Used Systemtechnik Hölzer Gmbh Schmauchabsaugung / Absaugung for sale (69,644)

Year of construction: 2025, condition: new, functionality: fully functional, We are offering this new LOWA GmbH Filling and Capping Systems capping machine, model WK12-17, bottle filling and capping machine, year of manufacture 2025. Manufacturer: LOWA GmbH Filling and Capping Systems Model: Capping Machine WK12-17 Machine type: Bottle Filling and Capping Machine Year of manufacture: 2025 Condition: new Category ID: 679 Iaodjyybh Ajpfx Apcjr If you have any questions or need more information, feel free to send us a message or call us.

Condition: excellent (used), Used stainless steel tank Article number: 10896 Previous application: CIP (Cleaning-In-Place) Volume: 3300 L Type: Vertical, standing on 3 legs Material (in contact with product): Stainless steel V2A / AISI 304 Bottom: Klöpper head Max. operating pressure: Atmospheric Tank dimensions: Internal diameter: 1190 mm External diameter: 1200 mm Overall height: 3450 mm Ijdpoyw Rn Hsfx Apcjar Cylindrical height: 3000 mm Overall width: 1250 mm Materials: Interior: 1.4301 / AISI 304 Exterior parts: 1.4301 / AISI 304 Features: Nameplate: no Leg height: 420 mm Outlet diameter: 37 mm / 37 mm Clearance outlet to floor: 160 mm / 500 mm

Condition: used, functionality: fully functional, A used Holdefleiss bottle filling and capping machine, type 12/3. The machine has been set up for 0.5l Euro and 0.33l long-neck bottles, including HDE. The machine is supplied without a pre-evacuation system and features long-tube filling valves. The filling valves will be newly resealed. Both a leakage test and a pressure test will be performed. Iasdpfoyycudex Apcor

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Iajdpoyt Ihbjfx Apcsr System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: new, -􀂾automatic screw feed -􀂾automatic switchoff for hopper movement via trail regulation - automatic depth disconnection - pneumatic drive and control - pneumatic screw ejection and emergency stop - foot control - protection-frame (safety device) Iasdoy Aiaxjpfx Apcjr

Condition: used, Year of construction: 2018, Overview These fermenters (iso tank) were manufactured in 2018 by Germany BrauKon GmbH. The equipment consists of 3 fermenters, designed for beer fermentation. The tanks are still installed and connected to energy and are available immediately. The equipment can be visited in production on request. Technical data  Capacity: 10 hl each Application: Beer fermentation Configuration: 3 × iso fermenters   Iaodpfx Apeywn Svscer

Condition: used, functionality: unexamined, Year of construction: 2018, Plant for endogas generation Year of manufacture: 2018 Net price (new): €103,500.00 Manufacturer: Hammer GmbH Model: Larus ENDOGEN-40-1.05-E incl. dew point control or cp control fully automatic power control in the range of 50–100% Iasdpfx Aox An Rmjpcer soot filter in duplex version

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Example: Travel path across = 600 mm Iasdou Hiq Rjpfx Apcer Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 13,500 kg, rotor diameter: 470 mm, control cabinet length: 2,800 mm, control cabinet width: 600 mm, control cabinet height: 2,100 mm, rotor length: 2,000 mm, power: 220 kW (299.12 HP), rotational speed (max.): 80 rpm, filling opening width: 1,650 mm, filling opening length: 2,060 mm, sieve perforation: 50 mm, input voltage: 400 V, The most powerful model: Micromat 2000 V2 Drive motor: 2 x 110 kW, 400 V/50 Hz Control cabinet: complete with frequency converter Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 104 pcs. New Rotor knife shape: 43x43x19.5 mm Feed opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Counter knives: yes Hydraulic unit: complete Hydraulic cylinder for screen cassette: screens 50x50 mm Total weight approx. 13.5 t Iasdpfx Aoyxxk Sepcjr Dimensions LxWxH mm: approx. 6500 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediate

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Iedpfsyxc Twjx Apcsar

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2027 - 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY ==> Info for manufacturing companies and dealers with their own production: Optionally, the drawings, rights, spare parts, customer and prospect data, as well as planning and production documents (including designs for a 9-ton pulling force version) for the broaching machine can be acquired from us. Please contact us if you are interested. ==> Our new machines are custom-built to order. Short-term production and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine designed for long-term use. Broaching tools (including special needles for internal gear cutting, etc.) and accessories available on request. Please inquire separately. All broaching tools and holders from other manufacturers can also be used with our broaching machine! Complete production and assembly at our plant in Germany. Additionally, we offer spare parts (spindles, spindle nuts, motors, gears, and all other necessary components – including electrical parts) for Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2027 – NEW MACHINE: The main application is the production of keyways from 3-28 mm (and larger), as well as profiles of similar dimensions. With its compact design requiring very little space, this machine can be successfully used in small, medium, and large businesses. Its low price makes it worthwhile even for small batch and one-off production. The drive is provided by a pole-changing gear brake motor. The maintenance-free double spindle drive ensures smooth operation, a central pulling point, and consistent cutting performance. The open worktable allows for unrestricted placement of even large workpieces. In most cases, the workpieces do not need to be clamped firmly during broaching. Stroke adjustment is achieved through adjustable limit switches. For short hubs/workpieces, multiple parts can be stacked for processing. Broaching needles, arbors, and spare parts available on request. Technical Data: - Pulling force: 60 kN at 3 m/min; 40 kN at 6 m/min - Broaching speed: 3 m/min and 6 m/min (Optional: stepless speed adjustment from 0 to 6 m/min with advanced electronics) - Return speed: 6 m/min - Stroke: 1050 mm - Broaching tool length: 1200 mm - Workpiece diameter: unlimited - Worktable: 450 x 350 mm - Table opening: 140 mm - Weight: approx. 510 kg - Footprint: 750 x 570 mm - Overall machine height: 1510 mm - Drive power: 3.7 / 4.4 kW - Electrical system: 400 / 230 Volt 50 Hz - Control voltage: 230 Volt - Operating voltage: 400 Volt 50 Hz Isdpfx Apjuqbnhocoar - Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 - Safety door: standard feature - Coolant system: standard feature The machine conforms to the latest Machinery Directive and bears the CE marking.

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also Ijdpjwf Rg Sjfx Apcoar offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V Isdpfx Aewf Rgrepcjar --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC Iasdpfjwf Rg Eex Apcjr --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A Iedpfxowf Rgxo Apcjar --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Year of construction: 2026, condition: new, Offered is an attachment block broom Kehrfix in different versions from 1.50 m to 4.00 m width. A pick-up must then still be discussed separately if this is desired (e.g. pallet fork pick-up, shovel hook or Euro pick-up). An attachment block broom for forklifts, wheel loaders, tractors, mini-loaders, mini-dumpers and many other vehicles and equipment! With various attachments for quick mounting on a variety of vehicles, the KehrFix is the perfect aid for keeping larger areas clean. Isdpfx Apeh T A Tnscjar The KehrFix push brooms are a professional choice for easy and effective sweeping and cleaning. The rugged KehrFix is designed to get the job done quickly and thoroughly in every conceivable application. KehrFix push brooms are high-quality, durable, maintenance-free and universally applicable sweeping systems.

Condition: used, functionality: fully functional, machine/vehicle number: 01/126/ANSP, overall weight: 120 kg, water consumption per time unit: 140 l/min, inner diameter: 800 mm, inner dimension height: 500 mm, input voltage: 400 V, input frequency: 50 Hz, reception height: 500 mm, input current: 16 A, temperature: 65 °C, heating capacity: 4 kW (5.44 HP), power: 6 kW (8.16 HP), load capacity: 150 kg, Industrial Parts Washer GEORG RENDER W 80 in used, fully operational condition. This machine is ideally suited for cleaning metal parts, components, and assemblies in industrial manufacturing and maintenance. The unit features a sturdy washing chamber with an internal diameter of approximately 800 mm and a usable internal height of around 500 mm, enabling efficient and uniform cleaning even of complex workpieces. The machine operates with an electrical connected load of approximately 6 kW and is designed for use with 400 V three-phase current. The integrated heater (approx. 4 kW) enables cleaning temperatures up to about 65°C, ensuring effective removal of oils, greases, and contaminants. Water consumption is approximately 140 l/min. The maximum load capacity is about 150 kg. The machine weight is approximately 120 kg. The system is robustly built, maintenance-friendly, and ready for immediate use. Ideal for workshops, production facilities, and industrial applications. Viewing under power possible by appointment. Iedpfoyw R Itox Apcsar

Year of construction: 2004, condition: excellent (used), Drive power: 250 kW Rotor length: 1600 mm Rotor diameter: 1200 mm Infeed opening: 1500 x 750 mm / 1500 x 600 mm Many wear parts replaced with new, main motor with new bearings. Undercarriage, hydraulic unit, Including control cabinet and operator panel, Excellent condition, ready for operation Iedpfeuqyr Eex Apcear Total weight approx. 18 t

Condition: used, functionality: fully functional, Fully automatic bagging system – completely dismantled and ready for collection For sale is a fully automatic bagging system, suitable for a wide range of bulk materials such as flour, pellets, and granulates. The system impresses with its high degree of automation and robust industrial design. Features and components: - Pneumatic bagging unit Iedeyw Rffjpfx Apcoar - Fully automatic sewing machine for sealing the bags - Rollers for flattening filled bags - Roller conveyors for in-plant transport - Robotic arm for automatic palletizing of the bags - Automatic pallet magazine - All electrical cables and control cabinets have been professionally dismantled The entire system has already been dismantled, neatly stored on pallets, and is ready for immediate collection. Comprehensive electrical documentation with schematics is available. Special features: Ideal for industrial applications with high throughput and automated processes. All components are perfectly coordinated, ensuring an efficient packaging and palletizing process. If interested or for further information, we are happy to assist you.

Condition: good (used), functionality: fully functional, maximum load weight: 2,700 kg, permissible axle load (axle 1): 1,350 kg, permissible axle load (axle 2): 1,350 kg, trailer brake: trailer braked, Dimensions: approx. 420 x 180 x 220 cm Overall length: 570 cm The trailer is immediately ready for use and runs smoothly and reliably. Technical specifications: • Manufacturer: Böckmann Fahrzeugwerke GmbH • Model: CHF 613/20 Iajdpfx Ajyvy Aqspcjr • Gross weight: 2,700 kg • Axles: 2 × 1,350 kg (tandem axle) • Braking system: overrun brake (Knott KFZ 27) • Plug: 13-pin • Jockey wheel: present, fully functional Features & Highlights: • Sturdy tarpaulin body – weatherproof, good condition • Extremely robust Böckmann heavy-duty construction • Tandem axle = smooth and safe ride • Numerous lashing points • Ready for immediate use Condition: The trailer is used but technically reliable. Tarpaulin is clean and tight, electrics fully functional, chassis solid. Normal signs of use on metal parts (see photos).

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Iasdpfxoyabxyo Apcsr Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: used, functionality: fully functional, Stainless Steel Foam Sprayer V2A, 24L usable volume with 3m compressed air hose Iodpfx Apsyvz D Aocjar - Cleaning and derusting of large surfaces with durable foam - Spray efficiency of 7.3 m² per minute - Operates with up to 8 bar compressed air Quality Seal Systems Corrosion-resistant stainless steel Tank material: V2A stainless steel Compressed air connection: up to max. 8 bar Pump: max. 8 bar Delivery rate: 90 - 200 ml per minute Sale exclusively to business customers, commercial traders, self-employed professionals, and public institutions—consumer purchases excluded. The unit is pre-owned and sold as-is, with any liability for material defects excluded. The sale is made under exclusion of warranty, guarantee, return, and exchange. Claims for damages due to intentional or fraudulently concealed defects, injury to life, body, or health, and in cases of gross negligence or intentional misconduct are excepted.

Year of construction: 2022, condition: good (used), functionality: fully functional, Equipment: ✔ Plastic spray nozzles ✔ Level protection with probe ✔ Programmable heating ✔ 5 bar pressure pump ✔ Oscillating spray pipes ✔ Fan ✔ Lift-up door ✔ Trolley with oil drip tray Useful volume: 1170 x 600 mm Max. load: approx. 750 kg Tank volume: max. 610 litres Power consumption: 25 kW – 40 A Cleaning pressure: 5.1 bar Pump capacity: 24 m³/h Sale exclusively to businesses, commercial traders, freelancers, and public institutions. Consumer goods purchase is excluded. The device is used and sold without any liability for material defects. Ijdsyvzzbjpfx Apcoar Warranty, guarantee, returns, and exchanges are excluded from this sale. Exceptions apply to claims based on intentional or fraudulently concealed defects, as well as claims for damages relating to injury to life, body, or health, and in cases of gross negligence or intent.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools Ijdpfx Apoif Ek Recjar • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) Iajdpofnlkwefx Apcer The machine is CE certified.