Used Sefa Duplex Pro V3 Pneumatic Heat Press for sale (34,727)

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor - Heat and Control fryer with deoiling belt - Flavour drum - Gas powered oil heater and oil pump. Hsdpfx Amsyhc H Uogjn More information to follow.

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Hsdpfx Amju Rwa Ijgsn Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Pedal adjustment: 25 mm Other • Rotating wedge coupling Hsdpfx Amevnrhwogsn • Foot release • Control and protective screen as new, only used very little • Without table

Condition: as good as new (ex-display), Used High Pressure Concrete Nailer HN 25 C2 MAX Powerlite The HN25C2 is a compact nailer for concrete and steel, allowing you to work as close as 6 mm from the edge, making it ideal for tight corners. Its main area of application is work on metal stud framing. The nose of the HN25C2 is compact, meaning you can also work with thin metal profiles. With special nails, it can penetrate steel up to 5.0 mm thick or drive nails into concrete with a compressive strength of 60 N. Technical specifications: • Operating pressure: 12–25 bar • Nail length: 15–25 mm • Magazine capacity: 100 nails • Air consumption: 1.6 ℓ/cycle at 18 bar operating pressure • Weight: 2.0 kg The nailer was used for demonstration purposes and is therefore classified as used. It is in perfect technical condition. Supplied in a transport case with user manual. For further details, please refer to the pictures. You will receive an invoice with VAT shown separately. Payment in advance (bank transfer) only – no PayPal! Collection from our shop is of course also possible. Shipping by UPS – shipping costs €8.90. If you have any questions, please do not hesitate to contact us. Hedsyizrfjpfx Amgjn

Condition: excellent (used), Offer for juice pressing line: - Flottweg B-FRU-1500 LR press, year 2004 - mill/crusher - mash pump - Flottweg control cabinet - juice pump - slotted filter for water from belt washing - water pump Hedeyc D N Topfx Amgjn - pulp pump - process cabinet All machines and equipment are made of acid-resistant stainless steel. The price is for the complete set of machines.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 1500 kg/h. - The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. - The juice yield of apples using our belt press 1500 is ~75 %. - There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. - The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. - The belt press 1500 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. - Pneumatic lifting of the security cover of the press ensures easier access when cleaning. - After work, belt press should be manually washed with a water stream. - A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. - Belt tension is adjustable. Hedpfx Amsflpp Eogsn - Machine is made entirely of stainless steel and has adjustable feet. - Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 1200 kg/h The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. The juice yield of apples using our machine is ~75 %. There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. Hsdpfx Aeflpplomgon Machine works automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. Pneumatic lifting of the security cover of the press ensures easier access when cleaning. After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. Machine is made entirely of stainless steel and has adjustable feet. The washing is simple, and all machinery parts are easily removable. Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 400, POWERPRESS 800, POWERPRESS 1500.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous Capacity: 400 kg/h Hodjflpnyjpfx Amgen The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. The juice yield of apples using our belt press is ~75 %. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. Machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 800, POWERPRESS 1200, POWERPRESS 1500.

Condition: used, Year of construction: 1963, machine/vehicle number: 7014, Andruckpresse / Proof Press Asbern ADR.1Baujahr / Year 1963 - SN. 7014 Format / Size max. 400 x 550mm Aufzugsstärke / Lift strength 1,2mm Hsdpfx Aertn Sgjmgen Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Used electrically heated pressure vessel with agitator Item number: 10256 Last use: Chemistry Volume: 280L Type: Upright on feet Material (wetted parts): 1.4301 stainless steel Bottom: dished bottom Top: dished bottom with flange ring Operating pressure according to type plate: +3Bar Operating temperature: Max. 90°C Tank dimensions: Inner diameter: 560mm Outer diameter: 580mm Height of the feet: 260mm Distance from drain to floor: 365mm Total height: 1540mm Materials: Interior: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Double jacket around cylinder and bottom electrically heated Agitator in upper base, speed adjustable Hsdpfod Dwi Hjx Amgon Top floor completely removable Various connections Sight glass in cylinder

Condition: good (used), Used pressure vessel / Electrically heated SKU: 10407 Last use: Cosmetics Volume: 695 litres Type: Standing on 3 feet Material (media contact): 1.4404 stainless steel Design: Single-walled / Insulated / Electric Heating Manhole: 345mm Bottom: Curved Upper floor: Curved Operating pressure according to type plate: - 1 / +3 bar Test pressure according to type plate: 8 bar Maximum operating temperature: +152°C Dimensions of containers: Outer diameter: 820mm Cylindrical height: 1220mm Height of feet: 750mm Distance outflow to ground: 800mm Total height: 2040mm Total width: 1000mm Materials: Inside: 1.4404 / AISI316L Exterior parts: 1.4301 / AISI304 Facilities: Nameplate: yes Hsdpod R Hgkofx Amgon Outlet: DN 65 Various connections Isolated Electrically heated Actuator

Condition: excellent (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 inch 12 teeth Hodpfxjv Ukxuj Amgsn -Type: 20B-2 1 1/4" x 3/4" -Shaft mount: inner Ø 50 mm -Dimensions: see photos -Total dimensions: Ø 138 x 80 mm -Weight: 3.8 kg.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-125-PPS-A with proximity switch -Stroke distance: 75 mm -Piston: Ø 32 mm -Piston rod: Ø 10 mm / M 10 x 1.25 -Proximity switch: 2 pieces, see photos Hodeqv Hqgopfx Amgjn -Quantity: 4x cylinders available -Price per piece -Dimension: 200/40/H60 mm -Weight: 0.4 kg/pc.

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 15 teeth Hedewlzkhjpfx Amgon -Diameter: 197 mm -Shaft mounting: Inner Ø 60 x 163 mm -Bolt circle: Ø 94 mm M12 -Dimensions: see photos -Overall dimensions: Ø 197 x 163 mm -Weight: 15.7 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-180-PPS-A with proximity switch -Stroke path: 180 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M 10 x 1.25 -Dimension: 330/38/H65 mm -Weight: 0.6 kg Hodpfx Ameqn Apujgen

Condition: excellent (used), Pneumatic pressure switches Hjdsb A Sv Sepfx Amgsn Type: MDR2/11 -Number: 7x pneumatic pressure switches available Price: per piece -Weight: 0.3 kg

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 12 teeth -Shaft mounting: Inner Ø 70 mm -Dimensions: see photos -Dimensions: Ø 162 x 275 mm Hedeh Ig Skepfx Amgsn -Weight: 11.3 kg

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 " x 17.02 mm 57 teeth -Diameter: 475 mm -Shaft holder: inner Ø 90 x 90 mm -Dimensions: see photos -Quantity: 1x piece available -Dimensions total: Ø 475 x 90 mm Hsdpewzu Sdjfx Amgen -Weight: 62 kg

Condition: used, Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket Hedst U Tqcjpfx Amgon -Duplex sprocket: 1 inch 15 teeth -Diameter: 133mm -Shaft holder: inner Ø 50 x 70 mm -Dimensions: see photos -Number: 4x sprocket available -Price per piece -Total dimensions: Ø 133 x 70 mm -Weight: 3.6 kg/piece

Condition: good (used), Pneumatic pressure switches -Type: 2KA/96x96/0-10 bar -Adjustable pressure: 0-10 bar -Number: 4 switches available -Price: per piece -Weight: 1.2 kg Hsdpfeb A Ii Tjx Amgjn

Condition: good (used), Pneumatic pressure switches Type: Nautilus -Pressure: -1 to 0.8 bar -Operating voltage: 240 VDC Hodpsb A Hirsfx Amgon -Quantity: 3 pieces available - Price: per piece -Condition: Stock item, unused -Weight: 1 kg

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 18 teeth -Shaft mounting: Inner Ø 100 mm -Dimensions: see photos -Number: 2x gears available - Price: per piece Hjdpfx Ash Ig Scsmgjn -Overall dimensions: Ø 237 x 245 mm -Weight: 30 kg/pc.

Condition: new, Year of construction: 2026, Horizontal bending machine T 300 Multi - ZOPF - with semi-automatic control - (99 bending programs each 16 steps) - hydraulic pressure 30 to. - length of stroke 250 mm Hjdpfxefh Tnte Amgon - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 200x20 mm round tube 3/8" - 2"

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Overall dimensions: Length: 1670 mm Hedpjxzqmzjfx Amgjn Width: 1100 mm Height: 1500 mm

Condition: used, Technical data: Briquette diameter: 70 mm Hjdoxxxawspfx Amgsn Briquette length: 70 mm Hopper diameter: 1200 mm Hopper height: 1000 mm Hopper capacity: 1.13 m³ Throughput: 70–120 kg/h Power supply: 400 V Motor power: 11 kW Safety switch