Used Schorr Ant for sale (4,156)

Condition: good (used), Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Tennant, Permanent Magnet Motor Type 377425 -Power: 0.74 kW -Speed: 2200 rpm -Voltage: 36 V -Gearbox: Regal-Beloit 7722703-SJ -Translation: 7.5 : 1 -Shaft: Ø 19 x 35 mm Psdpfx Aisfv Ap Nsrogt -Dimensions: 395/210/H195 mm -Weight: 21 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Transfer: in the current condition as seen -Face plate: without jaws -Chuck size: Ø 770 mm -Shot: short taper 11 -Hole circle: Ø 235 mm -Through hole: Ø 120 mm Pgjdpfsfz Rd Usx Airot -Groove width: 24 mm -Weight: 234 kg

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer of transmission: Atlanta, type 58 44 215 i 14.5 -Power: 2.45 kW / n1 1500 rpm -Motor manufacturer: Siemens, type 1 FT5072-OAFO1-2 / Brake 1 FU1050-6GF -Motor: 150 V / 10.0 Nm //3000 rpm -Hollow shaft: Ø 38 x 125 mm -Shaft: Ø 16 x 40 mm Pgedpjgypu Iofx Airjt -Dimensions: 540/275/H230 mm -Weight: 29 kg

Condition: used, Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, driven tool, bar gripper, thread cutting head Pgsdpfjgl Dutox Airjt -Manufacturer: Sandvik, 17 pieces turning tools with tool stand -Socket: Ø 40 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/660/H500 mm -Weight: 25.6 kg

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 5,600,000 kW (7,613,872.00 HP), continuous power (apparent): 700,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. Pgedpfx Asrdzg Heirst The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures.

Condition: good (used), The scope of delivery includes: 01x square tube, used Material color: sendzimir galvanized Total height: approx. 5,560 mm Square profile: 140 x 140 mm Material thickness: 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm Note: Some of the square tubes are doubled at a height of 4,910 mm or 5,010 mm are doubled up. Pedpfx Aierxb R Nsregt Currently available from stock: approx. 101 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill, shell end mill, 2 pieces -Type: H 75Ø x 35 x 27 mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Price: complete -Dimension: Ø 75 x 35 x 27 mm Pjdpfxsh Tk Ddo Airsgt -Weight: 0.7 kg/pc.

Condition: used, Year of construction: 1963, machine/vehicle number: 418, 1-Zangen Klebebinder - 1-Clamp Perfect Binder W. Gantenbein BAFC 33Year 1963 - Serial-No. 0418 1 Clamp hotmelt binder Block back roughing Pgjdsh Aw T Aspfx Airst with suction Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Quick Snap brush segment, brush, plastic brush, nylon brush -Manufacturer: Tennant, brush, 20" nylon with plate, unused, original packaging Pgedegtu Ubepfx Airot -Type: 14967 Disco 20" D=500 -Number: 2x brushes available -Price: per piece -Dimensions: Ø 500 x 110 mm -Weight: 6 kg/piece

Condition: as good as new (ex-display), Year of construction: 2015, We have a Xante Impressia digital printing system available. The Xante Impressia printing system is specially built for printing envelopes! System can also print documents of course ranging up to A3 and 300 gr/m2! This Xante Impressia just came in. Year is 2015 and counters are 317.152 color and 19.901 prints black. but the printer is in good working condition. Of course all the drums and toners are in the machine. This is part of the printer. Psdpfx Aisd Tfiuersgt Please contact us to get a hold of this machine for a super discount price!

Condition: good (used), Year of construction: 1998, machine/vehicle number: 98095307, Offer 24271 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0.5 - 3 ° Podpet Tw Uisfx Airsgt - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs. - mot. Rear fence with positioning control 10 - 1000 mm - Front angle fence - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - Pneumatic connection 6 bar - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement incl. back gauge, - approx. W 4050 x H 1600 x D 2450 mm - Weight approx. 5500 kg - with: - E-foot switch - Cutting line lighting - Sheet support - Rear guard with protective grille

Condition: good (used), Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Atlanta, gearbox type 58 83 209 -Translation: i= 9.25 -Shafts: Ø 25 x 135 mm / Ø 15 x 28 mm see photos -Dimensions: 220/137/H165 mm Pjdpfjt Iyuhex Airjgt -Weight: 7.3 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Pgjdpfx Aoq H Shcoiret Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Year of construction: 2000, condition: good (used), Vitronics Soltec reflow oven, type: 6638 Quantis Pro Pgodpeq I Shaofx Airjt

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. Pedpjq Ngb Djfx Airsgt 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: Pgedeq Nyuvopfx Airst - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Year of construction: 2012, condition: good (used), Motor grinding spindle, grinding spindle, high-performance grinding spindle, spindle head -Manufacturer: Santenberg, spindle head from CNC machining center GTC S 2 Podpfx Aijkyy T Njrsgt -Hydraulic Tensioner: : Kitagawa SS1246K / S1246 -Dimensions: see photos -Number: 2x spindle head available -Price per piece -Dimensions: 830/390/H260mm / 840/350/H280mm -Weight: 110kg / 115kg

Condition: good (used), HANG 114-00/4 paper drill The device is in very good condition. This is the latest product of the hang brand. The highest class of machines among drilling machines.. Waste directed to an external container. Controlled by an electric foot switch. Each head is independently adjustable, which allows the use of drills of different lengths. Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm Pgodpfjztn Dusx Airjt drill spacing max260mm drill speed: 1500 rpm two table lifting speeds table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools and drills.

Condition: new, UNIQUE SPECIAL PRICE DUE TO CUSTOMER CANCELLATION AVAILABLE WHILE SUPPLIES LAST Included in the scope of delivery: 1x Rectangular tube, 2nd quality (new item) Material color: RAL 5010 blue Total length: 3,180 mm ctc: 3,140 mm Borehole diameter: 9 mm Pgedozg T Tbopfx Airot Cross-section: 50 x 40 mm Material thickness: 2.0 mm Weight: 8.39 kg | each Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, tubular heating element -Manufacturer: Kanthal, electric tubular heating element -Type: 17 spirals -Dimensions: see photos -Overall dimensions: 40/340/22 mm Psdpfxszd Acto Airjgt -Weight: 6.3 kg

Condition: like new (used), Garant reference standard for multi-sensor measuring machines. Pgedpfozkipajx Airot

Condition: new, functionality: fully functional, machine/vehicle number: 15162333, empty load weight: 620 kg, maximum load weight: 2,380 kg, overall weight: 3,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,500 kg, permissible axle load (axle 2): 1,500 kg, loading space length: 4,150 mm, loading space width: 2,050 mm, loading space height: 350 mm, total length: 5,565 mm, total width: 2,100 mm, tire size: 13 Zoll, tire condition: 100 %, trailer brake: trailer braked, Year of construction: 2026, Loading dimensions approx. 2050 mm x 4150 mm External dimensions approx. 2100 mm x 5565 mm Permissible total weight: 3000 kg Payload: approx. 2380 kg (payload may vary depending on additional equipment) Manufacturer: Variant Special features - Variant High-loader Pro Line 3021 P4 - 350 mm aluminium drop sides (foldable/removable) - 10 lashing eyes in the floor frame profile, rubber-coated, 500 daN (kg) - Toolbox mounted (front right side under the loading area) - Ramp compartment (ramps not included, available as accessory) - Removable steel corner posts - Removable H-frame - Vehicle registration documents included Pgodpfx Aiey I Tnqjrot Additional equipment - Flooring: phenolic resin-coated non-slip and waterproof plywood - Welded steel frame - Reinforced cable (spiral cable) - Internal long lever fasteners Chassis - Knott rubber torsion axle | V-drawbar with ball coupling | heavy-duty automatic jockey wheel | automatic reverse system Electrics - 12 Volt | 13-pin plug | side marker lights | position lights

Condition: new, diameter / mm Cutting (quantity) / 0 weight / kg Atlanta 58 83 907 servo worm gear NEW packed. Type: 58 83 907 n1: 5000 rpm Pgjdpeymquwefx Airst P: 5.20kW

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Versant 3100’ colour production system Items for sale: 1 x Xerox Versant 3100 with the following specifications: Includes Fiery Server Pro Includes A-CF03 paper tray Includes 2 x LCS-1 stackers Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,924,459 pages Colour: Approx. 2,647,224 pages Black: Approx. 277,235 pages Pgjdpfx Aezaqg Hoiret Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen. Pgjdpfx Aszhi Uqjirst