Used Used Wet Dust Extractor (Extraction System) for sale (69,467)

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160, Holzkraft For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft Chip collection volume: 2 x 165 l Nominal outer diameter of the extraction nozzle inlet: 160 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Nwodpfx Ashkzttecfeh Sound pressure level max.: 73 dB(A) Volume flow Nominal volume flow: 1448 m³/h Dust class: H3 Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug, 5-pole, and phase inverter Two swivel casters and two fixed casters with parking brake Manual cleaning Art. No. 5131620 Location: Available in stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Nwsdpeuc Unqjfx Acfjh Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: new, functionality: fully functional, MIDI MAX is the cheapest and most practical solution for dust removal, allowing you to have a large filtration area and a large collection bag. The MIDI MAX suction filter unit is a very reliable system for filtering dust and small sawdust where the quantity is not so large as to require the use of a separate container. Nwodpfewfgnxox Acfoh

Condition: used, Year of construction: 2010, power: 15 kW (20.39 HP), volume flow: 8,000 m³/h, actuation type: electric, We are offering this used Hurrican HF 3-355 Direkt stationary extraction unit, year of manufacture 2010. Nwodpfx Aezb Immscfjh Machine type: HF 3-355 Direkt Airflow: 8000 m3/h Max. total pressure: 3550 Pa Motor power: 15 kW Motor type: 160 M2/B3-85 Operating speed: 2950 rpm Housing position: R0 0 Suction side design: 355 FEF Pressure side design: 350 B Year of manufacture: 04/2010 If you have any questions or need more information, please send us a message or call us.

Condition: new, Year of construction: 2026, The CORMAK ODL6K extraction and filtration system is a modern solution that provides safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. The ODL6K is distinguished by an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. This is a comprehensive solution that increases safety, improves work efficiency and extends the service life of laser systems. The ODL6K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL6K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Nedpfx Ajwcd I Rocfowh Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL6K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fireproof filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient dust collection and cleaning, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters Number of filter cartridges 6 Air flow 6000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 7.5 kW Inlet diameter 300 mm Weight 590 kg Dimensions (L x W x H) 1150 x 1950 x 2250 mm

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. Nwodswcdrvjpfx Acfjh The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Dimensions (L x W x H) 1050 x 1400 x 2250 mm

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Nwsdpeyym A Sjfx Acfjh

Condition: used, Year of construction: 2017, functionality: fully functional, filter area: 69.2 m², overall weight: 1,336 kg, year of last overhaul: 2025, Equipment: CE marking, We are offering this used AL-KO EJ DUO 6 ZRS OV stationary dust extraction system, manufactured in 2017. Type: EJ DUO 6 ZRS OV Type number: P170701 Manufacturer's number: 2433376133 Year of manufacture: 2017 Filter area: 69.2 m² Weight: 1336 kg Air filter design: Category M, elect., 1.44 m Item number: 85100401 Filter hoses were replaced in November 2024. Compressed air cleaning with integrated compressed air tank – time-controlled. Includes all pipelines and valves (including 1 pneumatically controlled valve). The filter station has 6 connections for exhaust air intake. Includes 6 fans. Nedpezbp Rmefx Acfowh Chip removal: after the filter station, there is a Vexat-compliant rotary valve airlock, a ring line with a fan, and a separation box, below which there is another Vexat-compliant rotary valve airlock. Currently, in winter, the chips are conveyed via a screw conveyor into the silo; in summer, they are filled into big bags. The system can currently be inspected while in active operation until the end of July. Collection by self-dismantling is possible from August 1st to no later than the week of August 3rd. Only B2B sales, excluding any warranty. If you have any questions or require further information, please send us a message or call us.

Condition: used, ALKO clean air extraction unit, Power Unit 200P - used Air filtration using filter hoses, Cleaning performed pneumatically, Dust-tested, Nodpfx Acsy T Ebgjfjwh Mobile collection container ----- Technical data ----- Extraction nozzle diameter: 200 mm, Nominal air flow rate: 2,261 m³/h, Maximum negative pressure: 2,174 Pa, Number of bags: 2, Motor: 3 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,300 x 850 x 2,050 mm, Weight: 470 kg

Condition: used, Clean air extraction HÖCKER-POLYTECHNIK Vacumobil EA 250-4 -ge Air filtration via filter bags, Motorized cleaning, Dust tested, Mobile collection bin Nwsdpfxsy R Upze Acfjh ----- Technical specifications ----- Extraction nozzle Ø: 250 mm, Nominal air flow: 4,241 m³/h, Minimum air flow: 3,534 m³/h, Number of collection bags: 3 pcs, Motor: 4 kW, Dimensions (LxWxH): 2,500x1,280x2,500 mm, Weight: 630 kg

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 Njdpeu R Szyefx Acfowh - new exhibition machine -

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine extraction systems for air volumes of up to 10,000 m³/h. can be used. Manufactured in accordance with the new EU standard EN 16770 they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 180 mm, Nsdpfxsu T Hris Acfjwh Volume flow: 2,610 m³/h, Nominal volume flow: 1,832 m³/h, max. negative pressure: 2,450 Pa, Filter area: 13.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 2 pieces, Motor: 3.0 kW, Dimensions (LxWxH): 2,085 x 900 x 2,130 mm, Weight: 414 kg, Sound pressure level: 76 dB(A), Dust class: M incl.: an attached control cabinet

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Nodpeyq Nl Njfx Acfowh Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m Njdpfx Acol Dw U Defswh We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Nedpfx Ajib Dadocfewh Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Year of construction: 2014, condition: excellent (used), Professional, pneumatic cleaning booth with dust extraction. It is used in power plants, cement and gypsum factories, mills, and companies involved in mixing, including the chemical industry, as well as in metallurgy, where dust can have a very negative impact on the health of personnel. By using cleaning booths, we prevent the spread of dust and hazardous substances to restrooms, changing rooms, etc. Nwsdpshm E S Aefx Acfoh The booth provides personnel with a simple option to clean themselves during work, e.g., before morning and lunchtime breaks, and at the end of the shift. Dust extraction unit, EX version. Year of manufacture: 2014 Filtration area: 16 m2 Capacity: 2500 m3/h Negative pressure: 2400 Pa The unit is in very good condition.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 2804221, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, volume flow: 18,000 m³/h, suction capacity: 18,000 m³/h, filter area: 60.6 m², actuation type: electric, The EK-24 unit is a dust and chip extraction and filtration system for wood and wood-based material processing. The unit is manufactured by the Polish company Euro-Komplex, which specializes in the design, production, and installation of comprehensive dust extraction systems used in various industries, particularly in woodworking and furniture factories. The filter effectively removes contaminants from multiple machines simultaneously, such as circular saws, panel saws, four-sided planers, veneer coating machines, CNC machines, milling plotters, and sanders. Technical specifications: • Airflow: 18,000 m³/h • Filtration area: 60.6 m² • Number of filters: 48 pcs / 2000mm / 200mm • Electrovibrator: 0.09 kW x 2 • Control cabinet with frequency converter • WTK fan • Air lock • Dry fire tube The filter's robust and solid construction is made of hot-dip galvanized or powder-coated steel with a thickness of 2mm, and the inlet tunnel and reinforcements are made of 3mm steel. The structural elements are fastened with 8.8 screws with Teflon inserts. It is worth noting that the filter basket used is uniform and smooth, without welded elements, which facilitates airflow with waste fractions without depositing them on the basket walls. The EK-24 is equipped with an 0.09 kW electrovibrator in an ATEX system, used to clean the filter bags made of antistatic and waterproof material with a weight of 350g/m² and an air permeability of 240l/dm²/min. The cleaning system is fully automated and operates in appropriately selected time cycles adapted to the type of dust being extracted. Thanks to the use of an air return lock (summer/winter flap), in winter, the cleaned and filtered air returns to the production hall, which has a very beneficial effect on maintaining the appropriate temperature and provides measurable financial benefits. Nsdjzba E Ispfx Acfewh The WTK fans used in the EK-24 have self-cleaning impellers and a reinforced design, which guarantees stable operation for a long time. Electrical control is carried out using a control unit equipped with protection and a time control system for the electrovibrator and the fan motor. The control cabinet is equipped with a frequency converter, which enables the adjustment of the fan motor speed and provides very precise control. The air lock is used to separate the filter zone from the external zone. It blocks the airflow, allowing only wood chips to pass through, so they fall freely into the bag without an air blast. The air lock is equipped with a system that mitigates the impact of the impeller in case a large solid object enters the unit. It is equipped with a dry fire tube mounted on the filter, used to quickly supply water or extinguishing agent to the closed filter chamber using internal sprinklers. The installation is equipped with a fire brigade connection necessary to connect fire department equipment or a hose directly from a fire hydrant. The filter also has a pressure relief device, which lowers the pressure in the event of an explosion. It is designed to relieve an explosion developing inside a protected device, such as hoppers, silos, separators, filters, sorters, etc., where an explosion hazard exists. By releasing the explosion into the environment, the explosion pressure is reduced to a value below the allowable pressure resistance of the protected device.

Condition: excellent (used), Year of construction: 2023, For sale is a used Felder RL-140 automatic clean air extraction unit with a maximum air flow rate of 2500 m³/h. The extraction unit has been inspected and refurbished by our service team and is in very good condition. Technical data: - Max. air flow rate 2500 m³/h - H3 dust-tested - Automatic filter cleaning - 10 m³ filter area - Extraction port diameter 140 mm Nedjza Dz Ropfx Acfowh - Motor power 3 kW / 4.1 HP - Year of manufacture 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-T03VW

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Nodpfx Acovviytofewh Storage location: Nattheim

Condition: good (used), Year of construction: 2008, Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm Nsdpfxsfrpnws Acfewh -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Condition: good (used), Code: 0306 Brand: VM Model: 2/18 Nwedpfxjymfiio Acfoh Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

Condition: new, Year of construction: 2025, functionality: fully functional, A frequency converter with a pressure transmitter automatically adjusts the fan's output to the actual demand. Right-hand version with connection diameter: 350 mm, including flange. JET cleaning system. Motor power: 15.0 kW Filter area: 50.2 m² Nominal volume flow: 6927 m³/h Njdpjy T Rg Iofx Acfswh Maximum volume flow: 10000 m³/h Negative pressure at 20 m/s in the intake nozzle: 3620 Pascal (in a dusty state) Collection volume: 4 x 160 liters 5-meter connection cable with 32A CEE plug.

Condition: new, Year of construction: 2025, functionality: fully functional, Right-hand version with connection diameter: 350 mm, including a flange JET cleaning system Motor power: 11.0 kW Filter area: 50.2 m² Nominal volumetric flow rate: 6927 m³/h Nsdpfx Acey T Rdmofswh Maximum volumetric flow rate: 8000 m³/h Negative pressure at 20 m/s in the intake nozzle: 3162 Pascals (in the dust-laden state) Collection volume: 4 x 160 liters 5-meter connection cable with 32A CEE plug

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, power: 75 kW (101.97 HP), volume flow: 65,000 m³/h, suction capacity: 65,000 m³/h, Stationary filtration system, VENTIL VENETA brand. Nwjdpoy Um Tysfx Acfjh

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. Nwsdpsx Da Tiefx Acfjh All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.