Used Vickers 1,1 Kw for sale (32,684)

Condition: used, Year of construction: 1995, used, good condition manufactured by Luftus Giedpfovwfbpox Almjt type LRM - WTS built in 1995 Masch.-No. 950071 for chips low speed ca. 1400 rpm motor 7,5 kW connection diameter 300 mm pressing pa. 2000 m³/h air capacity 6000 m³/h steel wheel required space ca. 1200 x 800 x 1200 mm weight ca. 250 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 2000, used, top condition, low hours Make: Schuko Model: TSK 250 CE Year of manufacture: 2000 Machine no.: Motor: 7.5 kW Connection diameter: 250 mm Pressure approx. 2725 m³/h Air flow rate: 4595 m³/h Steel impeller Belt drive Vibration dampers Space requirement approx. 1300 x 700 x 1300 mm Weight approx. 200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handed over in as-inspected condition, without warranty or guarantee. Giodpfsycxh Rex Almet

Condition: used, used, in good condition, low hours Manufacturer: Schuko Type: L 350 Machine no.: 0-90390 Slow runner, approx. 1400 rpm Motor: 11 kW Connection diameter: 350 mm Pressure approx. 2229 m³/h Airflow: 9640 m³/h Steel impeller Required space approx. 1100 x 800 x 1500 mm Gijdpsycxgysfx Almst Weight approx. 200 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: used, From the authority Shaft and motor with new bearings Used, good condition Make: Krämer Type: VKA-GR 1 Mach. No. 75/007 Motor: 5.0 kW Connection diameter: 300 mm Pressure per year: 2100 m³/h Air flow rate: 6750 m³/h Steel impeller Belt drive Storage location: 97447 Gerolzhofen, free on load, unpacked Gijdpowabiyefx Almjt Sold in the current condition, as seen without guarantee or warranty

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer Gjdoyut Dkjpfx Almoit CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Gedpfjytd Scjx Almjit Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 364 kW (494.90 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,100 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,450 mm, total height: 2,420 mm, warranty duration: 6 months, heating capacity: 160 kW (217.54 HP), Aircooled chiller/Heat pump YORK YCPB 420 364 kW/406 kW Cooling capacity: 364 kW / 103.5 tons (12/7 — 35°C) Heating capacity: 406 kW / 115.44 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss PSH105A4EPA (scroll) + 2 pcs. Danfoss PSH065A4EPA (scroll) Type of refrigerant: R454B Number of fans: 7 pcs. (Frequency inverter) Dimensions: 4.45x2.25x2.42 m. Weight: 3100 kg. Working hours: 107/80/98/58 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Godpey Rknmefx Almjit Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 520.6 kW (707.82 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,756 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,850 mm, total height: 2,400 mm, warranty duration: 6 months, Aircooled chiller YORK YLAA0517HE 520.6 KW Cooling capacity: 520.6 kW / 148.03 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 6 pcs. Bitzer GSD80385VAB462 (scroll) Type of refrigerant: R410А Number of fans: 8 pcs. Dimensions: 4.85x2.25x2.4 m. Weight: 3756 kg. Working hours: 3/2/3/2/2/3 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Giodpfxsy Rkh Tj Almst Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: like new (used), Year of construction: 2009, 🔥 FOR SALE: 2x Fröling Turbomat 500 kW Cascade System – Total Output 1000 kW 🔥 ✔ 2x Fröling Turbomat 500 kW ✔ Total output: 1000 kW ✔ Fully automatic woodchip heating system ✔ Lambda control + negative pressure regulation ✔ Moving grate feed ✔ Automatic cleaning and de-ashing ✔ 4-pass heat exchanger with automatic WOS cleaning system ✔ Integrated multi-cyclone dust separator ✔ Water-cooled feed channel ✔ Heavy-duty industrial design Suitable for: - Woodchips - Pellets - Sawdust - Biomass fuels 📦 Included in the price: - 2x boilers - 2x screw conveyors - 2x pumps - 2x return flow mixing valves - 2x control panels / controllers - Return flow lift up to shut-off valve - Ash screw conveyors ❌ Not included: - Moving floor discharge - Ash container 🔧 Dismantling: - 16.06 – 17.06.2026 - Dismantling included in the price - Crane loading directly via roof opening Godpfoy Rfa Rox Almeit 🚛 Loading: - 18.06.2026 - Crane firmly booked from 07:00 – 10:00 - Transport and truck logistics to be organised by the buyer ⚠ The buyer's truck must be on site before crane works begin. Additional crane hours due to delayed truck arrival must be paid directly by the buyer on site. Márton Pauker Top Heating Systems BEN & JAK KFT 📞 🌐

Condition: good (used), power: 95 kW (129.16 HP), fuel type: diesel, first registration: 01/2009, Year of construction: 2009, operating hours: 10,899 h, = Additional Options and Accessories = - Central lubrication = Notes = Liebherr A900C - 95 kW - Central lubrication - Year of manufacture: 2009 WLHZ1002TZK046186 Operating hours: 10,899 95 kW engine Central lubrication = Further Information = Model year: 2009 Drive: Wheeled Gross vehicle weight: 18,000 kg Gsdpfjydnvgex Almeit Technical condition: good Visual condition: good

Condition: good (used), power: 95 kW (129.16 HP), fuel type: diesel, color: yellow, first registration: 01/2009, Year of construction: 2009, operating hours: 10,839 h, Liebherr A900C - 95 kW - Central Lubrication - Year of Manufacture: 2009 WLHZ1002VZK046325 Hours: 10,839 95 kW Engine Central Lubrication System = Further Information = Model year: 2009 Drive: Wheeled Gross weight: 18,000 kg Technical condition: Good Optical condition: Good Contact VAEX The Truck Traders for further information. Gedpfx Alsydnvmemoit

Condition: used, Year of construction: 2015, operating hours: 12,990 h, * Hitachi ZX290LCN-5B * Year of manufacture: 2015 * 12,990 operating hours Gijdpfx Aljy Nkbdjmjt * 140 kW Isuzu engine * 30,000 kg * MS21 hydraulic quick coupler * All hydraulic lines * 3 m undercarriage width * Camera

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Godpjvf E Avefx Almeit Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Gjdpfx Alev Hr Nxjmoit

Condition: used, functionality: fully functional, power: 7.5 kW (10.20 HP), protection type (IP code): IP54, VEM KPER 132 SX2 7.5 kW functionally tested Gisdex H N Dljpfx Almot

Condition: ready for operation (used), Foot-mounted motor RÜETSCHI Switzerland 54 kW / 60 Hz / 3552 rpm Gjdpfeq H Rvvjx Almsit Shaft 65 x 150 mm Weight 375 kg

Condition: used, mileage: 10 km, power: 88 kW (119.65 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,500 mm, first registration: 08/2024, color: silver, number of seats: 3, Year of construction: 2024, Equipment: air conditioning, airbag, central locking, onboard computer, parking sensors, = Additional options and accessories = Godovlxxdepfx Almeit - Advanced Emengency Braking System - Alloy wheels - Apple CarPlay - DAB + Receiver - Driver airbag - Electric mirrors - Electric windows - Panelled loading space - Partition wall without glass - Passenger airbag - Rear parking sensors - Rear view camera - Remote central locking = More information = General information Number of doors: 3 Registration number: V-26-GZL Serial number: VF6T82E0X72579824 Technical information Max. front axle load: 1625 kg Max. rear axle load: 1650 kg Battery: 52 kWh Battery charging power: 2 kW Measures length/height: L2H1 Dimensions (LxW): 548 x 196 cm Weights Empty weight: 1.860 kg Carrying capacity: 1.210 kg GVW: 3.070 kg Max. towing weight: 3.990 kg Maintenance APK (MOT): tested until 08/2028

Condition: ready for operation (used), RINGLER Industrial Vacuum Cleaner Type: AT-D 4.0 kW Device No.: 96231 Year of manufacture: 1989 Equipment: - Suction hose - Chassis - Documentation Gijdpfexc Eq Rsx Almet

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,245 kg, rotational speed (min.): 560 rpm, total height: 1,830 mm, total length: 1,760 mm, total width: 1,370 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. The new, efficient mills of the RG-36E - (EKO) series with a very good price/quality ratio are mainly used for grinding various types of soft and hard material. The optional system of receiving the milling based on a blower and separating cyclone, provides comfortable and safe operation for the operator. The mills in this series are characterized by their compact, compact design and ease of operation. Each RG type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted against each other as they wear. Motor overload protection and safe control voltage as standard. Rotor diameter (mm): 480 Rotor width (mm): 800 Power (kW): 22 kw Knives on rotor (pcs): 6 Fixed knives (pcs): 4 Weight (kg): 1245 P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock) Gsdpfx Aljrdgkcjmsit

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 3,650 kg, rotor diameter: 400 mm, number of blades: 39, total length: 2,800 mm, total height: 2,080 mm, total width: 1,800 mm, rotor length: 800 mm, type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 40 mm, warranty duration: 12 months, GENOX V800 We are a company with more than 30 years of experience in trading machines for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Feed size : 1500 x 1430 mm Drive motor power : 37 kW Knives on rotor : 35 + 4 Fixed knives : 4 Weight : 3650 kg Giedpfxora A S Te Almet In the offer , we constantly have dozens of crushers , mills , injection mills , etc. We are a reliable contractor, thousands of customers have already trusted us. Vision single-shaft crushers are small and medium-sized machines suitable for processing a wide range of materials. These products can often be sold as a destination such as alternative fuel. It also happens that crushers are the first of the equipment working in a specialized processing line. Capacity usually varies between 300 - 5000 kg/h + depending on the model, type of material and application. Unused machine available off-the-shelf, possible tests before purchase. If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 2,870 kg, rotational speed (min.): 560 rpm, total height: 2,880 mm, total length: 2,890 mm, total width: 1,610 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. New, efficient mills of RG-56E - (EKO) series with a very good price/quality ratio are mainly used for grinding various types of soft and hard material. The optional system of receiving the milling based on a blower and separating cyclone, provides comfortable and safe operation for the operator. The mills in this series are characterized by their compact, compact design and ease of operation. Each RG-type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted against each other as they wear. Motor overload protection and safe control voltage as standard. P&F Wartacz was founded in 1990, and today we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 560 Width of rotor (mm): 800 Power (kW): 30kw Knives on rotor (pcs): 10 Fixed knives (pcs): 4 Weight (kg): 2870 Possible purchase with extraction and cyclone instead of drawer Giedpfsrbgy Ejx Almst Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 18,000 kg, rotor diameter: 650 mm, number of blades: 115, total length: 3,920 mm, total height: 2,720 mm, total width: 4,500 mm, rotor length: 1,790 mm, type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 40 mm, warranty duration: 12 months, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Feeder dimensions : 2380 x 2580 mm Gisdpforbiflex Almet Drive motor power : 2x90 kW Knives on rotor : 109 + 6 Fixed knives : 4 + 4 Weight : 18000 kg Behemoth single-shaft crushers are designed to shred various types of unprocessed waste to gain a large or medium fraction. These shredders are ideal for particularly tough and bulky products. Many years of experience in the recycling industry and the technical solutions used ensure that the highest operating efficiency is achieved. The efficient and wear-resistant system is prepared to work in harsh recycling conditions. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Unused machine available on hand, possible tests before purchase. (dozens of machines in stock) If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 14,800 kg, rotor diameter: 480 mm, number of blades: 101, total length: 3,710 mm, total height: 2,530 mm, total width: 4,150 mm, rotor length: 2,000 mm, type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 40 mm, warranty duration: 12 months, We are a company with over 30 years of experience in the trade of machines for the plastics industry. We have the offered machines in stock and we can carry out tests on them on your material. Hopper dimensions: 2380 x 2580 mm Drive motor power: 2x90 kW Rotor knives: 109 + 6 Fixed knives: 4 + 4 Gedpfx Aevtmiajlmjit Weight: 18000 kg Behemoth single-shaft crushers have been designed to crush various types of unprocessed waste to obtain a large or medium fraction. These shredders are ideal for particularly hard and large products. Many years of experience in the recycling industry and the applied technical solutions ensure the highest operational efficiency. The efficient and wear-resistant system is prepared to work in difficult recycling conditions. P&F Wartacz was founded in 1990 and we are currently the oldest trading company in the PTSz industry, continuously selling injection molding machines, mills, crushers, coolers, conveyors, peripheral equipment and spare parts. Unused machine available immediately, tests before purchase possible. (dozens of machines in stock) If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 6,500 kg, total height: 3,700 mm, total length: 2,510 mm, total width: 2,060 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 820 Rotor width (mm): 1050 Power (kW): 75 kw Knives on rotor (pcs): 33 Fixed knives (pcs): 6 Weight (kg): 6500 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. Giodpforbh U Asx Almst (dozens of machines in stock)

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 400 mm, number of blades: 27, total length: 1,820 mm, total height: 1,730 mm, total width: 1,300 mm, rotor length: 800 mm, type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 40 mm, warranty duration: 12 months, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Gsdpsrdgmusfx Almjit Feeder dimensions : 1200 x 1090 mm Drive motor power : 18 kW Knives on rotor : 23 + 4 Fixed knives : 4 Weight : 1750 kg In the offer , we constantly have dozens of crushers , mills , injection mills , etc. We are a reliable contractor, thousands of customers have already trusted us. Vision single-shaft crushers are small and medium-sized machines suitable for processing a wide range of materials. These products can often be sold as a destination such as alternative fuel. It also happens that crushers are the first of the equipment working in a specialized processing line. Capacity usually varies between 300 - 5000 kg/h + depending on the model, type of material and application. Unused machine available off-the-shelf, possible tests before purchase. If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.