Used Tornos Delta 20/5 Iii for sale (77,054)

Condition: used, mileage: 19,700 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, first registration: 11/2003, next inspection (TÜV): 01/2027, emission class: euro3, color: beige, number of seats: 5, Equipment: ABS, all wheel drive, central locking, immobilizer system, parking heater, First owner. Only 19,700 total kilometers driven since new. Comes with service booklet. Last service in 2025 at 17,983 kilometers. Engine, transmission, and rear axle oil changed. Timing belt replaced. Ijdpjyyfr Sefx An Hjif Tires also replaced at the same time; fitted with Semperit winter tires, DOT 2023/2024. Manufactured in February 2003 and first registered in November 2003. One of the last T4 Syncro models built. Long wheelbase. Originally, it was technically intended for factory installation to be registered as a standard passenger vehicle with 9 seats. However, this registration was immediately removed from the original vehicle registration document because the vehicle was always used as an operational vehicle. The actual registration type has always been "Other motor vehicle, water rescue operational vehicle." Currently, 5 seats are registered and actually present; all are robust and easy-to-clean synthetic leather seats. SORTIMO shelving is installed in the rear, which has been used for emergency equipment and clothing. Unladen weight according to documents: 2270 kg. Permissible total weight: 2890 kg. Overall dimensions of this VW T4: Length 5107 mm / Width 1840 mm / Height with special signals 2100 mm (without the flashing lights, it is 1920 mm). Sliding door on the right and rear wing doors. Dent on the lower left rear. All doors function smoothly and without noise. WEBASTO AirTop 3500D auxiliary heater. Ball hitch with 2000 kg towing capacity (braked) or 750 kg (unbraked). Maximum towing weight = 4500 kg. 2.5-liter TDI five-cylinder diesel engine. 2461 ccm. 102 hp. AXL. Starts immediately and runs perfectly. 5-speed manual transmission. Differential lock. ABS. Power steering. Airbags for driver and passenger. Central locking with remote control. 2 original VW keys with remote control are included. Electric windows and electrically adjustable exterior mirrors. 155 km/h is listed as the maximum speed. The T4 was recently driven to us without any problems over 600 kilometers on the highway. It runs excellently and is in good original condition. The TÜV (technical inspection) is valid until 01/2027. This offer is only valid for commercial businesses and freelancers of all kinds, as well as for authorities / emergency services. Unfortunately, sales to private end consumers are not possible. Subject to prior sale and errors. Price according to §25a UStG (differential taxation; VAT cannot be shown separately and is not added). The Syncro is available immediately.

Condition: used, empty load weight: 5,240 kg, maximum load weight: 35,760 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 09/2018, suspension: air, tire size: 385/55 22,5, wheelbase: 1,310 mm, color: black, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41638 Krone, SDC 27 Highcube * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air connection, coupling head (red + yellow) * Connection plug, 2x7-pin * Connection plug, 15-pin * Lifting and lowering device * Suspension: Air * Gross vehicle weight: 41,000 kg * Tare weight: 5,240 kg * Payload: 35,760 kg * Permissible gross vehicle weight: 41,000 kg * Axle manufacturer: Krone * Tire condition, 1st axle: -- - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: -- - Tire size: 385/55 R22.5 * Tire condition, 3rd axle: -- - Tire size: 385/55 R22.5 * Wheelbase: 1310 mm * Tire size: 385/55 R22.5 * Krone SDC 27 eLTU5-2 * Height-adjustable locking mechanism * High Cube Container * Additional release valve for releasing the brake * Container capacity: 1 x 40' container with tunnel, 1 x 45' container with tunnel * 2 x 20' containers * 1 x 20' container, flush at the rear * 1 x 20' container, centered Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates Iedpfxjzt Htne An Hjif * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, empty load weight: 5,190 kg, maximum load weight: 35,810 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 02/2020, suspension: air, tire size: 385/55 22,5, wheelbase: 1,310 mm, color: black, Year of construction: 2020, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service Isdpfx Ajzt Hr Rjn Hjif * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 1,500 kg, Bale clamp Iiedpfx Ansyzvl Es Hof Condition: Ready for use and fully operational Technical condition: good Description: Year 2018 Capacity 1500 kg Sideshift Opening range 650-2020 mm Width 1320 mm Clamps 1000 mm For Linde mast 386 /391 standard ID OS1944

Condition: used, load capacity: 3,500 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 3A (51 cm) Capacity 3500 kg Opening range 250-1300 mm Width 950 mm 1x pad 900x250 2 x pad 900x250 360° ID OS1296 Iiodpfx Anet Ulr Es Hof

Condition: used, Year of construction: 2005, load capacity: 2,000 kg, construction height: 410 mm, Telescopic forks ISO class: ISO class 2 = 1,000 - 2,500 kg Technical condition: very good Description: ISO 2A (41 cm) Capacity 2000 kg Min. 800 mm, max. 1250 mm Width 140 mm Thickness 60 mm Year 2005 Very good condition ID OS439 Iedpfst S Rt Aex An Hjif

Condition: used, Year of construction: 2012, Packaging system: automatic bag feeding, label printing, bagging, folding, sealing and sorting into storage magazines, processing: round single-vision lenses with 60mm-80mm diameter, max. positive power: +14D, min. negative power: -12D, max. cylinder: 4D, prism: 5cm/m, max. prism value at the measurement point: 10cm/m, diameter measurement accuracy: 0.25mm, sphere/cylinder measurement accuracy: 0.02D for measured values up to 6D, 0.03D for measured values up to 14D, prism measurement accuracy: 0.02cm/m + 1%, center thickness measurement accuracy: 0.04mm, output: approx. 800-900 lenses/h, measuring system: FOCOVISION, rotary table: 6 positions. Machine weight: 1450kg, documentation available. Inspection possible by arrangement. Iedpfx Anjzun Tfe Heif

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Iisdpfszun T Eox An Hef

Condition: good (used), Year of construction: 2012, functionality: fully functional, Aerzen Delta Hybrid D75L Rotary Lobe Compressor Iiodpfxeyxnwho An Hsf

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: automatic, number of seats: 1, total length: 7,336 mm, total width: 2,001 mm, Year of construction: 2025, Equipment: air conditioning, central locking, had accident, parking heater, soot filter, Sprinter 519 4x4 with M3 Preparation Optional partition wall and choice of single or double passenger seat can be supplied upon request. 4 identical vehicles available Special equipment includes: - Active Distance Assist DISTRONIC - Exterior mirrors without integrated indicator - Front side indicator lamps - Omission of load compartment/sliding door - Tachograph controls located front under headliner - No passenger side airbag - No load compartment partition wall - No seat in cab, right side - No lashing eyes - Exterior noise reduction features - Speed limiter set at 100 km/h - Grab handles on A-pillars - Partial LED rear lamps - Hold function - Interior: instrument panel air vents - Flip lid for storage compartment - Dashboard charging package (additional USB ports and 12V socket) - Cable duct at rear portal - Cable duct on sidewall - Heated steering wheel - Fog lights with cornering function - Programmable special module - Park package with reversing camera - Interior rearview mirror - LED High Performance headlights - Rear and front mud guards - Driver’s seat heated - Driver’s seat with lumbar support - Comfort suspension seat for driver - Low seat base for driver’s seat - Rear door step - Rear underride guard - Cab heat insulation - Additional electric auxiliary air heater - Additional water heater Additional features: - 3rd brake light - Overhead storage above windscreen - Storage compartment below passenger dashboard - Adaptive brake light - Driver airbag - Acoustic package - Hill-start assist - Towbar wiring - trailer socket electrics - Power folding exterior mirrors - Electrically adjustable & heated exterior mirrors (both sides) - Blind spot assist for exterior mirrors - Outside temperature indicator - DAB tuner (digital radio) - Load compartment ceiling light with door contact - Automatic headlight activation - Rear right entry grab handle - Grab handle for sliding door at partition wall Iiodpezuvfiofx An Hjf - Safety assist: turning assistant - Safety assist: active brake assist - Safety assist: active lane keeping assist - Safety assist: start info assistant - Safety assist: Attention Assist (drowsiness detection) - Safety assist: Intelligent speed assistant - Safety assist: breakdown management - Safety assist: crosswind assist - Digital tachograph - 250A alternator - 9-speed GTronic automatic transmission - Rear doors (opening angle 270 degrees) - Body/type: high roof box with extended rear overhang - Instrument cluster with color display - Communication module (LTE) for digital services - Main fuel tank: 93 litres - Steering column adjustable (manual) - Multifunction steering wheel - Truck registration (N1 category) - Side marker lights - Mercedes-Benz emergency call system - Engine: 2.0 L – 140 kW CDI Euro 6 - MBUX multimedia system (10.25" touchscreen) - 4325 mm wheelbase - Tyre pressure monitoring system - Reversing camera - Euro VI emissions standard - Windscreen wipers with rain sensor - Seatbelt warning system (driver and passenger side) - Fabric seat upholstery - Engine start/stop system - Mid-dashboard USB charging port - 92 Ah AGM battery - Navigation pre-installation (for MBUX) - Remote Service Plus pre-installation - Heat-insulating glass (windscreen with top band filter) - Permissible gross weight: 5.2 t - Rain sensor We can...

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Iijdpfxjyttv Ro An Hjf

Year of construction: 2006, condition: ready for operation (used), A CNC punching and laser cutting system Amada is available. Laser resonator: C-4000A, travel path X/Y: 2500mm/1250mm, laser power: 4kW, laser type: CO2, max. laser gas pressure: 4bar, max. cutting capacity: steel/stainless steel/aluminum: 25mm/15mm/10mm. Machine dimensions X/Y/Z: approx. 5700mm/2500mm/2300mm, weight: approx. 6400kg, control system: Amada. Including transformer TG515 (70kVA), cooling block, extraction system Keller Vario and beam path purging system Alphapac. Documentation available. An on-site inspection is possible. Isdpfxoy Rtf Uj An Hsif

Condition: ready for operation (used), A Dudik bucket conveyor system with trolley is available. Trolley: Dudik RK2250, Travel drive: Bockwoldt/SEW FR 285 III, Conductor rail: Vahle MKHS, Bucket volume: 2250l. The mechanical drive was renewed in 2013. Documentation available. An on-site inspection is possible. Expected to be available from January 2027. Iijdpfx Anjzi Eiye Hof

Year of construction: 2001, condition: ready for operation (used), Various machines for laboratory use and pilot processes are available. 1) 2x Bioreactor system B. Braun Biotech Biostat 15L/Biostat C-CDU, year of construction: 2001, useful volume: 15l, control: Biostat C-CDU 1137. 2) Forced-air drying cabinet Heraeus (Kendro) UT 20, useful volume: 210l, internal dimensions X/Y/Z: approx. 610mm/510mm/680mm, max. temperature: 250°C, machine dimensions X/Y/Z: approx. 770mm/940mm/800mm. 3) Ultra cryostat Lauda K 75 with a cooling thermostat Lauda RUK 40S, bath volume: approx. 30l, min. temperature: -90°C. 4) Centrifuge CEPA 8L G, year of construction: 1985, speed: 17000rpm, drum diameter: 125mm, max. filling capacity: 10kg, power: 2.2kW. Documentation available. An on-site inspection is possible. Sale of individual units possible. Ijdsxvdfmjpfx An Heif

Year of construction: 2008, condition: ready for operation (used), Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible. Iodpfx Asx S Rbpon Hsif

Year of construction: 2005, condition: ready for operation (used), Screw diameter: 114mm, max. PVC throughput: 600 kg/h, max. screw speed: 20/min, number of heating zones for molds: 12, motor power: 76 kW, rated voltage: 3x 415V AC, rated current: 353A, rated power: 218kW, weight: 7.1t, operating hours: approx. 90,000h. Screws: Geometry designed for PVC profiles, water-cooled, cylinders: nitrided, air-cooled, equipped with a new PLC control system, vacuum pump, and power inverter for the main motor. An on-site inspection is possible. Iisdpfxezh Nibo An Hof

Year of construction: 2017, condition: ready for operation (used), A WMU projection brazing furnace, originally built in 1997, but completely refurbished and overhauled in 2017, is available. Heated length: 3750mm, max. operating temperature: 1150°C, heating zones: 4, heating elements: CRFeAl grade, heating capacity: 94kW, usable width: 400mm, usable height: 200mm, throughput: approx. 200kg/h, speed min./max.: 100mm/400mm/min, overall system dimensions X/Y/Z: approx. 19600mm/1900mm/3000mm, control system: PLC. Including an additional muffle, heating elements, conveyor belt and cooling segments. Documentation available. An on-site inspection is possible. Iijdpjzidkvjfx An Hjf

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Iodpoziphaofx An Hoif

Year of construction: 2011, condition: ready for operation (used), A CNC laser marking and engraving system for component marking is available. Laser class: 1, laser type: diode-pumped Yb laser, laser power: 20W, axis travel X/Y/Z: 390mm/560mm/275mm, max. workpiece dimensions X/Y/Z: 730mm/365mm/445mm, max. workpiece weight: 50kg, control system: AC-Laser. Documentation available. An on-site inspection is possible. Iiodpfx Anjyuyvte Hef

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Iedpjxf Ikfjfx An Hjif

Condition: ready for operation (used), Year of construction: 2006, A robust wood shredder is offered. Infeed width: 850mm, drive power: 90kW, rotor type: U-rotor, number of knife crowns: 45, motor speed: 1480rpm, control system: PLC. Equipped with control cabinet, U-rotor with 45 knife crowns, Holtec vibrating conveyor trough type DS 750 X/Y: 750mm/18500mm. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3800mm/1700mm/1400mm. Inspection possible by appointment. Iiodpfxszgwx Ie An Hjf

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Iiedpfx Anjzukt Io Hef

Condition: ready for operation (used), Bosch SM 4.7/20-G16 servo control module, part number 1070917161, serial number as shown in the photo, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Iisdji D Ufaspfx An Hjf

Condition: ready for operation (used), SEW Eurodrive BSHF502 EBH07/20/15 gearbox 1080100072 SN: 40.1785609003.0002.12, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iijdpsmah Acjfx An Hof

Condition: ready for operation (used), Bosch SM 4.7/20-G16 Servo Control Module, part number 1070917161, serial number as shown in the photo, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Iiedpfx Aji D Ufdsn Hjf