Used Scm Panel Sizing Circular Saws for sale (31,193)

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016. Cgsdpfxsy Dtpmj Appju

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Cutting plane directly on the saw blade Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life; 6-year HOLZKRAFT warranty on wear of the swivel segments Precision-guided format sliding table made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the sliding table guide rails Parallel fence as standard with round bar guide and fine adjustment Large work table made of milled cast iron Smooth operation and precise cuts Standard table extension and table lengthening enable easy work with larger workpieces Extendable aluminum telescope fence with angle adjustment and two professional folding fences Made in Italy Motor 4.0 kW - 400 V Saw blade tilt 90 - 45° Format sliding table length 1600 mm Cgedpfxjwb Eh Ne Appju Table length 1020 mm Table width 325 mm Cutting width with parallel fence 700 mm Max. cutting height 90° = 100 mm Max. cutting height 45° = 79 mm Saw blade diameter 315 mm Saw blade speed 315 mm Max. crosscut width to the left of the saw blade 1660 mm Scoring saw blade diameter 80 mm Scoring saw blade speed 7600 mm Weight: approx. 276 kg Note! The parallel fence and table extension on the right are not visible in the pictures. Availability: short-term Location: Flörsheim

Condition: good (used), Code: 0393 Brand: ALTENDORF Model: DUPLEX Bevel guide for panel saws ALTENDORF Features: Continuously adjustable angle from 0 to 90° for high-precision mitre cuts The guide can be positioned at any point along the carriage The stop features a scale with 1/4 degree graduations that is perfectly legible thanks to a magnifying lens Cedpjy Ufb Nefx Appegu The folding guide with 2 stops can be used on both sides and allows for cutting to size up to 1350 mm

Condition: excellent (used), HOLZMA HPP 530 PROFI LINE panel saw, in very good condition, with a cutting length of up to 3690. Cjdpey Uk D Aefx Appsgu

Condition: excellent (used), AGT Combination table saw and miter saw - Cutting width: 380mm Cjdpsy Tmgksfx Appjgu - Cutting height: 85/40mm - Weight: approx. 50kg - Tilting and swiveling

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Codoy S Dwwjpfx Appsgu Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 72.250/01, saw blade diameter: 125 mm, saw drive: 1,500 W, PLC control: MAGELIiS 125 mm saw blade Motor power: 1.5 kW Saw feed rate: 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 - 1885 m/min (non-ferrous metals) Max. working area: 70x40 mm (steel) Max. working area: 60x40 mm (non-ferrous metals) Circular working range: 5 - 70 mm (steel) Circular working range: 5 - 50 mm (non-ferrous metal) Feed length: 5 - 500 mm 5-9999 (multi-step) Max. feed speed: 500 mm/s Weight (saw): approx. 610 kg Dimensions (length x width x height) (saw): approx. 2500 mm x 1000 mm x 2000 mm Cgodjy U Na Aopfx Appeu Automatic bar feeder. NOTE If the Buyer decides to purchase this machine, the Seller will disassemble the machine and load it onto the provided transport vehicle free of charge!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Cutting length: 4500 mm Cutting depth: 2200 mm Blade overhang: 95 mm Main blade unit Scoring blade unit Number of clamps: 9 1 front table with air cushion system 3 front tables with air cushion system Control system: Biesse OSI Plus Label printer Rear lifting table Cgsdpfszaah Tsx Appju Available at the end of July.

Condition: excellent (used), CATALOGUE NUMBER: 8007 TECHNICAL DATA - max. diameter of the main saw blade (without scoring saw) 400mm - max. diameter of the main saw blade (with scoring saw) 300mm - diameter of the saw blade arbor 30mm - max. cutting height for 400/300 saw blade, 120/70mm - spindle lock - main saw blade adjustable up/down and at an angle - saw blade guard - with side carriage - cutting length on the carriage 1600mm - cutting width with guide 1360mm - table dimensions 1100x1020mm - table dimensions with extension, including extension 2050x1850mm - with scoring saw - max. diameter of the scoring saw 100mm - diameter of the scoring saw spindle 22mm - scoring saw motor 0.55kW - 3 types of rotation speeds 2800, 4000, 5000 rpm - main motor 5.5kW - with brake - diameter of the dust extraction outlet 80, 120mm - dimensions (L/W/H) 2400x3350x1500mm - weight 870kg Cgodpfx Asy T Rhfeppsu ADVANTAGES - Polish production - saw blade guard - with scoring saw - used saw, very good condition Net price: 11900 PLN Net price: 2833 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8006 TECHNICAL DATA - max. diameter of the main saw blade with scoring blade: 350mm - max. diameter of the main saw blade without scoring blade: 450mm - cutting height with installed 350mm blade: 100mm - electric adjustment of the main blade up/down + angle - electric angle display - electric adjustment of the scoring blade up/down, left/right - spindle diameter: 30mm - spindle locking - with a rip fence carriage - cutting length on the carriage: 3400mm - cutting width with the guide: 1300mm - with a side carriage - with a scoring blade - max. diameter of the scoring blade: 120mm - spindle diameter: 22mm - scoring blade motor: 0.75kW - main motor: 5.5kW Csdpfxoy T N Auo Appogu - 4 types of blade speed - electronic speed display - dust extraction port diameter: 120mm, 80mm - table dimensions: 1220x730mm - table dimension with extension: 1440mm - table dimension with extension: 2060mm - blade guard - dimensions (L/W/H): 3550x3400x1500mm - weight: 1140kg ADVANTAGES – electric adjustment of the blade and scoring blade – with original angle guide – carriage length: 3400mm – made in Germany – unpainted – used saw, very good condition Net price: 38,900 PLN Net price: 9,260 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number: 7996 TECHNICAL DATA - max. main blade diameter with scoring blade: 400mm - blade bore diameter: 30mm - max. cutting height: 120mm - main blade adjustable up/down + angle - blade guard - with a sizing carriage - cutting length on the carriage: 3200mm - cutting width with guide: 1270mm - with a side carriage - with a scoring blade - max. scoring blade diameter: 120mm - spindle diameter: 20mm - scoring blade motor: 0.75kW - main motor: 5.5kW - 2 types of rotational speeds: 4000, 6000 rpm - dust extraction nozzle diameter: 75mm, 100mm - table dimensions: 1060x640mm - table dimensions with extension and widening: 1660x1550mm - dimensions (L/W/H): 3350x3470x1400mm - weight: 770kg ADVANTAGES Csdpfx Apey T Ntaspegu – clamping bar included – with table extension and widening – unpainted – used saw, very good condition Net price: 16,900 PLN Net price: 4,030 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 1998, saw blade diameter 450 mm cutting diameter 150 mm capacity 90 degrees: flat 330 x 40 mm capacity 45 degrees: round 140 mm capacity 45 degrees: flat 250 x 40 mm Csdov Hth Ajpfx Appjgu cutting speed 10 - 70 m/min saw head feed 0 - 1000 mm/min sawing motor 1,7 / 2,6 kW weight of the machine ca. 1,1 t Accessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, ingoing roller track 7000 mm, outgoing roller track 4000 mm

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 total power requirement 5,5 kW Cjdpfx Apjv Hhrvspjgu weight of the machine ca. 1,8 t dimensions of machine L x W x H 2,45 x 1,20 x 2,00 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm cutting range - square - 120 x 120 mm cutting range - flat - 300 x 40 mm capacity 45 degrees: round 130 mm Cgjdpfxetqqrzj Appju capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 245 x 40 mm mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min control minipos 807 total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Condition: good (used), Year of construction: 1979, machine/vehicle number: 3297, functionality: fully functional, CIRCULAR SAWING MACHINE WITH MULTI-STAGE GEARBOX TYPE: 1631 MACHINE NO.: 3297 Cgsdpfey S Sxcex Appeu YEAR OF MANUFACTURE: 1979 Technical Data: Table size: 675 x 500 mm Minimum distance from saw mandrel to top edge of table: 60 mm Height adjustment: 50 mm Maximum saw blade diameter: 300 mm Minimum saw blade diameter: 160 mm Saw blade arbor holes: 32 mm and 40 mm Maximum table travel: 200 mm Maximum cutting height: 87 mm Maximum cutting width to the side of the saw blade: 300 mm Standard motor power: 1.5 hp Height from top edge to table: 885 mm Space requirement: 700 x 900 mm Weight: approx. 197 kg Condition: good, functional

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Cgjdjvxr Thjpfx Appeu

Condition: used, Year of construction: 1966, functionality: fully functional, cutting height (max.): 2,800 mm, cutting width (max.): 5,600 mm, saw blade diameter: 305 mm, total width: 6,000 mm, total height: 2,850 mm, overall weight: 550 kg, For sale is a fully functional and robust vertical panel saw by the quality brand Striebig. The machine runs perfectly and cuts at angle. Ideal for craft businesses, workshops, or ambitious DIY enthusiasts. Year of manufacture: approx. 1966, Frame height: approx. 2,850 mm, Frame width: approx. 6,000 mm, Working length: approx. 5,600 mm, Working height: approx. 2,100 mm. Cgsdpsy St Npofx Appsu The panel saw is sold as is. Dismantling will be carried out by us, transport must be completely organized, carried out, and paid for by the buyer. This is a private sale; warranty, guarantee, and returns are excluded.

Year of construction: 1989, condition: ready for operation (used), A longitudinal circular splitting saw is offered. Saw blade Ø: 400mm, cutting length: 400mm, cutting depth: 130mm, integrated coolant system, swiveling saw head for miter cuts, manual feed, base cabinet. Inspection possible by arrangement. Cjdjy Tat Ropfx Appjgu

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA Cgjdpfx Apey Tw Skjpju - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7918 TECHNICAL DATA - Max. saw blade diameter: 450mm - Spindle diameter: 30mm - Pneumatic top clamp - Blade guard - Blade guard also functions as a hold-down clamp - Pneumatic blade feed - Cutting height (at 250mm width): 120mm - For lower cutting heights, the cutting width is increased - Main motor power: 6kW - Extraction nozzle diameter: 120mm - Table dimensions (LxW): 650x850mm - Table height from base: 1000mm - Roller tables: - Infeed roller table + stop: 3180mm - Outfeed roller table + stop: 2450mm - Roller width: 360mm - Operating pressure: 8 bar - Overall machine dimensions (without roller tables) LxW xH: 1300x1050x1800mm - Weight: 550kg FEATURES – 2 roller tables – Pneumatic blade stroke – Used saw, in perfect condition Net price: 14,900 PLN Net price: 3,550 EUR (based on EUR rate of 4.2) (Prices may change with significant rate fluctuations) Cjdpey Tw Ixjfx Appegu

Condition: excellent (used), Paoloni P 300 Panel Saw with Scorer | 3200mm Carriage, Italian, 790kg Description: For sale is a professional, classic panel saw from the renowned Italian manufacturer PAOLONI, model P 300. The machine features a very heavy, cast iron and steel construction (weighing a substantial 790 kg), which ensures excellent stability, geometric rigidity, and superior vibration damping during operation. This is a proven, mechanically reliable design without unnecessary, failure-prone electronics – ideal for use in artisanal carpentry workshops and for furniture production. ⚙️ TECHNICAL DATA FROM THE NAMEPLATE: Manufacturer: Paoloni (Fano - Italy) Model: P 300 Year of manufacture: 1997 Serial number: 0602 Supply voltage: 380 V (Three-phase) Frequency: 50 Hz Motor power (KW): 4.75 kW Current consumption: 11 A Machine weight: 790 kg 💎 MAIN FEATURES AND EQUIPMENT: Long Aluminum Panel Saw Carriage: Provides smooth, effortless feed and high cutting precision. The carriage length allows for easy cutting of full-size furniture panels (cutting length approx. 3200 mm). Scoring Unit: Essential for clean cutting of laminated, chipboard, and MDF panels – guarantees no chipping of the material on the underside. Precise Geometry Adjustment: Manual, reliable raising/lowering of the main saw blade and adjustment of the blade tilt angle (in the range of 0°–45°) using an ergonomic wheel with a dial indicator. Cgodpfey Tzqkox Appeu Stable Side Table: Structure mounted on a solid, telescopic support arm, equipped with a long transverse ruler with two stops for series cuts. Parallel Guide: Solid mounting on a thick, steel rod, ensuring repeatable dimensions on the right side of the blade. 📐 OPERATING PARAMETERS (Standard for the P 300 series): Cutting length: approx. 3200 mm Cutting width with the right guide: approx. 1150 mm Maximum main blade diameter: 300 mm - 350 mm Cutting height: up to approx. 100 - 115 mm (depending on the installed blade) 🛠️ TECHNICAL CONDITION: The machine is complete, in good visual and technical condition. Ready for immediate use in the workshop.

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, cutting length (max.): 3,000 mm, cutting height with scoring (max.): 40 mm, cutting width at rip fence: 1,250 mm, trimming length: 3,000 mm, Equipment: saw blade guard, - Austrian-made - With scorer TECHNICAL SPECIFICATIONS: - Table carriage length: 3000 mm - Max. main blade diameter (without scorer): 315 mm - Max. main blade diameter (with scorer): 250 mm - Blade bore diameter: 30 mm - Max. cutting height with 250 mm blade: 40 mm - Spindle lock - Main blade adjustable up/down and at an angle - Blade guard - With carriage - Cutting width at the fence: 1250 mm - Main motor: 4 kW - Fence with latch: 1700 / 2600 mm - Scorer Cgodpexm Rm Ssfx Appju - Max. scorer blade diameter: 80 mm - Scorer spindle diameter: 20 mm - Scorer motor: 0.65 kW - Extraction port diameter: 100 mm - Shipping dimensions (L/W/H): 325 / 190 / 130 cm - Weight: 500 kg

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, – Austrian production – year of production: 2005 – X-Roll carriage guide system – Operation manual DTR and CE TECHNICAL SPECIFICATIONS: – Carriage length: 2800 mm – Cutting width (right side): 1250 mm – Main blade diameter: max. 315 mm – Scoring unit diameter: 100 mm – Main motor: 4 kW – Scoring motor: 0.75 kW – Brake – X-Roll carriage guide system – Cutting height adjustment Cgodpfey Awwljx Appju – Manual angle adjustment: 0° - 45° – Max. cutting height: 104 mm – Option for installing milling cutter, thickness: 6 - 20 mm – Max. diameter: 180 mm – Pawl – Moving guard – Dimensions (L/W/H): 300 / 195 / 170 cm – Weight: approx. 700 kg

Condition: good (used), Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Csdpfsy A Svpex Appjgu Main rotation speed 3900 rpm Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300

Condition: excellent (used), functionality: fully functional, MZ Project CS 1000 Optic – Longitudinal cutting saw Cutting width: 1000 mm Cutting height: 100 mm Cutting speed adjustment: 0-25 m/min Saw blade diameter: 550 mm Motor power: 10 kW Codpfx Apjy Ugkfepogu