Used Zhejiang Xinchai Zl 918 for sale (320)

Condition: used, Year of construction: 2004, functionality: fully functional, Bograma BSM 750/220/15 Servo punching line, year of manufacture 2004 Bograma BSM 750/220/15 Servo, year of manufacture 2004 Lajdpfsygr I Sjx Am Noa Bograma sheet feeder TA 15, year of manufacture 2004 Bograma shingled delivery SAB 750, year of manufacture 2004

Condition: like new (used), Year of construction: 2020, CNC-4 axis dividing head for CNC BAZ - CNC milling machine Fabr.HOFMANN Type : HOWIMAT CNC 160.2 / Z - LEAN Bj.2020 Mint condition Only test run . Control Hofmann CPS 20 Spindle bore : 80 mm Chuck Röhm ZS 160 . Documentation available . Lsdeu Et Scjpfx Am Nsaa More data pull data sheets .

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical Data for EBERT TLS 43 ATV Special Low Loader: Permissible kingpin load: 19,000 kg Permissible axle load: 24,000 kg Gross vehicle weight: 43,000 kg Unladen weight (DIN approx.): 12,500 kg Low bed length i.L.: approx. 6,650 mm + 4,000 mm Axle table length: 2,700 mm Overall width: 2,550 mm Loading edge/low bed: approx. 200 mm - 350 mm Sliding table length: 500 mm Low bed width extension: up to 3,050 mm Low bed telescopically extendable by: 4,000 mm B-dimension: 12,000 mm Entire vehicle flame-sprayed galvanized, with epoxy primer and 2K finish Oversize signage front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS independent wheel suspension, hydraulically steered and suspended Front raised bed: - Doors in corners left and right, accessible from outside - Tool box with lid behind the front wall, height 600mm, width 2,480 mm, depth 7,500 mm - Spare wheel on the raised bed, behind the partition on the right - Steps on the right side for access from the low bed to the front raised bed - Hydraulic coupling for uncoupling on the left, 6-way Multi-Faster coupling - 6 lashing points (3,000 kg, outer raised bed/fall arrest rings) - 2 lashing points (5,000 kg, on top of the longitudinal beams, towards the rear) Low bed: - Climbing aids at boom – extendable - Low bed telescopically extendable by 4,000 mm, lockable every 500 mm - With sliding table, lockable every 250 mm - 28 lashing points (10,000 kg, outer frame) - 24 stake pockets 90x90 mm, evenly distributed for low bed width extension up to 3,050 mm - 50 mm hardwood planks placed between extension tubes, 10 mm protrusion Rear raised bed: - Front of raised bed sloped and perforated, prepared for retrofitting ramps (galvanized using adapters) - Rear: ramp mounting profiles (Altec) – C-rails - 6 lashing points (10,000 kg, outer raised bed) - 6 lashing points (5,000 kg, in excavator recess) - 8 lashing points (5,000 kg, for oversize on outer frame) - Excavator recess closed at front and rear with removable wooden floor board Electrics: - NATO spiral cable connection, power supplied by towing vehicle - Rotating beacon centrally on the rear - Side marker lights in LED version - Standard vertical taillight (LC5) - Work lights on raised bed for illuminating low bed - Uncoupling: sensor for safety and pressure switch for suspension Air: - Aluminum air reservoirs 60 l (2x10 l, 2x20 l) - TEBS modulator - Extension locking left and right (valve at rear, side of raised bed) - Double-release valve Hydraulics: - Hydraulic system on raised bed for steering, suspension and detachable gooseneck Accessories: - 2 x 4 hardwood planks for widening low bed and center table - 2 wheel chocks for uncoupling - 4 support wedges On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (tel.) will be happy to assist you. For more information, please visit our homepage. Subject to errors and prior sale! New roadworthiness certificate (HU), rental available Lasdeyfvwbepfx Am Noa GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical Data for EBERT TLS 43 ATV Special Low Loader: Permissible king pin load: 19,000 kg Permissible axle load: 36,000 kg Gross vehicle weight: 55,000 kg Unladen weight (per DIN): approx. 15,500 kg Ledpeyfu N Asfx Am Neaa Lower deck length i.L.: approx. 6,650 mm + 4,000 mm Axle table length: 3,550 mm External width: 2,550 mm Loading edge/lower deck: approx. 200 mm – 350 mm Sliding table length: 500 mm Lower deck widening to: 3,050 mm Lower deck extendable by: 4,000 mm B-dimension: 13,300 mm Entire vehicle flame-sprayed galvanized, with epoxy primer and 2K paint finish Oversize warning signs front and rear, with red/white panels Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single wheel suspension, hydraulic steering and hydraulic suspension Front high-bed: Side panels 600 mm high Corners at front of high-bed angled Exterior-access doors in front corners (left and right) Lockable storage box with lid behind the front wall; height 600 mm, width 2,480 mm, depth 7,500 mm Spare wheel on high-bed, right side behind partition wall Staircase on right side for access from lower deck to front high-bed Hydraulic coupling for uncoupling on left side (6-way multi-faster coupling) 6 external lashing points, 3,000 kg each (fold-down lashing eyes) on high-bed 2 lashing points, 5,000 kg each, on upper longitudinal beams (to the rear) Lower deck: Climbing aids at the boom – pull-out Outer frame thickness 8 mm Lower deck extendable by 4,000 mm, lockable every 500 mm With sliding table, lockable every 250 mm 28 external lashing points, 10,000 kg each, on the outer frame 24 plug-in sockets 90 x 90, evenly distributed for lower deck widening to 3,050 mm Between extension beams, 50 mm hardwood planks are placed, protruding by 10 mm Rear high-bed: Front of rear high-bed sloped and perforated to allow retrofitting of ramp mount profiles (galvanized adapters) At rear: ramp mount profiles (Altec) – C rails 8 external lashing points, 10,000 kg each, on rear high-bed 6 lashing points, 5,000 kg each, in the excavator recess 10 lashing points, 5,000 kg each, for oversize loads on the outer frame Excavator recess can be closed at front and rear with insertable wooden floor plates Electrics: Use NATO spiral cable; power supplied by tractor unit Roof beacon centered at rear LED side marker lights Standard vertically mounted taillight (LC5) Work lamp on the high-bed to illuminate the lower deck Oversize warning signs front and rear, with controls for uncoupling, safety sensor, and suspension pressure switch Air: Aluminum air reservoir 80 l TEBS modulator Slide-out lock left and right (valve located at rear high-bed sides) Double release valve Hydraulics: Hydraulic system on high-bed for steering, suspension, and detachable gooseneck Accessories: 2 x 4 pieces hardwood planks for lower deck widening and intermediate table 2 wheel chocks for uncoupling 4 wheel chocks On request, we can provide a leasing or financing offer. Mr. Ebert (phone...) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale.

Condition: used, axle configuration: 2 axles, Year of construction: 2011, Equipment: ABS, = Further Options and Accessories = - EBS - Electronic Braking System - Rear air suspension - Front air suspension = Remarks = For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone). Hüffermann HSA 18.70 P container chassis Lajdpfx Amjyfryls Nea 40 mm towing eye, coupling heads, BPW axles, Wabco ABS, drum brakes, spring-loaded brake, permissible total weight: 18,000 kg, unladen weight: 3,418 kg, payload: 14,584 kg, tyre tread: 1st axle 10-11 mm, 2nd axle 11 mm. Upon request, we will be happy to provide you with a leasing or financing offer. Mr. Seidel (phone) will gladly assist you. For more information, please visit our website. ... Errors, changes, and prior sale reserved !!! - = Further Information = Unladen weight: 3,418 kg Payload: 14,582 kg Gross vehicle weight: 18,000 kg External dimensions: 0x2550x1200 Please contact Tobias Ebert for more information.

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for EBERT TLS 43 ST Special Low Loader: - Permissible fifth wheel load: 19,000 kg - Permissible axle load: 24,000 kg - Gross vehicle weight: 43,000 kg - Payload: approx. 32,200 kg - Low bed length: 9,350 mm - Axle section length: 2,700 mm - Overall width: 2,550 mm - Loading edge/low bed height: approx. 200 mm / 350 mm - Oversize marking at front and rear with red/white boards - Wheels: 245/70 R 17.5 Steering: TRIDEC Axles: 12,000 kg – Gigant axles, hydraulically steered Electrical system: - Use NATO coil, power supplied by towing vehicle - Central rotating beacon at rear - LED side marker lamps - Standard upright taillights (LC5) Hydraulics: - Hydraulic system on the raised bed for steering On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (tel.) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! New general inspection (HU), rental possible Lsdpfx Aeyfp Aqsm Njaa = Further information = Gross vehicle weight: 43,000 kg Please contact Tobias Ebert for further details.

Condition: used, empty load weight: 6,850 kg, maximum load weight: 29,150 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2011, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, color: white, Year of construction: 2011, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, * German semi-trailer * Refrigerated semi-trailer made of CFRP (carbon fiber reinforced plastic) in a single piece. As a result, it is considered virtually indestructible. * Condition: see photos * Body manufacturer: TTT The Team Composite AG, Stade * Frigoblock HK 25 SL * Cooling capacity: from -20°C to +30°C * Electric drive * Roller shutter door * Road and standby operation * Pallet capacity: 33 Euro pallets * Cargo space dimensions: 13,400 x 2,470 x 2,650 mm * Axles with disc brakes * First axle liftable * Air suspension + raising/lowering function * Storage box * Gross vehicle weight (GVW): 36,000 kg * Payload: 29,150 kg If a new TÜV inspection is required, we are happy to provide an offer from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new SP, and without new UVV. More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish Note: Laodpfjwvuixsx Am Nea We offer—and strongly recommend—viewing and inspection of the goods, so that the buyer does not develop incorrect expectations regarding the condition and suitability. Inspections and viewings are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank We offer you here a crash barrier for sale. The scope of delivery includes 01x crash barrier, used Total length: approx. 2,530 mm Clear width: approx. 2,350 mm Total height: approx. 600 mm Total depth: approx. 90 mm Consisting of each: 01x CS-Sigma profile, used Lodohncu Sspfx Am Nsaa Material color: sendz. galvanized Profile dimensions: C: 300 x 75 x 2 mm Weight / pc.: approx. 16.00 kg Clear width: approx. 2,300 mm 02x Post, used Material color: hot-dip galvanized Total height: approx. 600 mm Incl. 2 welded-on screw-on plates: approx. 200 x 100 mm Square profile: 90 x 90 mm Weight / piece: approx. 15.00 kg Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm General information about the item: This item is only offered for collection. Any other desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: excellent (used), The scope of delivery includes: 01x crash barriers, second choice Clear width: approx. 2,500 mm Lsdpfx Amovir Hie Njaa consisting of each: 01 x C - profile, used Material color: galvanized Profile dimensions: 300 x 85 x 28 x 15 mm Material thickness: 3.0 mm Length: 2,400 mm 02x L- collision protection corners, new Material color: yellow / black according to DIN standard Height: 400 mm Unit weight: 6.10 kg Outer width: 305 mm Side length: 170 x 170 mm Hole diameter: 15.5 mm Material thickness: 5 mm 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier guardrail is supplied compl. delivered pre-assembled. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any other desired transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Included in the scope of delivery: Attachment strip, used Material color: sendzimir galvanized Total width: 1,282 mm Total height: approx. 130 mm Weight per unit: approx. 1.68 kg. Remark: As this is a used item, may be damaged, rusty, etc. may be present. Your contact persons in our company: Laedpfx Aortnm Ujm Nja Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, mileage: 19 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 3,390 kg, maximum load weight: 4,100 kg, overall weight: 7,490 kg, tire size: 205/75/R17,5, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 5,500 mm, loading space width: 2,480 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, - Fuso 7C18 new model with aluminium flatbed, length 6.1m. Chassis available on site, delivery time for completed vehicle 6 weeks - Note: Identical vehicle also available as 8.55t version rated down to 7.49t with loader crane available, (chassis, aluminium flatbeds, various loader cranes in stock!) - Air conditioning - Manual transmission - Spare wheel - Wheelbase: 4.3m–4.75m - LED front headlights - Permissible total weight: 7,490 kg, payload 4,000 kg (fully aluminium superstructure) - Ball hitch coupling, reversing camera available as option Ledpfx Ajyc Hansm Nsaa - Errors and prior sale excepted! - More information and XXL photos available on our website: - For inquiries in English please call ... - Air conditioning, climate control, VAT deductible, ABS, radio, onboard computer, heated mirrors, electric windows (front), electronic immobilizer, central locking with remote, power steering, rev counter, locking differential, outside temperature display, electrically adjustable mirrors, tachograph, spare wheel, cab: short cab, heat-insulating glazing, crane, new vehicle, emission standard: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/city/highway), available for rental, particulate emissions sticker: 4 - Green

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Ljdpfxjxwl Tze Am Nsaa Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm Lajdoxwl N Aepfx Am Nea - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm Lsdpexwlmusfx Am Neaa - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: used, mileage: 32 km, power: 90 kW (122.37 HP), first registration: 08/2025, fuel type: diesel, overall weight: 2,350 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 4,853 mm, total width: 2,100 mm, total height: 1,842 mm, loading space length: 2,001 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 25.X023161 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Driver Assistance Package 8 Plus: Trailer maneuvering assistant - Fixed tow bar incl. ESP trailer stability control - Partial autonomous driving Level 2 - KeyFree system with Ford Power start function - IACC with Stop&Go, active emergency brake assist - Blind spot assist incl. emergency braking function for reversing out of parking spaces - Exit warning - Pre-Collision incl. forward collision warning - Traffic sign recognition - Driver drowsiness alert - Lane keeping assist - Front and rear parking sensors - Rear view camera - Hill start assist - 10-inch touchscreen - DAB/DAB+ - Navigation - 10.25-inch digital instrument cluster - Android, Apple - 2 front USB-C ports - Voice control * Load compartment floor: hardwood with anti-slip coating * LED rear lights * LED headlights - automatic height adjustment - High beam assist * Programmable interface for body builders * Spare wheel: steel rim - Mechanical jack - Steel rim 6.5 x 17 with 215/55 R17 tires with 10-spoke wheel covers * Seat Package 56: Individually and variably heated driver and front passenger seat - Heated steering wheel - Driver and passenger seat 4-way manual adjustment - 2-way adjustable driver's lumbar support - Folding passenger seat with integrated work surface - Airbag package consisting of head and shoulder airbags as well as side airbags for driver and passenger * Fuel-operated parking heater, programmable via onboard computer ADDITIONAL FEATURES * ABS * Airbags for driver and passenger – passenger airbag deactivation * Alcohol ignition interlock (preparation) * Exterior mirrors foldable, adjustable, and heated * Hill start assist * Rubber floor covering, front * Onboard computer incl. outside temperature display * Overhead storage shelf, front * Roof rail preparation kit * Theft/alarm system with interior monitoring * Diesel particulate filter (DPF) with SCR catalytic converter and AdBlue tank * Double rear doors with 180° opening angle (without window) * ESP with traction control * Remote control: second remote control key for central locking – instead of conventional key * Heated windscreen * Glove compartment with lid * Front interior lighting with delay function * Cargo area lighting – 2 LED lights * Air conditioning with automatic temperature control (2 zones) for driver and passenger, individually adjustable * Height-adjustable headrests (2) * Load compartment floor: vinyl floor covering * Inductive charging station * Steering wheel: multifunction leather steering wheel * Steering column adjustable for height and reach * Air regulator with chrome accents * Fog lights with static cornering light * Upholstery: fabric * Tire pressure monitoring system * Wheels: tire repair kit * Windscreen wipers with rain sensor * Low beam: halogen headlights with daytime running lights * Headlight assistant with day/night sensor * Sliding door at rear right * High side wall cladding * Electromechanical power steering (EPAS) * Front seatbelts * Sun visors, driver and passenger – with mirror and ticket holder, not illuminated * Start-stop system Laedpfx Aexf R Tcom Nea * Dust and pollen filter * Socket: 12-volt – 1x front, 1x in load compartment * Daytime running lights * Full partition wall without window (steel) * Front door trim – with illuminated switches incl. door pockets for 1.5 L bottles * Electronic immobilizer (EPATS) * Central locking with remote control

Condition: good (used), Produkt: Bieffebi Typ: Mirage 309-180 Die Breite des Zylinders 1800mm Drucken Wiederholungsbereich: 230-1000mm Ungefaehre Geschossflaeche : 2,8 x 1 x 1,5 m Ungefaehre Gewicht: 1500 kg cca Kauf, Erwerb, Asset Management von Industrieanlagen und Maschinen. Ledpfx Amjcx N Dqj Noaa Breites Angebot an Gebrauchtmaschinen, Industrieanlagen

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 90 mm, total width: 555 mm, total height: 80 mm, total length: 1,450 mm, conveying length: 1,450 mm, construction width: 555 mm, construction height: 80 mm, empty load weight: 22 kg, TAF item number: 1000005918 Manufacturer: TAF Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,450 x 555 x 80 Width incl. side panel in mm: 555 Side height in mm: 70 Conveyor length in mm: 1,450 Conveyor width in mm: 500 Conveyor height in mm: 80 Roller pitch in mm: 90 Substructure: without (optionally available) Support roller axle type: spring axle Support roller diameter in mm: 50 Support roller per axle: 1 Support roller material: plastic Ljdpfx Aoyddu Ejm Neaa Drive: gravity Net weight in kg: 22 Condition: used / fully functional Function test: OK

Condition: used, maximum load weight: 33,960 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, 8 pairs of ALU stanchions / steel stools Exte D7 8 pairs of ALU stanchions and steel stool structure EXTE D7 Ljdpfsn Ryfajx Am Neaa

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please let us know your volume flow and we will select the right cyclone for you. Different versions available: - Legs, made of painted square steel profiles - Rotary valve and transition piece with inspection flap - Inlet box with non-return valve - Tangential outlet with/without pressure relief surface - Square diffuser with/without pressure relief surface - Sound insulation Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc. Functionality: The polluted air is tangentially fed into the cylindrical upper part is introduced, causing the air to rotate. The material is placed under the Influence of the centrifugal force in the direction of the cyclone circumference pressed out and led out through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located Outlet pipe on top. The deposition efficiency increases with the feed rate, but Laedpoftb Ebjfx Am Nsa also the pressure loss and thus the energy consumption. It is therefore it's important to find a good compromise. We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa can be selected. Operating pressure +/- 5

Condition: used, maximum load weight: 52,100 kg, overall weight: 70,000 kg, axle configuration: > 3 axles, first registration: 01/2009, next inspection (TÜV): 03/2026, loading space length: 24,400 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 2,500 mm, Equipment: ABS, Goldhofer Swan Neck Low Loader Ljdpfswta Dpsx Am Noaa * 5 axles, twin tires * Extendable low bed (8m) * 1st axle liftable * Last 4 axles forced steering * Hydraulic supports * Central lubrication system * BPW axles with drum brakes ---* Tires: 235/75 R17.5 * Permissible total weight: 70,000 kg * Unladen weight: 17,900 kg * Loading platform height: 0.85 m * Loading platform width: 2.55 m * Low bed length: 12.00 m - 20.00 m * Swan neck length: 4.0 m ---Vehicle number: 11037---Subject to errors and prior sale---Advertising and various markings have been digitally removed.---We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your requests and suggestions and we will take care of them. Among other services, we can offer you, for an additional charge, the following: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export handling * Mediation of financing * Application for export license plates * Vehicle transfer * Vehicle registration * Towing and vehicle transport ---Your VTS Team

Condition: used, maximum load weight: 52,100 kg, overall weight: 70,000 kg, axle configuration: > 3 axles, first registration: 08/2008, next inspection (TÜV): 12/2025, loading space length: 15,800 mm, total width: 2,550 mm, Equipment: ABS, Goldhofer Lowbed Trailer with Gooseneck - 5 axles - 1st axle liftable - Last four axles forced steered - Central lubrication system - BPW axles - Tyre size: 235/75 R17.5 - Drum brakes - Permissible gross weight: 70,000 kg Lsdpfx Ajw S S Uvjm Njaa - Unladen weight: 17,900 kg - Safety inspection due: TÜV due: 12/2025 - Loading height: 0.85 m - Loading width: 2.55 m - Lowbed length: 12.0 m - Gooseneck length: 4.0 m - Extendable up to 24.4 m total trailer length Errors and prior sale excepted. Internal vehicle number: 11177 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: used, Year of construction: 2017, Manfred Kaiser sorting grab Lsdpfx Amowwf Hds Neaa Year of manufacture: 2017 Mounting: MS 10 Cutting width: 1000 mm Weight: 1461 kg Errors and prior sale excepted. Internal vehicle number: 9125 WhatsApp support available! If you have questions about the machine or would like further information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: good (used), various counter bearing support blocks, rollers 5-fold adjustable for transverse and longitudinal rotation to relieve e.g. the welding rotary table or to transport pipes different versions Height adjustment in steps or stepless different heights The carriers themselves have a load capacity of up to 8 tons prices from 480.-€ to 850.-€ Lodpfxel Dwnlj Am Neaa

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, 3-box conveyor; three-part automatic stacked boxes. Board height: 17-27 mm Board length: 800-1200 mm Ledpswf Digsfx Am Njaa Board width: 80-160 mm Stacking up to 60 pcs/min

Year of construction: 1999, condition: excellent (used), WIDE BAND SANDMACHINE, 2 AGGENATES, CONTACT SHAFT AND SHAFT WITH COIL, SANDMACHINE Bottom drive shaft motor 15 kW, motor with coil 7.5 kW, smooth feed regulation Ljdpsgrdx Uefx Am Noaa