Used Sefa Duplex Pro V3 Pneumatic Heat Press for sale (34,700)

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. Ppjdpfsy Dtpmex Aiist MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: good (used), Year of construction: 2001, Extruding pressing line for soybean, Instapro, made in 2001, consisted of 2 extruders, 2 presses, original AMA automatic filtration for oil, and cooler for the cake. Capacity is up to 1.200kg/h. Ppsdpfexuahbjx Aiiot

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations Psdpfxeyyxxfo Aiispt • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Psdoyyz Txepfx Aiispt Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) Pjdpfxsyyz Ebs Aiiept - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately Ppedpfx Aoyyzxheiijt - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fully automatic operation Drive 7.5 kW, S6, 400 V, 50Hz, 2850 rpm For use with saw blades D 550 mm Cutting range 270x140 mm (width x height), D 185mm Max. profile width 270mm Control unit with display Including piece counter Including reversing device for a maximum cut length of 3000mm Ppjdeyvtyvepfx Aiist Automatic shut-off via limit switch when material ends Hydropneumatic saw blade feed, continuously adjustable, from bottom to top Vertical and horizontal clamping units, on both infeed and outfeed sides of the saw head Pneumatic dosing spray device Cutting gap extension on both sides of the saw blade Electronic material feed unit 3-600mm feed length, with ball screw spindle and servomotor Including pneumatic horizontal and vertical clamping device Remnant piece from 75mm, depending on profile 2 extraction ports D 100 mm Safety guard over the saw head and feed unit A suitable extraction system can also be offered!

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: 840D, overall weight: 15,000 kg, This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information. Additional equipment • Toothed Spindle 1: Tool clamping interface: HSK-C63/ Tool speed max: 4500 1/min /Screw tightening torque, expansion chuck: 20 Nm Ppsdpfxeynhu Dj Aiiet • Toothed Spindle 2: Tool clamping interface: UTS 50 /Tool speed max: 7000 1/min/ Screw tightening torque UTS clamp: 40 Nm Machine Benefits Technical Machine Benefits • Nc workpiece spindle 1: traverse path x1: 1760mm, z1: 385mm/ travel resolution on the cnc: 0. 001mm/ input speed of the axes max: 60 m/min • Nc workpiece spindle 2: traverse path x2: 2011mm, z2: 390mm /travel resolution on the cnc: 0. 001mm/input speed of axes max: 60 m/min • Nc workpiece counterholder: traverse path x3: 104mm, z3: 107mm /travel resolution on the cnc: 0. 001mm /input speed of the axes max: 60 m/min • Gear tower 1: traverse path y11: 195mm /travel resolution at the cnc: 0. 001mm /swivelling angle b1 max: 10° • Loading gantry: travel u5 axis: 1907mm /traverse path v5 axis: 271mm • Input speed (all applicable axes): max 60 m/min • Rotation diameter max: 210mm/machining diameter max: 200mm/workpiece length max: 300mm/interface, workpiece clamping: kk6/workpiece speed max: 1100 1/min • Factory back spindle 1/2: speed max: 1000 1/min/gear spindle 1 and 2, shift slide y11, nc workpiece counterholder, slide x1/x2, slide z1/z2, a11 axle (charging unit), u5 & v5 axes (loading gantry):/speed max: 3000 1/min, 9000 1/min for gear spindle 2 • Loading gantry: 500kg/magnetic chip conveyor: 100kg/water recooler: 150kg

Year of construction: 2026, condition: new, functionality: fully functional, Belt press POWERPRESS 300 is designed for pressing fruit, berry and vegetable mash. Fruit mash is supplied on the belt which presses it against shafts. The obtained juice flows into a small collection tank under the press with filtration sieve on top. Then the external pump or juice collection tank with pump transfers the juice from the press to a desired storage tank or straight to ROCKET pasteurizer for further processing. The pressing process is continuous. Podpfx Aiet Rft Ueiept Capacity: 300 kg/h The most cost-efficient belt press in the market! The most evolutionary feature of our Belt press POWERPRESS 300 is one huge pressing shaft, which lets the machine to maintain the longer pressing time (belt length is 4900 mm) and huge shaft dimensions squeezes the juice efficiently by saving the costs and space. The juice yield of apples using our belt press is ~65-75 %. The yield highly depends on freshness and variety of fruits. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 300 filtrates the juice even during the pressing stage providing cleaner and purer product. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves service costs. Adjustable fruit inlet lever lets fruit mash supply onto the shaft easily. Crushed fruit mash can be supplied from MAXIMILL or straight from a bucket or basket. After work, belt press should be manually washed with a water stream. A full washing process takes around 15 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. The machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Ppodpfsq Nl Aqox Aiiot Capacity: 3000 kg/h. The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. -The juice yield of apples using our belt press 3000 is ~75 %. -There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. -The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. -The belt press 3000 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. -Pneumatic lifting of the security cover of the press ensures easier access when cleaning. -After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. -Belt tension is adjustable. -Machine is made entirely of stainless steel and has adjustable feet for more convenient use. -Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Year of construction: 2026, condition: new, The liquid comes into the tubular spiral surrounded by hot water which is heated by three electrical heating elements. The heat from the water heats up the liquid and eliminates the bacteria. Available outputs: 300 L/h, 500 L/h Ppodpoizbcnefx Aiiet The pasteurizer is suitable to heat various liquids, including viscous liquids: juice, puree, wine, broth, milk and other. The maximum heating temperature of electric pasteurizer is 90 º C (194 °F). Juice comes into the tubular spiral which is surrounded by hot water. Tubular spiral is made of stainless steel. The boiler has an integrated spiral. This provides saving of space and also prevention of heat loss when pumping the water into external heat exchanger. As a result, this technology saves the heating energy up to 15-20 %. The heating power is 30 kW. Electric pasteurizer has a touch-screen panel with digital thermostat which provides an automatic water temperature control. Automatic regulation of liquid temperature ensures an easy way to change the filling temperature on digital display. The pasteurizer is fast and easy to clean. It can be washed by CIP cleaning together with our Bag in Box fillers. Machine has pivoting wheels. The pasteurizer is easy to clean and maintain. Electric pasteurizers work in perfect synergy with our Bag in Box fillers. They have a special connection between them which prevents liquid from overflowing and ensures easy work.

Year of construction: 2026, condition: new, Belt presses POWERPRESS 800 are designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders.The obtained juice flows in the collection trays under the belt presses. Pressing is continuous. Capacity: 800 kg/h The most evolutionary feature of our belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the machine filtrates the juice even during the pressing stage providing cleaner and more pure product. Entirely made of stainless steel. Has adjustable feet. The belt presses function automatically. When the tank of the mass is full, all other machines which come before belt press turn off automatically. When the juice tank is full, juice pump pumps the juice into the tanks. Includes High pressure washer. Has an integrated pump. Belt tension is adjustable. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. The cleaning of the belt is automatic with high pressure cleaner, scraper and brush. Ppjdpfshu Ab Dex Aiijt Pneumatic lifting of the security cover of the press ensures easier access when cleaning.

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm Pjdpfx Aexvbvveiijpt - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Pedpoxn Iq Djfx Aiispt Hydropneumatic saw feed Pneumatic material clamps Spray device Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, Ppedpfx Asw D T Uieiijt * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: excellent (used), Hydraulic assembly press Italprasse Program/30 for door and window joinery The Italpresse Program/30 machine is a hydraulic vertical press designed for precise assembly and gluing of wooden elements, such as window and door frames and furniture bodies. Thanks to its design, it allows for precise fitting and permanent connection of components, which is crucial in the production of door and furniture joinery. Technical specifications •Maximum working dimensions: 3000 × 1700 mm •Stroke of vertical cylinders: 800 mm •Stroke of horizontal cylinders: 1200 mm •Adjustable lower beam: can be set in three positions •Hydraulic cylinders: •2 vertical (Ø 100/60 mm) •2 horizontal for setting frames (Ø 50/35 mm) •Power of hydraulic unit: 2.2 kW •Overall dimensions: 3600 × 1000 × 2650 mm •Weight: approx. 1200 kg Application Italpresse Program/30 is ideal for: •Gluing and assembling window and door frames Psdowkf Stopfx Aiispt •Assembling furniture bodies •Assembling wooden panels and other construction joinery elements

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1015, profiles with dimensions (HxB) up to 100x195mm, 80x200 mm automatic work cycle driven by a 3 kW/400 V, 2850 rpm motor cutting disc d=450x3.8x40mm, z=110 horizontal and vertical material clamping on the feed side dosing spray system horizontal material clamping in the feeder moving both clamping jaws when retracting (prevents scratching of the profile) infinitely adjustable hydropneumatic cutting disc feed cutting disc exiting from the rear Pedpfowgmv Sox Aiiept length of cut sections adjustable in the range of 0-300mm (with reversing device 0-600 mm) setting the cutting length by a handwheel with a mechanical counter maximum width of the cut profile 200 mm cutting range (height x width) 100x195mm, 80x200mm automatic shutdown when material runs out possibility of connecting a dust extractor

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR Ppsdpfethg Diex Aiist HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Year of construction: 2019, condition: excellent (used), The Smipack FP6000CS is a high-speed, fully automatic L-bar sealer. Featuring continuous sealing ("CS") and a motorized center seal, it excels at packing a wide variety of items with centered high-quality seals. The "CS" designation signifies the addition of a motorized center seal that adjusts the longitudinal seal to the vertical center of the product Machine Type: Fully automatic L-bar sealer Sealing System: Continuous sealing ("CS") with hot knife / PTFE-coated blade Sealing Bar Dimensions: 640 mm 510 mm Max Pack Height: Up to 200 mm \ 7.8 inches Max Foil Width: Up to 600 mm Production Output: Up to 3,600 packs per hour (depending on product size and film used) Conveyor Speed: 10 to 30 m/min, electronically adjustable via inverter Ppjdpfxjy Synfe Aiiot Power Supply: 220 - 240 / 380 - 415 V | 3PH + PE / 3PH + N + PE | 50/60 Hz Installed Power: 3,350 W Usable Films: Polyolefin and Polyethylene up to 30 mu

Year of construction: 2019, condition: excellent (used), Adpak Smipack Heat Shrink Tunnel Year 2019 The SMIPACK T452 is a high-performance, double-chamber heat shrink tunnel Machine Dimensions: 1900 mm L x 835 mm W x 1440 mm H Tunnel Chamber Dimensions: 450 mm W, 230 mm H Conveyor Speed: Variable from 4 - 29 meters per minute Control System: FLXMOD® equipped with an alphanumeric LCD control panel and modular power section Cycles: Capability to store up to 10 different work cycles Film Compatibility: PVC, polyolefins, and polyethylene up to 80 mu Pjdpsy Sx Abofx Aiispt Conveyor Belt: Features a motorized chain of silicone-coated rollers with an integrated product alignment device In excellent condition Ready for use

Condition: used, Gebr. Thiel Duplex 159 Universal Milling Machine with DRO High quality German-built Gebr. Thiel Duplex 159 universal milling machine in good used industrial condition. Precision toolroom machine fitted with Newall digital readout (DRO), swivel vice and universal milling head. Well regarded for accuracy, rigidity and versatility, these machines are ideal for toolrooms, precision engineering, prototyping, maintenance workshops and general machining applications. Machine Details: Manufacturer: Gebr. Thiel GmbH Model: Duplex 159 Universal milling machine 380V 3 phase Newall DRO fitted Swivel machine vice included Universal adjustable milling head Horizontal and vertical milling capability Coolant tray and lubrication system Features: Precision table feeds Heavy cast iron construction Fine feed controls Toolroom quality machine Ideal for precision engineering work Condition: Good used workshop condition with normal cosmetic wear for age. Machine is complete and operational. A highly sought after universal milling machine with excellent build quality. Ppedpey R D E Eofx Aiiet Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: ready for operation (used), functionality: fully functional, I am selling 1 to 6 complete sets here. Podpfx Aioyr Idtjispt Brand: Miller, Model: Proheat 35 – almost new. Food warmer with induction heating element, 400–460 V, CE marking. New price for a complete set: 54,000 euros. Sale only to businesses (B2B) + VAT, or net price for export. Errors and omissions excepted.

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Ppsdpsy U Ignofx Aiist Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Podey U U Tujpfx Aiijpt Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: like new (used), Year of construction: 2019, machine/vehicle number: B0203R0016, functionality: fully functional, operating hours: 3,500 h, stroke length: 250 mm, total length: 6,000 mm, total width: 2,300 mm, total height: 3,000 mm, overall weight: 17,000 kg, controller manufacturer: TRUMPF, controller model: T3500 Touch CNC control, working width: 4,000 mm, bending force (max.): 230 t, installation height: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, lower tooling, safety light barrier, upper tooling, TRUMPF ProfiPress 230-40 Heavy Duty CNC Press Brake LOW HOURS! High-performance heavy duty hydraulic press brake in excellent technical condition with very low operating hours. The machine has been fully serviced and maintained exclusively by TRUMPF from new. Equipped with TRUMPF T3500 Touch CNC control, offering fast and intuitive operation, DXF import for tools and part files, and efficient programming directly from CAD data. 4-axis CNC backgauge (X, R, Z1, Z2) with 4 backgauge fingers, allowing easy and precise part positioning, improved repeatability, and comfortable two operator bending for large or heavy parts. Integrated CNC crowning system guarantees accurate bending results over the full working length. Psdpfxjycl U Rs Aiiept Robust block hydraulic system and hydraulic upper beam drive make this press brake extremely powerful and reliable, suitable for continuous industrial production. Fast working speeds. Features include pneumatic uper clamping system, foot pedal operation, DXF import, and safety systems. Key advantages: – Very low operating hours – TRUMPF serviced machine, TRUMPF support. TRUMPF ProfiPress series. – 4-axis CNC backgauge with 4 fingers ideal for two-operator or long part bending – Heavy-duty, extremely rigid construction – DXF import (tools & parts) – High precision CNC crowning – Reliable ProfiPress series Delivery within Europe possible by agreement. The machine can be inspected under power by appointment.