 mm height 3200 mm weight 80000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Share on download Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanges / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930mm Grinding diameter Ø: 1860mm Grinding length: 7500mm Grinding stone dimensions: 1080 x 180mm Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 13200mm Width: 4250mm Height: 3200mm Weight: 80000kg Aluminum Industry Non-Ferrous Industry Paper Industry Hodpfx Aler Ikvme Ssl Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930inch Grinding diameter Ø: 1860inch Grinding length: 7500inch Grinding stone dimensions:1080 x 180inch Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 519.684inch Width: 167.323inch Height: 125.984inch Weight: 176449.6lbs Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Manufacturer: Farrel Type: 50x14 CNC Control: NUM 760 Year of construction: 1970 Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x Stones and Flanches included Specifications Metric US Standard Center height 647 mm Grinding diameter Ø 1295 mm Grinding length 4267 mm Grinding stone dimensions Hodpfsv Dia Aox Al Sjl 914 x 152 mm mm Grinding stone speed 400 - 1200 Rpm Coolant system Yes Dimensions (estimate) Length 8500 mm Width 4500 mm Height 3200 mm Weight 78000 kg Please note: The information on this page is believed to be correct and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC Hsdpfx Asy Ez A Rjl Sel - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine Hedpfxeyuty Ss Al Sel used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee