Used Soco System Control System for sale (57,817)

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. In very good technical condition, after total renovation. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Bwodpfx Adeyzfkks Ael Machine in is at our premises, testing on-site is possible. Max Sheet Size: Width: 2200 mm (87") Min Sheet Width: 70 mm (3") Electrics: 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 50 L/min

Condition: used, Leybold A700 Q deposition system (ebeam) Leybold A700 deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit (Leybold) Vacuum pump Leybold D40-65B + Diffusion pump 2kW Proceschamber: Size: Width 680mm x Height 680mm x Depth 550mm Substrateholder diameter 650mm Incl. shielding Oring door Heaters Basepressure low 10-6mbar Electronics: Baseline cabinet (eneeds upgrade) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Bwedpfeuhcnijx Ad Ajl Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 37.500,-

Condition: used, UHV deposition system (ebeam sputter) UHV deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit is removed Cryopump and prepump is removed Loadlock: for samples round 75mm Incl. sample heater 450l/s turbomolecular pump (Leybold) Proceschamber: Size: Width 680mm x Height 750mm x Depth 590mm Incl. shielding Double oring door (partially pumped) Heaters Basepressure low 10-7mbar, high 10-8mbar Electronics: Baseline cabinet (e-beam unit removed) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. Bodpfx Aouhcn Njd Ajwl EUR 55.000,-

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Bsdsv Sa Utspfx Ad Aswl Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order.

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V04PL0099, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation Bjdpoyy A Hgefx Ad Aswl * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: excellent (used), RENISHAW System 3R-656.31-3 Macro probe with 3 mm stylus ball. Used. Fully functional. Bwodjyk T Hdepfx Ad Ajl

Condition: excellent (used), RENISHAW System 3R-656.31-5 Macro probe with 5 mm stylus ball. Used. Fully functional. Bwedpfx Adjyk T Ets Ajl

Condition: excellent (used), 3 pieces Collet chuck adapter, 20 mm shank, equivalent to 3R-653 Mini holder chuck adapter 3R-653 for 20 mm shanks Incl. drawbar Equivalent to: Manual chuck adapter, Macro-Mini, 3R-653 Incl. 3 pieces drawbar 3R-605.1E Bwsdpfx Adow E Hics Ajl Unit price: €200

Condition: excellent (used), System 3R -772 DYNAFIX pallet Used Bedjyk T Rcepfx Ad Aowl Fully functional

Condition: excellent (used), Width: 450 mm length: 1000 mm space requirement: 1050 x 550 mm height adjustable: 620 - approx. 1000 mm Bwsdod E Uctepfx Ad Ael

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm Bedpoyxhhysfx Ad Aowl work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Year of construction: 2018, condition: excellent (used), bestehend aus zwei Stück Zahnriemenachsen EGC-80-1300-BS-10P-KF-0H-ML-GK und vier Stück Linearführungsschienen HGR 20C 1705V9-10A00 mit HIWIM Linearblock HGW CCC 170 3W3-10200 Bodpfx Aeg Ixumod Aowl Zwei Unimotore 075E3C300BACAA075140 mit Zwei EMERSON UNIDRIVE M 701-3200050A

Condition: used, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,200 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2013, Equipment: crane, Tyre size: 385/65R22,5 Suspension: air suspension Bodpfjuc D Uasx Ad Aswl Rear axle 1: Steering Drive: Wheel Empty weight: 14.070 kg Carrying capacity: 27.930 kg GVW: 42.000 kg Mast: telescopic (3 parts) Make of bodywork: PALFINGER PK 24001

Year of construction: 2023, condition: used, For sale: Near-new CNC sandblasting machine Kufra 2 1300 Manufacturer: SVC Italy Year of manufacture: 2023 (in operation since 12/2023 till 10/2025) Bsdpfxjyb Ibwj Ad Aowl Condition: 100% functional, like new, demonstration possible Dimensions: 5200 x 1300 x 2200 mm Weight: 850 kg Max. sandblasting height: 1300 mm Power input: 3 kW Air consumption: 1100 l/min at 6 bar Filtration: 6x built-in + 5x external air filters Operational modes: 3 modes (manual, full-surface, automatic with 6 programmable zones) Bonus: Consumables worth €2,000 included in the price!

Condition: excellent (used), Year of construction: 2020, Rex Cutting System RSS70 Bsdsyq Nmajpfx Ad Aswl The Rex Cutting System RSS70 is a perfect as a stand alone cutting device equipped with a three edged sickle knife that separates the sausage as the twist section perfectly with no rip to the product. Made from stainless steel ensuring it can be easily cleaned, the REX RSS70 is a highly successful cutting performance machine using either natural or artificial sausage casing. Simple and easy to use large touch screen PLC. Specification Throughput : up to 1200 cuts/min Portion Lengths : Min 40mm Max 800mm Calibre Range : 14 to 40mm Weight 260kg Perfect with all types of sausage filling.

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) 2) Construction & Materials Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Bodpfoyhxppjx Ad Aewl Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) 3) Performance (indicative / to be confirmed by serial datasheet) PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Large flow industrial HVAC networks

Condition: like new (used), functionality: fully functional, total length: 5,200 mm, total height: 1,700 mm, total width: 1,350 mm, overall weight: 950 kg, Equipment: safety light barrier, I am offering for sale a General System Pack packaging machine in excellent condition. It was purchased for a project that was cancelled after a short time. Bodpfxexw Ilge Ad Ajwl We were 100% satisfied with it during use. It served reliably, without any technical problems. It was always properly maintained and used in accordance with the manufacturer's recommendations, it is in excellent condition. It is currently out of service. The price of a new machine is €70-80,000 It can be used to package products of several types. It also allows packaging products in a protective atmosphere. It is intended for operations that focus on packaging one or several specific products, but also for operations with a large assortment of packaged products. Usable packaging material: BOPP foils, perforated and laminated foils, foils with a paper or aluminum layer, PE foils (with PE welding).

Year of construction: 2009, condition: ready for operation (used), Laminator Control-ing BL 1600 ref 2741EU Year – 2009 Max sheet size – 1650 x 1600 mm Min sheet size – 500 x 600 mm Max speed – 10,000 sheets/hour Bsdpeyu Suzsfx Ad Ajwl Top sheet thickness 100 – 600 g/m2 Reel-to-sheet Press delivery Flip flop stacker

Condition: excellent (used), Year of construction: 2017, overall weight: 315 kg, total length: 1,840 mm, total width: 1,180 mm, total height: 1,000 mm, VRF SYSTEM PANASONIC U14ME2E8 40 KW Bodpfx Adsqz Ucis Aewl Cooling capacity: 40 kW (27/19°C - 35°C) Heating capacity: 45 kW (7/6°C - 20°C) Year of manufacture: 2017 Type of refrigerant: R410a Number of fans: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Dimensions: 1.84 x 1.18 x 1.00 m Weight: 315 kg Condition: Excellent CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), 3 pieces Soco roller conveyor galvanized steel version with approx. 2 m length and 3 pieces with approx. 1 m length. -Usable width approx. 0.50 m. Bwedpfx Ash E Tn Dsd Ajl -Adjustable in height and inclination.

Condition: used, Year of construction: 1975, filling amount ca. 250 l basket dimensions 560 x 260 x 40 mm dimensions of the machine ca. 1,25 x 0,70 x 1,20 m Bwodpfxoym D Ahs Ad Ajl SYSTEM CHEMIE - T 50 Dive Wash Unit - Immersion Tank Dimensions: 585 x 385 x 500 mm - Draining Area Dimensions: 400 x 375 mm - 2x Storage Rack Dimensions: 400 x 350 x 210 mm

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: Bodoyhc H Uspfx Ad Aowl - Hopper and feed conveyor - Heat and Control fryer with deoiling belt - Flavour drum - Gas powered oil heater and oil pump. More information to follow.

Condition: good (used), axle configuration: 1 axle, first registration: 08/2020, loading space length: 10,000 mm, loading space width: 2,490 mm, loading space height: 2,670 mm, total length: 10,550 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275/70R22,5, wheelbase: 6,300 mm, color: blue, Year of construction: 2020, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 1, dual tires, payload: 19,250 kg, curb weight: 5,750 kg, gross weight: 25,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, color: blue, ABS, EBS, axle type: BPW, tail lift, tail lift type: rear liftgate, tail lift capacity: 2,500 kg, tail lift manufacturer: Zepro, tail lift material: steel, tail lift dimensions: 250x200, System Trailers manufacture, Kelberg brand = Additional Information = General information Cab: Day Registration number: OV-25-YB Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 275/70R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Double tires; steered; tire tread left inner: 8 mm; tire tread left outer: 8 mm; tire tread right inner: 8 mm; tire tread right outer: 12 mm Weights Unladen weight: 5,750 kg Payload: 19,250 kg gross permitted weight: 25,000 kg Functional Tail lift: Zepro, rear liftgate, 2,500 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offering covers all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Professional business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more… Please visit our website for special offers and the full inventory: Leasing via Kleyn Trucks is possible in most European countries! Bsdpfx Adev U T Rgo Aowl Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Compose IQ software. Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps. Bsdpfx Adjq T N T Te Aowl

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Bsdpfeya Hvqox Ad Aswl Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase