Used 3-Band Skinning Machine for sale (100,919)

Condition: good (used), 3 machine vices Goody. Gsdpfx Alorai Akjxoub

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Gusdpfxoudi Une Alxjb Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Year of construction: 1996, condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm metal sheet thickness: 1 mm upper roller-Ø: 60 mm below roller-Ø: 60 mm weight: 170 kg Godpfeb N Eu Iex Alxsub space needed: 560 x 1570 x 1080 mm

Year of construction: 1996, condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm metal sheet thickness: 1 mm Gjdpfx Alobpytpsxeub upper roller-Ø: 60 mm below roller-Ø: 60 mm weight: 170 kg space needed: 560 x 1570 x 1080 mm

Condition: used, abrasive belt measures: 50 x 100 Ø mm engine: 380 V, 0,7 kW space needed: 650 x 550 x 1050 mm Gedpfeb Tcv Hox Alxoub

Year of construction: 1998, condition: as good as new (ex-display), machine/vehicle number: 3163, working width: 1050 mm metal sheet thickness: 1,5 mm upper roller-Ø: 70 mm below roller-Ø: 70 mm weight: 320 kg space needed: 700 x 1300 x 1100 mm Gujdpobpythsfx Alxjb

Year of construction: 1997, condition: used, functionality: fully functional, We are offering this used contouring machine P. BACCI FC8-2500, year of manufacture 1997. Manufacturer: P. BACCI Model/Type: FC 8-2500 Serial number: 1346 Year of manufacture: 1997 Voltage: 380 V Frequency: 50 Hz Power: 30.5 kW Weight: 5100 kg Guedpsyx S Scofx Alxeb If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. Gjdpfx Asv R Tgtjlxoub The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: used, Year of construction: 2009, printing size 75x105cm, parallel lift, moving printing bed, with gripper system and belt delivery to the right, infinitely adjustable squeegee stroke, with pneumatic squeegee pressure control, screen frame insertion from the front, with pneumatic squeegee clamping, control panel with keyboard (useable on the left or on the right side), max. sheet size: 78x108cm, max. screen frame size: 120x140cm, additional with cleaning unit model TEKNEK, completely with 3sets squeegees and floodbars, connection: 380/400V, 50Hz, compressed air 6bar necessary. Used, year of construction: 2009, will partly be overhauled and will then be technically and optically in mint condition. Guodpfjyu Tu Ajx Alxeb

Condition: new, sheet width 1000 mm plate thickness 3,0 mm distance between columns 1050 mm diameter of upper rolls 90 mm Godsyv I Izepfx Alxoub total power requirement 1,1 KW weight of the machine ca. 0,47 t dimensions of the machine ca. 1,7 x 0,8 x 1,35 mm Sheet metal bending machine with custom dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swiveling top roller - Brake motor - Safety device: Emergency stop cord - Documentation in English - 400V

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Gujdpfew Dm Hrox Alxob

Condition: like new (used), functionality: fully functional, AUTOMATIC EDGE SANDING machine with 3 units , model TONELLI OTB.15 ( made in ITALY ) second hand machine working condition: Excellent, like new CE regulation: YES Voltage: 380/50 for sanding panel edges, on raw and painted edges, flat and shaped, solid, veneered, profiles, frames and various technical data: Gujdpeywzchjfx Alxeb electric working height adjustment minimum working height: mm.3 maximum working height: mm.100 minimum working width: mm.60 track feed speed adjustable from the control panel: from 5 m/min to 30 m/min track feed with rubber pads and adjustable rubber pressure wheels feed track motor power: 2 HP machine composed of 3 independent units: 1° Unit : Tilting oscillating sanding unit - Pneumatic pad - Motor 2 speeds Hp 1,9 / 3,3 - Automatic group entry - Belt cleaning blower 2° Unit : 45° oscillating sanding unit - Pneumatic pad - Motor 2 speeds Hp 0,6 / 1,2 - Automatic group entry - Belt cleaning blower 3° Unit : 45° oscillating sanding unit - Pneumatic pad - Motor 2 speeds Hp 0,6 / 1,2 - Automatic group entry - Belt cleaning blower Removable support for panel support Installed power: 10 kW Overall dimensions: 3600 x 1600 x 1600 mm Weight: 2000 kg

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 3115, functionality: fully functional, empty load weight: 2,000 kg, feed length X-axis: 2,000 mm, saw band length: 4,870 mm, saw band width: 32 mm, TECHNICAL DETAILS Bandsaw blade length: 4,870 mm Bandsaw blade width: 32 mm Bandsaw blade speed: 110 m/min Cutting capacity (round): 340 mm Max. feed length: 2,000 mm Gedoyuaz Nopfx Alxoub MACHINE DETAILS Control: Conventional Saw type: Automatic Horizontal/Vertical: Horizontal Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,850 x 1,800 mm Net weight: 2,000 kg Transport packages: 3

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (1 x Kw 5,2 ca.) N°2 Hogging Units (1 Top + 1 Bottom) DT 10 (2 x Kw 5,8 ca.)+ Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge control EC40) Godjywk Elspfx Alxoub Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (2 x Kw 0,3 ca.) 28 m/min (0° - 25°) Rough Trimming unit RS 10 (2 x Kw 0,75) Fine Trimming unit (Multi-profile, by N.C.) RF 30 (2 x Kw 0,37) 0°-25° Multi Function Unit (Profile contour Trimming unit) AR 30 (Kw 0,35 x 2) LEFT: 2 x Milling grooving units FB 32 (2 x Kw 5 ca.) 0° - 90° RIGHT: Milling grooving unit FB 30 (1 x Kw 5 ca.) 0° - 90° Profile Scraping unit RB 10 Glue scraping unit RC 10 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37) + Hot Air Heater (to reactivate the color of plastic tape) PH 10 OPTION: D.O.M. Unloader with load-bearing column and mobile arm (with vacuum suction cups), for unloading and stacking edged panels

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, quill stroke: 100 mm, For sale is an Emco tool milling machine, model FB-4. The machine was previously used exclusively for inter-company training purposes. Currently, two identical Emco FB-4 machines are still in stock. Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Year of manufacture: 2005 Control: Heidenhain ND-750 display Technical parameters: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Tool clamping: hydraulic • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle speed: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard cabin (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: ..1,485 x 1,500 x 1,700 mm Accessories: ----- Gusdpfjyvra Isx Alxjb • 4x machine leveling feet • Operating manual • Counter bearing for horizontal machining • Shaft for horizontal machining • Table enclosure (currently removed) • 10x SK-40 tool holders

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. Gedpfxoyv Da Ho Alxjub POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: used, Year of construction: 2011, sheet width 1270 mm plate thickness max. 4,5 mm Gusdpfxoyv Nq Ro Alxeb 4 mm roll diameter 120 mm roll speed 8 U/min min. bending diameter 180 mm total power requirement 2,2 kW weight of the machine ca. 1250 kg dimensions 2470 x 750 x 1000 mm

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, type of input current: three-phase, plate height: 50 mm, From business closure Type: IMA Compact 309 C Year of manufacture: 1992 For roll material and strips up to 9mm thickness - Gluing with hot-melt adhesive granulate - End trimming - Sawing - Flush milling - Scraper knives and buffing Guodpfxox Avcdo Alxsb Payment in cash upon collection. Private sale – no warranty.

Condition: reconditioned (used), Year of construction: 1997, Model: B1050 Year: 1997 Weight: 5,000kg AXES: 3 (X, Y, Z) CNC: FAGOR 8050M Characteristic: Table dimensions: 1200x500mm Routes (X, Y, Z): 1000x500x510mm Maximum weight on table: 500kg Rapid advance on X-Y axis: 25,000mm/min. Rapid advance on Z axis: 20,000mm/min. Work advance: 5,000mm/min. Head: ISO 40 Speed ​​range: 100-6,000rpm Maximum distance spindle to table: 650mm Gedpfohy Rdmjx Alxsub Automatic tool changer: 18 Selection type: Sequential Maximum tool diameter: 85mm (Between adjacent tools) Maximum tool diameter: 135mm (Between alternate tools) Maximum tool length: 250mm Maximum tool weight: 6kg Tool change time: 6 sec.

Condition: used, Year of construction: 2019, Year: 2019 Condition: operational - Still in production, inspection possible Configuration: - Automatic pallet exchange - When a pallet is completed, the system automatically ejects it to the side output and feeds a new pallet from the infeed track - Automatic sheet feeding and counting Gjdpeyv Eppsfx Alxeub - Automatic jogging and aeration - Automatic air removal from the pile - Automatic feeding into the airboard loader - Automatic loading of airboards - Automatic unloading of the pile onto a pallet, including airboards Basic functions of the BASA system: - Automatically loads materials from a pallet - The transport system allows sequential loading from 2 pallets arranged in line; the empty pallet is automatically ejected - Counts / deducts the exact number of sheets - Jogs, aligns, aerates, and presses the piles - Places jogged piles onto separator cardboard - Subsequently separates piles using an airboard - Unloads piles onto a pallet - The BASA system only requires an operator to input or select a job in the system and to supply full pallets and remove empty ones - In off-line mode, the system can “feed” 2–3 cutting machines depending on the material used and pallet loading quality Technical specifications: - Max. format: 770 × 1070 mm - Min. format: 700 × 650 mm - Sheet counter: GTS

Condition: excellent (used), Year of construction: 2016, I sell the fully equipped edge banding machine IDM Stefani Solution MDR T-ER4S, year 2016: Godpfx Asyw Aivslxjub Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Heating lamps Edge banding with preheating tank / AirFusion included Material pressure zone servomotoric adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotoric adjustable Corner rounding 4-motor servomotoric adjustable / Multiradius unit Radius R2 scrapers servomotoric adjustable / Multiradius unit Glue scrapers manual adjustable Polishing brushes Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 10-60mm Edge thickness 0,3-15mm Feeding speed up to 25m/min. PUR glue possible. FE-MA-TECH unit included Second glue tank absolutely new included. Only 344.000 meters edgenbanded ! Very good condition, fully working!

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Gjdpfjh U Nzpsx Alxoub Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2012, I sell the widebelt sanding machine SCM Sandya 16 S 110, year 2012. Configuration: 18,5 KW hard rubber cylinder 15 KW hard rubber cylinder 11 KW combi unit soft rubber cylinder + pneumatic jumping pad. Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2750kg Gedjihfawepfx Alxeub 3 motors 18,5 + 15 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Gjdpfx Alextxhkoxeub Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: good (used), Mosca RO-M Fusion 800×600 Banding Machine Gusdpfx Aljywdtcjxeb This machine is 100% operational and ready for production. Manufacturer: Mosca, Germany. Manufactured in 2019. This device is indispensable for shipping, for wrapping heavy parcels, such as leaflets or catalogs. A 5mm PP strap reinforces the packaging and creates a handle that makes it easy to grab and transport. Rotating control panel Adjustable tape feed length and tension 230V power supply Weight: 240kg