Used Slm 280 Hl for sale (5,300)

Condition: used, Year of construction: 2021, functionality: fully functional, For sale: HSM 7009st baler and conveyor belt. Dedpfjy T Inpsx Abfouu

Condition: used, mileage: 29,800 km, power: 115 kW (156.36 HP), fuel type: gasoline, gearing type: mechanical, first registration: 07/1981, next inspection (TÜV): 09/2027, color: red, number of seats: 2, Equipment: all wheel drive, Original early fire service G-Class from second ownership, which has never been used for civilian purposes. TÜV and H-certification (according to §23 StVZO) passed in September 2025. Roadworthiness inspection (HU) valid until 09/2027 ("no defects found", approved by DEKRA). Year of manufacture: 1981 / First registration: 07-1981. Duedpfx Aoxthdzebfou Original mileage only 29,800 km. Used exclusively for fire service duty to date. Rapid Intervention Vehicle (VRW) with ZIEGLER bodywork and Knurz-Kirsch generator with 5 kVA capacity. German garage-kept vehicle, equipped with the original registration document (only 2 previous owners), continuously registered until autumn 2025. Manufacturer stated in the original papers as GFG "Geländefahrzeug-Gesellschaft", then a joint venture between Daimler-Benz and Steyr-Daimler-Puch in Austria. This is one of the last vehicles produced under this manufacturer designation; shortly afterwards, "Daimler-Benz" was listed as the vehicle manufacturer in the registration papers. In 1991, a complete MATTER roll cage was installed in the vehicle (properly recorded in the documents). Includes a small roof rack system for transporting long equipment items. The long 280 GE is the largest and most powerful model of the first G-Class series that could be ordered ex-factory as a Mercedes G-Class in the early years. The M110 inline six-cylinder petrol engine with 2,717 cc and 115 kW / 156 hp starts and runs well. 4-speed manual transmission with differential locks. Power steering. Maximum speed registered at 155 km/h. A power take-off is installed for operating the generator. The last primary use was transporting a portable pump (TS) along with suction hoses and accessories. Therefore, there are no rear seats and a cargo area similar to a truck. Unfortunately, no additional seats remain apart from the 2 front seats. According to the original documents, this is a "3-seater" and the vehicle registration type is listed as "Other special-purpose vehicle, fire service rapid intervention vehicle (VRW)." Unladen weight is specified as 2,360 kg. Permissible total weight (originally 2,900 kg) was increased in 1991 to 3,030 kg as per the records. Therefore, this 280 GE currently has a payload capacity of 670 kg. Overall vehicle dimensions: Length 4,395 mm / Width 1,700 mm / Height 2,150 mm. Tires: 205/80R16, in good condition. Fitted with winter tires bearing the snowflake symbol in accordance with current legal requirements (DOT 2018). The G does not have a tow hitch, but it is equipped with the necessary mounting bracket. Retrofitting/towing capacity information cannot be supplied, as the relevant fields for towing capacity in the original registration document are marked as "not applicable." According to oral information from the last owner, the Mercedes is accident-free; however, this cannot be documented in writing and is therefore passed on to the buyer as an oral statement only. The 280 GE was driven a considerable distance on the motorway to us and completed the journey without any issues. A new battery has just been installed. The off-road vehicle is immediately available and ready for new tasks. This offer is only valid for commercial customers, freelancers, public authorities, emergency services, agriculture, forestry, and similar self-employed professionals. Unfortunately, sales to private end consumers are not possible. Subject to prior sale and errors excepted.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Djdpfx Abey Tt Riefouu Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: good (used), Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Container rotating device: Welding rotating device on rail chassis Dusdoy Rtkdjpfx Abfou -Drive motor: -Load capacity: 3500 kg -Roller spacing: 280 - 1230 mm -Rollers: Ø 255 x 50 mm -Rolling speed: 0.0 to 0.75 m/min Right/Left rotation, Left rotation -Control unit: with hand control and foot pedal -Individual components: see photos -Transport dimensions: 1205/2330/H1010 mm -Weight: 830 kg

Condition: used, Year of construction: 2023, gebraucht 2023 6242 prompt, Zwischenverkauf v Italien 5400 € 1 Schwenkrahmen 2450x27x0,9 mm 35/70 m/min Djdpfxewiqpzj Abfjuu 220 mm 220 mm 260x140 mm rund 160 mm, quadrat 155 rund 95 mm, quadrat 95 mm 965 mm 1200 mm 1100 mm 1860 mm 240 kg demo machine / mint condition net price (price for new machine € 6.730,00) manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment OPTIONS: Roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,500 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 735 cm³, injection pressure: 1,481 bar, injection weight: 662 g, mold height (min.): 250 mm, ejector stroke: 250 mm, plate length: 650 mm, plate width: 1,050 mm, installation height: 850 mm, Machine in operational condition. Includes handling robot from ENGEL. Duedpfx Aboyuayrefju

Condition: used, Year of construction: 2000, operating hours: 89,978 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 60 mm, displacement volume: 848 cm³, injection weight: 763 g, mold height (min.): 350 mm, opening stroke: 950 mm, plate width: 1,300 mm, plate height: 1,080 mm, installation height: 950 mm, Engel ES 2050/350 HL-V machine immediately available. Machine can be inspected in operation. Includes handling robot. Equipped with 2 DS core pulls, 6 integrated heating zones, and 1 air valve. Dsdpox Ex Azjfx Abfsuu

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, 2-axis CNC lathe, manufactured in 1995, complying with CE standards Dusdpfx Abey S R Ayefou FANUC 0-T CNC control Flat guides ASA 6" Bar capacity: 62mm Maximum turning diameter over bed: 600mm Maximum turning diameter: 250mm Maximum turning length: 630mm Maximum spindle power: 15Kw Weight: approximately 5,000 Kg. Complete with: Hydraulic chuck Tailstock 12-position automatic tool turret Chip conveyor

Condition: like new (used), Year of construction: 2015, GDW LZ 280 VC Lathe GDW LZ 280 VC with GDW digital display, year of manufacture 2015, in very good original condition. The machine comes from the special construction division of a renowned German engineering company. CE-compliant!! Technical Data: Year of manufacture: 2015 📐 Working Area & Dimensions • Center height: 165 mm • Distance between centers: 670 mm • Swing over bed: 330 mm • Swing over cross-slide: 190 mm • Bed width: 220 mm • Machine weight: approx. 1,100 kg • Footprint (L x W x H): approx. 1,570 x 1,035 x 1,800 mm ⚙️ Main Spindle & Drive • Speed range: 30 – 5,000 rpm (infinitely variable) • Drive power: 7.0 kW to 7.5 kW • Spindle bore: 43 mm • Spindle nose: DIN 55027 (size 5) 🛠️ Carriage & Tailstock • Cross slide travel: 165 mm • Top slide travel: 115 mm • Swivel range of top slide: +75° / -65° Dsdpfx Asy Sbqnjbfouu • Tailstock taper: MT 3 About the Machine: The GDW LZ 280 VC is the smallest machine in the GDW range. It is a lathe designed for the highest demands, featuring stepless speed control, constant cutting speed, and an impressive 7.5 kW drive power (at 40% duty cycle). This compact powerhouse excels in environments where space is at a premium but maximum precision is required, such as optics workshops, electrical and automotive workshops, laboratories, and even in Formula 1. Offered here is a GDW LZ 280 VC lathe with GDW digital display, year 2015. This lathe is in very good original condition. It comes from a company where it was only used occasionally for special construction projects. The machine features a very user-friendly control system. The guideways are regularly lubricated via central lubrication. The GDW LZ 280 VC has been mechanically and electrically tested by us. Take the opportunity to inspect and test the GDW LZ 280 VC under power on site. You can find more lathes from reputable manufacturers on our website.

Condition: excellent (used), functionality: fully functional, mileage: 642,989 km, power: 206 kW (280.08 HP), first registration: 11/2008, fuel type: diesel, empty load weight: 8,590 kg, maximum load weight: 7,410 kg, overall weight: 16,000 kg, tire size: 285/70R19.5, axle configuration: 2 axles, wheelbase: 4,700 mm, axle spacing: 4,700 mm, next inspection (TÜV): 03/2027, fuel: diesel, brakes: retarder, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 8,600 mm, total width: 2,600 mm, total height: 3,200 mm, loading space volume: 31 m³, loading space length: 6,450 mm, loading space width: 2,450 mm, loading space height: 1,980 mm, Year of construction: 2008, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, compressor, cruise control, differential lock, fog lights, full service history, onboard computer, parking heater, power assisted steering, retarder, seat heater, soot filter, tachograph, tail-lift, truck registration, Model: VOLVO FL-280 4x2 16Tons EURO5 with roll-up doors Tail lift: ZEPRO Z 200-136 MA Load capacity: 2,000 kg First registration: 25.11.2008 Mileage: 642,989 km Engine power: 206 kW Displacement: cm³ Auxiliary heater Antenna Radio/cassette/CD/MP3 Air conditioning Air-suspended, fully adjustable seats with seat heating Dodpfxsy Rz Dxs Abfouu Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High beams Hazard lights Storage box Aluminum fuel tank Emission class: EURO 5 AdBlue Retarder/intarder/engine brake Drive configuration: 4x2 Differential lock Wheelbase between axle 1 and axle 2: 4,700 mm Tyre size front axle (1): 285/70R19.5 Tyre size rear axle (2): 285/70R19.5 Leaf/air suspension Wheel covers Unladen weight: 8,590 kg Payload: 7,410 kg Gross vehicle weight: 16,000 kg Overall vehicle dimensions (L x H x W): 860 cm x 320 cm x 260 cm Body dimensions, external or internal (L x H x W): 645 cm x 198 cm x 245 cm Cargo space volume: 31 m³ All our vehicles listed are generally provided with valid technical inspection (TÜV) and emissions test certificates. Usually these are foreign inspection documents, which are sufficient for obtaining export number plates. For a technical inspection (TÜV) and emissions test according to German standards, please clarify with us on a case-by-case basis. You can also contact us for further information and photos via WhatsApp, Telegram, Viber, and Signal. Please call us directly or send us a message via WhatsApp! German (Deutsch): We speak German and English, but feel free to send us a message in your language! English: We speak German and English, but feel free to send us a message in your language! Español: Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português: Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français: Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italiano: Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский: Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! العربية: نحن نتحدث الألمانية والإنجليزية، لكن لا تتردد في إرسال رسالة إلينا بلغتك! دری: ما به آلمانی و انگلیسی صحبت می‌کنیم، اما می‌توانید پیام خود را به زبان خود برای ما ارسال کنید! Trade-in possible! Net price! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can arrange worldwide shipping for your vehicle! Export license plates available on request! We support you with export, original data confirmation for country homologation, supplier's declaration, export document preparation, and customs number plate creation, if required. Viewings and test drives are possible anytime, including weekends, by prior telephone arrangement! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and equipment of the goods/vehicles. All information is provided without guarantee. Subject to changes, prior sale, and errors.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer Max. Sheet Size X : 1040 mm Dsdjrp D Nlopfx Abfsuu Max. Sheet Size Y : 1420 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 70-100 m/min

Condition: ready for operation (used), machine/vehicle number: YV2V0Y1C8EB691499, mileage: 154,665 km, first registration: 04/2014, fuel type: diesel, empty load weight: 14,375 kg, maximum load weight: 11,625 kg, overall weight: 26,000 kg, tire size: 315/80R22,5, axle configuration: 6x2, color: yellow, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, hydraulics, Dear Sir or Madam, We are pleased to offer for sale a Volvo heavy-duty truck fitted with a specialist Geesink Norba refuse collection body. Vehicle specifications: Emission standard: EURO VI First registration date: 30/04/2014 Mileage: 154,665 km Transmission: Allison automatic Fuel type: diesel Suspension: steel–air Gross vehicle weight (GVW): 26,000 kg Curb weight: 14,375 kg Payload capacity: 11,625 kg Engine power: 280 HP Body: Geesink Norba Type: GPM III v 20H25 Year of manufacture: 2014 Serial number: 2140069 Vehicle dimensions: Length: 9.40 m Width: 2.50 m Height: 3.43 m Dedpfx Abjxq A Rkofeuu Equipment: ABS, differential lock, central lubrication, central locking, additional headlights, electric windows, electric mirrors, hydraulic power steering, engine brake, hydraulic system, immobiliser, retarder, on-board computer, manual air conditioning, reversing camera, additional lights, fog lights, sun visor, speed limiter, factory radio, adjustable suspension, reversing warning system, rotating beacons, tachograph, cruise control, multifunction steering wheel, dual rear wheels. We provide: - Post-sale vehicle servicing - Maintenance and repair of equipment purchased from us - Worldwide transport On request, we offer: - Engine oil and filter change for the truck - Oil and filter change for the refuse body Additional service: As a market leader in Central Europe specializing in the sale of municipal vehicles and equipment, we invite you to benefit from our extensive experience, including brokerage in the sale of your surplus municipal equipment. On your behalf, we will handle: - Customer communication in several foreign languages - Preparation of sales and post-sales documentation - Organization of road and sea transport - Customs documentation (customs clearance, Eur 1, T1) - Preparation of vehicles for sale Leasing available for older vehicles, up to 18 years old. If you wish to receive more details, please contact us.

Condition: excellent (used), Year of construction: 2011, operating hours: 5,303 h, functionality: fully functional, machine/vehicle number: 5847, travel distance X-axis: 600 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 550 mm, table length: 450 mm, type of input current: three-phase, table load: 350 kg, overall weight: 5,500 kg, workpiece weight (max.): 350 kg, input frequency: 50 Hz, controller manufacturer: Heidenhain, controller model: TNCi530i, operating hours of spindle: 5,303 h, Equipment: documentation/manual, rotational speed infinitely variable, High-Speed Milling Machine HSC500/3 HSC500 - 3 Axis Annual maintenance Spindle operating hours HVC140: 5303h Travel range X/Y/Z: 700/590x580x360 mm Actual machining area: 580x530 mm Table area: 550x450 mm Workpiece weight: 350 kg Distance table to spindle nose: 160/520 mm Machine dimensions (W x D x H): 3200x2250x3000 mm Rapid traverse: 30 m/min Equipment: Heidenhain iTNC530i control Prepared for dust extraction Tool changer with 60 stations, HSK40 (Minimum quantity lubrication) Adjustable air nozzle Djdpfx Abey R U Azofeuu Tool length measurement with Blum laser Workpiece measurement with Renishaw OMP-400 touch probe Additional lighting Electronic handwheel with enabling switch Milling spindle: Steptec HVC140-15/42 42,000 rpm, 5303 operating hours MMS Lubtools 3 kW cooling system Loading door at rear of machine Length compensation, temperature compensation for accuracy package Warranty: 3 months (milling spindle excluded) Transport, commissioning, training Options on request

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL Year: 1999 (1990) POLYMERIZATION SYSTEM. Consists of 2 UV dryers: Dryer 1 Overall length: 2100 mm Overall width: 2339 mm Workpiece sizes: min. 250x20 mm, max. 2500x1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: each lamp 80 W/cm² Radiation length: 1400 mm Lamp power: 2 x 11.2 kW Air-cooled housing, output: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Belt conveyor Venjakob, year 1999, type Novo 40 Length: 2100 mm Working width: 1300 mm Duedpfx Ajyalc Nobfou Working height: 880 - 920 mm Feed: 0.75 kW Feed speed: 4 – 20 m/min (line 2 - 4 m/min) Dryer 2 Overall length: 3340 mm Overall width: 2339 mm Workpiece sizes: min. 250x20 mm, max. 2500x1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: each lamp 80 W/cm² Radiation length: 1400 mm Lamp power: 2 x 11.2 kW Air-cooled housing, output: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Belt conveyor Venjakob, year 1999, type Novo 40 Length: 3340 mm Working width: 1300 mm Working height: 880 - 920 mm Feed: 0.75 kW Feed speed: 4 – 20 m/min (line 2 - 4 m/min) Common control cabinet for both drying tunnels: 2000 x 1600 x 600 mm Operating voltage: 400 V, AC, 50 Hz, 3-phase Total power consumption of the complete UV system approx. 50 kW Operating side of the system: left Total weight of the complete system: approx. 2500 kg (Technical data subject to change and errors excepted. Prior sale reserved.)

Condition: used, Year of construction: 1996, cutting diameter 280 mm capacity 90 degrees: flat 280 x 160 mm capacity 90 degrees: square 240 x 240 mm band length 425 x 40 mm capacity 45 degrees: round 180 mm capacity 45 degrees: flat 150 x 250 mm Duodey N D H Tepfx Abfju capacity 45 degrees: square 170 x 170 mm total power requirement 1,8 kW weight of the machine ca. 450 kg dimensions of the machine ca. 1,4 x 0,8 x 1,0 m

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,239 h, load capacity: 5,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Dsdpfxevtuw So Abfouu Condition: Ready for use and fully functional Technical condition: good Side shift, fork positioner, 3rd valve, 4th valve, windscreen, half cabin, heating, full cabin, full free lift,

Condition: new, functionality: fully functional, power: 4.3 kW (5.85 HP), gearing type: other, fuel type: gasoline, color: red, empty load weight: 150 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB Heat Air Lance HL-1 | Professional Asphalt Heat Tool – Road Repair, Crack Sealing & Surface Preparation Equipment The TICAB Heat Air Lance HL-1 is a high-performance gas-powered heat lance designed for asphalt surface preparation, crack cleaning, preheating joints, weed removal, asphalt softening, and bitumen reheating. A must-have asphalt heat tool for road contractors, paving crews, municipalities, utility companies, and surface maintenance professionals seeking efficient heat applications and improved bonding results. Key Features • Heat air lance / asphalt heat tool for asphalt warming, crack prep, and surface softening • High-temperature flame output for consistent heating of asphalt, bitumen, and sealing joints • Gas-powered design for mobile, flexible operation on job sites • Ideal for pre-repair heating, loosening old asphalt material, surface drying, and bitumen melting • Compact, lightweight, and easy to handle for precision work in tight spaces • Durable construction built for heavy-duty road maintenance applications Applications Dsdpfx Asx U Ayvebfouu • Asphalt surface preparation before crack sealing or patching • Preheating asphalt joints and edges for improved sealant adhesion • Weed removal and surface cleaning ahead of maintenance • Softening old asphalt, bitumen reheating, and material conditioning • Municipal roads, highways, parking lots, driveways, sidewalks, bike paths, and industrial areas Why Choose TICAB HL-1: HL-1 combines powerful heating performance, mobility, and precision to deliver superior asphalt surface prep and crack sealing readiness. It is designed to improve sealant adhesion, accelerate repair workflows, and enhance overall pavement maintenance quality — making it a trusted choice for contractors and municipal crews focused on efficient, professional road repair results. The TICAB Heat Air Lance Contact us now for price, delivery options, and full technical specifications. Boost your asphalt prep and repair workflow today!

Condition: used, Year of construction: 2000, cutting diameter 250 mm dimensions of saw-blade 450 x 45 x 2,0 mm cutting width 280 x 200 mm capacity 45 degrees: round 180 mm capacity 45 degrees: square 170 x 200 mm Dodoy Nnv Sjpfx Abfeuu cutting speed 16- 32 m/min power requirement 1,3 kW dimensions 1,3 x 0,55 x 1,0 m weight 180 kg Used hook saw in good condition - less used, only for our own light use. - 1x extra saw blade - manual lenght stopper - angel cut - coolant system - automatic stop - hyd. movement of saw blade

Condition: used, mileage: 352,600 km, power: 74 kW (100.61 HP), first registration: 02/2013, fuel type: diesel, maximum load weight: 900 kg, overall weight: 2,800 kg, axle configuration: 4x2, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,800 mm, loading space height: 1,750 mm, Year of construction: 2013, - Used Truck: Ford Transit 280 Van L2 H2. - Year: 2013, Engine: 2.2 TDCi 100hp Euro 5, 6-speed gearbox, Km: 352,600. - Van L2 H2, Load compartment dimensions: 2,800 x h. 1,700 mm, Full-height side paneling and load floor lining. - Equipped with: Air conditioning, Radio-CD, Central locking, Fog lights, Spare key set, Spare wheel, Driver airbag, ABS, ESP. - Bodywork has dent on right sliding door and wheel arch, interior in good condition, mechanically running, brand new turbo just replaced. Front tires 80% - Rear tires 85%. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy. Opening hours: Monday to Friday: 8.30 am / 12.15 pm - 2.00 pm / 7.00 pm Saturday: 8.30 am / 12.00 pm - 2.00 pm / 5.00 pm - Mileage Certificate. - Test drives available by appointment. - On-site ownership transfer. - Personalized financing options available. Carlo Mauri Srl declines all responsibility for any unintentional errors in this advertisement, which does not constitute any contractual obligation; listed prices are exclusive of VAT and registration fees. Duodpfx Asyy Nkfobfju

Condition: used, mileage: 352,600 km, power: 74 kW (100.61 HP), first registration: 02/2013, fuel type: diesel, maximum load weight: 900 kg, overall weight: 2,800 kg, axle configuration: 4x2, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,800 mm, loading space height: 1,750 mm, Year of construction: 2013, - Used Truck: Ford Transit 280 Van L2 H2. - Year: 2013, Engine: 2.2 TDCi 100hp Euro 5, 6-speed gearbox, Km: 352,600. - Van L2 H2, Load compartment dimensions: 2,800 x h. 1,700 mm, Full-height side paneling and load floor lining. - Equipped with: Air conditioning, Radio-CD, Central locking, Fog lights, Spare key set, Spare wheel, Driver airbag, ABS, ESP. - Bodywork has dent on right sliding door and wheel arch, interior in good condition, mechanically running, brand new turbo just replaced. Front tires 80% - Rear tires 85%. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Dodpfoyrp U Hex Abfouu Sales Contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy. Opening hours: Monday to Friday: 8.30 am / 12.15 pm - 2.00 pm / 7.00 pm Saturday: 8.30 am / 12.00 pm - 2.00 pm / 5.00 pm - Mileage Certificate. - Test drives available by appointment. - On-site ownership transfer. - Personalized financing options available. Carlo Mauri Srl declines all responsibility for any unintentional errors in this advertisement, which does not constitute any contractual obligation; listed prices are exclusive of VAT and registration fees.

Condition: excellent (used), Year of construction: 2016, Engel e-Motion 740/280 T WP with TecnoMatic Robot / All-Electric Machine / Operating hours: approx. in automatic mode Year of manufacture: 2016 Injection unit: Screw diameter: 50 mm Shot weight: approx. 360 g Injection pressure: 1900 bar Plasticizing volume: 393 ccm Clamping unit: Clamping force: 280 t Tie bar spacing: 780x780 mm Platen size: 1100x1100 mm Ejector: electric Clamping system: toggle lever Control: CC 300 touchscreen Dodsy Sl I Rjpfx Abfeuu Additional equipment: Production line with TecnoMatic robot Machine in very good technical condition All-electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface 5x air valve 4x hydraulic core pull Control with 64 hot runner zones Injection unit is wear- and corrosion-resistant Main drive - servomotor with inverter for energy savings Central lubrication Parallel movements Automatic mold height adjustment TecnoMatic Medium Robot Year of manufacture: 2020 6-axis robot: all axes (X, telescopic Y, Z, A, B, C) driven electrically by servomotors Touch control panel Robot safety package Robot equipped with adapter, conveyor belt, and protective casing Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 17,200 kg LxWxH: 7.37x2.10x2.30 m All machines offered are powered up and tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection Unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1,834 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-bar-less machine Hydraulic core pull x 3 Controller with 16 hot runner zones Injection unit hardened – bimetallic Machine regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All machines offered are started by our service technicians before sale. A video of the technical tests for the selected machine can be provided or you can participate in live technical tests at our premises in Łódź. Price: On request Dodpfx Aey Sl I Dobfeuu

Condition: used, mileage: 206,000 km, power: 96 kW (130.52 HP), first registration: 05/2019, fuel type: diesel, overall weight: 2,800 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,550 mm, loading space height: 1,300 mm, Year of construction: 2019, - Used Truck: Ford Custom 280 Van L1 H1 Trend. - Registered in May 2019, Engine: 2.000 TDCi 130 HP Euro 6, 6-speed manual transmission, Mileage: 206,000 km. - 3-seater van L1 H1, Cargo area dimensions: 2,550 x h. 1,300 mm. Bulkhead with flap for transporting long items (530 mm), load compartment floor and half-height side panels lined. - Trend trim level, equipped with: Air conditioning, SYNC 2.5 Radio-Bluetooth with USB, fog lights, LED daytime running lights, front and rear parking sensors, cruise control, central locking, on-board computer, double keys, spare wheel. - Vehicle fitted with 3 foldable roof bars + security locks on the load compartment external doors. Excellent bodywork and interior condition. - Timing belt kit and full service replaced at 185,000 km. - MOT valid until May 2027. One-owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00 Saturday: 8:30 / 12:00 - 14:00 / 17:00 - Certified mileage. - Test drive available by appointment. - Ownership transfer handled on site. - Personalized financing options available. Carlo Mauri Srl declines any responsibility for any unintentional inconsistencies in this listing, which does not constitute a contractual commitment. Prices shown exclude VAT and transfer of ownership costs. Dsdsy R Nldjpfx Abfeuu

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control: Siemens 840 D Travel distance X-axis: 1,000 mm Travel distance Y-axis: 800 mm Travel distance Z-axis: 800 mm Tool changer: 80-fold Tool holder: HSK 80 Max. tool weight: 25 kg Max. tool length: 500 mm Duedpfxey Nzh Us Abfsu Max. tool diameter: 228 mm Spindle speed up to: 6,000 rpm Pallet dimensions: 630 x 630 mm

Condition: new, Precision cycle lathe with Siemens Sinumerik 828 D control system Brand: GDW Model: C 280 Z conturline with quick-change tool holder size B Condition: New machine Built to the highest safety standards Standard equipment includes: - LED tube light - Electromechanical holding brake for the main spindle, programmable or operable via push button on the control panel - Coolant system - Quick-change tool holder size B, including one turning tool holder size B - Reducing sleeve for main spindle internal taper ME 50 / MT 3 - Protection flange for spindle head DIN 55027-5 - 2 fixed center points MT 3 - Set of operating tools with tool bag, set of keys, grease gun - Operating manual with spare parts lists, electrical documentation in paper and CD format Duodpfx Absxy Ryfefju