Used Weeke Vantage 200 for sale (16,631)

Condition: used, weight max. in kg / kg fork length / mm stroke height / mm HOPPECKE battery charger D400 45.6/200 FT B-FRFT Battery capacity: 104Ah Battery Rated Voltage: 45.6V Charging Voltage: 1.60Vpc Umax shutdown: 1.68 Vpc Charging current: 200A Degree of protection: IP21 Isdpfxsy Tbu Ne Adkjtg Article number: 516742

Year of construction: 1996, condition: used, Rollable chip extraction for aluminum or PVC Itedpfx Ajy Tanhodkjg

Condition: excellent (used), functionality: fully functional, BMB Coating System for Printed Circuit Boards, Model TUA-200 / 2 in EXCELLENT condition. Purchased: 2023 (as-new condition) and only in operation for 6 months. Version: Professional Version (excellent feature set) - High speed coating up to 4x faster - 3 coating processes in one unit - Suitable for components up to 1200x570 mm - Permanent viscosity/temperature control - Full traceability (depending on version) - Tool recognition and parameterization - Maximum protection by encapsulating components with coating - (Digital job-documentation system, currently under review) - Large paint tank capacity for tall components - Paint consumption calculation - Innovative, robust, and proven technology With the BMB Traceability and PDM System (equipment subject to clarification), you can track at any point which component was produced, when, where, by whom, and how. All requirements regarding ISO/TS 16949 are fulfilled. When setting up a tool, the PDM system automatically recognizes all necessary parameters for coating. Work instructions, videos, technical data sheets, processing notes, etc. – everything at your fingertips! Itedpov I Tb Eofx Adksg 19″ swivel smart touch panel Viscosity control Tool monitoring: automatic recognition and adjustment Electrically height-adjustable machine Coating processes: - Dip Coating (DipCoat) - Selective Contact Coating (SCC®) - Selective Transfer Coating (STC®) The system can be shipped by freight carrier upon request. #8300

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,752 h, functionality: fully functional, Equipment: documentation/manual, We are offering this ready-to-use GILDEMEISTER CTX 200 series 2 CNC turning and milling center, year of manufacture 2001. Manufacturer: GILDEMEISTER Itodjyu Uytjpfx Adksg Type/Model: CTX 200 series 2 Contrary to the photo, the machine is sold with a three-jaw chuck and not a collet chuck; various VDI20 toolholders are included as well. The short bar feeder has not been in operation for a long time, so its condition is unknown. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Technical specifications: Applications: Straightening and bending of steel beams, steel plates, pipes, welded structures, etc. Pressing force: 200 tons Table size: 700 x 700 mm Tool height: 600 mm Ijdey S U Umjpfx Adkjtg Straightening ram height: 600 mm Stroke length: 0 - 550 mm Bending speed: 0 – 0.6 m/min Motor power: 18.5 kW CE marking Weight: approx. 12.5 tons Accessories: Straightening beam with abutment: 5200 mm Condition: very good, almost new condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, maximum load weight: 2,031 kg, overall weight: 2,500 kg, axle configuration: 2 axles, first registration: 12/2005, next inspection (TÜV): 01/2025, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 300 mm, loading space volume: 1 m³, * 5-chamber tail lights ----Construction: Low-bed trailer (loading height approx. 500 mm) with sliding ramps (ramp length approx. 1,600 mm), galvanized steel side walls at the front/left/right, extendable aluminum rear wall, hardwood floor, lashing points. Vehicle frame and towing device are galvanized.----Humbauer axles Itjdpoy Tc Idjfx Adkjg For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase agreements, invoices, proforma invoices, orders, and sales negotiations.

Condition: new, Year of construction: 2026, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Manufacturer: GERD WOLFF Website: Technical Details: • Length 1000 mm • Width 1000 mm • Height 200 mm • Weight 300 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Itedpey S D Naofx Adkog Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2023, weight 390 kg height 1000 mm 0 204 l length 1300 mm revolutions per minute 1500 U/min voltage 380/50 V/Hz engine output 1,6 kW The VKT-200 is a linear vibratory finishing machine and is used for the surface treatment of parts made of all types of metallic and non-metallic materials. The machines in this series are generally used for long and large-volume parts. With the help of movable partitions in the machine, sensitive parts can be processed without being damaged by friction from other parts. Optional accessories - Pneumatic sound insulation hood - Speed control - Dosing pump - Magnetic valve - Electrical control panel stand Itodpfxey S Dn Ne Adkeg - Rinsing water pipe system The pictures are for orientation only. The optional accessories can be surcharge. Gerd Wolff reserves the right to change the colour and technical data of the machines. The VKT 200 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: excellent (used), MITSUBISHI MR-S11-200-E31 Iodpfx Ajy S Dvyedkotg SER. 0Y20009

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, clamping force: 70 kN, screw diameter: 32 mm, injection weight: 109 g, type of input current: AC, The Negri Bossi 70T in very good condition comes with hopper loader distance between tie bars 360x315 Isdpfx Aey Rvfkedketg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, injection weight: 109 g, The Negri Bossi 55T in very good condition the screw size 32mm distance between tie bars 315x280mm year of manufacture 2002 Iedpfx Ajy Rvcvjdkstg

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS Iodpfx Adett Da Iokotg 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion-CNC 640M, total height: 2,651 mm, total width: 2,825 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,915 mm, number of axes: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It features an impressive X-axis travel of 1120 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1460 x 510 mm and a maximum table load of 800 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 200 B vertical machining centre we have for sale. Contact us for further details. • Machining capacity: • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 Ijdpoy S Sw Sofx Adkotg • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot pitch: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW • Max torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed rate: • X: 8 m/min • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max tool Ø with adjacent tool: 80 mm • Max tool Ø without adjacent tool: 110 mm • Max tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L • Pressure: 0.5 kg/cm² • Flow: 20 L/min • Electrical data: • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard equipment: • Full enclosure • Through spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk reader • CE compliant machine • Side chip conveyor preparation • Note: Machine is prepared for a side chip conveyor (conveyor not included) Technical Specification Taper Size ISO 40

Condition: used, mileage: 92,568 km, lifting height: 94,000 mm, Year of construction: 2018, Drivetrain Drive: Wheel Weights Empty weight: 75.580 kg Functional Lifting capacity: 200.000 kg Iedey A Dwlepfx Adkstg Dimensions of cargo space: 1530 x 299 x 399 cm Identification Serial number: 093970 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Bridgestone Carrier engine: - Upper engine: Liebherr Upper hours: 7127 h Counterweight: 72000 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2022, functionality: fully functional, table width: 3,200 mm, We are offering this new BORUI CNC 200 / 3200 hydraulic CNC press brake, year of manufacture 2022. Manufacturer: BORUI CNC Model: 200 / 3200 Year of manufacture: 2022 Condition: new Type: hydraulic CNC press brake If you have any questions or need further information, please feel free to send us a message or give us a call. Itedpfoy Sv Dpex Adkjg

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Iedpfon R A Ewsx Adkotg Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height.

Condition: new, Year of construction: 2026, functionality: fully functional, 5 kW, 7.5 HP, mobile on sturdy swivel castors Cutting height: 200 mm Cutting height at 45°: 140 mm Iedodxxadjpfx Adkjtg Tiltable to the left up to 60° Tiltable to the right up to 45° Cutting length: 420 mm at 90° position Cutting length at 45° tilt: 300 mm Tiltable to the left 60°, to the right 30°, adjustable by hand crank from the rear (optionally also from the front) Includes 1 saw blade: 520 x 4.4 x 50 mm, 60 teeth, negative rake Left roller conveyor with scale and stop slider, length 2,000 mm up to the saw blade Machine length: 4,000 mm 1 roller conveyor extension with scale and second stop slider Extension mounts on the left side, length 4,000 mm. This extension conveyor also includes a retractable measuring rod with a stop, making it possible to cut timber to an accurate length of up to 7,500 mm on the left side 1 feed roller conveyor, mounts on the right side, length up to the saw blade: 2,000 mm Options: pneumatic material clamping, laser cutting indicator With appropriate conversion kit, also suitable for aluminum processing

Condition: new, Year of construction: 2025, machine/vehicle number: 20250205009, Field of application: Construction Empty weight: 560 kg Generator capacity: 200 kVA Dimensions of cargo space: 103 x 54 x 77 cm CE mark: yes Frequency: 50 Voltage: 400 Itodpfx Adowqkmcjkjg Production country: CN Please contact Team DPX for more information

Condition: new, Year of construction: 2026, machine/vehicle number: 20241119016, fuel type: diesel, motor manufacturer: Perkins 1106A-70TAG3, General information Field of application: Construction Weights Empty weight: 2.025 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 331 x 113 x 160 cm CE mark: yes Other information Fuel consumption: 31.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44L Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 224 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel Itsdpjyy H U Iefx Adksg - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 1206J-E70TTAG, General information Field of application: Construction Weights Empty weight: 3.651 kg Ijdpfx Aox S Umvedkstg Functional Generator capacity: 200 kVA Dimensions of cargo space: 409 x 142 x 237 cm CE mark: yes Other information Fuel consumption: 32.4 Liter / Hour at 75% Load Generator: FG WILSON LL5114F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 822 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: FGWPEP48CRPC03579, fuel type: diesel, motor manufacturer: Perkins 1106A-70TAG3, General information Field of application: Construction Weights Empty weight: 2.058 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 352 x 133 x 168 cm CE mark: yes Iodpfx Adsw Rutfokotg Other information Fuel consumption: 30.7 L/Hour 75% Load Prime Generator: FG Wilson FGL30120 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 394 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: FGWPEP48ERPC03709, fuel type: diesel, power: 160 kW (217.54 HP), motor manufacturer: Perkins 1106A-70TAG3, General information Field of application: Construction Weights Empty weight: 1.548 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 251 x 101 x 164 cm CE mark: yes Other information Fuel consumption: 30,7 L/Hour at 75% Load Prime Generator: FG Wilson FGL30120 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 394 l Itsdjwafzmopfx Adkeg Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 20251112016, fuel type: diesel, motor manufacturer: 200, General information Field of application: Construction Weights Empty weight: 2.350 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 330 x 120 x 180 cm CE mark: yes Itjdpow Ruruefx Adkjg Other information Fuel consumption: 31 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A44L Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 224 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE200TN7400697, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 1.931 kg Itedpfx Adsxq Uqcekjg Functional Generator capacity: 200 kVA Dimensions of cargo space: 335 x 117 x 175 cm CE mark: yes Other information Fuel consumption: 34.2 Liter per Hour at 75% Load Generator: Caterpillar A2635L41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 325 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C71CECW08545, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Itedpfx Adewvdxpsksg Field of application: Construction Weights Empty weight: 2.203 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 352 x 133 x 181 cm CE mark: yes Other information Fuel consumption: 40.2 Liter/Hour Prime Generator: Caterpillar R2455L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 418 l Production country: UK Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank