Used Tub Pasteurizer for sale (760)

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional mandrels without bending shoes: Kdsdpswnrt Ssfx Aktsl Ø 28, 2 x 38 + 42 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1994, Max. Rohrverschiebelänge: 3.000 mm 4-fold bend angle selector with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Including pre-assembly device with hydraulic cylinder Deburring unit for tubes inner and outer from 6 - 48.3 mm Tools included in the delivery: Edge teeth: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Kdodpoy Spfgjfx Aktol Bent shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Condition: used, Year of construction: 1999, color: red, mileage: 1,001 km, first registration: 01/1999, gearing type: other, driver cabin: other, Vehicle location: in transit, steel body, ramp Superstructure: city roll-off container with drive-over ramp, approx. 5 m³, year of manufacture unknown due to missing nameplate Kodpfx Akjy Spydjtedl Internal length approx. 4,000–4,500 mm All information without guarantee, as the vehicle is in transit! Accessory specifications without guarantee. Subject to change, prior sale and errors!

Condition: used, Year of construction: 1999, color: red, mileage: 1,001 km, first registration: 01/1999, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel superstructure, tailgate. Body: city roll-off container with drive-over tailgate, approx. 5m³, year of manufacture unknown as there is no type plate. Internal length approx. 4,000mm - 4,500mm. All information provided without guarantee as the vehicle is inbound! Accessory information and specifications are not guaranteed; changes, interim sale, and errors reserved! Kdjdpfxsy Spx Ts Aktjl

Condition: good (used), Manufacturer: Tracto Technik Type: TUBOMAT Year of construction: 1996 Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device Machine mobile and flexible to use Specifications Metric US Standard Max. Product Ø 42 mm Kedpfot Dk Ukex Aktjdl Min. product Ø 6 mm Max. Wall thickness 3 mm Max. Bending radius 5 mm Min. bending radius 180 mm Max. Bending length 2000 mm Deburring device Yes Sage device Yes Flanging device Yes Dimensions (estimate) Length 3500 mm width 1000 mm height 1200 mm weight 1000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max. tube Ø: 42mm Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Kdodpfx Aouccw Hjktsl Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: excellent (used), Year of construction: 2008, spindle bore: 52 mm, turning diameter over bed slide: 400 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,209 mm, total height: 1,800 mm, overall weight: 2,100 kg, Centre lathe Mexpol - TUB40 MACH-ID 9477 Make: Mexpol Type: TUB40 Year: 2008 DBC Turning Length: 1000mm Swing over bed Ø: 400mm Swing over cross slide Ø:250mm Spindle bore: 52mm Spindle power: 5.5kW Bed width: 300mm Tailstock spindle Ø: 60Ø Stroke pinole: 130mm Spindle taper: 4Mk Power: 5.5kW Speeds / ranges: 2135Rpm Feed rate X-Axis: 2000mm/min. Feed rate Z-Axis: 1000mm/min. Length: 2200mm Kjdpfxoyyxm As Aktjdl Width: 1209mm Height: 1800mm Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 73,000 mm, color: green, machine/vehicle number: S241645, Equipment: hydraulic folding, lighting, SPEARHEAD 730 STUBBLEMASTER Trailed Rotary Mower If you need to work more hectares, opt for a machine with a 7.3-meter working width. The 730 features the same special design as the 500, complete with a powerful 165 hp (123 kW) transmission. Larger farmers and contractors appreciate the five rotors. Each rotor is equipped with three straight and three angled blades, delivering the renowned double cut of the Stubble Master. This accelerates residue breakdown and improves soil structure. Kdsdpfx Aexlf N Sjktjl The monocoque deck design prevents dirt buildup, while the adjustable cutting height allows mowing just a few centimeters above the ground. Five rotors cover 7.3 meters in a single pass. Easy to clean thanks to the monocoque design. Precisely set your cutting height for maximum performance.

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Ksdpfxsyq Hgke Aktsdl Power: 4 kW Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports Kdjdpfx Akoy Sanrjtsl - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Kdedpoy Sai Nofx Aktsl Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: new, Year of construction: 2024, functionality: fully functional, For sale is a new machine for cutting hoses made of plastic or textile (Cutex TW-69TUB). - Cutex TW-69TUB base unit - Hardened upper and lower blades - Cutting length adjustable in 0.1 mm increments - Transport via conveyor belt Kodpfx Ajyay Duektjdl - Conveyor belt height and contact pressure adjustable - Mounted on a frame Optional (for an additional charge): A pre-feed device is available, which pulls the hose off the reel and feeds it to the cutting machine without tension. Also available as an option is a second set of blades (upper and lower blades). The machine is new and has never been used in production. It can be inspected and tested on site.

Condition: used, mileage: 858,100 km, power: 260 kW (353.50 HP), first registration: 11/2008, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, According to our "General and Special Terms and Conditions," and without any warranty or guarantee, we can offer you the following vehicle today, subject to prior sale, errors, and misprints. This offer is non-binding until the contract is concluded: Kdsdpfoy Nuuhex Aktsl Mercedes Benz Citaro LE Interurban Bus with partial leather seats, seat belts (Vehicle No. 305) First registration: 20.11.2008 858,100 km Engine: 11,967 cc 260 kW / 354 hp Euro 5 EEV TÜV and SP due Gross vehicle weight: 19,000 kg Unladen weight: 13,020 kg Payload: 5,980 kg Front axle load: 7,245 kg, rear axle load: 11,500 kg Overall length: 13,057 mm, overall width: 2,550 mm, overall height: 3,400 mm 50+20 seating and standing places + wheelchair/pram space or 50+15+1 Seat belts, armrests, leather headrests Ramp at double door Single door at the front, double door at the rear Windscreen with stone chip damage Air conditioning, auxiliary heating, ventilation Radio / CD LAWO No ticketing system installed Emergency exit Electric mirrors with heating Fire suppression system out of service, fire extinguisher needs reprogramming, battery was disconnected Engine has oil moisture Full air suspension Fully automatic transmission Tyres: 275/70R22.5 approx. 30% front, approx. 30% rear Price: €7,500 (net) All details are provided without any warranty or guarantee. Our "General and Special Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €10,000 is the District Court of Ludwigslust; for values beyond this, the Regional Court of Schwerin. Subject to error, misprints, and prior sale.

Condition: used, empty load weight: 10,720 kg, maximum load weight: 37,280 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 02/2027, suspension: air, tire size: 245/70 R17,5 ---/141J, color: other, gearing type: other, front tire size: 245/70 R17,5 ---/141J, rear tire size: 245/70 R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, completely drive-over, -- Misprints, errors and changes excepted, sample images --, More data at: !, More Details: ! Kdedpfx Asy Nzg Roktol

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 0751801060702, For sale: BLM GROUP BLM LT FIBER tube and profile laser cutting machine with Active Scanner, equipped with an IPG Photonics YLS-2000-CUT 2000 W laser source. The machine is fully operational, both technically and in production, and is in continuous use at a manufacturing facility (current laser beam operating time: 6,950 hours). The machine features an integrated automatic material loading and unloading system, significantly increasing production efficiency and operator convenience. Technical data: • Model: LT FIBER • Laser type: Fiber • Laser source: IPG YLS-2000-CUT • Laser power: 2 kW • Laser source year: 2018 • Power supply: 380 V / 3-phase / 50 Hz • Installed power: 26 kVA • Machine weight: approx. 9,000 kg Machine advantages: • Fully production-ready • Equipped with ACTIVE SCAN and a seam position detection camera • Integrated loading and unloading system • Possibility to perform tests during operation • High cutting quality and precision • Regularly used Kodoy Sf Eijpfx Aktodl • Ready for further operation Additional photos and videos of the machine in operation can be provided, as well as the possibility to inspect the machine under power on site. Price upon request

Condition: new, maximum load weight: 1,885 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,040 mm, loading space width: 1,510 mm, loading space height: 1,800 mm, total width: 2,026 mm, total height: 2,460 mm, Year of construction: 2026, Humbaur Box Trailer HK 253015-18P FlexZurr with Overrun Ramp in White Instead of Rear Door, Max. Load 300 kg, with Tapered Ramp Edge. Description: Our tandem axle trailer is engineered for maximum stability: hot-dip galvanized steel chassis, plastic door seals, heavy-duty roof and front wall reinforcements – this trailer is built for long-lasting use. The integrated load securing system guarantees safe transport of your cargo. An interior light ensures sufficient illumination inside. In short, your goods arrive reliably and undamaged. Technical Data: Trailer Type: Tandem Axle Construction: Plywood Door Opening Dimensions: 1400 x 1750 mm Unladen Weight: 615 kg Gross Weight: 2500 kg Payload: 1885 kg Internal Length: 3,040 mm Overall Length: 4,525 mm Internal Width: 1,510 mm Overall Width: 2,026 mm Internal Height: 1,800 mm Overall Height: 2,460 mm Kedpey Ng Utofx Aktodl Loading Height: 565 mm Tires: 15 inch Equipment: V-drawbar, hot-dip galvanized by immersion 13-pin connector 15 mm reinforced floor panel Side walls and roof made of 15 mm multi-layer plywood with UV-resistant synthetic coating Interior light installed Tie-down rings integrated into frame profile, lashing capacity 400 kg per ring (Dekra certified) Fully automatic jockey wheel Humbaur multifunction rear lights with reversing light All our prices include handover preparation, 19% VAT, and registration documents.

Condition: new, Year of construction: 2025, Complete set double use laser machine ( 3 and 6 Kw in stock ) sheet metal 3015 ( 3 x 1,5 meter ) Tube 15 to 240 mm diameter tube length 6,3 meters include necessary options for a perfect laser line. include 1 filter installation ( cutting air can leave in factory ) include anty fire box. include Vacuum lift for sheet metalplate 800 kg load. no cable unit work on battery in vacuum unit. include 1 compressor for 16 BAR it give posibility to cut steel without gas. for quick cutting and SST steel it save lot of air and can increase the cutting feed consummable for long time cust free cutting time. include vacuume lifter from 800 Kg lifter work on battery in lifter box so with loading machine no cables around you special for save working arear. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Ksdpfx Aenqzb Ijktsdl Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, Description BAISON V52U(12+12 meters): (12 or 20 kW) FOUR-CHUCKS HEAVY-DUTY TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND UNLOADING SYSTEM 12 meters automatic loading system + 12 meters automatic unloading system (can be equipped in different configurations ex:12+6 meters) This machine is also for profile, tub and different shape. Tube size range: Round tube: φ50-φ500mm Square tube: □50*50-□500*500mm Channel Steel: 5#-50# Angle Iron: 200*200mm I-beam:10#-50# H-beam:100*100mm-500*500mm Laser Power 12.000 W (Raycus) Max. Single Tube Weight 2.000 kg Claw Stroke Full stroke Min. Tail Length 0 mm Max. chuck speed 40 r/min Max Speed 50 m/min Max Acceleration 0.4 G Max. Tube Cutting Length 12.000 mm Ultra-short Tail Material 0 mm X-axis 500 mm Y-axis 12.000 mm Z-axis 500 mm Positioning Accuracy (X/Y) ±0.05 mm/m Repeated Positioning Accuracy (X/Y) ±0.05 mm Power Data 130kw / 225A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 29.080*5.000*3.250 mm Machine Weight 28.165 kg(Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 12 kW Laser head with automatic focus – RAYTOOLS BS12K-3D Controller system – FSCUT 5000A Automatic self-centering pneumatic chucks Semi-automatic loading system with chain Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – K.H Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Complete CE standard - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Kedpovcbw Dofx Aktsdl Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Kdsdpfxevcbrho Aktsl Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, PRICE REDUCED!!!! We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Phases: 3 Supply frequency: 50 Hz Total installed power: 21 kVA Interrupting capacity: 25 kA Control voltage 1: 24 V Kjdpfx Akoyui Ekotedl Control voltage 1 type: DC Control voltage 2: 220 V Control voltage 2 frequency: 50 Hz Weight: 10000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Kedpfx Aouluhwektjdl Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: new, maximum load weight: 890 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,515 mm, loading space width: 1,320 mm, loading space height: 1,527 mm, total width: 1,806 mm, total height: 2,125 mm, Year of construction: 2026, Humbaur Box Trailer HK 132513-15P FlexZurr with rear drive-over ramp in white instead of door, max. load 300 kg, with drive-over tip. Technical specifications: Trailer type: Single axle Construction: Plywood Unladen weight: 410 kg Gross weight: 1300 kg Payload: 890 kg Internal length: 2,515 mm Kodpfxjy Iq Ubj Aktjdl Total length: 3,821 mm Internal width: 1,320 mm Total width: 1,806 mm Internal height: 1,527 mm Total height: 2,125 mm Loading height: 535 mm Ramp angle approx. 21° Tyres: 14 inch Equipment: V-drawbar, hot-dip galvanized in immersion bath * 13-pin plug * 15 mm strong flooring * Side walls and roof made of 15 mm multi-layered plywood with UV-resistant plastic coating (GRP top layer on models 5290.002 & 5291.002) * Interior light installed * Galvanized rotary rod lock and hinges * 6 lashing rings, flexibly adjustable in the frame profile, lashing capacity 400 kg per ring, Dekra certified * Jockey wheel Description: Our single-axle trailer is constructed for maximum stability: hot-dip galvanized steel chassis, plastic door seals, reinforced roof and front wall - this trailer is built for longevity. The integrated lashing system secures your load inside. An interior light ensures adequate illumination. This keeps your goods reliably and safely protected during transport. Our prices include delivery, 19% VAT, and vehicle documents.

Condition: ready for operation (used), Year of construction: 2010, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Process/software features: NoLine, PowerLine, ContourLine, Laser power control, Programmable cutting pressure, Program repeat, Automatic blow-off, Work interruption lighting, Hole-punching function (laser) • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting head: Laser cutting head with 155 mm lens • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Capacitor power 1600 N/cm², Safety with macro stops Additional equipment Kjdpsx D I H Djfx Aktjdl • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 216 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • LoadMaster Tube 6 m with belt support, 2 grippers • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Year of construction: 2021, condition: used, functionality: fully functional, Nedo Pipe Laser TUBUS 2 TUBUS 2 — Year of manufacture 2021 Kdedpfx Akoy A E Uxstsl Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,950 plus VAT | EXW Einbeck | Delivery upon request

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Kdjdpsy Efbksfx Aktol