Used Sfm Cht-60 for sale (22,922)

Condition: used, mileage: 467,100 km, power: 260 kW (353.50 HP), first registration: 01/2016, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1168 * S 516 MD * Retarder * French inspection certificate is available. * Currently fitted with 58 seats (no reclining seats) --> therefore, the number of seats can be increased. * An additional row of seats is included separately, allowing for 60 seats. * The following repairs were carried out at EVOBUS in June 2026: * Retarder replaced * Retarder control unit replaced * Exhaust gas recirculation valve replaced * Haldex separator replaced Bjdpfx Aexwr Apjfwodg * 2 x V-belts replaced * Air reservoir with drain replaced * Oil separator replaced * Cost: 8,500 EUR / net * In July 2026: Air conditioning service performed * Side matrix (without control unit) * Interior route display * Seats can be adjusted to face backwards * LIFT * Lifting mechanism - trunk lid on the right side * Storage compartments * Convector heater * Auxiliary heater * Air conditioning * Rear entrance * No toilet, no refrigerator. * Wheelchair-accessible bus * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in operation / mileage and condition may vary. * All information is subject to change without notice. * We reserve the right to sell the vehicle in the meantime. * We refer to our general terms and conditions.

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Bodpfoxlkg Ajx Afwjdg Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), mileage: 325,000 km, fuel type: diesel, emission class: euro6, Year of construction: 2018, IVECO DAILY 60-15 Year 2018 EURO 6 Driving License C 365,000 km Free registration, chassis 3750 mm wheelbase, reinforced leaf springs, 365,000 km, financing available. Bdjdpfx Afsxt N I Uewog

Condition: used, Kompressor / Compressor Gardner Denver SKG-275.2V.02 (60) Seitenkanalverdichter Baujahr / Year 2007 - SN. 2750748 Luftstrom / Capacity 100 m3/h Bedpfx Asw Nbiksfwodg SI 1,5/1,8 kW / 2800/3400min Überholt 2014 / Overhauld 2014 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2017, machine/vehicle number: 271464-01-01, Offer 26075 Technical Specifications: - Rope balancer with a load capacity of approx. 60 kg - Articulated arm with an outreach of approx. 3.6 m - Swivel range approx. 375° Bdsdpfeyv En Eox Afwsg - Hook travel approx. 2.0 m - Total construction height approx. 3.2 m - Pneumatic connection 6 bar - Own weight approx. 300 kg

Condition: used, Year of construction: 2002, Suitable for automatic grinding of all types of tools. Accessories: Total enclosure Knoll E53319 bandfilter system Numroto 3D Simulation Software, Numroto 3D Collision Detection Software, Numroto Form Cutter Software, Pallet loader CNC handwheel Control cabinet cooler, automatic tailstock automatic central lubrication Glass scales on the X, Y, Z linear axes Measuring probe Hydraulic workpiece clamping Oil collection tray 2 loading pallets, 1 grinding wheel holder. X axis travel: 800 mm Y axis travel: 270 mm Z-axis travel: 660 mm Bdjdpfjyv Hv Rox Afweg B axis travel: 400 ° Rapid traverse: 30/15/30 m/min Workpiece mount: ISO 50 Tool holder cone: ISO 50 Grinding spindle drive power: 12 kW Grinding spindle speed stepless: max. 9000 rpm, Grinding wheel diameter: max 203mm Connected load approx.: (400V/50Hz) Dimensions L x W x H: 1900 x 2300 x 2300 mm Weight approx: 5400 kg Colour: Grey / yellow

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm Bjdpfx Afozrnvzjwedg - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Net price: 34,900 PLN Net price: 8,300 EUR (based on the rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: new, Maximum tank capacity: 60 L Lifting and tilting function Battery life: 8 hours Battery: 2 x 12 Ah Charging current: 230 V Control panel: 24 V Motor power: 500 W + 140 W Net weight: 115 kg Stainless steel construction Mobile unit on casters User-friendly control panel Battery level display Automatic tank locking Tank can be tilted at any height Increased lifting height available upon request Adaptable to any type of tank Dimensions: 820 x 810 x 2200 mm Top width: 965 mm Usable height: 1550 mm Key advantages Mobile tank lifter suitable for professional use in catering and hospitality settings Lifting and tilting function to facilitate unloading Stainless steel construction for a clean and durable work environment Easy movement thanks to integrated casters Battery-powered operation without permanent connection Control screen indicating battery charge level Automatic tank locking in the arms Tank can be tilted at any required height depending on the application Higher lifting height available upon manufacturer's request Adaptable to any type or brand of tank according to configuration Detailed technical specifications Model: LIFTO 60 Type of equipment: Mobile tank lifter with tilting function Brand: Sinmag Europe Maximum tank capacity: 60 L Tilting: Yes Battery life: 8 hours Battery capacity: 2 x 12 Ah Charging current: 230 V Control panel: 24 V Motor power: 500 W + 140 W Net machine weight: 115 kg Total height: 2200 mm Width: 820 mm Depth: 810 mm Top width: 965 mm Usable height: 1550 mm Construction: Stainless steel Mobility: Mobile unit on casters Power supply during use: Batteries, without permanent electrical connection Battery control: Control screen for battery charge level Manufacturer's warranty: 2 years Bdedpfjzk Hf Eex Afwog

Condition: used, DECKEL MAHO DMC 60 U 5-axis universal machining centre, built 2002. Travels 600 x 700 x 600 mm with rapid traverse up to 40 m/min. The 12.000 rpm motor spindle in SK 40 DIN 69871 delivers 28 kW (40% ED) / 19 kW (100% ED) and is carried by an automatic universal swivel milling head with controlled B axis, working together with an NC rotary table to give full 5-axis capability. Siemens SINUMERIK 840D 3D path control. Rotary pallet changer with 2 pallets of 630 x 500 mm, 600 kg each, plus clamping hydraulics for hydraulically actuated fixtures on the rotary table and pallets. 60-pocket SK 40 magazine with horizontal double-gripper changer. Fitted with internal coolant supply and a 900 l coolant tank, chip conveyor, RotoClear rotating viewing window and Blum laser tool measurement in the work area. Bsdpfx Asznffrofwedg

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm Bedpfx Afjzmixmswedg feed ja m/min weight of the machine ca. 1,1 t

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Machine is being completely overhauled Bodozlbriopfx Afwedg Equipment and technical data: Table size: 1100 x 880 mm Drive motor, pole-changing: 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm manual height adjustment: via handwheel manual tilt adjustment: via handwheel Height adjustment of the milling spindle: 110 mm Tilt adjustment of the milling spindle: -5° to 45°; bearing-mounted on both sides Reversing switch for clockwise and counter-clockwise rotation with 3-roller feed unit Images show the machine in non-overhauled condition; the sale does not include the Aigner table extensions visible in the images Availability: by arrangement Storage location: Flörsheim

Condition: used, OKK PVC-60 X-axis 960mm, Y-axis 610mm, Z-axis 600mm Table dimensions: 48.03" x 25.20" Maximum table load: 1,760 lbs. Travel ranges: (X) 40.16", (Y) 25", (Z) 20.47" Distance table surface – spindle nose: 7.87" – 28.35" Distance spindle center – column: 33.07" Spindle speed: 100–6,000 RPM Spindle taper: CAT-50 Spindle motor: 15/10 HP Rapid traverse: (X, Y) 630 ipm, (Z) 472 ipm Feed rate: 157 ipm Tool capacity: 20 positions (ATC), dual-arm swivel system Bedpozmqdwefx Afwodg Tool change time: 3 seconds Tool selection: Random principle (any order), bidirectional Integrated, hardened and ground flat guideways (box ways) Coolant unit Fully enclosed, spacious splash guard Machine weight: 13,640 lbs.

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Bjdpfjyr Tpnox Afwedg

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,685 h, load capacity: 2,500 kg, lifting height: 5,180 mm, free lift: 1,760 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,380 mm, battery capacity: 620 Ah, remaining battery capacity: 93 %, battery voltage: 80 V, DGUV certified until: 08/2027, fork length: 1,200 mm, total height: 2,380 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25/600 electric forklift with the following specifications: * Operating hours: 1,685 * Lifting capacity: 2,500 kg Bdjdpezfxzzsfx Afwjg * Lifting height: 5,180 mm * Overall height: 2,380 mm * Year of manufacture: 2017 STILL 2.5-ton electric forklift with a full cabin and heater, battery at 93%, tires in good condition (rear tires new), triplex mast with full free lift, side shifter, lighting compliant with StVZO regulations, fork length 1,200 mm (other fork lengths available upon request), new charger. Includes 1,000 hours of service according to STILL manufacturer specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Sales are exclusively to business customers. Subject to prior sale, errors, and omissions. We can deliver your new forklift cost-effectively with our own ramp-equipped low-bed trailer (transport costs upon request). For more information about us and other offers, please visit our website.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Bsdpfezii A Rsx Afwjdg Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Bdsdpfx Afozimgaswsg Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,854 h, load capacity: 5,000 kg, lifting height: 3,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 2,550 mm, battery capacity: 930 Ah, remaining battery capacity: 84 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-50 electric forklift with the following specifications: * Lifting capacity: 5,000 kg * Lifting height: 3,450 mm Bjdpfezivfxex Afwsdg * Overall height: 2,550 mm * Year of manufacture: 2018 * Operating hours: 7,854 Still 5.0-ton electric forklift, very good battery, good tires (rear tires new), telescopic mast for clear visibility, side shifter, fork positioner, lighting compliant with StVZO regulations, fork length 1,200 mm, charger. Price ex works, including 1,000 hours of service according to STILL manufacturer’s specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-type low-loader (transport costs upon request). Further information and offers can be found on our newly designed website!

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head Bdedpfx Afezqyw Isweg -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm -Weight: 8.7 kg

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 305 h, load capacity: 135 kg, lifting height: 2,997 mm, fuel type: electric, mast type: telescopic, construction height: 1,385 mm, empty load weight: 640 kg, total length: 1,525 mm, drive type: Elektro, construction width: 750 mm, Medium-lift order picker Mast type: Telescopic Bjdpfozrccpsx Afwjdg Condition: Ready for use and fully operational Technical condition: Good Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 24V Battery capacity: 210Ah Battery manufacturer: Lithium-ion Battery year: 2023 Bypass for lift/lowering cut-off: No bypass for lift/lowering Drive/lift signal: All warning signals Bumper: Bumper with rubber protection Storage compartment on right side Load platform: manually adjustable, 540 x 685 mm Flashing beacon: front & rear Operator compartment Operator login code: Access 123 German labeling Operating manual: German Paintwork: Orange Battery: 205 Ah maintenance-free Charger: 30 Amp 85-265 VAC with cable, IEC socket, with CEE 7/7 plug

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,358 kg, axle configuration: 3 axles, first registration: 03/2021, total length: 13,550 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. Insulated double rear doors (FP, NX17) foam with double s/steel lockrods. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). lifting front axle. Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Bdodpfx Afezrdk Iowjg Rear right - 5 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 05/2022, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. 2 temperature sensors for CargoWatch FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Bdsdpezrdypefx Afwjg Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/24 ISO pallets. ROTOS SCB running gear (disc brakes). Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 8 mm Middle right - 8 mm Rear left - 6 mm Rear right - 8 mm

Year of construction: 2022, condition: excellent (used), We offer this very well-maintained EGGcellent Pollux™ 60, Pollux TM60, which makes eggs salmonella-free, manufactured in 2022. Device type: Pollux™ 60 Serial number: PX 60ST8089 Patent number: WO0201960 Single-phase voltage: 230 V Three-phase voltage: 400 V Rated power: 5 kW Description The Pollux TM60 device from eggcellent Foodservice GmbH is a professional kitchen appliance for the safe processing of eggs in the catering, hotel, and institutional food service sectors. The core of the system is the so-called Pollux process, a patented process for treating eggs directly in their shells. This involves using a precisely controlled energy or steam system (water vapor and temperature changes) to reliably kill salmonella both inside and on the shell – all without any chemical additives or radiation. New price: €9,000.00 A key advantage is that the natural structure and quality of the egg are preserved: the egg white and yolk remain liquid and separable, so the eggs can still be used as raw eggs, for example, for desserts, sauces, or dishes with partially cooked eggs. The TM60 (Pollux 60) model is designed for commercial use and can process up to 60 eggs per cycle. In addition, the device also enables precise cooking to different degrees of doneness (soft, medium, hard) as well as warming functions. This allows safe breakfast eggs or large quantities to be produced efficiently and reproducibly. The technology is internationally tested and certified, including by the SGS testing institute, and meets food safety requirements (HACCP documentation). This provides a high level of hygienic safety and allows businesses to use fresh eggs without risk while operating economically. In summary, the Pollux TM60 is an innovative device that makes eggs salmonella-free through controlled energy input and steam technology, without altering their properties, thus enabling a safe, flexible, and economical use of eggs in the professional kitchen. The Pollux TM60 is a device for kitchens (e.g., hotels or canteens) that can be used to make eggs safe without actually cooking them. Raw eggs can normally contain salmonella, which can cause illness. The Pollux device uses heat and steam to kill the salmonella. The temperature is very precisely controlled so that: • the salmonella is killed • but the egg does not become hard The egg therefore remains like a raw egg – the yolk and white are still liquid and can be processed as usual (e.g. for desserts or mayonnaise). In addition, the device can also cook eggs to a specific degree of doneness (soft, medium, or hard) and process many eggs at the same time (up to 60). In short: The Pollux TM60 makes eggs safe like cooked eggs, but usable like raw eggs. Pollux TM60 – Professional device for salmonella reduction of eggs – used, very good condition For sale is a Pollux TM60 from eggcellent Foodservice GmbH – an innovative professional device for the catering, hotel, and institutional food service sectors. Condition: • Used, but in very good condition • Fully functional • Normal signs of wear and tear Bdsdpfszpg Rrsx Afwjg Accessories: • 4 stainless steel trays • 30 plastic trays for eggs Please note: Collection only and no longer under manufacturer's warranty.

Condition: new, machine/vehicle number: 17279, Year of construction: 2026, load capacity: 16,000 kg, lifting height: 4,000 mm, free lift: 1,480 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,030 mm, fork length: 2,400 mm, front tire size: 12.00-20 100%, rear tire size: 12.00-20 100%, overall weight: 19,300 kg, Equipment: cabin, 5218640 Bjdpjzp T Auefx Afwedg Serial Number: FDC0H-5107-00494

Condition: new, Year of construction: 2022, load capacity: 3,000 kg, lifting height: 4,650 mm, total length: 3,660 mm, - Geräteart Elektro - Bedienung Sitz - Tragfähigkeit 3,0t - Lastschwerpunkt 500 mm - Lastabstand 440 mm - Radstand 1650 mm - Achslast vorne mit Last 7290 mm - Achslast hinten mit Last 861 mm - Achslast vorne ohne Last 2581 mm - Achslast hinten ohne Last 2570 mm - Bereifung Superelastik - Spur vorne 950 mm - Spur hinten 900 mm - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 9 - Sitzhöhe/Standhöhe (SRP) mm 1141 - Kupplunghöhe 487/367 mm - Arbeitsgangbreite bei Palette 1000 x 1200 quer 3735 mm Bdjdjy T Srxjpfx Afwjg - Arbeitsgangbreite bei Palette 800 x 1200 längs 3935 mm - Wenderadius 2095 mm - kleinster Drehpunkt 570 mm - Fahrgeschwindigkeit mit Last km/h 19 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit mit Last m/s 0,40 - Hubgeschwindigkeit ohne Last m/s 0,55 - Senkgeschwindigkeit mit Last m/s 0,52 - Senkgeschwindigkeit ohne Last m/s 0,45 - Zugkraft mit Last 7680 N - Zugkraft ohne Last 8040 N - Max. Zugkraft mit Last 17050 N - Max. Zugkraft ohne Last 17240 N - Steigfähigkeit mit Last 18,1 % - Steigfähigkeit ohne Last 29 % - Max. Steigfähigkeit mit Last 21,7 % - Max. Steigfähigkeit ohne Last 29,0% - Beschleunigungszeit mit Last 4,7 % - Beschleunigungszeit ohne Last 4,2 % - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Hubmotor, Leistung bei 15 % ED kW 16,3 - Batteriespannung V 80 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min - Anhängekupplung, Art/Typ DIN Bolzen

Condition: used, functionality: fully functional, machine/vehicle number: 516328E00014, Year of construction: 2014, operating hours: 8,839 h, load capacity: 4,500 kg, lifting height: 4,880 mm, fuel type: electric, mast type: simplex, construction height: 3,150 mm, fork carriage width: 1,300 mm, fork length: 2,400 mm, empty load weight: 6,950 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: 516328E00014 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Speed class: 15 Condition: As new Technical condition: Very good Battery voltage: 80V Bodpfx Afey Ap S Iowodg Battery capacity: 930Ah Battery manufacturer: SBS Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: STILL RX 60-45 electric forklift Year of manufacture: 2014 Operating hours: 8,840 Equipment: Standard mast Full cabin (enclosed operator cabin) Fork positioner Sideshift Battery tested and ready for use Condition: Used, in good visual and technical condition. The machine is immediately operational. Normal signs of use present. UVV: UVV inspection will be carried out before delivery. Errors and prior sale excepted. Additional features: 3rd valve, 4th valve, heater, full cabin, exterior mirrors, joystick, wiper, seat.