Used Sheet Shears Lvd Mvsb 62/6,35 for sale (11,754)

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm Ncsdoww Nccepfx Ac Tsu blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. Ncedpfx Ajt Tqkdec Tju cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: used, mileage: 53,050 km, power: 103 kW (140.04 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,250 mm, loading space width: 1,770 mm, loading space height: 1,650 mm, Equipment: ABS, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Internal Vehicle No.: 6243X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide Over 400 vehicles immediately available at all times Largest selection – Best price More than 1000 satisfied customers per year – Top customer ratings WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition One previous owner, German vehicle, non-smoker vehicle Full service history exclusively at Volkswagen As-new brakes front and rear All-wheel drive "4MOTION" Number of seats: 5 Tow bar, increased towing capacity 3,000 kg Reversing camera Auxiliary heater Audio system Composition Audio (radio, SD card interface, MP3 playback function) Reinforced suspension and damping Exterior mirrors electrically adjustable and heated ---- Optional equipment: * Storage Package 2 * Storage compartments: 2 DIN slot at the front under the headliner * Interior lighting in cab: front reading light * Tow bar: fixed ball head * Trailer Stabilization Program * Audio system Composition Audio (radio, SD card interface, MP3 playback function) * Mobile phone interface Bluetooth * Spare wheel with standard tires incl. on-board tools and jack * On-board tools and jack * Mud flaps front and rear * Mud flaps front * Mud flaps rear * Exterior mirrors electrically adjustable and heated * Chassis: Reinforced suspension and damping * Remote central locking keys (2), foldable * Side marker lights * Seat covers/upholstery: artificial leather * Step at rear right * Warning marking foil on exterior * Additional heater (hot water) with stationary heating function and remote control Ncedoylf I Aspfx Ac Teu Standard equipment: Driver’s airbag, Anti-lock Braking System (ABS), drive type: all-wheel drive, exterior mirror convex, left, exterior mirror convex, right, LED indicators integrated in exterior mirrors, rubber flooring in cab, underbody drag coefficient cover, dual headlights, entry handle on rear left D-pillar, entry handle on rear right D-pillar, Electronic Stability Program (ESP), driver assistance system: hill-start assist, driver assistance system: crosswind assist, window in cargo/passenger compartment: fixed, front left, window in cargo/passenger compartment: fixed, front right, electric front window lifters, laminated windshield, vehicle without cargo area partition, 6-speed transmission, A-pillar grab handles, rear wing doors without glazing, interior cab lighting: LED, body/construction: standard crew cab van, body variant: normal roof, child safety lock in cargo/passenger compartment, fuel tank: 75 l, radiator grille with chrome strip on top, bulkhead behind 2nd row of seats, steering column (steering wheel) adjustable, headlamp range adjustment, truck registration, engine 2.0 L – 103 kW TDI, multifunction display Plus, rear fog light, wheelbase 3640 mm, tire repair kit, diesel particulate filter, low emission according to Euro 6d-TEMP, sliding door right with intermediate locking for limited opening, SCR system (AdBlue technology), electromechanical power steering, seats in cab: passenger seat adjustable, seats in cab: driver seat adjustable, seats in cargo/passenger compartment: first row, 3-seat bench, engine start/stop system, power sockets (12V) in cab (2 units), front bumper in grey, daytime running lights, load securing rings, seat belt warning system (driver’s side), immobilizer (electronic), heat-insulating glazing, central locking with remote control

Condition: used, Year of construction: 2002, sheet width 3000 mm plate thickness 4,0 mm distance between columns 3080 mm max. 1000 mm Cutting length variabel mm cutting gap adjustment variabel mm connected load 11,0 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 3,7 x 1,9 x 3,94 m Hydraulic guillotine shear with - Control system: Siemens OP7 - Cutting gap adjustment - Cutting length adjustment - Shadow line lighting - Support arms Nodpszgihbefx Ac Tjcu - Sheet support system - Sheet conveyor belt - Scrap diverter

Condition: used, Edwards Truecut 10 x 3000mm Shear Capacity mild steel 10mm Nodezdicdjpfx Ac Tjcu Capacity in Stainless Steel 8mm. Capacity in Aluminium 13mm. Powered backgauge Elgo readout Shadow line Wandering foot pedal 1 x squaring arm 2 x support arms Rake adjustment Rear safety fencing

Condition: used, Adira GH0640 4000mm x 6mm Guillotine (2015) Maximum Mild Steel Capacity (450 N/mm²) 6.5 mm Maximum Stainless Steel Capacity (700 N/mm²) 4.0 mm Cutting Length 4,050 mm Frame Gap 260 mm Blade Clearance Adjustment 0.05 – 1.1 mm Number of Hold-Down Cylinders 19 Backgauge Range 1,000 mm Cutting Angle (Rake Angle) 1° 3' Machine Length 4,980 mm Machine Width 2,840 mm Nodozdgnzspfx Ac Tecu Transport Width 2,180 mm

Condition: good (used), Mubea Muhr und Bender section shear combined Ncodsncc Hujpfx Ac Teu Type: KBL 16 Dimensions: 200x75x197 cm LxWxH

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 108461, EHT Trumpf hydraulic sheet metal shear, type TrumaCut 460 working width 6050 mm max. sheet thickness 4 mm steel Cybelec CNC control, type DNC 60-GS pneumatic sheet support device motorized back gauge Ncjdozf Ifispfx Ac Tou automatic shear gap adjustment automatic angle adjustment side gauge 6000 mm

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm Ncsdpfjxaa Dgox Ac Teu - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Njdjydk Acjpfx Ac Tscu Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor -Type: SK 62-180 L/4 i 11.59 -Speed: 127 rpm Ncedpfx Aot Ddd Soc Tsu -Engine: Nord Type SK 180 L / 4 -Power: 22.0 kW / 1450 rpm -Protection class: IP55 -Shaft: Ø 65 x 130 mm -Dimensions: 1030/430/H425 mm -Weight: 243 kg

Condition: used, functionality: fully functional, Year of construction: 2007, Motorized Swivel Bending Machine Nedpfxozgfq Sj Ac Tecu Manufacturer: OZAMECH, Type: KM-6/3000 Year of manufacture: 2007 Technical data Manufacturer: Ozamech Type: KM-6/3000 Year of manufacture: 2007 Sheet metal width: 3020 mm Sheet metal thickness: 6.0 mm Upper die stroke: 400 mm Dimensions: approx. L 4.55 x W 2.30 x H 1.70 m Weight: 7.7 t Equipment - Manual crowning - Siemens S7 control - Controlled rear stop, 1000 mm - Bending rail, 60 mm - Sharp edge rail, 45° All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1990, 50 t. weight 1,8 t Ncodpfx Aszf Nuroc Tju hydraulic ja round bar steel 40 mm

Condition: used, Year of construction: 1972, Dreh-Øüber Bett 400 mm Dreh-Øüber Support 220 mm turning length 1000 mm spindle turning speed range 12,5 - 2000 U/min spindle taper Bajonett 55022 spindle bore 47 mm feeds - longitudinal 0,07 - 4,16 mm/U feeds - cross 0.035 - 2,08 mm/U thread - mm pitch mm thread - inch 2 - 24 Gang/ inch. rapid travel - longitudinal/face 3,4 / 1,7 m/min spindle drive 11 kW power capacity 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m Nsdjvzhhyjpfx Ac Tecu • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992

Condition: used, Year of construction: 1984, plate width 3100 mm plate thickness 6 mm distance between columns 3150 mm no. of strokes 20 - 75 Hub/min cutting angle 0,5 - 1,25 ° down holder 16 Stück voltage 380 V frequency 50 Hz power capacity 10 kW weight of the machine ca. 6 t Nedstv Ihqjpfx Ac Tjcu dimensions of the machine ca. 4,0 x 2,1 x 1,7 m with electr. back stop, 950 mm

Condition: good (used), RAS panel shear, 4m length, capable of cutting sheet metal up to 5mm thick, in good condition, with hold-down function. Ncedpfxszgf Uqj Ac Tju

Condition: new, Sheet Rack new Significantly less space required compared to stack storage Clear sorting of all sheets – no searching, no restacking Expandable with additional bays – grows with your business Clean, organized working environment – professional impression Easy handling thanks to castor at the rack entry Supplied as a kit – low shipping costs Robust steel construction – durable and load-bearing Technical data: Length 2500 mm Width 870 mm + 410 mm per additional bay Height 2390 mm Bay width 370 mm Images: show examples with and without extension bay Can be expanded with extension bays as needed: Price per bay €1080 + VAT Nodpfx Ajxllvxec Tecu Availability: Short-term from stock Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ V-rotor Njdpfoxavtdjx Ac Tocu Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 knives 40 x 40 mm Screen perforation: 15/20 mm Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection voltage: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: Automatic star-delta starter Automatic shut-off in idle mode Vibration-damping machine feet CE compliant Availability: short-term Location: Flörsheim

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used RAS motor-powered squaring shear, type 83.20, manufactured in 1987, serial number 46/2. Usable cutting length: 2040 mm x 3.0 mm Nsdszg Hq Hopfx Ac Tjcu - Manual back gauge, 500 mm - Front support with 2 tilting stops - Foot switch The machine is in stock at our warehouse in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used SCHRÖDER motor-driven sheet metal shear, type MHSU, manufactured in 1987, serial number 03779. Nedpfx Acszg Hn Se Tscu Usable length: 2000 mm Maximum sheet thickness: 2.0 mm - Manual back gauge, 500 mm - Foot switch The machine is in stock at our facility in 71334 Waiblingen-Beinstein and is available for immediate delivery.

Condition: excellent (used), Year of construction: 2012, Trumpf Trushear 5063 (2012) Guillotine Shear 3050x6mm Manufacturer: Trumpf Model: TruShear 5063 Year of manufacture: 2012 Condition: used, very good Control: ELGO P50 Cutting length: 3050 mm Sheet thickness: 6 mm / 4 mm for stainless steel Cutting angle: 0.5 – 2.8° Blade gap adjustment: 0.05 – 0.72 mm Automatic cutting angle adjustment Automatic blade gap adjustment Automatic blade gap compensation Hold-down devices: 20 pieces Strokes per minute: 18 – 38 Backgauge: 10-1000 mm, adjustable Total power requirement: 11 kW Oil capacity: 140 L Dimensions (approx.): L 4.00 x W 1.67 x H 1.90 m Njdpfx Acozgu Nqs Tscu Total weight: approx. 7.2 t Customs tariff number: 84615090 Sheet support device Sheet return device Small parts chute 3x support arms Light barrier Foot pedal Documentation

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m Holder for round bar (properly attached to the machine; if desired, we also have round bars in various lengths available as an option) Extendable front support Invoice with VAT shown Bending machine KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Attachment rail Round rollers and other rails According to §25a UStG The machines are in good used condition and are ready for immediate use. They come from a private owner and a small business (50/50). Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, round machining machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back stop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. Please feel free to contact us if you have any questions. Ncjdpfx Acszgua Ao Tou You will receive an invoice according to §25a UStG, which includes the sales tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and welcome after prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Article number: Bending machine KS & HT.

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. New list price 2024 – see pictures (now more expensive again) €18,490 net, excluding the radius beam. Features of the device: Press brake Schechtl HA Beam bends cleanly – testing possible Degree indicator Bending length slightly over 2m Sheet metal thickness 2 mm steel – sheet – aluminum, zinc, etc., up to approx. 3 mm Beam radius for aluminum, zinc is installed – a sharp beam is also included (see picture)! Optional: depth stop Sheet metal shear HT 200 or sheet metal shear Schröder electric 2m - 2.5mm would be optional. Important! Optionally, you can find and purchase many machines and machine accessories, such as various beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, rounding machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, backstop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice in accordance with §25 a UStG – the value-added tax is included in the invoice amount. Subject to differential taxation. Free loading is possible – weight approx. 1450 kg. Inspection and testing are possible and welcome after a telephone appointment has been arranged. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Ncjdezgt Nvspfx Ac Tou Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Article number: Press brake HA 200

Condition: excellent (used), Year of construction: 2013, Technical specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment Adjustable parallel stop NC control: Maper by BAYKAL Cuts per minute: 12 min. Sheet metal support device Side protection grilles Motor power: 22 kW Nedpfxszfx Nfs Ac Tocu Dimensions (length x width x height): approx. 4000 x 3000 (1800) x 2000 mm Weight: approx. 9.7 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1985, A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement. Nodpfx Aszf Nb Sec Tjcu