Used Vulcanization Presses for sale (12,217)

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control Nsdew Nafkjpfx Ag Dola - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 6 t, stroke length: 80 mm, throat depth: 500 mm, total length: 780 mm, total width: 610 mm, total height: 1,700 mm, working height: 1,033 mm, Equipment: documentation/manual, STANDARD DESCRIPTION: HIDROGARNE hydraulic inserters are designed for insertion and clinching operations, offering robustness, precision, and reliability. These machines are compact, with a small footprint, and completely hydraulic, ensuring accurate insertion at any point along the punch stroke. They are capable of clinching work on thicknesses from 1 to 6 mm and inserting any type of insert in materials such as copper, aluminum, carbon steel, and stainless steel. • 6 tons • 3 kW • Adjustable stroke from 0–80 mm • Throat depth: 500 mm • Working height: 1,090 mm • Total width (front): 610 mm • Total width (side): 780 mm • Overall height: 1,800 mm • Weight: 550 kg The analog hydraulic inserters are designed for standard production applications and repetitive tasks, where ease of use and reliability are prioritized. They feature a dual integrated safety system, operation via dual electric safety foot pedal, manual pressure adjustment, and return stroke adjustment for the punch—allowing for quick and effective setup of the insertion process. Nodpfx Ajy Efb Dsg Dsla OPTIONS: • Automatic insert feeding system (NC models) • Four-station turret system with automatic working position detection (NC models) • High-efficiency inverter system (start-stop) • Laser pointer

Condition: used, Punching force: 1000 kN Throat depth: 760 mm Nledpfjy Exdrox Ag Dea Stroke release via foot switch

Condition: used, Year of construction: 1999, functionality: fully functional, - Year of manufacture: 1999 Njdsy E S Svjpfx Ag Dsla - Min.-max. carcass dimensions: Length = 300–2500 mm / Height = 250–1250 mm - Insertion depth (press width) = 600 mm - 4x top press beams - 3x side press beams - Each press beam can be switched off individually as required - Electric adjustment + rapid traverse for horizontal and vertical carrier - Infinitely adjustable pressing pressure for horizontal and vertical force - Timer function: After the set time expires, the press opens automatically - Belt transport for entry and exit of carcasses, control via foot pedal - Everything fully functional - Demonstration and inspection on site are of course possible

Condition: used, Press pressure max 104 t working length 3.090 mm Working width 4 x 240 mm Solid hydraulic molding or beam press Wemhöner type VS 4 S for veneering moldings, gluing wood or other pressing tasks. The press has four independently controllable pressing surfaces. Nlodpfjy Emwaox Ag Dsa Including dismantling and loading. Fixed loading date: 15.06.2026. Glue spreader also available.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Press force 400 t Bending length 4050 mm Distance between uprights 3550 mm Control unit: CYBELEC ModEva 10 S Total power requirement 47 kW Machine weight approx. 30,400 kg Space requirements approx. 6000x3000x3450 mm Nledpfx Aoy Ew E Ijg Dea Accessories/Equipment: - 2 bending aids in front of the machine - 2 backgauge fingers - Light curtain in front of the machine - CYBELEC ModEva 10 S control - Parking spot on the right for bending aid - Die shifting - Tool holder - Crowning - Pneumatic tool shifting - Foot switch - Side safety doors - Controlled axes: Y1 - Y2 - R - Z1 - Z2

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Press force: 85 t Bending length: 2750 mm Upright width: 2260 mm Total power requirement: 17 kW Machine weight approx.: 8,300 kg Space requirements approx.: 3800 x 2300 x 2400 mm Nlodpfjyvhzujx Ag Dea Accessories/Equipment: - 2 support arms in front of the machine - 2 backgauge fingers - Light barrier in front of the machine - Safety guard at the sides and rear of the machine - Die shift - 6-axis backgauge - Trumpf TASC 6000 control - Wila tool holder - Operating hours: 75,000 h

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 05/2027, type of input current: three-phase, year of last overhaul: 2026, Record Roll Press Semi-Automatic for consistent quality! Dividing head NEWLY redesigned Stainless steel knives NEW simple, robust engineering! with 3 forming plates only from us: DGUV V3 tested Connection: 400V, 16A-CEE plug Nljdjy Ebkbopfx Ag Doa Dimensions: 520 x 500 x 1200 mm (WxDxH) Refurbished used machine, SAB inspected with warranty & spare parts service Visit our large showroom!

Condition: good (used), Year of construction: 1987, Press force 1250 t Nlodpfxjy Enfrs Ag Dsa Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Nodpfx Agjy Emwmj Dela Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), Year of construction: 1975, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, ram plate width: 500 mm, ram plate length: 630 mm, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Nlsdpfjy Emv Aox Ag Dea Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1994, Pressure: 250 t Nledpfjy Emvpjx Ag Doa Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 2011, Pressure 160 t Total power requirement 18.5 kW Machine weight approx. 13.5 t Njdpfx Agsy Emvce Dola

Condition: new, Year of construction: 2026, machine/vehicle number: H4-400_1, functionality: fully functional, power: 30 kW (40.79 HP), pressing force: 400 t, stroke length: 300 mm, operating speed: 100 mm/s, reverse speed: 80 mm/s, table width: 4,100 mm, throat depth: 400 mm, clearance between the columns: 3,600 mm, oil tank capacity: 180 l, total length: 6,150 mm, total width: 2,700 mm, total height: 3,400 mm, overall weight: 23 kg, Equipment: CE marking, documentation/manual, safety light barrier, Cone H4-400 Hydraulic Press Brake - DA-66S CoastOne - Finland Technical Specifications Cone H4-400: Bending force: 400 tons Bending length: 4100 mm Cylinder spacing: 3600 mm Stroke: 300 mm Width: 500 mm Nledpey Efczsfx Ag Dea Throat depth: 400 mm Table height: 985 mm Length: 6150 mm Width: 2700 mm Height: 3400 mm Approach speed: 100 mm/s Return speed: 80 mm/s Bending speed: 10 mm/s Oil tank: 400 l Weight: 22.5 tons Main motor: 30 kW Standard Equipment: - CNC-controlled X, R, Z1, and Z2 axes - 2 backgauge fingers - Delem DA-66S Graphical Control - CNC-controlled crowning device type 1 - AMADA Promecam tool holder - LazerSafe LZ2 front safety laser + PLC + rear light curtain - Standard punch and 4V die - Integrated LED lighting on the ram as front lighting Delem DA-66S Graphical Control: - 24-inch high-resolution touchscreen - 2D graphical programming interface - 3D machine visualization in simulation and production - Supports 3- to 8-axis control - Includes offline programming software Profile-T Lite – T2D - USB and peripheral interfaces - User-specific application support in the control's multitasking environment - Interface for sensor bending and automatic angle correction

Condition: good (used), lathe pressing tool, roller block, support roller -Support roller: solid design -Roller: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm -Quantity: 1x roller stand available Nledowvfwgopfx Ag Dja -Dimensions: 350/145/85 mm -Weight: 8.4 kg/pc.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Nlodpfx Ajyzy D Esg Dsa Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: used, Pellet press Nljdpoy E Rrbefx Ag Dsa Manufacturer: CPM Model: 7930-4 Year: 2019 Complete with feed mixers

Condition: used, Year of construction: 2010, Press brake Amada Astro HDS 1030/NTR, year of manufacture 2010 Nodpfxsy Em Ule Ag Dela

Condition: used, Year of construction: 1999, Press force 250 tons, currently disconnected and ready for transport, table 1.5 x 1 m, in good condition. Nedpfx Agewvbilj Dela

Condition: good (used), Year of construction: 1964, Press force: 6 t Adjustable stroke: 8 - 50 mm Ram adjustment: 25 mm Weight: approx. 500 kg Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Machine Tools Nlodey D Abfspfx Ag Dja Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Manufacturer: Struers Model: LaboPress-3 Machine type: Mounting Press Description For sale is a Struers LaboPress-3 mounting press for metallographic sample preparation. This device is used to produce embedded samples that are subsequently ground and polished. The machine operates fully automatically with adjustable pressing force, heating, and cooling times, ensuring reproducible and high-quality sample mounting. Thanks to the integrated heating and water-assisted cooling process, the unit is ideally suited for use in laboratories, materials testing, and quality assurance. Application areas - Metallography Nodpfx Agsy Dthio Dela - Materials testing - Quality assurance - Research & development - Failure analysis Functions - Embedding of samples under pressure and temperature - Adjustable pressing force - Variable heating and cooling times - Temperature settings: 150°C and 180°C - Water cooling (tap water or recirculating system) Technical Data Supply voltage: 220–240 V / 50 Hz Current consumption: approx. 4.5 – 5.0 A Fuse rating: 20 A Total power consumption: max. 1500 W Mounting unit power: 750 W Pressing force: 0 – 50 kN (adjustable) Heating temperature: 150°C / 180°C Heating time: 0 – 15 min Cooling time: 0 – 15 min Water supply: tap water or recirculating cooling Water pressure: 1 – 10 bar Water connection: 1/2" or 3/4" Mounting diameter (optional): 25 / 30 / 40 / 50 mm Version: 40 mm Dimensions (approx.): 420 x 580 x 420 mm Weight (approx.): 38 kg Condition - Used - Fully functional - Normal signs of use (see photos) Scope of delivery - Struers LaboPress-3 - 40 mm mounting closure - Accessories as shown in the photos Additional Information - Inspection available by appointment - Loading and shipping by freight company possible

Condition: used, Year of construction: 1979, pressure 1000 t distance between columns 3030 mm stroke 350 mm Distance table/ram, max. stroke up, adjustment up 1400 mm table surface area 3000 x 2000 mm table height over floor 430 mm side window 1450 x 1400 mm ram surface 3000 x 2000 mm speed down 300 mm/s speed up 340 mm/s working speed 18 - 44 mm/s return capacity 120 t oil volume 4400 l width with platform 4950 mm power capacity 2 x 90,0 + 10,0 kW weight 87,0 t Dimensions (WxDxH) 4,35 x 3,65 x 7,55 m height over floor 6,05 m height beneath floor 1,5 m SPECIAL DEAL as is where is Nlsdpfxsvuk I Aj Ag Dsa WITHOUT putting into operation / WITHOUT additional work stored in partly dismantled condition free loaded to truck

Condition: like new (used), Chamber filter press from Netzsch. 20 plates 40x40 cm. Condition: excellent. Njdpsxn Azdefx Ag Dela

Condition: used, Year of construction: 2019, product width (max.): 530 mm, roll diameter: 1,000 mm, We offer this used OMET X6 530 flexographic printing press, year of construction 2019. Manufacturer: OMET S.r.l. Model: X6 530 Serial Number: 2188 Year of Construction: 2019 Nledpfxoyfh Aie Ag Dea Machine Type: web press If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1990, operating hours: 7,248 h, total length: 3,000 mm, total width: 1,400 mm, total height: 2,200 mm, Weight: 3.450 kg - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: ITPS 050 20 P00356 - Operating hours: 7248 - Drive system: CNC - Power [kW]: 6.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 50 - Max. working width [mm]: 2000 - Column gap [mm]: 1730 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 105 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3000mm x 1400mm x 2200mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nsdpjy Dcpvefx Ag Djla Lukas van Rossum