Used Soraluce Fs 8000 for sale (2,702)

Condition: used, This listing is for a Thermo Scientific MaxQ 8000 Orbital shaker incubator The unit is in full working condition and is ready for immediate release. The Thermo Scientific MaxQ 8000 is an orbital shaker incubator — a piece of lab equipment that combines controlled shaking and temperature control in one unit. It’s designed for biological and biochemical workflows where maintaining both a constant temperature and agitation are important, such as: - Cell culture (bacteria, yeast, insect or mammalian cells) - Fermentation - Protein expression - Hybridization and DNA work - Solubility studies and other mixing tasks How It Works - Orbital shaking: The platform inside moves in a circular (orbital) motion to mix or agitate samples evenly. - Temperature control: It incubates samples at controlled temperatures — typically from above ambient up to ~60 °C, and in refrigerated models also below ambient — so you can grow cultures or perform temperature-sensitive reactions. - Stackability: Units can be stacked 2–3 high to multiply capacity without using more floor space. Key Features Iisdpfxeylapno Apcja - Temperature range: Ambient +10 °C to ~60 °C (or lower if refrigerated version) - Speed range: ~25–400 rpm for shaking with accurate control - HEPA-filtered chamber: Promotes clean air and reduces cross-contamination risk inside the incubator for better culture conditions. - Slide-out platform: Makes loading and adjusting flasks easy. - Microprocessor controls: Digital display and alarms for monitoring temperature, speed, and time. - Typical Applications - Growing microbial or cell cultures - Protein expression studies - Hybridization reactions - Solubility assays - General mixing where precise temperature control is needed alongside agitation.

Condition: new, functionality: fully functional, The CU 260 FS is a multifunctional woodworking machining center that dramatically increases production capabilities even in workshops with limited space. This powerful and innovative machine is not just a combination of devices, but a complete integrated solution, replacing several machines and offering the full range of essential operations: planing, cutting/sawing, milling, and drilling/mortising. The main advantage of this model is the use of a spiral cutter block with replaceable carbide knives, which reduces noise levels by around 50% and extends the sharpness over 20 times compared to a classic straight-knife cutter block. Technical Specifications Voltage: 400 V Dimensions - width: 1600 mm Dimensions - depth: 2340 mm Dimensions - height: 1150 mm Weight approx.: 456 kg Planer Planing width: 250 mm Cutter block speed: 4,000 rpm Working height: 865 mm Number of knives: 24 pcs. Cutter block diameter: 75 mm Planer fence: 720 x 130 mm Fence tilt range: 90° - 45° Maximum chip thickness: 5 mm Motor power: 2.8 kW Motor power S1 100%: 2.0 kW Planer table length: 1,090 mm Thicknesser Thickness table length: 600 mm Thickness planing width: 250 mm Clearance - minimum material height: 5 mm Clearance - maximum material height: 185 mm Maximum chip thickness: 1.8 mm Feed speed: 8 m/min Extraction port diameter: 100 mm Drilling/mortising unit (CWM 250 series - optional) Drilling table size: 370 x 150 mm Westcott drill chuck: 0 - 16 mm Drilling depth: 90 mm Drilling width adjustment: 160 mm Height adjustment: 85 mm Extraction port diameter: 100 mm Circular saw Table size - width: 900 mm Table size - depth: 345 mm Working height: 865 mm Table extension: 600 x 460 mm Sliding table length - panel/roller: 1,600 mm Sliding table width - panel/roller: 240 mm Sliding table, carriage type: Panel Crosscut length / table travel: 1,600 mm Blade size: 250 x 30 mm Cutting height at 90°: 80 mm Cutting height at 45°: 60 mm Cutting width with guide: 910 mm Main saw blade speed: 4,750 rpm Extraction port diameter: 100 mm Motor power: 3.0 kW Motor power S1 100%: 2.2 kW Spindle moulder Spindle diameter: 30 mm Height adjustment: 110 mm Table opening: 170 mm Clamping length: 90 mm Max. profiling tool diameter: 150 mm Max. tenoning tool diameter: 150 mm Spindle speed min.: 1,400 rpm Spindle speed max.: 8,000 rpm Number of speed steps: 4 (1,400 / 4,000 / 6,000 / 8,000) Extraction port diameter: 100 mm Motor power: 2.1 kW Motor power S1 100%: 1.5 kW Scope of delivery Spiral cutter head with 24 TCT (carbide) knives Spare TCT knives (5 pcs) Planer fence Hold-down clamp Mitre cutting guide Spindle moulder guide Protective guard with extraction nozzle Iiedpfx Apjytc N Hjcja Connecting hose with Y-branch Aluminium fence with stop Circular saw blade 250 x 3.2 x 30 mm / 24 teeth Digital spindle speed indicator Push stick Tools

Condition: used, Year of construction: 1992, working width: 530 mm cutter head: Leitz - Centrofix number of blades: 4 surface table length: 2900 mm adjustment table: Hebel read out out table height: Scala surface fence tiltable: ja motor power: 4 kW machine length: 2900 mm machine width: 1000mm weight: 800 kg Iijdpfx Apeug Tytscja

Condition: used, mileage: 126,595 km, power: 228 kW (309.99 HP), first registration: 08/2007, fuel type: diesel, empty load weight: 13,255 kg, maximum load weight: 12,745 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 08/2026, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: air, number of seats: 5, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, low noise, onboard computer, parking heater, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, long cabin, suspension seat, rear window, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, cruise control, auxiliary heater, 8-speed manual gearbox, ABS (anti-lock braking system), ASR (traction control), constant throttle, PTO (power take-off), differential lock, fog lights, work lights, rotating beacon, storage box, fire extinguisher box, air suspension, trailer coupling with air & lighting connections, aluminum fuel tank, low-noise G1, last axle liftable, last axle hydraulically steered, underrun protection, side aluminum guards, hydraulic cross locking, crane behind cab, emergency stop, foldable, 2-point hydraulic outriggers, radio remote control, four hydraulic extensions, green environmental badge. Wheelbase: 4,800 mm. Body: Palift P16 double articulation hooklift system (year 2006) for containers up to 6 m (extendable underrun protection) & Palfinger PK 12502 C crane with remote control, fitted out for driving school. The vehicle was primarily used as a driving school truck! Load diagram: 4.3 m – 2,540 kg, 5.9 m – 1,710 kg, 7.9 m – 1,200 kg, 10.2 m – 890 kg, 12.4 m – 720 kg. Roller height approx. 1,350 mm. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Iiedpfeynl T Dsx Apcsa

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8271T, creasing machine Iisdpfxjykrvkj Apcsa

Condition: used, Year of construction: 2014, gearing type: other, first registration: 06/2014, mileage: 1 km, driver cabin: other, emission class: none, Direct contact / Used vehicles and equipment: * Wet salt flat silo spreader with * Container volume 1.8 m³ of spreading material * Brine tank approx. 750 l * Hydraulic drive * Twin auger feeding system Iijdpfx Aeymmvdspcoa * Fully route-dependent control system * Foldable spreading disc * PVC folding cover Other information: * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport and transfer. * No liability for printing or typographical errors. * Subject to error, modification, and prior sale. * Offer without obligation. * Photos may differ. Price applies to current condition. * All information provided without guarantee.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, NEW ARRIVAL Iodpfovz A Dcox Apceia 1 used hydraulic surface grinding machine GEIBEL & HOTZ FS 6040 The grinding area of the G & H FS 6040 is 600 x 450 mm - Year 2000 - Machine with automatic program cycle - rough grinding - finish grinding - spark out - return to starting position. Machine with 2-axis digital readout - stainless steel coolant system - various flanges - fine pole pitch magnetic chuck - including flanges suitable for Jung HF/JF 520. Machine complete with operating manual and wiring diagram - fully tested for functionality. Very little used machine from a test department (original paint). Pricing: ex stock, unpacked, uninsured, domestic sales plus VAT. Delivery time: immediate - subject to prior sale. Payment: as per usual trade terms - before collection - immediately after receipt of invoice. Best regards, Induba GmbH Mathias Becker

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, New arrival Hydraulic surface grinding machine Z&B Ziersch FS 2045 T, year 1988 Grinding range 500 x 200 mm – vertical feed – micrometer feed – electronic handwheel – automatic feed – digital readout. Automatic cross feed, both continuous and intermittent, micro-fine cross adjustment – magnetic chuck with demagnetization. Hydraulic overhead dresser – leveling feet – machine has been fully checked – all functions available – runs very smoothly! Electrical circuit diagram available. Pricing: ex stock – subject to prior sale and errors. Iijdpfx Apsk Ufz Nscoa

Condition: used, Workshop-overhauled Surface Grinding Machine GEIBEL & HOTZ Type FS 60 AC Machine no. 2012190398 Year of manufacture 1998 - 2025 Workshop overhauled by Stange Werkzeugmaschinen in 2025 Electro-magnetic chuck 600 x 400 mm Table clamping area 960/620 x 400 mm Table longitudinal travel max. 660 mm Grinding width 400 mm Iiedpfx Apjw Hhbcocja Cross travel with automatic feed max. 400 mm Cross travel manual adjustment max. 425 mm Distance spindle center to magnetic chuck max. 425 mm Table speed 2 - 28 m/min stepless Grinding wheel dimensions Ø 300 x 50 x 76 mm Manual vertical feed 1 division = 0.002 mm Manual cross feed 1 division = 0.01 mm Electrical connection 400 Volt, 50 Hz. - Electro-magnetic chuck GEIBEL & HOTZ, Type HPM 600 x 400, height 99 mm - Automatic depth infeed for surface and plunge grinding with digital actual value display - Depth infeed setting via decade switches - Cross feed for surface grinding motorized or manual via hand wheel - Hydraulic table longitudinal travel - Central lubrication for table longitudinal travel, Y and Z axis movements, and lead screws - Mounted grinding wheel Ø 300 mm (usable Ø 290 mm) - Separate electrical cabinet - Hydraulic unit integrated into machine base - Coolant system with paper band filter - Machine mounted on transport pallet for shipping Space requirements (L x W x H) 2850 x 2250 x 2500 mm Space requirements (L x W x H) 3000 x 2400 x 2500 mm Weight approx. 2 tons (complete) Very good condition – workshop overhauled by Stange Werkzeugmaschinen

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Dimension W x H x D: 135 x 260 x 235 mm weight: 27,5 Kg very good condition, from stock liquidation, unused 2 pieces available, price per piece Iodpfx Ajd D Dh Aspcoia

Condition: new, Deburring machine Make: Assfalg Model: FS 5 Iedpfx Ajb E Dc Hopcsia Condition: new machine Speed: 2,800 rpm Max. chamfer width: 3 mm Equipped as standard with: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating instructions

Year of construction: 1999, condition: good (used), Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 -Weighing range: up to max. 8000 kg -Load cell: 4x Tedea-Huntleigh 2000 kg -Quantity: 3 pieces available Iedpfx Apjykpageceia Price: per piece -Dimensions: 2500/1250/H130 mm -Empty weight: 472 kg/unit

Condition: new, empty load weight: 2,000 kg, maximum load weight: 8,000 kg, overall weight: 10,000 kg, loading space length: 6,000 mm, loading space width: 2,000 mm, total height: 540 mm, color: orange, Year of construction: 2026, TPW 8000 AL - Ace industrial heavy duty transport trailer Iodpfxjhbicws Apcsia length 6000 mm width 2000 mm Payload 8000 Kg All-wheel steering, wooden floor 30 mm, drawbar 1150 mm with 40 bolts, tires 425x150, paint RAL 2000, double-acting chock, stop 6 pieces on each side for load securing.

Condition: new, FAS roller conveyors 3000-510-450 RA2402 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Isdpowf I Tvjfx Apceia Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, FAS roller conveyors 3000-710-650 RA2403 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Iisdpfx Apowf Nf Hocea Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Iiodpfxjyluice Apcsa Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Year of construction: 1999, condition: excellent (used), Control system: CNC-controlled and manual operation Iijdpfx Ajlxyp Hjpcea PC P 2000 MMX-PCI Desktop ATX 15" color display, keyboard CNC-Turbo Roughness for WINDOWS TECHNICAL DATA Granite test plate (DIN 876) Length x Width 1200 x 500 mm Accuracy grade Grade 2 Flatness: 16.6 µm Weight 250 kg Linear traversing unit Waveline 60 Basic Measuring stroke 60 mm Resolution 0.014 µm Measuring column Wavelift 400 CNC Travel distance 400 mm Positioning repeatability < 10 µm Machine dimensions (W x D x H) 1.8 x 0.8 x 2.2 m Weight 600 kg EQUIPMENT/ACCESSORIES  Complete enclosure with electrically operated roller shutters  Granite plate 1200 x 500 mm  ISEL feed axis with ball screw  Workpiece support plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual for Waveline  Built-in kit for roughness measurement  Built-in kit for contour measurement  Various probes and holders for roughness and contour measurements  Machine table  Emergency stop button on the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the granite plate  Documentation

Year of construction: 1998, condition: excellent (used), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard CNC Turbo Roughness for WINDOWS TECHNICAL DATA Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy class: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear feed unit Waveline 60 Basic Probing range: 60 mm Resolution: 0.014 µm Measuring column Wavelift 400 CNC Travel range: 400 mm Positioning repeat accuracy: < 10 µm Machine dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT / ACCESSORIES  Completely enclosed housing with electrically operated shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manually adjustable for Waveline  Installation kit for roughness measurement Iiodpfx Apelxyqcjcja  Probes and holders for roughness measurement  Machine table  Emergency stop button on the machine table  Maintenance unit for compressed air preparation  Air damping elements for hard stone plate support  Documentation

Year of construction: 2011, condition: excellent (used), functionality: unexamined, machine/vehicle number: 24, For sale: Mixer – Raw material agitator from a pellet production line. Thanks to the mixer, the material supplied to the pellet mills is homogeneous. Line capacity where the agitator was used: approx. 8 t/h Mixer dimensions: External length: 6150 mm, External width: 1760 mm, External height: 2740 mm, Iisdpfx Apjwxatbscoa Internal length: 5000 mm, Internal width: 1490 mm, Internal height: 1750 mm, Ribbon diameter: approx. 1400 mm, Motor power: 22 kW, Agitator price: 25,000 Euro, We also offer a bag filter for the mixer, as shown in the production line photos. Filter price: 7,000 Euro, The machine can be inspected in: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, total height: 2,250 mm, total length: 2,000 mm, total width: 3,050 mm, grinding height: 300 mm, For sale is a CNC surface grinding machine of the brand Geibel + Hotz and type FS 415-Z SL The machine is ready for immediate use and fully functional Technical data Year of construction: 1999 Sanding range: 400*200*300 mm Operating voltage: 400/50 Hz/3 phases Control voltage: 2300/24 Volt Grinding spindle motor: 2 kW Table drive: electro-mechanical Cross-path drive: electro-mechanical Wheel bore: 51 mm Clamping width: min. 10/max. 30 mm Cone: larger D= 25 mm Mounting flange: Da= 108 mm Grinding wheel: 225*25*51 mm Clamping surface: 400*200 mm Dressing diamond: 0.75 carat Belt filter: Available Space requirement: 2000*3050*2250 mm On request, transportation and loading can be organized for an extra charge. Europe-wide can be organized. Prices plus VAT Iedpfx Apsuy Tkzoceia Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, functionality: limited functionality, machine/vehicle number: FS 40, total height: 420 mm, For sale is a Geibel and Hotz surface grinding machine The Z-axis feed has a problem, otherwise the machine is in good condition. Technical data: Slide / X-axis: Table stroke max.: 420 mm Table stroke min.: 150 mm Number of table strokes/min at 400 mm stroke: max. 54 Total length with all covers: 420 mm Z-axis: 205 mm Cover: FS 40 Hanging plates, number: 2 Length: 1270 mm Cross spindle: Pitch: Tr. 30 x 3 Handwheel scaling: 1 turn = 3 mm Handwheel limit switch: P - U1ST Fine adjustment: 0.020 mm Lubrication Spindle nut: Flat track: good Dimensions: Total height (with spindle protection): 2250 mm Height without spindle protection: 1850 mm Table width: 600 mm Total width: 1720 mm Table depth: 1310 mm If requested, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Iiedov E Hn Tspfx Apcsa For further information or contact options, visit us on our website

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Iveco S-Way AS260S50Y/FS CM 6x2 BDF swap body chassis Isdpfeyii Nvsx Apcjia Axle configuration: 6x2, 3 axles, trailing axle; Cab version: AS MY; Emission standard: Europe; Engine: Cursor 13, 500 HP Euro VIe; Transmission: 12-speed HiTroniX automated; GVW: 26 t; Drive axle type: SR single reduction, single axle; Full air suspension; Disc brakes; Additional axle: STER trailing axle, steered, single tires; Vehicle version: container chassis CM; Vehicle set-up: ON; Wheelbase: 4,800 mm; Emission norm: EURO VI E; DRIVE T. 315/70R22.5; Speed limiter: 90 km/h; Electrically operated roof hatch, transparent in MLL high roof; Manual cab tilt; Mirror cams cover for AS; FHS in vehicle color; Front underrun protection for chassis over 7,490 kg GVW; First aid kit; Plastic bumper; AS high roof cab; Standard cab roof insulation; Electronic immobilizer and second vehicle key; Dashboard: plastic with black trim; COC EC type approval; EC digital tachograph 4.1; Passenger seat static; Air compressor: 2-cylinder, 630 ccm, with integrated clutch, demand-controlled; Smart generator 2880 W (24V x 120A), demand-controlled; SR-SOLO LIGHT 17x; Batteries mounted horizontally on the frame; Standard air tank labels; Rear shock absorbers; Front axle: 8,000 kg / Rear axle: 11,500 kg (technically possible 12,000 kg) / Trailing axle: 7,500 kg (technically possible 8,000 kg); Front and rear stabilizer; Exhaust tailpipe to the left; Air filter unit under cab; Lift system for trailing or leading axle (TX/P); Ride height with 2nd setting; Rear underrun protection omitted; Trailer version for trailer operation with full braking system; Rear cross member; D-value: 130 kN; 24 volt trailer socket, 15-pin; Rear axle ratio: i 2.31; Connectivity Box 4G including TCO service contract; Engine idle cut-off; Tire pressure monitoring system (TPMS) with internal sensors; VDI interface (Vehicle-Data-Interface) for telematics services (FMS), Version 4.0; Infotainment 10" TFT display; ECO-Roll transmission software (freewheel function); GPS cruise control Hi-Cruise; Driver drowsiness attention warning system; Warning triangle as per ECE-27 specifications; Hill holder for comfortable starts on inclines; Electronic stability program (ESP); Reversing camera system; Blind Spot Information System (BSIS) on right; Intelligent Speed Assistance (ISA); Front object detection (MOIS); Advanced Emergency Braking System (AEBS); Preparation for alcohol ignition interlock (ALC) with wiring; NOISE ECE 51/03; Standard EU vehicle width; ECAS air suspension with 2 sensors; Speedline aluminum rims, SLT; Plastic parts of cab painted in cab color; Left and right luggage compartments; Transparent sun visor installed externally on cab roof; Additional water/diesel heater 4KW; Automatic air conditioning in conjunction with parking air conditioner; Standard refrigerator and storage box; Leather steering wheel; Curtains at bed; Air horn behind bumper (compressed air); Folding table in passenger area; Single-piece lower bed, firmness: hard; Upper bed with continuous mattress; Ashtray in center console, ...

Condition: used, mileage: 56,752 km, power: 308 kW (418.76 HP), first registration: 02/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Operating hours: 2,650h. ASR, BrakeMatic, monotone horn, rear view camera system with 7" colour display, two work lights each at the front and rear, LED beacon front and rear, preparation for central lubrication system, front attachment/weeds brush quick-change system prep, twin engine version with JCB 93KW auxiliary engine (Tier 4), dual-sided debris collection with gross volume of 8 m³, water system approx. 2,150 litres, gas-sprung suction hose arm 200mm, high-pressure washer 100 bar. Iodpoxpzthsfx Apceia

Condition: used, mileage: 112,556 km, power: 309 kW (420.12 HP), first registration: 05/2019, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2027, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Price including weed control attachment, ASR, BrakeMatic, single-tone horn, camera system for rear monitoring with 7" color display, two work lights each at the front and rear, LED beacon at the front and rear, preparation for front attachment/weed brush quick-change system, double engine version with JCB 93kW auxiliary engine (Tier 4), double-sided debris pickup with gross volume of 8 m³, water system approx. 2,150 liters, gas-sprung suction hose boom 200 mm, high-pressure washing system 100 bar, Iedpfx Apsrz Hp Rscjia

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 8,000 mm, total length: 10,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 9,200 kg, The PORĘBA TPK-90A1/8M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, inspection possible anytime Technical data: - distance between centers/turning length: 8000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg Iedpeyi U Rbsfx Apceia - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - installed inverter for slow-start - overall dimensions: total length: 10000 mm width: 1800 mm height: 1865 mm total weight: 9200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, (no steady rests) Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post