Used Visser-Bolsward Kb for sale (625)

Condition: good (used), Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Lenze, adjustable geared motor with brake -Adjustment gear: 11.432.10.08.1 54 - 11 rpm -Brake: 14.448.08.1.0.8 8 Nm -Motor: Type B7KB4-044H 0.25 kW / 1390 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Number: 2x geared motors available -Price: per piece -Dimensions: 410/280/H200 mm -Weight: 16.7 kg/pc. Iiodpfottimbox Amgeh

Condition: ready for operation (used), To suit a MM 227/6 insert line- Price £5,000   IN STOCK Iodpfxsq U Trdj Amgoih

Condition: used, mileage: 757,305 km, power: 265 kW (360.30 HP), first registration: 03/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Special equipment: Work lights, aluminum air reservoir, driving assistance system: Attention Assist (drowsiness detection sensor), suspension: front springs 7.5 t, single leaf, tinted windshield with sun band, 10.4 cm info display with additional indicator, integrated rear end, communication interface, fuel tank: 290 liters aluminum, alloy rims 9.00x22.5 (ALCOA Dura-Bright), reinforced engine brake, PTO MB 131-2c, programmable special module, chassis lowering without residual air pressure control, tire pressure monitoring system, retarder, acoustic reverse warning (external warning signal), low-maintenance fifth wheel coupling, additional 24V socket in passenger footwell, preparation/switch for lift axle on trailer/semi-trailer, preparation for revolving beacon, transmission oil cooler Iodpeuh Ndwsfx Amgjih Further equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, trailer socket 24V / 15-pin, Antos, audio system: radio with USB port, exhaust to right exterior, exterior mirrors electrically adjustable and heated, 170 Ah battery, rear axle differential lock, medium size air pressure unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane keeping assist, cab: width 2.30 m, cab: hydraulic tilting equipment, cab: S ClassicSpace, cab: steel sprung, standard, cab: reinforced (Sweden), cab floor with 320 mm engine tunnel, suspension: leaf/air, suspension: front spring support aluminum, electric window lifts, generator 100 A, 12-speed transmission - type: G 211-12, urea tank (AdBlue): 60 l, manual tilting steel roof, rear axle crown wheel 440, body/superstructure: tractor unit, comfort central locking, 3-piece mudguards, unregulated power steering pump, front air intake, engine 10.7 l - 265 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3,700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat cover/upholstery: fabric, cab seats: passenger functional seat, cab seats: standard driver’s suspension seat, front splash protection, front axle stabilizer, cab socket 24V, tachograph / EC control device, aerodynamically shaped underbody paneling, front underrun protection, preparation for toll collection, cranked front axle, regulated water pump, gross vehicle weight permitted: 18.00 t * VIN: WDB96340310042344 * First registration: 30.03.2016 * Net price Tel./WhatsApp:

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg Ijdpfxou R Szao Amgjih The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Year of construction: 2008, condition: used, For sale is the Vc999 type thermoforming packaging machine shown in the picture. The machine was manufactured in 2008, made in the USA. 12KW. KB 6 meters long. Film width 420mm. Universal closing tool that can handle 1/1, 1/2, and 1/4 formats. The machine now has 1/4, and the 1/2 tool is also included. Vacuum with protective gas. We packed the 400g pinsa with the 1/2 tool. Iijdext N Etepfx Amgsh But we packed XXL hamburgers and hotdogs. 2 Busch vacuum pumps. The forming pump is next to the machine, the package vacuum pump is placed in the machine house. The machine was renovated in 2025. The clip chain was replaced, which was about 8000 eur. All pneumatic cylinders and valves and sensors are Replaced refurbished. Everything works well. Can be tested in Hungary, (8000, Székesfehérvár) The price is without tax and without shipping.

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Iisdpfx Aezzxk Ujmgoh Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: used, mileage: 281,782 km, power: 213 kW (289.60 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, color: yellow, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, loading space length: 5,200 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, * Sun visor * ABS * ASR * ESP * Radio * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Sunroof * Driver's air suspension seat * Air intake at the top * Trailer coupling * 2-line air connection * Duomatik air connection * 12-speed * Suspension: leaf spring/air * Payload: 7895 * Continuous brake: engine brake Iedpfx Amoz Dlu Negjih ----Special body: Crane: Palfinger PK 13001-KB (Power Link Plus), maximum lifting capacity 5.46t, foldable, operator's platform, 3-way hydraulic extension, fully hydraulic outriggers, engine start/stop, 6th + 7th control circuit for rotary servo and grapple operation. Read load chart: lifts 3.7m-3.3t, 5.3m-2.25t, 7.2m-1.6t, 9.2m-1.22t.----Body: Logemann construction material tipper body, raised front wall, stone floor, 2-part sideboards left + right with damper relief, folding center divider, Kinnegrip fasteners. Sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. The basis of all purchase contracts, invoices, proforma invoices, orders, sales negotiations are our general terms and conditions (see imprint for details).

Condition: used, mileage: 324,956 km, power: 213 kW (289.60 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, loading space length: 5,200 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, * Sun visor * ABS * ASR * ESP * Radio * Rear view camera * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating Iiedpfx Ajz Dlvmjmgjh * Sunroof * Driver's air suspension seat * Air intake at the top * Trailer coupling * 2-line air connection * Duomatik air connection * 12-speed * Suspension: leaf spring/air * Payload: 7895 * Continuous brake: engine brake ----Special body: Crane: Palfinger PK 13001-KB (Power Link Plus), maximum lifting capacity 5.46t, foldable, elevated platform, 3-fold hydraulic extension, fully hydraulic outriggers, engine start/stop, 6th + 7th control circuit for rotary servo and grapple operation. Read load chart: lifts 3.7m - 3.3t, 5.3m - 2.25t, 7.2m - 1.6t, 9.2m - 1.22t.----Body: Logemann construction materials tipper body, front wall raised, stone floor, 2-part side panels left + right with damper relief, foldable center section, Kinnegrip fasteners.----Very well-maintained TGM, already with facelift, German vehicle, 1 owner, technically and visually ready for immediate use. For sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 32,110 h, functionality: fully functional, machine/vehicle number: 027.0500, workpiece weight (max.): 80 kg, total width: 2,200 mm, total length: 2,700 mm, total height: 1,800 mm, distance between centers: 600 mm, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 600 mm, input frequency: 50 Hz, input voltage: 380 V, space requirement height: 170 mm, tailstock quill stroke: 70 mm, Equipment: CE marking, Universal CNC Grinding Machine for Sale - Type: STUDER S33, Series 75 - Year of manufacture: 2008 TECHNICAL SPECIFICATIONS: - Table tilt: +8.5° - X-axis travel: 285 mm - B-axis travel: 800 mm - Grinding angle adjustment: -15° to +195° (1° increments) - Grinding wheel: 500x63 mm, 50 m/s Iodsz Iybfopfx Amgeih - Distance between centers: 600 mm (max. load 80 kg) - Collets: B32 - Tailstock quill travel: 63 mm - Tailstock fine adjustment: 0.04 mm - Control unit: FANUC 21-TB, 10.4" - Memory: 64 KB - Coolant tank: 375 L with automatic paper filter feed ADDITIONAL EQUIPMENT: - Steady rest: ARBOTECH – GR – 055V - MARPOSS device: UNIMAR S30 - MARPOSS device: P4 - Grinding wheel balancing system: MPM The S33 grinding machine is equipped with a MARPOSS device for fast and precise workpiece measurement, an ARBOTECH auxiliary device for grinding workpieces in a single setup, and a grinding wheel balancing system. The machine has undergone regular annual servicing by the manufacturer, STUDER. It is highly precise and in excellent condition. It was used for toolmaking production runs of up to 50 pieces. It is connected to the power supply and ready for operation.

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Stator: 1MS 310 D-6B-A1/SO20 Pn 19 kW P kb 27 kW n N 700 rpm n max 6000 rpm Iedpfx Aov U Ag Djmgoih Condition: Used, fully functional 2 units available in stock.

Year of construction: 2023, condition: ready for operation (used), A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible. Ijdpeyrta Hofx Amgoih

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions Ijdpsyak Ansfx Amgeih

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 8,158 h, load capacity: 5,000 kg, lifting height: 4,130 mm, free lift: 2,111 mm, fuel type: diesel, mast type: duplex, construction height: 2,890 mm, fork length: 1,300 mm, drive type: Diesel, Diesel forklift Mast type: Duplex Condition: Ready for operation and fully functional Iiodpfxjzcrz De Amgoh Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Side shifter, integrated 3rd valve

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 6,151 h, load capacity: 4,000 kg, lifting height: 4,295 mm, fuel type: gas, mast type: simplex, construction height: 2,730 mm, fork length: 2,000 mm, drive type: Treibgas, LPG forklift Iijdpfsxrhkrex Amgsh Mast type: Standard Transmission: Torque converter Condition: Ready for use and fully functional Technical condition: normal Sideshift, 3rd valve,

Condition: used, Year of construction: 2022, total length: 2,000 mm, lifting height: 5,700 mm, load capacity: 1,600 kg, · Bedienung Geh/Stand · Nenntragfähigkeit 1600 (2000)kg · Lastschwerpunktabstand 600 mm · Lastabstand 724/646 mm · Achslast mit Last antriebsseitig/lastseitig 979/1850 kg · Achslast ohne Last antriebsseitig/lastseitig 962/268 kg · Bereifung Polyurethan · Reifengröße antriebsseitig mm ⌀ 230 x 90 · Reifengröße lastseitig mm ⌀ 85 x 85 (⌀ 85 x 60) · Stützrollengröße mm ⌀ 150 x 50 · Spurweite antriebsseitig/lastseitig 534// 380/500 mm · Höhe Deichselgriff in Fahrstellung min./max. 1175/1380 · mm · Gabelhöhe gesenkt mm 86 · Arbeitsgangbreite bei Palette 800 x 1200 längs 2390 / · 2777 mm · Wenderadius 1507/1894 mm · Fahrgeschwindigkeit mit/ohne Last km/h 4,0/4,0 6,0/6,0 8,0/10,0 · Hubgeschwindigkeit mit/ohne Last m/s 0,15/0,30 · Senkgeschwindigkeit mit/ohne Last m/s 0,40/0,35 · Max. Steigfähigkeit kB 5 mit/ohne Last %: 10,0/22,0 · Betriebsbremse Elektromagnetisch · Fahrmotor, Leistung S2 = 60 min kW 2,3 · Hubmotor, Leistung bei S3 = 15 % kW 3,2 · Batterie nach DIN 43531/35/36 A, B, C, nein 2PzS · Batteriespannung/Nennkapazität K V/Ah 24/230 Ijdsxtq E Iepfx Amgoih · Li-Ion: 24/205 · Batteriegewicht ±5 % (herstellerabhängig) kg 212 · Energieverbrauch nach DIN EN 16796 kWh/h 0,84 · Art der Fahrsteuerung AC-Steuerung · Schalldruckpegel (Fahrerohr) dB(A) ≤66

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 126375/99-274723, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 31.12.2025! The offer includes: Stahl Zi52/4-Fi52 (year of manufacture: 1999; serial number: 126375/99-274723) Stahl KBK 52 (year of manufacture: 1999, serial number: 121492/99-271702) The folding rollers of the machine have been replaced. The machine is manually adjustable. Isdpoxyfmasfx Amgjih

Condition: used, Tennant 5680 Walk-Behind Floor Scrubber – Key Specifications a Tennant 5680 battery-powered walk-behind floor scrubber, ideal for commercial and industrial cleaning applications. This model is known for its durability, reliability and excellent cleaning performance — perfect for warehouses, manufacturing floors, supermarkets, healthcare facilities and contract cleaning operations. - Model: Tennant 5680 (battery-powered walk-behind scrubber) - Solution tank: 30 gallons / 114 L - Recovery tank: 40 gallons / 151 L - Brush motors: (2) 0.75 hp (0.5 kW) - Brush speeds: - • Disc: 200 rpm - • Cylindrical: 750 rpm - Vacuum motor: 0.8 hp, 3-stage - Battery system: 36 V (Standard ≈ 240 Ah) - Machine weight (with batteries): ~805 lb / 365 kg - Noise level: ~75 dBA - Estimated cleaning coverage: up to ~30,600 ft²/h (≈ 2,845 m²/h) depending on path & technology used Condition - Machine is in excellent working condition - Fully tested and ready for immediate use - Batteries and scrub heads in operational condition (specify if new/serviced if applicable) Contact us for pricing, additional pictures, video demonstration, or to schedule a viewing. Worldwide delivery available. keywords: Tennant 5680 floor scrubber, walk-behind scrubber, battery floor scrubber, industrial floor cleaning machine, used Tennant 5680 for sale Ijdpex Szwbjfx Amgjih

Condition: new, Volvo L220H Rock Bucket Edge Length: 3400mm Iedpfx Amex Ta Rvegeih Capacity: 5.6m3 Welded adapter-teeth For detailed information please contact us

Condition: good (used), functionality: fully functional, saw band length: 1,750 mm, saw band width: 16 mm, Bone Saw Mado MKB 649 16A, 380V. Workshop inspected, defects rectified. Motor brake. New saw band. Iijdpfx Aoya H U Tomgeh Inspection and test run possible! Additional machines available. Cash or advance payment! Sale to businesses only. No warranty or guarantee.

Condition: used, maximum load weight: 24,300 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 10/2007, Year of construction: 2007, Equipment: ABS, Manufacturer HMK Bilcon Model TS2 33.000 l. ADR Year 2007 Condition Good Serial Number UH9TS2BAA7HB1332 Ref. nr. 8093 Reg. date: 22-10-2007 Drum brake: ? ABS: ? Rear axles: BPW Tire Size: 265/70R19,5 Cover% left 40 - 40% Iodpfx Ajynq Dhemgoih Suspension: Air Toolbox: ? Total weight: 31000 kg. Net weight: 6700 kg. Load capacity 24300 kg. Tank: 33.000 l. Compartment: 5 (9000+4500+6000+6000+7500)

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: FI127/3, 1 Demag KBK I wall-mounted slewing jib crane, 125 kg load capacity Jib length 4m, load capacity 125 kg Equipped with Abus GM chain hoist, load capacity 125 kg Weight including wall bracket approx. 200 kg Complete with chain hoist, cable trolley, travel carriage, and small parts Slewing range 270° Item location: 75053 Gondelsheim System is fully dismantled and immediately available Iisdpfx Aeynv Hhomgsh Shipping via freight carrier or collection Shipping costs upon request, depending on postal code

Condition: used, Year of construction: 2023, load capacity: 2,500 kg, lifting height: 6,120 mm, fork length: 1,200 mm, total length: 3,650 mm, - Geräteart Elektro - Bedienung Sitz - Lastschwerpunkt 500 mm - Lastabstand 420 mm - Achslast vorne mit Last kg 6335 - Achslast hinten mit Last kg 816 - Achslast vorne ohne Last kg 2393 - Achslast hinten ohne Last kg 2258 - Bereifung Superelastik - Spur vorne mm 992 - Spur hinten mm 900 Iedpfxeyt Skye Amgsih - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 9 - Sitzhöhe/Standhöhe (SRP) mm 1139 - Kupplunghöhe mm 485/365 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3654 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 3852 - Wenderadius mm 2032 - kleinster Drehpunkt mm 539 - Fahrgeschwindigkeit mit Last km/h 19 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit mit Last m/s 0,46 - Hubgeschwindigkeit ohne Last m/s 0,55 - Senkgeschwindigkeit mit Last m/s 0,52 - Senkgeschwindigkeit ohne Last m/s 0,45 - Zugkraft mit Last N 8000 - Zugkraft ohne Last N 8110 - Max. Zugkraft mit Last N 17440 - Max. Zugkraft ohne Last N 17220 - Steigfähigkeit mit Last % 21,3 - Steigfähigkeit ohne Last % 29,5 - Max. Steigfähigkeit mit Last % 25,5 - Max. Steigfähigkeit ohne Last % 29,7 - Beschleunigungszeit mit Last s 4,5 - Beschleunigungszeit ohne Last s 4,2 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Hubmotor, Leistung bei 15 % ED kW 16,3 - Batteriespannung V 80 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Iodpfsywztajx Amgjih Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Including tools

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Technical Data Diameter: 1250 mm Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Iiedpfsyw Hxnox Amgsh Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts.

Condition: used, Year of construction: 2018, functionality: fully functional, power: 5.7 kW (7.75 HP), rotational speed (max.): 1,415 rpm, Demag motor/gearbox KBA125 B-4 / AF18 i = 181 ED = 100% 5.7 kW 1415 rpm Motor condition: Refurbished Price on request Iisdpfjywkwzox Amgoh