Used Walther Trowal Cve 125 for sale (3,886)

Year of construction: 2010, condition: excellent (used), Here, we offer a Heraeus Vötsch temperature testing chamber. Vötsch temperature testing chamber, test cabinet VLM 3068/S, air-cooled (top-loading test chambers for construction materials) Control panel The control panel is mounted on a console on the temperature testing chamber. All control and operating commands can be initiated by simply touching the function symbols. The operating manual for the control panel is included. Main switch The main switch is located at the front of the temperature testing chamber. Air handling unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air guide plates on the long sides. Feedthroughs The temperature testing chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front: 2 x 82 mm diameter, at the rear: 1 x 85 mm diameter Internal dimensions: width 2000 mm, depth 570 mm, height 600 mm External dimensions: width 3000 mm, depth 870 mm, height 1060 mm Technical data: Data for mechanical load: max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Pjdpozgbmiefx Airjgt Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW, rated current 9 A Fuse on customer side: 16A, slow-blow Temperature testing chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement: sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Steady rest fixed universal Ø 125 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Podpfx Aiozdiqxorjgt

Condition: used, Year of construction: 1994, machine/vehicle number: 884019, functionality: fully functional, power: 15 kW (20.39 HP), total length: 3,600 mm, total width: 2,300 mm, total height: 2,800 mm, overall weight: 8,800 kg, TRUMPF Trumabend 125/3 Year of manufacture: 1994 Control: CNC (DA58) Country of origin: Austria Press force 125 t Bending length 3050 mm Podpfx Aiey Iydlsrsgt Frame gap 2550 mm Total power requirement 15 kW Throat depth 350 mm Approach speed 130 mm/sec Working speed 1–10 m/min Return speed 100 mm/sec Backgauge – adjustable 1000 mm Stroke 200 mm Installation height 400 mm Press capacity 280 bar Space requirement approx. 3.6 x 2.3 x 2.8 m Machine weight approx. 8.8 t Control CNC Control system DA58

Condition: new, plate thickness 1,25 mm roll-body distance 250 mm throat 260 mm distance between roll centers 62 mm tool adaptor 26 mm speed 6,3 m/min total power requirement 0,7 kW weight 170 kg range L-W-H 1020x600x1500 mm Domestic equipments: Pgedpfx Aioyvvruerot - motor driven beading machine - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: used, functionality: fully functional, Year of construction: 1978, machine/vehicle number: LS32, Technical data: 1 ABUS LS column jib crane NL 125KG Capacity at full outreach: 125KG / 0.125t Height: approx. 2.95m Outreach: approx. 3m Psdpsywfk Nefx Airegt Underside of jib: approx. 2.4m Hook height: approx. 2.05m Total weight approx. 400 kg Incl. 125KG Liftket chain hoist, year of manufacture 1995 Slewing range 270°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Additional cranes available, capacities from 80-5000kg, please inquire See pictures Shipping by freight forwarder or collection by appointment only

Condition: used, functionality: fully functional, Year of construction: 1986, machine/vehicle number: LS29, Technical data: 1 ABUS LS column slewing crane, rated load 125KG Load capacity at full outreach: 125KG / 0.125t Height: approx. 2.95m Outreach: approx. 4m Underside of jib: approx. 2.4m Hook height: approx. 1.95m Total weight: approx. 400 kg Incl. 125KG Abus chain hoist Slewing range 270°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Additional cranes available, load capacity 80–5000kg, please enquire See pictures Shipping by freight forwarder or collection by appointment only Pgjdpfx Aeywflteirjt

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: LS8, 1 ABUS LW wall-mounted slewing crane, load capacity / lifting capacity 125 kg Outreach 4 m With Abus GM chain hoist, load capacity 125 kg Weight including wall bracket approx. 200 kg Complete with chain hoist, cable trolley, travelling gear, and small parts Slewing range 270° Article location is 75053 Gondelsheim System is fully dismantled and immediately available Shipping by forwarding agent or collection Podpfsywfmkox Airjgt Please enquire about shipping costs by postal code

Condition: used, Micrometer, micrometer screw -Measuring range: 125 - 150 mm -Handover: as is as seen -Accessories: missing, see photo -other sizes: available Pgodpofn Am Rsfx Airst -Dimensions box: 330/180/H30 mm -weight: 1.1 kg

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg Pgjdpfxshb N Ale Airot

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: Hydraulic tilt cylinder stroke 125 mm -Type designation: 58610 L1405 -Piston rod: Ø 30 mm -Hole: Ø40 x 40 mm -Cylinder: outer Ø 83 mm -Number: 2x cylinders available -Price: per piece Psdpfx Aijgvwalsregt -Dimensions: 545/140/H83 mm / 550/130/H83 mm -Weight: 9.8 kg / 9.6 kg

Condition: used, Electric motor, three-phase motor -Power: 0.125 kW -Speed: 900 rpm -Shaft: Ø 14 mm -Construction: B3 Pgsdpfx Aisghndkorot -Protection class: IP 33 -Price: per piece -Number: 5x available -Dimensions: 230/190/H160 mm -Weight: 10 kg

Condition: used, Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic Torsion 8E 9/125 OS2 -Application area: indoor and outdoor -Length: 115 m -Price: complete -Dimensions roll: Ø 500/325 mm -Weight: 21 kg Pjdsf Tivhspfx Airjgt

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks Pgjdpfx Aegnzxfeiret -Forklift tines: 2 pieces/1 pair -Length: 920 mm -Cross-section: 125 x 40 mm -Photography: see technical drawing in the photos -Dimensions: 1070/600/H125 mm -Weight: 136 kg

Condition: used, Year of construction: 2007, machine/vehicle number: NBGMAN 1, Demag KBK1 / 2 / ALU crane canopy Crane runway with steel structure Pgedpjr Igruefx Airet Dimensions approx. 10m x 4.6m incl. 2 bridges each 125KG payload / lifting capacity Crane runways can be operated independently of each other. Technical data of the system: Crane runway / steel structure made of HEA 140 girders Dimensions as follows: External dimensions - space requirement approx. 10 x 4.6m with overhead crane payload 2x 125KG with 2x Demag DC chain hoist Approx. dimensions: Top steel structure 5.25m Lower steel structure 4.97m Bottom running rail 4.66 / 4.78m (per crane) Bottom bridge 4.31/4.50m Hook height 3.9/4.1m Crane girder length 4 + 6.7m Internal dimension of supports 4.4m Base plate of the prop 40x40cm Prop HEA140 Running rails HEA140 Prop spacing 4.55 + 5.1mm System is supplied complete as supplied: complete steel construction + 2x crane incl. 2x Demag DC chain hoist 125KG Used condition Crane is disassembled and immediately available Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: ZGDS-125, working width: 1,250 mm, bending angle (max.): 165 °, sheet thickness steel (max.): 7 mm, sheet thickness aluminum (max.): 1 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, overall weight: 130 kg, total length: 1,600 mm, total height: 1,100 mm, warranty duration: 24 months, product length (max.): 1,250 mm, stroke length: 100 mm, The segmented sheet metal bending machine, also popularly known as a segmenter, is used to make complex profiles and bends impossible to make with a classic roofing bender. The segmented design of the beams gives a wide range of possibilities for bending even the most advanced flashings. We offer segment bending machines in three working lengths. Our segmented sheet metal benders are created with roofers in mind, used for standing seam flashings, as well as for bending KARO tiles. In the ZGDS series of segmented sheet metal bending machines, all three rows of stones, i.e. the pressure bar, bending bar, as well as the fixed bar, are removable and adjustable. SEGMENTED SHEET METAL BENDING MACHINE Ju9fautx MODEL ZGDS-1125 WORKING LENGTH 1250MM ALL THREE ROWS OF REMOVABLE ADJUSTABLE STONES Pgsdpfx Aiornmv Derjt MAXIMUM THICKNESS OF BENT STEEL SHEET -0.7 MM WEIGHT OF THE MACHINE 125 KG.

Year of construction: 2010, condition: excellent (used), machine/vehicle number: RESHGFW, DEMAG KBK crane canopy crane runway - various cranes with different dimensions in stock - please inquire ! Payload / lifting capacity 125KG - 1000Kg - please ask Technical data of the system: Crane runway made from Demag KBK2/KBK2-L rails with raised trolley - crane girder is between the two runways for maximum lifting height System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable towing, brackets/hangers etc. incl. chain hoist Crane is dismantled and immediately available Various cranes are available, pictures are for illustration purposes only Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Pedpfjrwi Slox Airogt Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 2017, condition: excellent (used), machine/vehicle number: SI8x4125, DEMAG KBK crane canopy crane runway with dimensions approx. 6x5m (5m bridge) This crane is available several times ! Payload / lifting capacity 125 KG - 0,125to Technical data of the system: Crane runway made of Demag KBK1 + KBK2L rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 125KG Demag DC chain hoist - lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Pjdpfsupwa Rsx Airogt Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125 mm 127 x 125 mm dimensions of saw-band 1435 x 12,7 x 0,65 mm band speed 38 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg dimensions 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band Pgedpoupw R Nofx Airot speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile.

Condition: as good as new (ex-display), For sale Hoist motor used/reconditioned Psdpfx Aoh Up Uveiregt for a DH wire rope hoist NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: as good as new (ex-display), For sale travel motor used/reconditioned NB! we have more than 15,000 Demag parts in stock see our website or other ads Podpfx Aioh Uqbbsregt

Year of construction: 2000, condition: excellent (used), VACUUM CALIBRATION TANK LÜERS VT125-1-6 Pjdjiidm Tjpfx Airogt Chamber: 1st Pipe Diameter: Max 125mm Length: 6 meters Feed: electrically back and forth Year of construction: 2000 Material: stainless steel

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DN-125-250 S6 PPV Podpfx Aoiiwgieirjgt -Stroke: 250mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm / M24 x 2 -Max. Pressure: 10 bars -Dimensions: 530/140/H140 mm -Weight: 12.7 kg

Condition: used, Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic HQN1500 4G 50/125 OM2 -Application area: outdoor -Length: 147 m Psdpfegul S Rex Airogt -Price: complete -Dimensions roll: Ø 900 x 485 mm -Weight: 25 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-100-125 PPV -Piston: Ø 100 mm -Stroke: 125 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 126/126/H358 mm Pgjdpod S Ap Ujfx Airst -Weight: 8.3 kg

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet -Adjustable -Support surface width: 125 mm -Price: per piece -Number: 17 pieces -Dimensions: 278/125/H78 mm Psdpfx Aied Rhd Asrsgt -Weight: 8.1 kg/piece