Used Wemhöner Variopress Basic 1000S for sale (8,692)

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included Dsdpfx Aoy Aktmoqcech screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: used, mileage: 252,000 km, power: 240 kW (326.31 HP), first registration: 04/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Actros 2533 refuse collection truck * 5 units in stock * First registration: 04-2017 Djdpsyq Dcpjfx Aqcech * Automatic transmission * Engine brake * Faun Variopress 524 II * Zöller bin lifting device * Air conditioning * Steering axle * More pictures and videos available via WhatsApp * All information subject to change; interim sale reserved.

Condition: new, Year of construction: 2026, LUFT screw compressor represents a modern solution in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance ensure efficient and trouble-free operation. The LUFT 1000 stands out with its direct drive system, which delivers significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher output with reduced energy consumption. The compressor generates a maximum pressure of 10 bar. Full control over operating parameters is provided by an intuitive electronic control panel from the MAM series, giving access to key compressor data and increasing flexibility and process control. Technical specifications Motor power: 7.5 kW Voltage: 400 V / 50 Hz Air delivery (0–6 bar): 990 L/min Air delivery at 6 bar: 950 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 930 L/min Dedjy E Hpcspfx Aqcech Outlet connection diameter (G): 1/2" Dimensions: 810 × 610 × 850 mm Weight: 160 kg

Condition: new, Year of construction: 2026, LUFT 1000 INVERTER Screw Compressor – Advanced Technology and Energy Efficiency in Pneumatics Dcjdpfx Aqomqlhvocoh The LUFT 1000 INVERTER screw compressor combines cutting-edge pneumatic technology with high-quality materials and components. With low operating costs, ease of use, ergonomic and durable design, and high performance, this device guarantees efficient and trouble-free operation in demanding industrial environments. The LUFT 1000 INVERTER stands out with its direct-drive transmission, which offers significantly better efficiency and reduced power loss compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher output and lower energy consumption. The maximum pressure generated by the compressor is 10 bar. Complete control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving the operator access to all critical system data and ensuring maximum flexibility and process control. Key Advantages of the 7.5 kW Induction Motor with Inverter Drive Significant Energy Savings The inverter enables smooth and precise regulation of the motor’s speed. The compressor adjusts its output to the current demand for compressed air, eliminating idle running, frequent start/stop cycles, and energy waste caused by venting excess air. Depending on your facility’s air usage profile, energy savings can range from 25% to even 50%. The more variable the air demand, the greater the potential savings. Stable Air Pressure With continuous speed regulation, the inverter maintains an almost perfectly stable pressure in the compressed air system, regardless of demand fluctuations. This is critical for the correct operation of pneumatic tools and machines, preventing pressure spikes and enhancing process accuracy. Reduced Starting Current and Electrical Load The inverter allows for soft-start motor operation, avoiding high inrush currents that can overload electrical networks and cause voltage drops. This protects the electrical infrastructure and reduces the risk of disturbances. Extended Component Lifespan Smooth operation without sudden starts or stops significantly reduces mechanical stress on the screw block, bearings, coupling, and motor. This translates into a longer service life for the compressor and lower maintenance and repair costs. Quieter Operation When operating at reduced speeds (during lower demand), the compressor generates less noise, improving the acoustic comfort in the workplace — a significant benefit for both operators and the surrounding environment. Greater Flexibility and Demand Matching The inverter-driven compressor can efficiently meet a wide range of compressed air requirements, making it an ideal solution for facilities with fluctuating air usage throughout the day, week, or month. Advanced Control and Diagnostics The inverter integrates with modern control panels to offer comprehensive monitoring, error diagnostics, remote control, and maintenance scheduling. This gives users full control and allows for optimization of the compressed air system’s performance. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg

Condition: used, Year of construction: 2004, operating hours: 3,862 h, machine/vehicle number: LC619, Used Tetra Pak TBA-8 SQ 1000 ml filling machineTechnical Specifications & Performance DataThis complete aseptic carton packaging line centers on a Tetra Pak TBA/8-1000 SQ, delivering reliable performance for high-quality beverage production and industrial packaging applications. Engineered for 1.0L carton formats, the line integrates filling, capping, conveying, case packing, and shrink-wrapping functions to provide a cohesive used bottling line solution for second hand operations seeking dependable uptime and consistent output.Primary filler: Tetra Pak TBA/8-1000 SQ (aseptic) (3.862 working hours). Production speed: up to 5,000 packages per hourContainer type: Carton (Tetra Pak style)Format compatibility: 1.0L cartonsCapping unit: Tetra Cap Applicator 88 Lid (for Stream Cap closures) ( 7.709 working hours).Secondary packaging: Tetra Cardboard Packer TCBP-70Shrink tunnel: Tetra Thermo Shrink Tunnel TTST-51Conveying: Accumulation conveyor system with Dicolube TP lubricationManufactured by: Tetra Pak engineeringLine application: Beverage production and industrial packagingAdvanced Automation & Control SystemsThe line integrates Tetra Pak automation across its modules for coordinated operation and optimized throughput. The TBA/8-1000 SQ aseptic unit ensures controlled filling conditions, while the cap applicator, conveyors, and end-of-line equipment synchronize for smooth handling and minimal bottlenecks. Safety interlocks and CE-marked protections support secure operation. Quick adjustments on the capper and packer facilitate efficient format handling within the 1.0L range.Centralized module controls for synchronized line operationAutomated cap application for Stream Cap closuresCE-compliant safety architecture across major modulesLubrication-assisted conveyor operation with Dicolube TPProduction Line Integration CapabilitiesDesigned as a cohesive packaging machinery set, this second hand line offers plug-and-produce integration across filling, capping, conveying, packing, and shrink-wrapping. The accumulation conveyor system stabilizes product flow between units, protecting upstream aseptic operations and downstream secondary packaging. The configuration is ideal for producers standardizing on 1.0L cartons.Inline configuration from aseptic filling to end-of-line wrappingConveyor accumulation for balanced flow and reduced stoppagesSuitable for beverage production requiring aseptic carton packagingOptimized for 1.0L cartons; straightforward adjustments within this formatMachine Condition & Maintenance HistoryThe equipment is presented in excellent working order and ready for immediate use, representing a dependable used bottling line for rapid deployment. Component-level details include:TBA/8-1000 SQ: 3,862 operating hours; excellent, ready for immediate useTetra Cap Applicator 88: 7,709 operating hours; working condition for Stream ... Dcsdpfx Aoy Ef Sceqceh

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. Dsdpfx Aqoiz A Ezjcjch DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Dodpjyniz Esfx Aqcjch Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Condition: used, Ormicscissor lift table, load capacity 1000 kg, maximum lifting height 180 cm, platform dimensions: 275x103 cm, overall dimensions: 275x103x38 (h) cm, weight 700 kg. Djdpfey D Du Tox Aqcjch

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Dcedpfjxw Tg Nex Aqcjh Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Main machine WORKING – vacuum pump requires replacement or repair.

Condition: new, axle configuration: 2 axles, Equipment: ABS, Humbaur HBT 106224 BS Basic, tapered version Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm External dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Gross vehicle weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tyres: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1800 mm Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3000 kg per lashing point; rings recessed in the platform floor 7 pairs of lashing rings, 1000 kg per lashing point; rings integrated in the external frame Standard equipment: Axles: Axles from renowned manufacturers Suspension: Low-maintenance parabolic suspension with load compensation Tyres: Manufacturer’s tyres of choice on steel rims Braking system: ABS braking system per ECE directive, with ALB function ABS plug connection ISO 7638 Spindle parking brake 2 interchangeable coupling heads (red/yellow) ISO 1728 Towing installation: Drawbar with DIN screw towing eye Ø 40 mm, galvanised, infinitely adjustable via crank Electrics: 24V lighting system with multifunction rear lights and LED side marker lights 15-pin connector for lighting Frame: Heavy-duty, welded and hot-dip galvanised frame Tapered rear end, 12° incline Floor: 40 mm softwood planks Side panels: Anodised aluminium side panels, laterally foldable and removable Corner stanchions, galvanised, insertable front and rear Ramps: 2 foldable steel ramps, one-piece, galvanised, laterally adjustable Ramp lifters: 1 gas strut per ramp Ramp lock at rear stanchion Ramp coating: galvanised grating Supports: Reinforced 12 t gearbox support winch with load and fast gear 2 telescopic folding supports at left and right rear of vehicle Dcjdpfxjyfvg As Aqcjh Features: Steel mudguards with antispray mats Side underrun protection up to the 1st axle, foldable 2 wheel chocks with holder Contour marking at side and rear Space for two-line licence plate on the left ramp A leasing or financing offer is available on request. Mr. Seidel (Tel.) will be happy to assist you. Further information is available on our homepage. ... Subject to errors, changes, and prior sale!!! = Additional information = GVW: 11,900 kg External dimensions: 0 x 2550 x 3260 Please contact Tobias Ebert for further information.

Condition: new, Year of construction: 2026, Desciption in english language after demand. Djdjdulhvopfx Aqcsch

Condition: new, Year of construction: 2022, functionality: fully functional, SAFETY LIGHT CURTAIN C4000 BASIC Set, transmitter and receiver NOS SICK: C40E-1501BH030; ORDER NO.: 1022248 SICK: C40S-1501AA030; Order No.: 1022212 RECEIVER; Resolution: 14mm; Height: 1500mm Dcodpoxnpqxofx Aqcsh

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Dodeyzxyxjpfx Aqcsch Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: used, Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Distance between centres [mm]: 1000 - Centre height [mm]: 135 Dcsdpfew Sk Dvox Aqcoh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment Dodpfjyhbq Eex Aqcech • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: used, Używana klaryfikująca prasa filtracyjna produkcji Seitz Orion typ OF 100/150 w wykonaniu ze stali kwasoodpornej. Prasa posiada 154 płyty filtracyjne wykonane ze stali kwasoodpornej o wymiarach 1000 mm x 1000 mm, oraz dwie płyty końcowe. Powierzchnia filtracji ok 310 m2. Zamknięcie hydrauliczne. Prasa zamontowana na ramie ze stali KO. W zestawie z maszyną przyłącza podawania, manometry i lokalny panel sterowania. Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm # of Plates: 154 stainless steel filter plates Eyes: 4 Plate Type: Clarifying Djdpjyi Eygofx Aqcoch Surface Area: 310 m2 Closure: Hydraulic

Condition: used, functionality: fully functional, machine/vehicle number: F20270E00720, Year of construction: 2014, operating hours: 230 h, load capacity: 1,000 kg, lifting height: 1,490 mm, free lift: 1,490 mm, fuel type: electric, mast type: simplex, construction height: 1,950 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian pallet stacker Chassis number: F20270E00720 Load center: 600 mm Mast type: Standard Condition: Refurbished, no warranty Technical condition: good Dcedpfxjy Dkgio Aqceh Description: With new battery.

Condition: used, Year of construction: 2002, Machine is in good condition and can be inspected in operation upon appointment. Availability: 06/2026 Full technical specifications in the attached document. Please note: 5 extra machines are available (ARBURG Allrounder 420C 1000-250) Contact us for more information. Clamping force: 1000 kN Opening force: 35/250 kN Opening stroke: 500 mm Mould installation height (min): 250 mm Distance between platens (max): 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Injection pressure: 2470 / 1820 / 1390 bar Screw diameter: 30 / 35 / 40 mm Dcodpfx Aqsyx D Ayocsh

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 20 mm, turning diameter: 180 mm, turning length: 350 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, overall weight: 52 kg, Technical Specifications Parameter Specification Turning length 350 mm Turning diameter 180 mm Spindle taper MT3 Tailstock taper MT2 Chuck diameter 100 mm Spindle bore 20 mm Metric thread range 0.5–2.5 mm Speed range 50–2500 rpm Motor power 0.55 kW Weight 52 kg Machine dimensions (L × W × H) 810 × 305 × 370 mm Equipment and Free Accessories Set of change gears Dcodpfjyud H Njx Aqcoh Chip guard 4-way tool post 3-jaw chuck 100 mm Chuck guard Chuck key Set of Allen keys Set of jaws Dead center Drill chuck Arbor Delivery Delivery to the customer is possible. The transport cost is calculated individually by the shipping company. If you are interested in other machines, we encourage you to visit our website.

Condition: used, Year of construction: 2023, Spraying machine KaMa, KR BM 1000 B, The spraying machine is a demonstration model from a trade fair. It was only used for test and demonstration purposes. The machine is ready for painting and is already equipped with1 Bings Marple 8/25 high-pressure pump (up to 175 bar)and 4 Sames-Kremlin AVX Airmix spray guns. The machine is fitted with a changeover valve for quick paint changes, a lever switchable toa maximum of 3 paint circuits and 1 flushing agent pump (options) The machine is in an explosion-proof version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma Dcedpeumvnhofx Aqcsh - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bis max. 175bar - Supply air box - Suitably for water based lacquer - Length 3243 mm - Width 3482 mm - Height 2450 mm - Voltage / HZ 400 / 50 - Colour 7035, lichtgrau - Weight 3.100 kg _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2005, operating hours: 40,000 h, clamping force: 25 kN, displacement volume: 440 cm³, injection pressure: 1,550 bar, overall weight: 2,500 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz Dedpoynbcnefx Aqcoch delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1998, operating hours: 4,500 h, clamping force: 50 kN, displacement volume: 200 cm³, injection pressure: 2,587 bar, overall weight: 2,500 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Dcedpfx Ajwi Uzhjqcjh delivery time: on request terms of payment: 100% prior to delivery

Condition: new, number 53 Positionen weight 45 kg condition neu 0 Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 pcs. quick clamping bolts 2 pcs. universal stop 100mm 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 pcs. universal stop 300mm Dcjdpoupxkqjfx Aqcoh 2 pcs. Stop and clamping angle 75mm 6 stop and clamping angles 175mm 4 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis

Condition: new, number 24 Positionen weight 22 kg condition neu 0 Basic set 1 / 24 pieces for table top thickness 15 and 25mm 4 clamps, clamping height 300mm, variable projection 8 clamping bolts Dcsdpfx Ajupxh Aoqcsh 2 pieces stop 100mm 4 pcs. stop 150mm 2 pieces stop 225mm 1 piece torch holder 1 piece perforated brush 30mm 1 piece Separating Lotion 500ml 1 pc. Welding table cleaner on a natural, biological basis 500ml

Condition: new, number 32 Positionen weight 35 kg Basic set 2 / 32 pieces for table top thickness 15 and 25 mm 6 pieces screw clamps 12 pieces quick clamping bolts 2 pieces universal stop 100 mm 4 pieces universal stop 150 mm 2 pieces universal stop 225 mm 2 pieces stop and clamping angle 175 mm 1 piece hole brush 300 mm 1 piece burner holder 1 piece non-stick spray 500 ml, natural, biologically based 1 piece welding table cleaner 500 ml, natural, biologically based Dcedpfx Aqsupxfnscoh