Used Scm Planer And Moulder for sale (8,225)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: AE/020112, total width: 1,300 mm, overall weight: 2,750 kg, number of rollers: 4, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Overall width: 1,300 mm Electrical data Rated voltage: 400 V Frequency: 50 Hz Phases: 3 ~ Rated current: 180 A Short-circuit current: 10 kA Max. load current: 420 A Weight: 2,750 kg Lrjdpfx Aaexmhiws Ror EQUIPMENT Two rollers at the top Two rollers at the bottom Note: The machine was dismantled as part of a liquidation and is loaded onto a truck. The machine was fully operational at the time of dismantling.

Condition: like new (used), working width: 1100 mm unit with steel roller 2nd unit rubber with pad Ledpfxex H Rq Hs Aa Rerr motor power: 11 kW oscillation via photocells 2 conveyor feed speeds pad automatically triggered with adjustment units switched on from the control panel material thickness sensor year of manufacture: 2002

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts Ledpsxqggcefx Aa Rjrr All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 Lsdpfx Aaozuzfhj Rerr - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, workpiece width (max.): 1,200 mm, number of slots in tool magazine: 6, overall weight: 2,500 kg, Vertical drilling, routing and grooving CNC machine ideall for furniture production. Model: Morbidelli CX210 Lrodpfx Ajzutgwja Rer Manufacturer: SCM Group Production year: 2021 State: very good Weight: 2.560 kg Panel´s working dimensions: - min. dimensions: 200 x 50 x 8 mm - max. dimensions: 3.050 x 1.300 x 95 mm 3 axis electrospindle + 6 pos. toolchanger - tool attachement: HSK 63F - RPM: 1.500 - 24.000 /min. - power: 6,6 kW Drilling head F31LTC (RO.AX) - vertical spindles: 21 pcs - horizontal spindles: 3+3 in X, 2+2 in Y - 1x saw blade in X - 1x drilling head for hinges 45/9,5mm (can be changed for different type) Other equipment: - control panel Eye-M with touchschreen (21"), Windows 10 - 2 independent clamps - 3D probe for detection of precize panel´s dimensions (length, width, thickness) - control PC - Maestro Active + Maestro CNC - remote controller - automatic lubrication Machine availability: September 2026 It is possible to see the machine in run.

Condition: good (used), Year of construction: 2005, machine/vehicle number: AA1/014879, functionality: fully functional, input voltage: 400 V, input current: 106 A, input frequency: 50 Hz, type of input current: three-phase, We offer this very good SCM RECORD 110 AL machining center, year of construction – 2005. Serial number: AA1/014879 Machine number: 2966282040H Reference: 052635 Supply voltage: 400 V Number of phases: 3 Operating current: 106 A Short-circuit current rating: 10 kA Frequency: 50 Hz TECHNICAL DETAILS Processing type: Drilling, milling Lredjzua Tdepfx Aa Rer Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel passage: 200 mm Number of working fields: 2 Table type: Flat table Table configuration: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: top Controlled axes: 5 Spindle cooling: liquid cooling Grooving unit Number of grooving units: 1 Installation position: top Design: fixed grooving unit Grooving direction: X-direction If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2011, Usable working width: 520 mm Thickness table dimensions: 520 x 900 mm Max. working height: 300 mm Min. working height: 3.5 mm Min. workpiece length: 220 mm Max. material removal: 8 mm Lrodpfezimbdsx Aa Rsr Cutterhead diameter (number of cutters): 120 mm (4 pieces) Cutterhead speed: 4500 rpm Feed rate: 5-8-12-18 m/min Motor power: 7 kW Dust extraction port diameter: 150 mm Dust extraction volume: 1300 m³/h Weight: approx. 680 kg Dimensions: 1150 x 1100 x 1250 mm Storage location: Garbsen

Condition: used, Year of construction: 2004, functionality: fully functional, On offer: SCM SI 300 S panel saw – with scoring saw, blade up to Ø400 mm The machine is used, has undergone a technical inspection, is in fully working order, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its separately driven and adjustable scoring saw, and the possibility of using a main blade with a diameter of up to 400 mm. Manual adjustment of the blade height and tilt angle allows the machine to be adapted to the cutting task, while the maximum workpiece length of 2700 mm allows for convenient formatting of larger parts. Lsdpfx Ajzubfhsa Rjrr Specifications: • Manufacturer: SCM • Model: SI 300 S • Year of manufacture: 2004 • Main motor power: 4.0 kW • Scoring saw motor power: 0.75 kW • Saw blade speed: 4000 rpm • Scoring saw speed: 8500 rpm • Diameter of the currently installed blade: Ø300 mm • Maximum blade diameter: Ø400 mm • Maximum cutting height with Ø300 mm blade and 90° angle: 85 mm • Maximum cutting height with Ø400 mm blade: 97 mm • Manual blade height adjustment • Manual blade tilt angle adjustment: 90–46° • Scoring saw adjustable manually up/down and side to side • Table length: 1600 mm • Table width: 350 mm • Maximum workpiece length: 2700 mm • Maximum cutting width to fence: 1030 mm • Dust extraction outlets: Ø120 mm and Ø60 mm • Weight: 590 kg • Working table height: 900 mm • Overall dimensions: 240 × 320 × 157 cm (L × W × H, with side trolley and dust extraction hose) Applications: • Formatting of wood-based panels • Cutting solid wood • Trimming parts to a specified dimension • Performing straight and miter cuts • Cutting laminated boards using the scoring saw • Processing parts up to 2700 mm in length • Preparing material for further processing steps Additional information: • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of transporting the machine.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AH/109736, functionality: fully functional, input voltage: 400 V, edge thickness (max.): 2 mm, height adjustment type: mechanical, overall weight: 250 kg, Equipment: CE marking, machine in excellent condition, used very little practical and versatile edge gluing machine for carpenters Lrodjzvmygepfx Aa Ror for straight edges for angled edges particularly suitable for edge banding of shaped parts READY FOR OPERATION

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 _ _ _ Working width: 1100 mm Ledoxp Ecyspfx Aa Rerr 1st group: steel roller 2nd group: rubber roller 3rd combined group: roller/pad Motor power: 2 x 15 kW

Condition: used, Year of construction: 2006, Tree 50mm Lredpfx Aszr R Dnja Rjr Long tables Front-mounted table extension Trainer 3 rollers 380V

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: AE/033731, functionality: fully functional, cutting height (max.): 60 mm, saw blade diameter: 300 mm, rotational speed (min.): 4,650 rpm, overall weight: 3,006 kg, table height: 950 mm, Panel Saw – Technical Specifications Regarding the Casadei Busellato AXO 200 automatic panel saw, its key technical specifications are as follows: Lodszkbhzopfx Aa Rerr Parameter Value Cutting length 3800 Max. blade extension 60 mm Main motor power 9 kW Scoring saw motor power 1.3 kW Number of clamps (standard) 6 Main blade diameter 300 mm Scoring saw diameter 160 mm Main blade rotation speed 4650 rpm Scoring saw rotation speed 5850 rpm Work table height 950 mm Zebra GK4 20T label printer The machine is designed for cutting: MDF, particleboard, plywood, laminates, and other wood-based materials. The structural features include a rigid steel frame, a CNC-controlled automatic pusher, an air cushion table that facilitates the movement of panels, and the possibility of expansion with additional clamps and cut optimization. The saw will be in continuous operation on a part-time basis (1/4 of full-time) until the end of October 2026. Assistance will be provided with loading the saw. Disassembly for transport: 500 Euros. Loading onto a truck: 300 Euros.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Working area X: 3600 mm Working area Y: 2200 mm 4-axis electrospindle, HSK 36F shank Vertical drilling bits: 12 Horizontal drilling bits X: 4 Lodpfx Aaszwc Nms Rorr Horizontal drilling bits Y: 2 Blade for grooving in the X direction Linear tool changer with 20 positions Nesting table Software: Xilog Plus and Maestro CNC Control panel 2 vacuum pumps, 250 m3/h each Approximate weight: 5000 Kg Includes 1 unit with 2 outlets, and 6 suction cups Available: January 2027

Condition: like new (used), Year of construction: 2003, I sell the panel beam saw SCM Sigma 85KC. Year 2003. Cutting size 3300x3200mm. Cutting height 85mm. Main motor 7,5kW Scoring motor 1,1kW Total power 10kW Total area covered W.5400mm x D.7000mm Ljdpfjzvhy Ijx Aa Rerr 5 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Very good condition. Available immediately.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Thickness planer Manufacturer: SCM Model: S 50 Motor: 5.5 kW 4 cutter blocks Feed rate: 7.5 - 25 m/min Lrsdpozncr Aofx Aa Rjr Planing width: 500 mm Planing height: 240 mm 2 rollers in the table

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Veneering press equipped with automatic loading/unloading. Manufacturer: SCM Group (division SERGIANI) Lsdpfx Aszutpxsa Rjrr Model: SERGIANI GS-A 6/120 30-13 PM Production year: 2020 Machine state: like new Main technical parameters: - platens dimensions: 3.000 x 1.300 mm - overall thrust: 120 tons - number of pistons: 6ks (diam. 85 mm) - max. opening: 120 mm - oil boiler consumption: 36kW Main features: - solid-steel drilled platens - oil heating with electric boiler (max. 120°C) - exclusion of left pair of pistons - automatic flatness control - powered pre-loading composition belt (3.000 x 1.300 mm) - unloading grafity table with rollers - automatic loading/unloading system Programator: - control panel with touchscreen LCD (size 15 cm) - setting of pressing working programs - setting of pressure, time and temperature - timer for boiler heating start-up Machine immediatelly available.

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm Lrodpfszvb Uxjx Aa Rsr * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 120 mm, TECHNICAL DETAILS Working height: 120 mm Working width: 230 mm Feed rate: 6 / 12 m/min Spindle speed: 6,000 RPM Spindle diameter: 40 mm Lrodpfx Aozrmpmsa Ror Tool diameter, vertical spindle: 100–180 mm Infeed table length: 2,000 mm Motor power 1st spindle, bottom: 5.5 kW Motor power 2nd spindle, left: 11 kW Motor power 3rd spindle, right: 11 kW Motor power 4th spindle, top: 7.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,250 x 1,550 x 1,500 mm Weight: 1,800 kg EQUIPMENT Documentation

Condition: not inspected (used), Year of construction: 2004, functionality: fully functional, operating hours: 3,450 h, input voltage: 400 V, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, total length: 3,500 mm, total width: 2,100 mm, total height: 1,800 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Welcome to Maschinenhandel Knipfer Lrsdpfx Aaoztduvs Rer We would be happy to arrange a viewing of the machines on our premises by appointment. Since someone is not always on-site, please call or send a message in advance. ━━━━━ SCM SI 450 Vanguard A very nice panel saw with top-notch features! The machine is located in 92353 Postbauer-Heng. - Approximately 3,500 operating hours - Parallelogram support table - All axes CNC controlled - Scoring unit - Parallel fence adjustable with ball screw drive (high-end solution; it is usually adjusted with a steel bar) - On/off switch on the sliding table - Year of manufacture: 2004 - Including operating manual ━━━━━ IMPORTANT NOTE All information is subject to change without notice. Technical changes are reserved by the manufacturers. Price changes, sales subject to prior sale, and printing errors are reserved. Prices apply for collection. Shipping is possible for an extra charge and by arrangement. A forklift is available for loading.

Condition: used, functionality: fully functional, SCM Mini Max FS410 Jointer-Planer Jointer: Ledpfxjzqdwfs Aa Rorr Working width: 410 mm Total length of tables: 2000 mm Length of infeed table: 1000 mm Cutterhead speed: 5300 rpm Number of knives: 4 HSS knives Maximum cutting depth: 5 mm Fence tilt range: 90°–45° Planer: Table dimensions: 700 × 410 mm Minimum / maximum working height: 3–230 mm Maximum cutting depth: 5 mm Feed rate: 8 m/min Dust extraction port diameter: 120 mm Motor power: 4 kW Total weight: 435 kg Overall dimensions (W × L): 770 × 2000 mm

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 3,710 mm, travel distance Y-axis: 1,620 mm, number of axes: 5, spindle motor power: 13,500 W, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli M100 CNC Wood Machining Centre was manufactured in 2023. It features an impressive X-axis working range of 3,710 mm and a Y-axis working range of 1,620 mm. The machine is equipped with a 5-axis milling unit and a drilling unit with 13 vertical spindles, providing versatile woodworking capabilities. If you are looking to get high-quality woodworking capabilities, consider the SCM Morbidelli M100 machine we have for sale. Contact us for further details. • Working area • Max. panel loading width / Y passage: 2,200 mm • Z-axis workpiece passage: 250 mm • Pendulum working length: 1,700 + 1,700 mm • X+Y vector speed PRO-SPACE: 56 m/min • X+Y vector speed PRO-SPEED: 78 m/min • PRO-SPACE safety configuration: X-axis limited to 25 m/min for operator safety • 5-Axis Milling Unit – JQX • 5-axis JQX electrospindle, HSK 63F • B-axis rotation: ±185°, speed: 7,000°/min • C-axis rotation: ±320°, speed: 7,000°/min • Programmable CW/CCW rotation, ceramic bearings, liquid-cooled • Automatic extraction hood: 3 positions + excluded position • Drilling Unit – F23L • 13 independently selectable vertical spindles • 5 horizontal drilling heads with double output (3 in X, 2 in Y) • Drilling spindle speed: 4,200 rpm (standard) / 3,000–8,000 rpm (with inverter) • Integrated saw blade in X; max diameter 125 mm; thickness 2.2–6 mm • Blade speed: 5,000 rpm (standard) / up to 10,000 rpm (with inverter) • Drilling motor power: up to 3.9 kW • Max drill length: 70 mm; spindle spacing: 32 mm; Weldon Ø10 mm tool connection • High-pressure air assistance: >64 kgf per spindle • Tool magazines (total up to 28 positions) • TRB14: 14 tools; max tool Ø 300 mm (3-axis) / 350 mm (5-axis); max tool weight 8 kg • FAST14: 14 tools; max Ø 225 mm (saw) / 180 mm (circular tools/angle aggregates); max tool weight 8 kg • Worktable and clamping • 6 × TV FLEX 1600 tables/bars; pneumatic lock/unlock • Automatic reference stops: 6 rear, 6 intermediate, 4 lateral • Additional front stops H=75 • 4 pneumatic panel lifting devices H=75 • Pendulum machining capability • Vacuum clamping system • Vacuum equipment • Vacuum pump: 250 m³/h • 18 fixed cups: 145 × 145 mm, H=75 mm • 6 rotating cups: 145 × 55 mm, H=75 mm • Measuring / positioning • Automatic tool length sensor • Dual laser positioning (one projector per working area) • Automatic workpiece positioning references • Control & software • Maestro Active CNC HMI; Maestro CNC CAD/CAM • DXF import; PGM import / conversion to PGMX • Parametric programming; Tool Manager; Maestro APPS • Graphical worktable setup; collision checking; cycle-time estimation • Remote assistance capability; network connection Lrsdpfszwfnxjx Aa Rer • Operator console • eye-M PRO integrated industrial PC, 21.5" Full HD touchscreen (1920 × 1080) • Intel i7 2.80–3.60 GHz; 8 GB DDR4 RAM; 500 GB HDD • Ethernet RJ45; USB 3.0 • Wired TECPAD 7" remote control; cable length 6.5 m • Installation data • Installed power: 23–28.5 kVA; 400 V; 50 Hz; 3 phases • Air consumption: 450 Nl/min • Extraction air speed: 30 m/s; extraction connection Ø 250 mm Additional equipment • Tool holders and collets: not included in the offer • No other external accessories (robots, automation, chip conveyor, bar feeder, etc.) are specified as included

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION max 2-3 hours , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. Ljdpfx Aajvi Rd Tj Rerr TECHNICAL DATA IS PRESENT ON PHOTOS WORKING STATIONS: TECHNICAL DATA: 1. Left+right cutter 2. Roller glue application 3. Front and rear saw 4. Straight cutter also for solid laminates 5. ⁠Angle cutter 6. ⁠Rondomat front, rear, top, bottom 7. ⁠Straight wedge cutter 8. ⁠Wedge cutter with radius 9. ⁠ Dryer WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS MACHINE LENGHT APPROX 7 METERS WEIGHT : 3500 KG

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Ledpfxsw Enw Ie Aa Rerr

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: A1/000156, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 16,000 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, number of axes: 6, number of slots in tool magazine: 8, controller manufacturer: Routech- Quicklink, actuation type: electric, total height: 3,270 mm, total length: 32,100 mm, total width: 6,250 mm, overall weight: 21,000 kg, table length: 12,000 mm, table width: 1,000 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Routech OIKOS 12/19x1.25 – CNC 6-Axis Machining Center for Timber Construction For sale is a Routech OIKOS 12 CNC-controlled 6-axis machining center, designed for the precise processing of solid and laminated timber components for structural wood construction. This machine is suitable for the production of structural elements for single-family homes, hall construction, conservatories, carports, garden sheds, playground equipment, as well as general engineered timber construction. It enables complete processing of beams in a single pass – without the need for manual repositioning of the workpiece. Technical Specifications 6 interpolating CNC axes (X-Y-Z-B-C-A) Routech OIKOS 12 Max. workpiece length: 19,000 mm Max. cross-section: 1,250 x 300 mm Min. cross-section: 50 x 20 mm Max. workpiece weight: 1,250 kg (optionally up to 2,500 kg) Voltage: 400 V / 50 Hz Axis travel speeds: X: 107 m/min Y: 75 m/min Z: 28 m/min Rotary axes: A ±140° B ±180° C ±300° Milling Unit 6-axis special milling head TLT 1 (SCM Group) with: 13 kW continuous power (S1) Inverter power 18 kW Spindle speed up to 18,000 rpm Lrjdpfx Aajyu Upuo Ror HSK 63E tool holder Liquid cooling Processing in one pass: Milling, sawing, slotting, drilling, profiling, cross-cutting – all sides of the workpiece without re-clamping Tool change system Disc magazine “Rapid 8” with 8 tool positions Max. tool diameter: 360 mm Max. tool weight: 8 kg Additionally equipped with: Motorized saw unit Slotting unit with chain Preparation for adapter units Material Handling C-type buffer zone with 6 conveyor belts and 6 clamping chucks, length 13,500 mm Automatic unloading system 13,500 mm with 6 support beams Automatic waste conveyor for offcuts and chips Continuous processing of multiple workpieces possible. Control & Software CNC with PC Office ROUTECH QUICK-LINK user interface BTL data import from common CAD/CAM systems 3D simulation with collision check Restart after program interruption possible Separate simulation station “SIMOIKOS” for office workstation Safety & Equipment Enclosed safety cabin with Lexan viewing panel Photoelectric sensors at infeed and outfeed 2 extraction ports in the work area Air-conditioned control cabinet, CE compliant Summary The Routech OIKOS 12 is a high-performance CNC machining center for modern timber construction. With its 6-axis technology, high traverse speeds, complete 5-sided processing without re-clamping, and integrated material logistics, the machine is ideal for joineries and timber construction companies engaged in industrial production. Suitable for companies seeking precise, repeatable, and economical solutions for timber joinery processing.

Condition: ready for operation (used), Year of construction: 2010, Equipment: CE marking, SCM Cyflex 900 Year 2010 No routing unit Lredpfx Aaozka Awe Rjr Machine in perfect condition Direct available