Used Steup Steup Bridge Saw for sale (6,284)

Condition: used, Longitudinal circular saw Longitudinal panel saw Ncodpfx Asq E Ivtokyjr Cross-cut / longitudinal circular saw, year 1999 operates from below for lengths up to 4.7 m material thickness up to 110 mm also suitable as a travelling saw behind a production line INFO!! For such a new Flender circular saw flat motor 10 kW, you pay 4,700 EUR which is more than you pay for the entire machine at company jöma.

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: – Diameter of guide wheels: Ø 600 mm – Cutting height: max. 360 mm – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm Ncsdpfoy El U Djx Akysr – Maximum blade/bandsaw width: 35 mm – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm – Weight: ~300 kg

Condition: good (used), Year of construction: 1987, Veneer saw with planer unit, connectable with reversible knife planer head. Max. cutting length 3005 mm. With rear finger stop and scale. Nsdpfx Aksw U D U Hjyocr

Condition: good (used), Year of construction: 2020, Still in very good condition multi-blade saw with 1 movable saw blade. 22 kW motor. Nedpfexyirtox Akyocr

Condition: good (used), Year of construction: 2008, functionality: fully functional, power: 18 kW (24.47 HP), Still a very presentable longitudinal saw with a powerful 18.5 kW saw motor max. cutting length: 6.2 m max. cutting width: 0.45 m max. cutting height: 0.17 m with hold-down device with digital size display Njdpsy D Drxefx Akyjcr Ready for demonstration in the workshop.

Condition: good (used), Year of construction: 2003, saw blade diameter: 450 mm, Nice under-table crosscut saw with two-hand operation and foot switch. Saw blade diameter 450 mm, max. cutting height 16 cm, with 2 roller conveyors. Nsdpfx Akowx R Ivjyjcr

Condition: like new (used), Year of construction: 1993, functionality: fully functional, operating hours: 1,100 h, Still a very nice rip saw with only 1100 operating hours, almost like new. Make: Irion, Type: HFS 170, built in 1993. Max. cutting length: 6200 mm. Max. cutting width: 600 mm. Max. cutting height: 170 mm. With digital width display. With laser. Ncsdpfov T Rc Djx Akyer

Condition: good (used), Year of construction: 1962, large band saw with 1250 mm roller diameter with center cutting device Ncedsfnh T Ijpfx Akyor 45 kw motor roller width 120 mm with electr. saw blade tensioning the upper wheel has been removed for transport very good condition because little run was overhauled in 1997

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Njdpfx Aksq Rb Irjyecr cutting length 3100 mm with rear fence

Condition: good (used), Year of construction: 1979, Veneer saw with planing unit Max. cutting length 3100 mm Functionally tested Njdpfx Aowimduekyscr

Condition: good (used), Year of construction: 2000, Sizing saw with scoring unit 3 m sliding carriage Digital displays Width adjustment is no longer motorized Height adjustment converted to foot hydraulics Clamping beam not included in the price Nsdpfotw Hd Aox Akyscr

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers Ncjdpfx Aotxirfekyor for 3 m sliding carriage

Condition: good (used), Year of construction: 1995, Longitudinal circular saw, Swiss manufacturer, with max. 5.1 m cutting length Ncodpfx Aewugihokyjr with lamella carrier max. cutting width 450 mm max. cutting height 160 mm hydraulic feed motor

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm Ncjdpfxoxiu Dte Akyer max. cutting height 170 mm motor 11 kW

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head Ncsdsn An A Tspfx Akyor cutting length 3050 mm with rear support and fence

Condition: good (used), Year of construction: 2001, Veneer saw with planing unit Nsdpsivg Dzjfx Akyjcr cutting length 3500 mm with rear depth stop, adjustable by hand wheel no electr. feed

Condition: excellent (used), functionality: fully functional, AUTOMATIC MULTI RIP SAW model SCM M3 second hand machine carpet with integral cast iron elements in excellent condition. general condition of the machine: excellent Technical details : max.height of cut mm.120 max.working width mm.300 minimum length of cut mm.250 max.diameter of blades mm.350 min.diameter of blades mm.200 Ncodpfx Aey Ev Izekyer main motor power Hp 35 feed motor power Hp 1,5 arbor speed rpm 4200 variable carpet advancement speed. from 6 to 45 m/min. net weight kgs.2200 volt. 380/50

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction Unit MG 3 ST Circular Saw Fully Automatic PROFILMA 502 1 69,430.00 69,430.00 Fully automatic operation, drive 7.5 kW, S6, 400 V, 50 Hz, 2850 RPM. For use with saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm, Siemens S7 control system with touch display including piece counter. Including CPU 315 and Flexisoft, piece count multiplier for bundle cutting operations. Cycle time indicated in seconds, chain dimension, including reversing device for section lengths up to 4 m max. Automatic shut-off via limit switch at end of workpiece, error diagnostics, including IXON router for VPN connection, see datasheet. Motorized saw blade feed, continuously adjustable, vertical and horizontal clamping from below upwards, feed and discharge side at the saw head, cutting gap expansion on both sides of the saw blade. Electronic material feed unit, 800 mm feed length, with ball screw and servomotor, including pneumatic horizontal and vertical clamping device. The profile support area in the feed section is equipped with a liftable/lowerable roller, remnant piece from 75 mm, depending on profile. Clamping pressure reduction horizontal and vertical with 6 pressure regulators, timed spray device with fill level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame internally lined with sound insulation mats. 2 extraction ports Ø 100 mm, safety guard above the saw head and feed unit, 740 mm roller conveyor with reach-in protection on the infeed side, 450 mm Pertinax table plate with reach-in protection on the discharge side. Nedpey Dtpmjfx Akyocr Chip Extraction Unit MG 3 Dust and chips are collected in a 172-liter metal container, which is detachable for easy emptying. 2 outlets with 100 mm hose adapters, without extraction hose, drive 3.0 kW, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M, maximum noise level 80 dB(A). Selector switch for continuous operation or operation controlled by the saw, without power cable, paint finish: RAL 7035 / 9016.

Condition: used, Year of construction: 2011, 1 unit overhead crane STOCKER 1.2/2x05 Ncjdpey D Nc Aofx Akysr Load capacity: 2x 250 kg, length approx. 6 m, crane has already been dismantled, placed on a pallet Colour: as shown, according to photos and inspection Year of manufacture: 2011 Condition: used Storage location: outdoor area Payment method: advance payment by bank transfer Shipping: collection only from location in Ditzingen-Heimerdingen

Condition: used, Year of construction: 2007, 1 unit KALTENBACH TL450 mitre saw with 2 roller conveyors, each approx. 200x47x120 cm. Colour: as shown, according to pictures and inspection. Year of manufacture: 2007. Condition: used. Storage location: warehouse hall. Payment method: advance payment via bank transfer. Ncjdpsy D Nciefx Akyer Shipping: collection in person only from location Ditzingen-Heimerdingen.

Condition: used, 1 piece of mitre saw EISELE VMSA-LO Voltage: 380 Volt, on pallet Colour: as depicted, according to images and inspection Ncsdpfxoy D Nbxj Akyor Condition: used Warehouse location: storage hall Payment method: advance payment by bank transfer Shipping: collection only from location Ditzingen-Heimerdingen

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST D2 002, saw blade diameter: 250 mm, overall weight: 2,850 kg, cutting width (max.): 450 mm, Two-spindle multi-saw wood cutting machine JL32 Good working condition Ncsdpfxoy E Snqo Akysr Max. 10 circular saw blades on the spindle, diameter 250mm x 70mm Main spindle dimensions: diameter 70mm, length 420mm Feed rate (cutting): 5-25 m/min Machine dimensions: length 2200mm, width 1500mm, height 1900mm Machine weight: 2850kg Voltage: 380V Main motor power: 30kW and 22kW (2950 min-1) Feed motor power: 0.75kW and 0.75kW (900 min-1)

Condition: good (used), Year of construction: 2011, functionality: limited functionality, power: 1.93 kW (2.62 HP), input voltage: 400 V, cutting height (max.): 250 mm, overall weight: 370 kg, Equipment: CE marking, Brand: MEP Model: Shark 281 Year of manufacture: 2011 Serial number: 041593 Power (kW): 1.93 Ncedpoy A Ir Tefx Akysr Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1600 x 800 x 2050 (excluding conveyors) Weight (kg) approx.: 370 (excluding conveyors) Stock quantity: 1 Manufactured in: Italy Cutting capacity (mm): 250 round / 230 square / 280 x 200 rectangular Comments: Fair used machine, ready to use.

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: 3229, type of input current: three-phase, rotational speed (min.): 35 rpm, rotational speed (max.): 70 rpm, input voltage: 500 V, For sale is a robust metal circular saw from the manufacturer Eisele, model VMS III. This machine is a classic cold circular saw designed for industrial use and stands out due to its solid construction and durability. Ideal for workshops, metal fabrication, or locksmith operations. Ncodpfxey Dc I Ss Akyor Technical data: • Manufacturer: Eisele • Type: VMS III • Year of manufacture: 1971 • Machine number: 3229 • Rotational speeds: 35 / 70 rpm • Voltage: 500 V • Motor power: approx. 1.8 to 2.6 kW • Frequency: 50 Hz • Version: Three-phase current • Equipped with a vise and mechanical feed Condition: Used condition, appropriate for its age. The machine is of heavy-duty construction and well-suited for refurbishment or immediate use. Visually with signs of wear.

Condition: used, 21-12- Wood bandsaw NP HANSENS (used) Nsdpfxstq Tnxe Akyocr Motor power 3,7 kW Wheels diameter 800 mm Max cutting height 320 mm Dust exhausting hood Ø100 mm Table dimensions 750 x 630 mm Made in Denmark Transport dimensions 2400x800x1700 mm Weight 690 kg Price 1150 Eur (EXW Jonava, Lithuania)