Used Vaptech Bg Eccentric Press Pe 160 Cl for sale (25,542)

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Accessories / Special features: • Adjustable table • Foot release Bjdpoy D Abfsfx Ahmewu Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm table surface area 1100 x 850 mm dayligth 500 mm ram surface 800 x 600 mm ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW Bjdpfx Ahsvb I Itomowu weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: used, Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible. Bwsdpszvy Hasfx Ahmju

Condition: good (used), pressing force: 50 t, stroke length: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Ram size 300 x 280 mm Table size 500 x 800 mm Bwsdpfx Aett A T Tshmju Machine LxWxH: 160 x 120 x 260 cm Machine weight: 6 Ton

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t Bwsdpfxjfx Hv Hj Ahmju throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Technical details: pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine approx.LxWxH: 1,3 x 1,1 x 1,95 m Bwodpfx Ahou Nflijmou High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) Bwsdpfx Ajvbk Rwjhmou - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Condition: used, Year of construction: 1950, pressure 500 t distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Bwedpeyutvyefx Ahmsu apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 1984, functionality: fully functional, pressing force: 50 t, stroke length: 54 mm, total length: 1,750 mm, total width: 1,400 mm, total height: 3,000 mm, overall weight: 7,500 kg, year of last overhaul: 2022, DGUV certified until: 12/2027, ram adjustment: 80 mm, KAISER V50W high-speed stamping press, year 1984, extensively mechanically and electrically overhauled and modernized in 2022. The machine is in very good working condition and ready for operation. Technical data: Press force: 500 kN / 50 t Table size: approx. 800 × 550 mm Stroke: 54 mm Ram adjustment: 80 mm Speed: up to 400 strokes/min Main motor: SEW-EURODRIVE, 59 kW Year of manufacture: 1984 Retrofit / modernization: 2022 Equipment / modernization: New electrical equipment Siemens SIMATIC PLC control Siemens SIMATIC HMI touch panel Bjdpfx Aoz D Dq Nehmswu New 59 kW SEW-EURODRIVE main motor SEW drive/inverter PILZ safety system UNIDOR LVCpro press-force monitoring system Two UNIDOR piezoelectric force sensors on the connecting rods Separate monitoring of left/right and total press force on the HMI New electrical cabinet and modern safety components

Condition: good (used), pressing force: 80 t, throat depth: 400 mm, ram adjustment: 80 mm, Capacity: 80 Ton Table surface: 750 x 550 mm Ram Adjustment: 80 mm Stroke length: 8 -112 mm Bjdpeugtkxofx Ahmswu No. of strokes: 78 p/min. Throat: 400 mm Complete with: - Pneumatic clutch - Safety screen Country of origin: Germany Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight: 7000 kg

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection Bwjdpfstrhf Aex Ahmou - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: excellent (used), Eccentric press Inventory no. 3341 Manufacturer: Ter Hart Type: EP 13 * Pressing force: 13 tons * Stroke adjustment: 5 - 50 mm Bjdozi Erhspfx Ahmjwu * Adjustable ram: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 200 mm * Overhang: 115 mm * Foot/hand operation (guard) * Protective guard (hand) * Weight: 520 kg

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm Bwjdpet Ei Hnjfx Ahmou table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: good (used), Year of construction: 1966, Machine number: 6665/66 Type / Model: PEDV 10/II-S Pressing force: 10 t Table: 450 x 300 mm Ram: 190 x 140 mm Ram stroke: 6 to 50 mm Downward ram adjustment: 45 mm Upward table adjustment: 140 mm Die opening: 140 mm Overhang: 170 mm Bwjdoh Tktijpfx Ahmou Maximum distance between table and ram: 320 mm Stroke rate: 160 /min Sheet metal thickness per stroke: 2 mm Sheet metal thickness for continuous stroke: 1 mm Connection: 1.2 kW Accessories/Equipment: Condition: good Weight: 1.0 t Dimensions: 900 x 850 x 2,200 mm

Condition: used, Year of construction: 1989, pressure 150 t Bjdpfx Ahsxh Sw Ujmowu throat 310 mm stroke 30-120 mm no. of strokes 20-60 Hub/min ram - range of adjustment 90 mm table surface area 820x600 mm ram surface 550x430 mm hole in the table 330x200 mm table height 750 mm tool hole in ram Ø50 mm weight of the machine ca. 9,5 t dimensions of the machine ca. BxTxH 2500x2500x3000 mm

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm Bodjhqqnzopfx Ahmewu LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 12501, functionality: fully functional, pressing force: 10 t, table width: 222 mm, table length: 322 mm, overall weight: 450 kg, installation height: 197 mm, ram adjustment: 30 mm, stroke adjustment: 42 mm, Used San Giacomo eccentric press T 10V CE in very good condition, with a base frame for pallet truck transport. Further details available upon request. Bodox A Ah Tepfx Ahmswu

Condition: good (used), Year of construction: 1986, Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons Bjdpfx Ahoi Agynsmowu -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Condition: used, Year of construction: 1990, pressure 125 t throat 360 mm stroke 8 - 140 mm daylight, max. stroke above - ram adjustment above 500 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm Bwodpfoyatx Eex Ahmeu clamping plate 990 x 670 mm clamping plate thickness 80 mm no. of strokes 60 Hub/min tool shank hole (depth x diameter) 90 x 50 mm total power requirement 23 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm - Hydraulically operated Ortlinghaus clutch-brake combination - Belt drive - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized tappet height adjustment - Semi-automatic stroke adjustment - Manual TDC correction - Fixed table - Reverse switch (return) - Electric stroke counter - Electric preselection counter - Cam switch mechanism The machine is partially overhauled in-house as follows: - Disassembled, cleaned, and completely technically inspected - New paintwork (also available according to customer specifications) - New seals - New control cabinet with touchscreen, including wiring of the machine - Current press inspection

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: A5137, functionality: fully functional, Refurbished 100-ton HEILBRONN C-press, currently undergoing retrofitting - available at short notice. Hydraulic clutch-brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc., new control system (adjustments still possible). Dimensions - see machine drawing as PDF. Technical specifications: Press force: 1,000 kN Speed: 50 rpm (variable speed optional) Variable stroke: 14 - 150 mm Bsdpfx Ajwb A Dzehmowu Ram adjustment: 80 mm Installation height: 420 mm (max. stroke at bottom, adjustment at top) Table: 650 x 500 mm Ram: 400 x 250 mm Thrust: 350 mm Drive power: 5.5 kW Approx. weight: 5,500 kg

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m Bwsdpsxh Swhsfx Ahmeu

Condition: new, Year of construction: 1984, pressure 80 t throat 280 mm stroke 10-100 mm no. of strokes 52/80 Hub/min Bodpowa Umlefx Ahmjwu ram - range of adjustment 60 mm table surface area 850x550mm mm ram surface 420x220 mm hole in the table 300x200 mm table height 780 mm tool hole in ram Ø 45 mm weight of the machine ca. 4,5 t dimensions of the machine ca. 2000x2000x2700mm m

Condition: used, Year of construction: 1990, EBU 160t TYPE HK160F PRESSURE: 160t UP TABLE DIMENSIONS: 1000x500mm DOWN TABLE DIMENSIONS: 1200x800mm STROKES PER MINUTE: 80 STROKE LENGTH: 20-200mm DAYLIGHT: 600mm POWER: 15kw Bodpfjzktzyox Ahmewu WEIGHT: 17,500 kg THE MACHINE IS IN EXCELLENT CONDITION AND READY FOR LOADING.

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm Bwodpfx Ahjcxxx Hemju ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: used, Year of construction: 1967, pressure:80 t throat:280 mm stroke:20-120 mm table width:710 mm table depth:560 mm ram head dimension:560x355 mm ram adjustment:72 mm Bedpfxjcxxrho Ahmewu no. of strokes:125 Hub/min total power requirement:9,5 kW weight of the machine ca.:4,4 t