Used Staehle-Hess Saturn-Duo for sale (860)

Condition: used, Year of construction: 2023, Used system Lrodpfeyk I U Ajx Akuol Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: excellent (used), Year of construction: 2002, operating hours: 46,259 h, functionality: fully functional, machine/vehicle number: 11210001263, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 10,000 rpm, Control: Heidenhein Mill plus Clamping Table 1000 x 800 mm Taper HSK 100 Lrsdpfxjxzddte Akuel Toolchanger 120 position Exchange of tables : 2 tables Coolant tank: 2000l Machine is in running condition, machine has spindle coolig

Condition: good (used), Year of construction: 2017, operating hours: 971 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 971 km, MULTIPLE UNITS IN STOCK. This DUO electric stacker from LINDE, year 2017, has a capacity of 1,600 kg as a pallet truck. Lifts 800 kg up to a height of 1,010 mm. The stacker features INITIAL LIFT, making it ideal for uneven floors. All functions operate perfectly. ONLY 971 hours on the clock. The stacker comes with a 2023 battery featuring an automatic filling system and an INTEGRATED charger. Delivery within three working days. Ready for immediate use and, if desired, supplied with inspection certificate. Video to follow. Ledpfx Asxz Ebtokuorl

Year of construction: 2013, condition: ready for operation (used), An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Lrodpfx Ajxd Avtokujl

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 105 mm Lsdpfjx Nr R Hsx Akusrl Clamping Unit Clamping force 6500 kN This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, General Data Machine weight 20000 kg Lrodpfx Asx Nr H Iekuel Measurements height 2230 mm Dimensions Machine Length 8840 mm Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 5500 kN This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2005, operating hours: 40,403 h, functionality: fully functional, Deckel Maho DMC 80H duo Block About the Machine: Extremely robust machine. Technical Specifications: - Control: Siemens 840D - Travel paths X, Y, Z axes: 800/800/800 mm - Travel path C axis: 360° - Clamping surface rotary table: 800 x 630 mm - Rapid traverse: 60 m/min - Spindle speed: 20 - 12000 rpm - Tool holder: SK50 - Tool magazine with 60 positions - Network connectivity - Automation interface available Equipment: - Internal coolant supply 50 bar with belt filter system - Work area rinsing system - Rinsing gun - Chip conveyor Inspection/Test under power at our facility is of course possible. We are pleased to offer transport, installation and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We support you! Ljdpfx Asyhwrcjkusrl From machine purchase, transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: excellent (used), Year of construction: 2007, operating hours: 32,947 h, functionality: fully functional, Deckel Maho DMC 100H duo Block About the machine: Very robust machine. The main spindle was renewed in 2023. Technical Data: - Control: Siemens 840D - Travel range X, Y, Z axis: 1000/1000/1000mm - C-axis travel range: 360° - Clamping surface rotary table: 800x800mm - Rapid traverse: 60 m/min - Spindle speed: 20-12,000 rpm - Tool holder: SK50 Lrjdpfx Asyhwqmekuel - Tool magazine with 60 slots - Network connectivity - Automation interface possible Equipment: - Through-spindle coolant 50 bar with belt filter system - Work area flushing - Rinse gun - Chip conveyor An inspection or test under power on site is of course possible. We are happy to offer you transportation, installation, and commissioning of the machine at your site. All from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and those of other renowned manufacturers. We support you! From purchasing your machine, through transport and installation, to commissioning and subsequent maintenance or repair work—you can count on us.

Condition: used, Year of construction: 2017, Overview The winder was manufactured in 2017 by the Spanish manufacturer movitec. It is in operation until the end of September 2023 and can be visited at any time.  Technical data  Max. 120 pallets/ h (with 10 wraps) Dimensions (LxWxH): 5240mm x 3825mm x 4184mm Weight: 2.000kg  Foil width: 500mm  Main frame made of steel  Rotating ring with unwinding device for prestretch film Motorized prestretch system Cutting and welding system Scope of delivery  Protective fence  Winder | Movitec | Saturn S6 | 2017 Compressor | Josval | EDS-900 | 2016 Ledpfx Akel Uyfkjuorl

Condition: used, Year of construction: 2003, Feed diameter 250 mm Workpiece diameter max. 140 mm Workpiece length max. 700 mm Main spindle power (40% duty cycle) 38 kW Main spindle speed max. 4,000 rpm Rapid traverse speed X / Z 30 / 40 m/min Tool carrier 3 x disc turret with up to 11 driven tools each, or end machining turret Lrsdpfx Ajydfpkokuel

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Lrjdpfex Up Utsx Akusl Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Ljdpfx Akox Up Rnouorl Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: good (used), mileage: 315,294 km, power: 309 kW (420.12 HP), first registration: 08/2010, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: steel-air, loading space length: 6,280 mm, loading space width: 2,400 mm, Year of construction: 2010, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, retarder, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Speed limiter - Retarder - Air suspension - Parabolic suspension - Sun visor - Toolbox Lodpfx Akswwtk Rouerl - Power take-off (PTO) = Notes = Volvo FM 420 8x4-4 Tridem, hub reduction, Euro 5 engine, Hiab 322-6 crane, remote control, 6 hydraulic extensions, manual gearbox, air conditioning, cruise control, Belgian registration. = Further Information = Front axle: Steering; Tire tread left: 30%; Tire tread right: 30%; Suspension: leaf spring Rear axle 1: Twin tires; Inner left tire tread: 80%; Outer left tire tread: 80%; Inner right tire tread: 80%; Outer right tire tread: 80%; Reduction: planetary axles (outer); Suspension: air suspension Rear axle 2: Twin tires; Inner left tire tread: 80%; Outer left tire tread: 80%; Inner right tire tread: 80%; Outer right tire tread: 80%; Reduction: planetary axles (outer); Suspension: air suspension Rear axle 3: Lift axle; Steering; Tire tread left: 60%; Tire tread right: 60%; Suspension: air suspension Crane: Hiab 322-6 HIDUO, year of manufacture 2010, mounted at the rear of the chassis Technical condition: good Visual condition: good

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001-549, TECHNICAL DETAILS Maximum film height: 500 mm Maximum roll diameter: 250 mm Core diameter: 76 mm MACHINE DETAILS (not available) Lredpfx Aoycp Tkjkuel EQUIPMENT (not available)

Condition: ready for operation (used), HGH 6040 DUO Sandblasting Cabinet Manufacturer: HGH Model: 60 40 DUO External dimensions: approx. 1300mm x 720mm x 1350mm (W x D x H) Working area: 590mm x 400mm x 250mm (W x D x H) | 590mm x 400mm x 250mm (W x D x H) Weight: approx. 120 kg You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Ledpsyba Aysfx Akusrl Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the article description are possible and remain reserved.

Condition: excellent (used), Year of construction: 2016, clamping force: 500 kN, Equipment: documentation/manual, Engel duo 1800/500 eco drive Clamping force: 500 t Screw diameter: 70 mm Injection volume: 1139 cm3 Injection pressure: 1735 bar Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Type: Horizontal Drive: Hydraulic CC300 controll Lrjdpfxsw Hbyls Akuel Hours: 38.000 Euromap 67 2 core pullers Ecodrive 2 pumps Quick clamp system

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Lsdpfx Akoqcuvwouorl Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Pfeiffer DUO 65 two-stage high-performance rotary vane pump Here we offer a Pfeiffer DUO 65 two-stage high-performance rotary vane pump. Pfeiffer DUO 65 two-stage high-performance rotary vane pump Two-stage high-performance rotary vane pump with suction capacity of up to 70 m3/h With 3-phase motor With temperature sensor (3TF) for optimal motor protection Integrated gas ballast and HV safety valve For all applications in the rough and fine vacuum range Duo 65, 3-ph motor, 3TF, 200-230 / 346-400V, 60 Hz Type: PK D46 642 A with ONF 35/65 oil mist separator, corrosive version,  Sits on the pump's exhaust nozzle and prevents air pollution from oil mist. Type: PK Z40 150 Scope of delivery: (See picture) Lodpfovx Tfxex Akusrl We are happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax

Condition: used, mileage: 454,000 km, power: 199 kW (270.56 HP), first registration: 05/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: mechanical, loading space length: 6,300 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2006, Equipment: ABS, air conditioning, crane, Renault Premium / 6x2 Platform 6,30 m + CRANE Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2006 ? MILAGE: 454 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS Ledpjydubiofx Akujrl ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION Platform: 630 x 240 x 60 cm (L x W x H) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 480/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: HIAB 122 B - 2 DUO TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) ?????: 0048 (Sebastian)

Condition: new, functionality: fully functional, overall weight: 7 kg, SAUER DUO S3 renovation milling machine, brand new Voltage: 230V / 50 Hz Lrodpfx Akoxp Supeuel Power: 1500 Watts RPM: 2200, head diameter 150 mm. A floor milling machine for: removing adhesives, removing paints, levelling concrete, etc. With proper dust extraction, the machine is suitable for asbestos remediation. We can offer the machine HM Splite with multiple milling heads HM Split. SAUER Trioschleifer DTS 850. Demonstration machine 230 Volts / 50 Hz 750 Watts, weight 2.6 kg. Speed: 1500 - 13,000 RPM. We can supply this machine with a wide range of accessories (see the pictures).

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Lrsdpfx Akjwyvg Tsuel Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO , Rexroth 1MS200E-4B-A1/S010 Motor + 1MR200E-A066 Rotor + SINS-085HW Cylinder from EMAG VSC 200 Dou,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ljdpfxjl Nqyds Akujrl

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO, Rexroth 1MR200E-A066 rotor + MS200E-4B-A1/S010 motor + S9124453 brake + SINS-085HW cylinder,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lrjdpol Nqyaefx Akuel

Condition: used, Year of construction: 2011, A well-preserved EMAG laser welding machine with EMAG ultrasonic testing system including Laser Rofin type: DC 060 built in 2009 Without exhaust unit The machine used to weld gears with coupling rings. Diameter 60-80 mm. Weld depth 4-6 mm. Lrjdpfx Asixxqkokuel *

Condition: used, Year of construction: 2001, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4.940 g/PS closing pressure: 9000 kN weight of the machine ca.: 19 t Out of serial production Ledpfjtuncvox Akuorl Machine and Robot condition regularly checked by EngelCare program Linear robot on machine was fully refurbished in 2021 *