Used Single Phase Isolation Transformer 42V for sale (11,643)

Condition: like new (used), Year of construction: 2024, Oil hermetical distribution transformer - producer Elpro Energo, 1600kVA; 22/0,4kV, Dyn1, year of production 2024, functional, rutine test report, technical documentation. Nedpfeyl Ngiox Akuelb

Condition: used, Year of construction: 2008, cast epoxy resin, dry distribution 3 phase transformer - manufactured by TESAR Italy, 2000kVA, 15000 ( ± 2 x 2,5 %) /400V; Dyn5 ( possible to change to Dyn11 or Dyn1 ), IP00, year of production 2008, IEC losses, thermal protection device, project documentation and rutine test protocol, fully functional, manuals, total 3 pcs. Nledpfx Aksykb Ngsueb

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. Nlodey Su Itspfx Akujb POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: excellent (used), mileage: 695,160 km, power: 265 kW (360.30 HP), first registration: 05/2008, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro4, number of seats: 2, Year of construction: 2008, Structure Construction year: 2008 = More information = General information Cab: single Registration number: 2EBR229 Technical information Number of cylinders: 6 Front axle: Steering Rear axle: Double wheels Weights Empty weight: 14.880 kg Carrying capacity: 4.120 kg GVW: 19.000 kg Functional Njdpfxey Rfu Uj Akuslb Water tank: Yes Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Nedpfox A Imzox Akujlb Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Condition: used, Year of construction: 2006, machine/vehicle number: 191014, Power: 80 kW, unladen weight: 4800 kg Njdpjy Rvn Sefx Akuelb

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Nedpfeucpqtsx Akujlb Pneumatic material clamps Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm

Condition: used, Year of construction: 1997, machine/vehicle number: HGS-Single A 97 03 005 Pos.6, Description for the diagram: 1 – Infeed table with cleaning unit (air blower) and crosswise brush for table width, collects residual dust from components 2 – Roller coating machine No. 1 3 – Roller coating machine No. 2 Nlodpey Sn Srefx Akusb 4,5 – UV lamp with conveyor – one lamp illuminating from above 6 – Quick Wood System RO1400 brushing machine 7 – Venjakob spray booth – 8 spray guns 8,9,10,11,12 – Drying tunnel with mechanical top air supply via nozzles, temperature and airflow can be regulated in 3 zones 13,14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, curing the edges as well 15 – Four-shaft brushing machine with individual height and speed adjustment for each shaft 16 – Intermediate sanding outfeed table 17 – Cleaning unit (air blower) for light surface dust removal 18 – Venjakob spray booth – single-circuit, but can be switched to a second by exchanging the entire spray gun rack (a spare is included) and switching the pump (two pumps included) 19 – Roller conveyor; lineup supported by photoelectric sensors for loading the dryer 20 – 14-shelf drying oven 22 – Outfeed table with two speed levels depending on the unloading speed required by the finishing line.

Condition: used, machine/vehicle number: 008517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Nledpoy T Hpfjfx Akujb Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008417, Type of edging: Thin edge, Thick edge Nlsdpey D Af Djfx Akueb Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A Nlodpfxsw Tq Iws Akujb

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Nljdpfx Aksx Swf Ueujb Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Condition: used, machine/vehicle number: 008325, Position 1: Single Edgebanders HOMAG-EDGETEQ S-390 - LOOPTEQ O-300 Nsdpox Hpklsfx Akujlb Position 2: Panel Return Systems HOMAG-EDGETEQ S-390 - LOOPTEQ O-300

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B AIRTEC Nsdpjwukywsfx Akuolb Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B AIRTEC

Condition: used, machine/vehicle number: 008250, Position 1: Single Edgebanders BIESSE-STREAM B1 9.0 Position 2: Roller Conveyors BIESSE-STREAM B1 9.0 Position 3: Single Edgebanders BIESSE-STREAM B1 9.0 Njdpfx Ajx Dipmokujlb

Condition: used, machine/vehicle number: 007987, Position 1: Single Edgebanders HOMAG-HIGHFLEX 1650 Position 2: Panel Return Systems HOMAG-HIGHFLEX 1650 Nsdsx A Thqepfx Akuolb

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05 Nljdpfxox A Hi Io Akuob

Condition: used, machine/vehicle number: 008148, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Nodsxtugcspfx Akuslb Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 210 AMBITION 2274

Condition: new, Siemens 6SL3120-1TE24-5AC0 Single Motor Module 45A Version: C SN:T-P36206521, as good as new, never in use, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Nedpfxoxag Uro Akuslb

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Nedpfoy Spclex Akuolb Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: like new (used), 4 x stainless steel pressure tanks, insulated, temperature-controlled, with agitator connection Technical data / dimensions Available quantity: 4 Volume: approx. 4325 liters Tank type: Pressure tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,500 mm External diameter: approx. 1,700 mm Nsdpetv Rm Sefx Akuelb Cylindrical height: approx. 2,000 mm Total height: approx. 3,684 mm Weight: approx. 1,400 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: overpressure/underpressure Operating pressure: -1/+6 bar Test pressure: 7.5 bar Wall thickness bottom: approx. 8 mm Wall thickness top: approx. 12 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 700 mm Operating temperature: 150 degrees Celsius Material / composition Material inner jacket: V4A (1.4435) Material double jacket: V2A (1.4301) Feet material: Stainless steel Outer surface: Mirror polished Ra

Condition: used, Year of construction: 2012, operating hours: 4,445 h, Bomag BW80AD-5 roller from year 2012! German machine! ----* Manufacturer: Bomag * Model: BW80AD-5 * Year of manufacture: 2012 * Read operating hours: approx. 4,445 * Last service at approx. 4,350 operating hours * Operating weight: approx. 1,665 kg * Kubota diesel engine, 15.1 kW * Water sprinkling system * German machine * 1st owner * CE certificate and road approval available * Price: 8,900 EUR, net + 19% VAT ----For further questions please call: Nlsdpfx Aey N Iubskueb For more questions please call: Erik Kortum: WhatsApp All information without guarantee; errors and prior sale excepted.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: OM2339002, power: 750 kW (1,019.72 HP), rotational speed (min.): 745 rpm, input voltage: 5,000 V, input frequency: 50 Hz, input current: 112 A, type of input current: three-phase, overall weight: 8,800 kg, total length: 3,200 mm, total width: 1,700 mm, torque: 9,614 Nm, type of cooling: air, protection type (IP code): IP5K5, 2 pcs. medium-voltage three-phase asynchronous motors 5000V, also available separately. Location: 44866 Bochum. Inspection and test run possible by appointment. Nsdpfx Asy N N Szekuolb

Condition: excellent (used), Catalogue number 7734 TECHNICAL DATA - Shaft width: 630mm - Max. thickness of workpiece: 230mm - 4-knife planing shaft * from above: - Anti-kickback fingers - Toothed feed roller - Pressure bar - Planing shaft - Pressure bar - 2 smooth, driven outfeed rollers * from below: - Adjustable roller in bottom table - Motor approx. 7.5kW - Stepless feed speed adjustment - Extraction port diameter: 145mm - Dimensions (LxWxH): 1250x1300x1300mm - Weight: 908kg ADVANTAGES – Italian manufacture – Very good condition – Used thickness planer Nljdpfx Asy R A Uxokuob Net price: 21,900 PLN Net price: 5,200 EUR based on 4.2 EUR exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm Nlsdpfxsy Rutae Akueb ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m AS SPARE PARTS DISPENSER