Used Stahl Clamping Cube With T Slot for sale (76,580)

Condition: used, Year of construction: 2002, Roundpilefeeder RD.2-78 1 station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Dodpfx Adsud U D Iorocn Glueing device Rear -and front-mounted slitter shafts Gate-fold unit Available: at short term

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Very little used, new price EUR 200.000     Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Height: 450mm Djdpszw Eyzefx Adrscn Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m Dcjdpju Smq Ssfx Adron - Rema Scanner - log infeed conveyor

Condition: used, Year of construction: 1980, Falzmaschine - Folding Machine Stahl K56/4-KTLBaujahr / Year approx 1980 - Serial-No. 16760 Dcjdpfx Aslcfk Dedrjn Flachstapelanleger / Flat Pile Feeder Falztyp: 4 Taschen - Schwert - Seitentasche - Schwert Folding Type: 4 buckles - 1 knife - 1 side buckle - 1 knife Format / Size: min. 140 x 180mm - max. 560 x 9000mm Papiergrammatur / Paper weight: 40 – 250(g/m²) Stapelhöhe Anleger / Pile height: max. 80cm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1991, condition: good (used), machine/vehicle number: 44070/91-180102, 4 Pockets Dsdpfx Adeg I I N Ierjcn 1 Folding Knife

Condition: used, Year of construction: 1978, throat 1410 mm workpiece height max. 1150 mm stroke 1400 mm table diameter 1400 mm milling-head swivable +/- 10 ram - range of adjustment 750 mm pulling power 50000 N workpiece weight 10000 kg Ram stroke speed 30 m/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Dodpfxjyqvgte Adrecn than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), machine/vehicle number: 26041, Offer 26041 Technical data (approx.): - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm - Plate height without base frame approx.: 180 mm - Plate height with base frame approx.: 810 mm - Top plate thickness approx.: 115 mm - 11 T-slots in the table surface, length: 1500 mm - T-slot pitch in the table surface: 250 mm each - T-slot width approx.: 40 / 22 mm - T-slot depth approx.: 16 / 24 mm Djdpsyvrx Rjfx Adrjcn - Required space: L 3500 x W 2500 x H 1100 mm - Weight approx.: 4500 kg

Condition: used, Year of construction: 1988, machine/vehicle number: 36336, Falzmaschine - Flat Pile Folding Machine Stahl T52/4-4-SAK66Year 1988 - Serial-No. 36336-88-148120 Dcjdpfx Adjh Axgvjrjn Folding Size min. 100 x 150mm Folding Size max. 520 x 820mm Folding Type: 1. Unit 4 Buckles - folding width 500mm 2. Unit 4 Buckles - folding width 500mm Pile height max. 690mm Stream delivery SAK 66 Include Compressor Counter - Control PCS 100 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 88139, Falzmaschine - Flachstapelanleger - Folding machine - Flat Pile Feeder Stahl T 52.3/4-T-F-KBYear 1994 - Serial-No. 88139-246736 Flat pile feeder Dcedpeh Axqmofx Adren 1. Folding unit 4 buckles 2. Folding unit 1 knive Counter Anti noise hoods Stream Delivery Include compressor-pu Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Offer 26037 Technical data (approx.): Dcedpeycr Spefx Adron - Plate length approx.: 6000 mm - Plate width approx.: 1800 mm - Plate height without subframe approx.: 360 mm - Plate height with subframe approx.: 870 mm - Top plate thickness approx.: 75 mm - 6 pcs T-slots in the table surface, length: 6000 mm - Center distance of T-slots in table surface: 250 mm - Center distance of T-slots from outer edge: 125 mm - T-slot width approx.: mm - T-slot depth approx.: mm - Required floor space: L 6000 x W 1850 x H 870 mm - Weight approx.: 11000 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: ST 1005-8/2 1/1, Year of construction: 2021, lifting height: 8,000 mm, chain length: 9,000 mm, load capacity: 500 kg, lifting speed: 133 mm/s, fine lifting speed: 33 mm/s, type of input current: three-phase, The overhead crane is in like-new condition and has been used very little. The chain is well-maintained and greased. Manufactured and calculated by Ralf Brinkmann GmbH. Transport within Switzerland and export can be arranged; the buyer bears the costs. Technical data: Load capacity: max. 500 kg Runway type: IPE runway beam Runway length (fixed): 12,000 mm Runway length (movable): approx. 9,595 m of which 4,615 mm (extending from the building) System consisting of: 12.00 m IPE runway beam for attachment to the existing concrete ceiling (2 pieces of 6,000 mm each with connecting elements) - Mounting plate on top - 9.59 m IPE runway beam, for movement on the "ceiling rail". intended for attachment via the following travel units. Additionally, it has two counter-pressure rollers, at the rear. Eyelet for attaching the hand trolley to be able to retract the telescopic rail, at the rear end of the telescopic rail. 2x hand travel unit for manual movement of the telescopic rail 4x set of end stops (stoppers) designed as bolted angles 2x C-rail system / cable management system for supplying power to the electric chain hoist / electric travel unit (no ideal control!) 1x hand trolley, for retracting the telescopic rail. 1x STAHL Crane Systems electric chain hoist ST 1005-8/2 1/1 Manufactured according to the rules of the EC Machine Directive, Device Safety Act, and BGV. Lifting mechanism operating mode according to DIN EN 13001-2: HD1 Motor classification (FEM/ISO): M4 Load-bearing component classification (FEM/ISO): M5 Protection type EN 60529: IP55 Designed for operation in an indoor environment, ambient temperature -20 to +40°C Lifting mechanism load capacity 500 kg Lifting height 8.00 m Lifting speed 2.00 / 8.00 m/min Power (nominal) 0.20 / 0.80 kW Design data, see product information / motor data sheet Duty cycle 20 / 40 % Load chain galvanized Travel unit electric travel unit, short overall height Travel speed 5.0 / 20.0 m/min Power 0.07 / 0.32 kW Duty cycle 20 / 40 % Flange width 200 mm Electrical system Contactor control Operating voltage 400 V Control voltage 48 V System frequency 50 Hz Control unit STH incl. 6.80 m control cable Paint finish Hoist - Topcoat polyurethane 80 µm Topcoat lifting mechanism in RAL 7021 color, black gray Topcoat control box and fan cover in color Dodpfxjzn H Two Adrocn RAL 6018, yellow-green Note: Overload protection and emergency lowering by slip clutch (must not be operated under normal conditions) Equipment - Travel switch on both sides - Lifting end switch for upper hook position - Guide for cable-mounted power supply, 505 mm - Radio remote control with emergency control unit STH (transmitter Quadrix, receiver FSE308 with integrated horn (91 dB) and signal light, charger, replacement battery, belt clip, adhesive symbols) Documentation: - Installation declaration according to Directive 2006/42/EC for machinery - Test book - Load capacity labeling according to UVV standards - Operating manual for cranes Currently, the crane is disassembled and stored in a hall in Switzerland, near the German border.

Condition: good (used), Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: Mounting plate with T-slots, for hydraulic press, eccentric press... Dcjdpfxoyx Atwe Adren -Clamping surface: 605 x 450 mm -Inner diameter: 180 mm -Plate height: 97 mm -Groove width: 18 mm -Dimensions: see drawing in the photos -Dimensions: 605/450/H97 mm -Weight: 183 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: ILL, Carl Stahl Rotomax load turning device Load turner Payload capacity: 1 to 1000 kg Connection: 400V, 16A Item location: 75053 Gondelsheim Djdpfexwd Iqex Adrscn Very good condition, see pictures Shipping via freight forwarder or collection by appointment

Condition: good (used), Offer 25348 Technical Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of top plate approx. 80 mm Dodpfxoxu Evwo Adrocn - 8 pcs. T-slots in table surface, length 5500 mm - Center distance between T-slots in table surface: 255 mm each - Center distance of T-slots from outer edge: 110 mm - T-slot width approx. 40 / 60 mm - T-slot depth approx. 62 mm - Required space: L 5600 x W 2020 x H 350 mm - Weight approx. 10,200 kg

Year of construction: 2006, condition: excellent (used), machine/vehicle number: MBUT133-767, Steel single girder suspension crane Bridge crane Crane runway Indoor crane Gantry crane width approx. 8,3m - length approx. 11m, payload 500KG Track width can be changed, end beams (125cm) are bolted with 8 bolts. incl. approx. 2x 11m running rails IPE 300 (were cut in the middle) Dodpfx Adsty Sx Rjrscn incl. conductor rail for the power supply by means of the crane track's current grinder The width of the trolleys can also be adjusted to a different girder dimension. Incl. complete control system, floor operation by means of control bottle The crane can be moved electrically in all 3 axes Lifting height/hook path approx. 4m Connection to 400V 16A, year of construction approx. 2006 Very good condition, equipment was only used for maintenance - hardly used Shipping by forwarding agent, collection preferred Location 75053 Gondelsheim Please ask for shipping prices by postal code, we will send you an immediate and non-binding offer!

Condition: good (used), Offer 26038 Technical data approx.: - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm - Plate height without base frame approx.: 350 mm - Plate height with base frame approx.: 870 mm - Top plate thickness approx.: 75 mm - 9 T-slots in table surface, length: 3000 mm - Center distance of T-slots in table surface each: 250 mm - Center distance of T-slots from outside edge: 125 mm - T-slot width approx.: mm - T-slot depth approx.: mm - Required space: L 3000 x W 2500 x H 870 mm - Weight approx.: 8000 kg Dcjdpjyc T Dtofx Adron

Condition: excellent (used), Year of construction: 2005, Heidelberg Stahl ST100.2 year 2005 standard equipment 6 stations hand feeding station, right cover feeder transfer element to stitching machine ST100 Dedpfx Adei Dtlterocn Hohner stitching heads Trimmer TR100 long delivery conveyor loated in print shop in production available shortly

Condition: good (used), Offer 25435 Technical Data: - Plate length approx. 3500 mm - Plate width approx. 1750 mm - Plate height approx. 350 mm - Rectangular tubes bolted on left and right, each 200 mm - Top plate thickness approx. 80 mm - 6 T-slots in the table surface, length 3500 mm - Center distance of T-slots on the table surface: 250 mm each - Center distance of T-slots from outer edge: 125 mm - T-slot width approx. 35 / 60 mm - T-slot depth approx. 60 mm - Space requirement: L 3500 x W 2100 x H 350 mm - Weight approx. 4200 kg Dedpfx Adsx Dmfrerscn

Year of construction: 1982, condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate -T-slot plate: for milling machines -Width: 500 mm -Length: 500 mm -Height: 87 mm -Plate: is solid -Groove width: 12 mm -Dimensions: see photo technical drawing -Quantity: 21x mounting plates available Price: per piece Dodpjhubczefx Adrscn -Dimensions: 500/500/H87 mm -Weight: 91 kg/piece

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm Dedpfjxhgfmjx Adrjcn T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Weight: 7000kg

Condition: excellent (used), Year of construction: 2004, For Sale Electric Chain Hoist - 12T. -2.8m/s. -Carl Stahl. -Link ∅ 16. -Motor 5.5kW 400V. Djdpfxjv Unuae Adrecn -2004

Year of construction: 2012, condition: like new (used), machine/vehicle number: W111, Steel crane track suspension crane circular track 3x250Kg chain hoist crane Ideal for car washes, electroplating, etc Circle dimensions 6x2.3m (curved HEB140 beams) + Power rails / power supply Dcsdpfx Adei Ammyoron + 2x 12m substructure HEA 180 + wall brackets + 3x 250Kg chain hoists - electrically movable - trolley travel and lift (approx. 4m) Each chain hoist can be controlled independently of one another Crane is dismantled, packed and immediately available New condition Collection by appointment in 75053 Gondelsheim Forklift is available for loading Shipping by forwarding agency possible, please inquire with zip code

Condition: used, Year of construction: 2018, Lifting height 5200 mm Rail width 9510 mm Dcedpfx Adju R R Ixersn

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, overall weight: 8,000 kg, total length: 16,300 mm, load capacity: 12,500 kg, Manufacturer: STAHL Crane Komép bau " Completely renovated in 2011" Span: 16.3m Lifting height: 10m Load capacity: 12.5t Dcedpfx Adjxtmhlerjn Modernized, wired remote control system, new STAHL 12.5t trolley

Condition: good (used), Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Top thread: M12 -Groove: 13 x 134 mm -Dimensions: 220/330/H280 mm Dsdpfxjd Nnhco Adrocn -Weight: 28 kg