Used Spinner Tc600-65-Mcy for sale (7,587)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Nljdpfx Aaezfkbas Isc Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: used, Year of construction: 2007, Technical details: turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Spindle 1 max. bar diameter: 65 Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Accerories Spindle 1 Collet chuck Nlodpfxezd Tcwe Aa Ioc Spindle 2 Collet Chuck Chip Conveyor CNC turning center with 3 turrets and 2 spindles. There is an internal coolant system for the turrets with individual pumps *

Condition: excellent (used), Year of construction: 2018, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: 18-4 1023/R1581559, control type: PLC-controlled, bar diameter (min.): 5 mm, bar diameter (max.): 65 mm, type of input current: three-phase, We are selling an FMB TURBO 5-65/3200 "A" type rod feeder. Nsdpfjy Udd Nsx Aa Iolc The following sizes of complete nozzle sets are included with the feeder: D65; D50; D42; D25; D15; The machine can be inspected while in operation until July 25, 2026.

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling Nledpjydv I Dsfx Aa Isc • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Year of construction: 2017, condition: as good as new (ex-display), Flow meter for water Manufacturer: ABB Kent Messtechnik Type: 656 WP 4800 Pn: 16 bar Qn: 25 m3/h Nledpfx Asd Tg Szsa Ijc Ap: 0.3 bar 30 degrees 30 degrees

Condition: excellent (used), Countersink Manufacturer: Sassex 90 degrees Diameter: 65 mm Smallest hole to be countersunk: 27 mm Mounting: MK 4 Nedpfxod St Nws Aa Ielc Type: H 3 52.1-65 Overall length: 284 mm

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C33AEC509024, fuel type: diesel, motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 1.250 kg Functional Nsdpfezcuflex Aa Islc Generator capacity: 65 kVA Dimensions of cargo space: 230 x 113 x 162 cm CE mark: yes Other information Fuel consumption: 13.7 Liter/Hour Prime Generator: Caterpillar M2506118 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 219 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: excellent (used), Year of construction: 2000, HAUG Sauer Compressors AG High-pressure reciprocating compressor with associated pressure vessel and control cabinet Type: QTOX 120/65/35 WM-W Maximum final pressure: 66 bar Volumetric flow rate: 50 m³/h Rated power: 18.5 kW Rated speed: 1450 rpm Voltage/frequency: 400/50 V/Hz Year of manufacture: 2000 Maschinen- und Behälterbau GmbH Nedpfx Ajki Tzuja Islc High-pressure vessel up to 65 bar Type MB 00320-2.10 1000 liters Year of manufacture: 2017

Condition: good (used), mileage: 460,302 km, power: 176 kW (239.29 HP), first registration: 04/2008, fuel type: diesel, tire size: 265/70R17,5, axle configuration: 4x2, wheelbase: 4,860 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 8, emission class: euro4, suspension: steel-air, total length: 8,700 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 5,200 mm, loading space width: 2,430 mm, Year of construction: 2008, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp Nledpfx Aajzcvf To Iec - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8359 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 140 liters, Tow hitch, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of differentials: 1, Winch pulling force: 350 tons, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Red, Heated mirrors, Lighting type: Halogen lamp, Flashing lights, Engine power: 176 kW (236 Hp), Fuel: Diesel, Euro: 4, Transmission type: Manual, Gears: 8, Clutch pedal, Power steering, ABS, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: Terex 65.2 - A 2 L, Crane year of manufacture: 2008, Crane lifting capacity: 6000, Maximum load: ?, Number of outriggers: 2, CE-certified, Control position: Right-hand side control, Crane position: Behind the cab, Sliding: 2, Hydraulic additional connection: none, Load hook, HYDRAULIC RAMPS // ATLAS 65.2 A2L WITH REMOTE // MANUAL GEARBOX 8+1 // AIRCO // 6 CYL. = Additional Information = Axle configuration Tire size: 265/70R17.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 3 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Unladen weight: 8,359 kg Payload: 3,631 kg GVW: 11,990 kg Functional Crane: Terex 65.2 - A 2 L, Year of manufacture 2008, behind the cab Height of loading area: 107 cm Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2007, turning diameter 65 mm turning length 150 mm control Siemens 840D spindle passage 75 mm turning length 150 mm c-axis 2x 0,001 ° gripping station 65 mm speeds 5000 U/min rapid traverse 30 m/min turret (x-stations) 3x12 Number of axles 10 St. number of toolholder-holes 36 chip conveyor ja / yes kW coolant filtering unit ja / yes kW total power requirement 22 kW Nlsdpfxszdk Evs Aa Iec weight of the machine ca. 9 t dimensions of the machine ca. 4,4 x 2 x 2,3 + Iemca m DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: a large number of tool holders

Condition: used, fuel type: diesel, Year of construction: 2023, operating hours: 615 h, Drive: Track Please contact Kristoff Van Havere for more information Nlodpfxezb Uihe Aa Ioc - Hydraulic quick hitch CW10 - Bucket 1400mm with twin connect - Auxiliary pion for hammer and sorting grab - Central grease system - Cab with radio and airco

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 1: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part No.: 48875108 Single-stage volute casing pump with rated capacities according to EN 733, fitted with KSB IEC three-phase motor, protection class IP 55, insulation class F, assembled as a block unit. Pump shaft rigidly coupled to motor shaft. Equipped with uncooled mechanical seal, corrosion-resistant shaft sleeve, replaceable wear rings. Drive lantern made of cast iron, with contact protection in accordance with EN 294. Mounting by support foot up to motor size 112, by motor foot from motor size 132 upwards. Volute casing: Cast iron Nodpfxoxbhtlj Aa Ielc Impeller: Cast iron Shaft, pump: Tempered steel

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. Nljdpfx Aajt Hwq De Iec CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details.

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Nlsdpexbhtrjfx Aa Isc Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: used, Cutter Duker Rex Hydro 65 Made of stainless steel Distribution cabinet made of special steel, inside the machine Control box integrated in machine housing Noise-canceling cover Bowl capacity: 65 liters Njdpfewi Ixmex Aa Islc Electric power: 15kW Voltage: 380V / 50Hz 3 N/PE

Condition: like new (used), Cutter Manufacturer: Krämer Grebe Wetter Nedpfx Aaoxrvtze Ielc Stainless steel Capacity: 65 liters 2 knife speeds 6 knives Power: 25kW

Condition: used, Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover made of special steel, stainless steel Noise–canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment Nlsdpfsgqgkcex Aa Iec

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 10 h, Kilia 65 Liter Meister Plus Vario Condition: Factory Refurbished Warranty: 6 months manufacturer's warranty Manufacturer: Kilia General Description The Kilia 65 L Meister Plus Vario is a high-performance universal chopper for the production of fine and coarse sausages, emulsions, as well as vegetarian and vegan products. The machine is made entirely of stainless steel and meets the highest hygienic and technical standards. By using modern, energy-saving frequency converters in the drive technology, the machine enables precise control of the speeds while simultaneously reducing energy consumption – ideal for economical and sustainable production. Equipment, Knife Head: 6 knives Nljdpfx Aaezcuzmo Ijc Equipment, Chopper: Infinitely adjustable knife shaft drive: Forward: 50–5100 RPM Reverse (mixing mode): 50–500 RPM Bowl drive: 7–20 RPM Electronic central lubrication for knife and plate shaft bearings Noise protection cover and knife cover, manually operated, stainless steel Electric knife shaft brake Temperature-dependent end switch Cycle counter-dependent end switch Operation: Touch display with splash guard Operation: Button panel Drive power, knife shaft: 22 kW, 400 V (frequency converter controlled) Drive power, bowl: 1.5 kW, 400 V (frequency converter controlled) Integrated online service module for remote maintenance Dimensions and Weights Weight: 850 kg Dimensions: Diameter 1150 mm, Height 1160 mm, Height with knife cover open 1510 mm Scope of Delivery Kilia 65 L Meister Plus Vario – New Machine Standard Accessories: Wrench for knife head, cleaning brush, scraper Technical documentation

Condition: used, mileage: 160,847 km, power: 162 kW (220.26 HP), first registration: 02/2016, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro6, Equipment: ABS, crane, soot filter, Renault D14 220 3Skipper + Effer 65 2S crane Suspension: leaf-leaf Wheelbase: 3.75 m Effer crane Type: 65 2S 3x hydraulic extension 2x stabiliser points Nedpfx Aajyyrq Is Iolc We are also happy to assist you with financing/leasing options through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Nodsq T I Izopfx Aa Ielc Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: used, Year of construction: 2021, operating hours: 5,400 h, Equipment: all wheel drive, Komatsu D65EX-18E0 (2021) Nlodpfsytadhex Aa Isc * Engine power: 164 kW * Operating weight: 20,190 kg * Drive: Hydrodynamic (torque converter) * Undercarriage: EX version * with ripper The machine has only 5,400 operating hours and is in like-new condition.

Year of construction: 2026, condition: new, New OS-225-NX Nitrogen PSA Generator with the delivery for 505.2 Nm³/h at 5 bar (g) and a purity of 98.0 % (Other interpretations on request) Time of delivery 8 to 10 weeks Requirements for the compressed air supplied on site: Volume flow 20.21 m³/min Pressure 7 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 505.2 Nm³/h Nitrogen pressure: 5 bar (g) Purity: 98.0% Nledpfx Aowa I Ebea Ioc Equipment: Nitrogen Generator OS-225-NX Compressed Air - Pressure Dew Point Sensor Air-Purity-Control Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: ready for operation (used), Siemens 1FT5046-1AF71-3EA0 permanent magnet motor SN EF186446105001 + HE-65-M rotary encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Njdjl Syhgspfx Aa Ielc

Condition: ready for operation (used), Hainbuch TOPlus Kombi Axzug 65 3155011 / A073923.0000C clamping chuck, used, in good condition, 100% functional, delivery as per photos. Nljdpfxsx Erq Ss Aa Iec

Condition: ready for operation (used), Siemens 1FT5062-1AF71-4EB0 permanent magnet motor SN EF186446104001 + HE-65-M rotary encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Nsdpfx Asmbr Irea Islc