Used Vem Z2 Kra 80,2/6 for sale (50,670)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Nsdpfx Aod Tqalskyocr Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights. Ncedoguk A Hspfx Akyer

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Nsdpfjmhhl Hjx Akyecr Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Nodoguk Dvopfx Akyjcr - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), functionality: fully functional, mileage: 1 km, power: 170 kW (231.14 HP), fuel type: diesel, empty load weight: 10,500 kg, overall weight: 14,100 kg, tire size: 395, axle configuration: 4x4, wheelbase: 3,850 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, all wheel drive, crane, cruise control, differential lock, hydraulics, navigation system, onboard computer, soot filter, trailer coupling, Kranimog Special Edition KARL – Special Model! Unimog U5023 with HMF crane featuring 6 extensions and WINCH! – Optionally available with work basket! The Unimog boasts an overall height of just approx. 3.68 m with large Michelin tires! Key Equipment – further details upon request – of the Unimog: - Central tire inflation system - Off-road reduction group - EAS automatic shift - Transmission power take-off - Rear crossmember for increased trailer load - Trailer coupling - Air conditioning - Driver's air-suspended seat - Front and rear view cameras, monitor - Generation 2 digital tachograph - Vertical exhaust system - High-performance engine brake HMF crane 1620 with 5 extensions and winch – WORK BASKET available as an option! ==> Scharmüller trailer drawbar with truck coupling and/or car coupling – with truck approval (a specialty, exclusive to us) Combined with the Scharmüller crossmember and drawbar, the following towing capacities are possible: - Trailer with continuous braking system: 21,000 kg - Trailer with overrun brake: 3,500 kg Ncjdpfx Aekqfq Aokyer - Trailer without brakes: 750 kg - Central axle trailer: 13,000 kg with support load: 1,000 kg  This makes the U5023 a multifunctional towing vehicle, whether for passenger car trailers, central axle trailers, or classic turntable trailers – for every required height, the right coupling is available!  Ideal for crane operation, as the Unimog itself is compact and can tow very long trailers.  Our special model also features a working group gearbox: perfect for precise maneuvering, enabling clutch-friendly operation and always providing an appropriately selectable speed as needed. Offer subject to change, only while stocks last – prior sale reserved. The Unimog is still occasionally in use, mileage may vary!

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 80 mm, turning diameter: 560 mm, center width: 2,000 mm, New CNC cycle lathe ZDM 560 x 2000 with Siemens 828D ShopTurn 2. Machine Overview The ZDM 560 x 2000 is a robust and versatile flat-bed CNC cycle lathe designed for flexible production, maintenance, and training environments. It combines the benefits of conventional lathes with state-of-the-art CNC control technology. Thanks to the Siemens 828D ShopTurn control system, it enables simple and intuitive programming. The machine is particularly suitable for single-part and small batch production and is available for immediate delivery from stock. 3. Technical Data ZDM 560Z Swing diameter over bed (mm): 560 Swing diameter with 6-position turret (mm): 420 Max. workpiece length (mm): 2000 Max. turning length (mm): 1900 Max. turning length with 6-position turret (mm): 1735 Max. swing diameter over cross slide (mm): 330 X-axis travel (mm): 320 Z-axis travel (mm): 1970 Rapid traverse X/Z (m/min): 8/10 Spindle mount: A2-8 Spindle bore (mm): 80 Spindle nose taper: MT7 Spindle speeds (RPM) with manual chuck: 27-135 / 55-270 / 160-805 / 325-1630 Gear stages: 4-speed Tool shank (mm): 32x32 Tailstock quill diameter (mm): 75 Tailstock quill stroke (mm): 150 Tailstock quill taper: MT5 Main motor (kW): 7.5 Net weight (kg): 4100 Machine dimensions LxWxH (mm): 3000×1250x1580 4. Standard Equipment • Siemens SINUMERIK 828D ShopTurn • 80 mm spindle bore • 250 mm 3-jaw chuck • Manual tailstock • Coolant and lubrication system • Full enclosure • LED work light • CE conformity 5. Stock Machine Features • Chip conveyor for 2000 mm machine • 6-position electric tool turret • Fixed steady rests (60–190 mm and 150–280 mm) • Teach-in control panel with handwheels and joystick Njdpfx Akjqwqiajyscr Additional accessories available on request 6. Special Features / Benefits • Easy operation via ShopTurn • High flexibility for single-part and small batch production • Robust cast construction • Large spindle bore for bar machining • Immediately available – no delivery lead times 7. Scope of Delivery Machine including standard equipment and above-mentioned special equipment, ready for operation. 8. Delivery Time Immediately available from stock in Stockstadt.

Condition: good (used), Size max: 430 x 300 mm Book thickness: max 60 mm Speed max: 6000 c/h Height: 1400 mm Nedpfx Aksd Tnh Eeyjcr Width: 1600 mm Depth: 900 mm Weight: 560 kg (approx.)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, injection pressure: 1,795 bar, opening stroke: 2,100 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Max. mold opening force: 560 kN Moving platen opening force: 89 kN Moving platen closing force: 92 kN Mounting platen (h x v): 1,600 x 1,550 mm Clear daylight (h x v): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Min./max. mold installation height: 500 / 1,100 mm Max. mold weight: 12,200 kg Max. opening width: 2,100 mm Ejector stroke: 300 mm Ejector force forward/back: 200/100 kN Ncedpsyv Acmofx Akyjr Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow rate: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & Weight Space requirements (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Pump motor rated power: 90 kW Installed heating power: 53 kW Barrel heating control zones: 7 Oil fill volume: 1,500 l Operating hours: 50,000 h EQUIPMENT Oscillating elements 1 x air valve Tie-bar pulling device 3 x hydraulic core pulls on moving side 2 x hydraulic core pulls on fixed side 20 x hot runner controllers Robot interface as per Euromap 67

Year of construction: 1999, condition: excellent (used), Rovema VPI 260E vffs machine with powder auger filler. Optionally with full new electronics. Ncodpfx Akoiwdgpsysr

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 160–1000 CX Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 160–1000 CX Year of Manufacture: 2012 Operating Hours: 57,654 hours Category: Hydraulic Injection Moulding Machine 🔧 Clamping Unit Clamping Force: 1,600 kN (160 tons) Ncedpeyv E E Dsfx Akyor Platen Dimensions: 820 × 845 mm Tie-bar Distance: 520 × 520 mm Minimum Mold Height: 300 mm Maximum Opening Stroke: 950 mm 💉 Injection Unit Screw Diameter: 50 mm Injection Volume: 432 cm³ Shot Weight: 393 g Injection Pressure: 2,304 bar ⚡ Electro-hydraulic System Pump Motor Power: 37 kW Heater Power: 18.7 kW 👉 Option to install Energy Saving System (ESS) – actual energy consumption reduction by up to 30–60% 📐 Dimensions & Weight Machine Weight: 9 tons Dimensions (L × W × H): 5.54 × 2.06 × 2.18 m

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch) Ncodpfxevfx Uls Akysr

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw Ncsdju R S Dhjpfx Akysr - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg Ncsder A Eq Rjpfx Akysr VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.03 mm, workpiece weight (max.): 1,000 kg, overall weight: 5,000 kg, Including 7.5 kW extraction system Compact, space-saving, and affordable fiber laser Manually extendable work table - electrically assisted Work table safety door opens and closes electrically Sturdy welded construction for high rigidity, precision, and durability Machine bed shielded by manganese steel plates to protect against heat, sparks, and slag Effective cutting fume extraction; controlled flaps focus the extraction power on the current work area Raycus laser source with autofocus laser head from HSG (optional laser source from IPG) Laser head with faster focusing speed than comparable units, resulting in higher penetration speeds with thicker materials Main lens protected by an easily replaceable double protective lens Efficient water cooling of the laser head Power stabilizer to compensate for voltage fluctuations, thus ensuring consistent cutting quality Very easy handling of the machine and the user-friendly software Control software with numerous templates for programming simple components Material storage management Ncsdpfx Aowf H Avskysr User-friendly nesting software with many features Camera-monitored laser work area with transmission to screen

Year of construction: 2020, condition: ready for operation (used), overall weight: 6,200 kg, pressing force: 10 t, Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details. Ncodpfx Asyr Hl Askyjr • Stroke: 270 mm • Motor power: 11 kW • Voltage: 400 V / 3 phases • Oil tank capacity: 150 liters • Backgauge (X-axis): 650 mm • R-axis travel: 200 mm Technical Specification Bending Length 2600 mm

Condition: good (used), Year of construction: 1999, clamping force: 650 kN, Manufacturer: KraussMaffei Kunststofftechnik Munich Model: KM 65-160 C2 Clamping force: 650 kN Machine No.: 641070 Order number: 643883/1 Year of manufacture: 1999 International size designation: 160 C2 / 65 Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Main fuse: 160 A Ncedpfjytik Rsx Akyer Max. motor current: 30 A Machine weight: 3,200 kg Location: Freiburg

Condition: like new (used), functionality: fully functional, ABUS Monorail Hoist Type GM3063, almost as new Stored as reserve stock, likely overhauled or new, no documentation! Nearly new condition No wear on rope and rope guide, load hook/block, running wheels, control cabinet/control system, or control pendant Complete with travel carriage (2 travel motors Type GE 1200) Lifting capacity: 6.3 t Reeving: 4/1 Lifting speeds: 0.8 / 5 m/min Duty classification: 3 With two travel motors From a large spare parts stock of DEMAG / ABUS / STAHL, see also my other listings Ncodpfx Aov Uvdpekyor Info: Over 20,000 DEMAG spare parts in stock! Check out my other warehouse stock offers as well!

Condition: used, Year of construction: 2004, x-travel 800 mm y-travel 630 mm z-travel 710 mm Control Siemens type 840Dsl Number of spindles 2 St. turning speeds 30-12000 U/min tool taper HSK 63 Tool changer 80 Pos. Feed 1-40.000 mm/min NC rotary table (B-axis) 250 degrees, minimum indexing unit 0.001 degrees, NC rotary table (A-axis) 360 degrees, minimum indexing unit 0.001 degrees, Cooling system The tech. Data are manufacturer or operator information and therefore non- Ncjdoyqrx Sepfx Akyjr binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Nsdpfx Akjub S R Hsyecr Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- 37 cm height-47cm length-8cm Nsdpfx Aoqvuicskyscr

Condition: used, Year of construction: 2004, operating hours: 3,623 h, Equipment: all wheel drive, Equipment: * 3,623 operating hours * Deutz engine with 44 kW * 20 KM/H * Bucket * Forks * Additional work lights * Quick coupler * Tires: 12.5-20 Other information: Nsdpfxeyn Tt Ej Akyscr * 2 previous owners * German machine * Year of manufacture: 2004 * Total weight: 6,500 kg * Wheel loader, ready for immediate use In November 2009, at approx. 1,300 operating hours, a new tachometer unit was installed. Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special rates. If interested, we are happy to provide you with an individual quote! We welcome trade-ins of your commercial vehicle or construction machinery. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Please note: our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible by our external partners for an additional charge. The information provided in listings, online, on price tags, and in images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be verified separately if applicable. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1990, Machine located in Germany Ncodpfx Ajytpcaokyor

Condition: used, Format: 0x0 Equipment: Corner cutter Ncodjx Rh D Espfx Akysr

Condition: used, Year of construction: 1984, Intake diameter: 160 mm Ncsdpfx Aowm Nr Askyor Discharge diameter: 160 mm Flow rate: 2500 m³/h Motor power: 2.2 kW Weight: 50 kg

Year of construction: 2012, condition: like new (used), machine/vehicle number: W111, Steel crane track suspension crane circular track 3x250Kg chain hoist crane Ncedpfx Asi Ammyskyjr Ideal for car washes, electroplating, etc Circle dimensions 6x2.3m (curved HEB140 beams) + Power rails / power supply + 2x 12m substructure HEA 180 + wall brackets + 3x 250Kg chain hoists - electrically movable - trolley travel and lift (approx. 4m) Each chain hoist can be controlled independently of one another Crane is dismantled, packed and immediately available New condition Collection by appointment in 75053 Gondelsheim Forklift is available for loading Shipping by forwarding agency possible, please inquire with zip code