Used 5-Axis Center - Dmg Mori Hsc 20 for sale (82,147)

Condition: good (used), Year of construction: 2015, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, x-axis travel 635 mm y-axis travel 510 mm z-axis travel 460 mm Control system SLIMline Siemens Main spindle speed range 20 - 12,000 rpm Main spindle drive power 13 / 9 kW Torque 83 / 57 Nm Tool holder SK 40 Clamping surface of table 790 x 560 mm Number of T-slots 4 + 1 T-slot width 4 x 14H12 / 1 x 14H7 mm T-slot spacing 100 mm Max. table load 600 kg Table height above floor 720 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diameter with free adjacent slot 130 mm Max. tool length 300 mm Ljdpfoy Rzbwsx Akuorl Max. tool weight 6 kg Total tool weight approx. max. 60 kg Feed rate max. 20,000 mm/min Rapid traverse 30 m/min Total power requirement 17 kVA Machine weight approx. 4.0 t Space requirement approx. 4.5 x 4.0 x 2.8 m ICS 12 bar Chip conveyor Preparation for 4th axis (rotary table)

Condition: good (used), Year of construction: 2017, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, 5-axis machining center DMG MORI CMX 50 U including robot Year of manufacture: 2017 Control unit: Siemens Operate Technical Data Travel paths: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110° C-axis: 360° Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Drive power – main spindle (100/40% duty cycle): 13 / 9 kW Worktable: Table size: Ø 630 x 500 mm Tool changer: Number of tool stations: 30 positions Feeds: Rapid traverse (x/y/z): 30 m/min Operating hours: Spindle hours: Technical features & accessories: - Direct absolute measuring system in x, y, and z, including air purge - Blowing air switching via M-function - Production package, consisting of: • Internal coolant supply 12 bar • Chip conveyor, tank 250 L • Enclosure roof • Tool changer door can be opened Lsdsy Ry N Tepfx Akuerl • Signal lamp • Touch probe PP40 • Tool measurement TS27R • Tool breakage monitoring Robot ROBOJOB Type: Mill-Assist-E Year of manufacture: 2018 Spindle bearings replaced in autumn 2025.

Condition: used, Year of construction: 2023, Lathes Travel distance X: 495 mm Travel distance Y :125 mm Travel distance Z: 1560 mm turning length: 1540 mm max. turning diameter: 660 mm max. circulation diameter: 660 mm spindle boring: 65 mm range of revolutions till: 5000 rpm powered tools B-axis: ±120° Tool spindle speed: 12,000 rpm Tool magazine: 38 tools Lredpfxsy Nxc Ae Akuel Machine weight: 18,800 kg Condition: rarely used, like new

Condition: ready for operation (used), Year of construction: 2013, operating hours: 31,460 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operating mode 4: machining process control (work with open work area door allowed) • Repairs/maintenance: • C-axis seal replaced just after warranty (improved version) • Spindle replaced (05/2021) • Machine measured last year – circular interpolation (Ballbar) within tolerance • Typical use: • Duralumin machining 80% overall • 3-axis: 50% • 5-axis: 40% (up to 10% 5-axis continuous) Additional equipment • Measuring probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electric handwheel • Rinsing gun • Chip conveyor Lodpfxjyt Rdrj Akujrl • 70-80pcs HSK 63 tool holders (various assemblies) including several end mills, T-mills, 2x sets of KAISER turning heads, JAGER 60,000 rpm electrospindle and more. Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2015, operating hours: 11,223 h, spindle speed (max.): 20,000 rpm, total height: 800 mm, table width: 650 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It features an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 MonoBlock universal machining centre we have for sale. Contact us for further details. • 5-axis simultaneous machining • Spindle taper: SK 40 • Tool magazine: 60 positions • Internal coolant supply: 40 bar • Spindle Hours: 11,223 h • Machine on hours: 32,851 h • A-axis Range: +/- 120 degree Ljdsy Ndg Topfx Akuerl • C-axis Range: 360 degree • Table: Integrated CNC rotary table (diameter 650 mm) within an 800 x 650 mm table surface • Clamping: Hydraulic clamping for the swivel rotary table • Probing: HEIDENHAIN touch probe • Chip Management: Chip conveyor • Coolant: Internal Coolant Supply (ICS / IKZ) 40 bar • Coolant Tank: 600-liter capacity with paper band filter • Cleaning: Wash-down gun (spray pistol) • Extraction: Extraction unit (mist collector) • Table type: Integrated swivel rotary table Additional equipment • Infrared measuring probe • Electronic handwheel • Chip conveyor • Internal coolant supply system with paper band filter • 3D Quickset preparation • Coolant ring nozzle • Air blast • Operating Mode 4 (BA4) • Safety glass window • DMG Netservice client • Optional: approx. 80 tools available Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: excellent (used), Year of construction: 2022, operating hours: 1,450 h, machine/vehicle number: 0031001080A, This 3-axis DMG MORI CLX 450 V3 was manufactured in 2022, i have been the only owner since new, I am not a dealer! It features a maximum turning diameter of 400 mm and a Z-axis travel of 600 mm. The machine is equipped with a powerful spindle capable of 4000 rpm and includes 12 driven tool stations for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V3 horizontal turning machine we have for sale. Contact us for further details. • Version: V3 (no Y-axis); configured for turning + milling (C-axis) • Working area: • Swing over bed: 650 mm • Swing over cross slide: 465 mm • Max. turning diameter: 400 / 315 mm • Rapid traverse X/Z: 30 / 30 m/min • Axes: X, Z, C; C-axis positioning accuracy: 20 arcsec • Main spindle: • Spindle nose: A2-8 Ljdpsy Rfbzofx Akuorl • Bar capacity: 80 mm • Front bearing diameter: 130 mm • Chuck diameter options: 210 / 250 / 315 mm • Spindle power (40% / 100%): 25.5 / 17 kW • Max. torque (40% / 100%): 426 / 283 Nm • Turret (VDI 40): • 12 stations (12 driven) • Tool station diameter: 40 mm • Driven tool power: 5.44 kW • Driven tool torque: 20 Nm • Driven tool max speed: 4000 rpm • Tailstock: • Travel: 500 mm • Center interface: MK5 • Max. force: 8 kN • Guideways / Ballscrews: X/Z 40 × 10 mm • Accuracy: Positioning accuracy X/Z: 5 / 10 µm • Capacity / Workholding: • Max. bar capacity: 80 mm • Hydraulic chuck: Ø 254 mm (installed) • Chuck bore: 82 mm • Coolant & chip handling: Coolant gun 5 bar; Chip tank • Control: Siemens SLIMline multi-touch (19") • Dimensions & weight: • Weight without chip conveyor: approx. 4950 – 5050 kg • Weight with chip conveyor: approx. 5500 kg • Notes: Full 12 driven tool stations Additional equipment • Chip conveyor (right-side discharge) • Hydraulic tailstock (M-function controlled) • Direct measuring system (X-axis) • External electronic handwheel • DMG MORI IoTconnector • Marposs tool probe • Signal tower (4-color) Dkec Tccdvjyzq T Ro Uel • Set of static tool holders VDI 40 • Set of driven tools WTO (QuickFlex, ER32) Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, Equipment: chip conveyor, MACHINING CENTER DMG MORI DMC 650 V Year: 2017 Manufacturer: DMG MORI Model: DMC 650 V CNC Control: Celos with Siemens 840D Machine dimensions: 4725 x 5090 x H 2670 mm Weight: 5,900 kg AXIS TRAVELS X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Rapid traverse: 42 m/min Feed rate: up to 42,000 mm/min SPINDLE speedMASTER Spindle speeds - Continuously programmable: up to 20,000 rpm - In setup mode: 800 rpm Motor power - Max. drive power (40% duty cycle): 35 kW - Rated power (100% duty cycle): 25 kW Torque - Max. spindle torque (40% duty cycle): 130 Nm - Rated torque (100% duty cycle): 86 Nm Tool holder: SK40 Tool clamping force: 11.2 kN TABLE Table size: 960 x 570 mm T-slot spacing: 100 mm Number of T-slots: 4 / 14H12 Reference slot: 1 / 14H7 Max. table load: 800 kg Loading height (floor to table top): 800 mm 4TH AXIS – NC ROTARY TABLE MORI SEIKI DDRT 200X Center height: 140 mm Table diameter: 200 mm Center hole diameter: 65H7 mm Clamping surface diameter: 50 mm Clamping slot: 14h6 mm Clamping torque: 600 Nm Max. torque: 280 Nm Rotational speed: 150 rpm Positioning time: 5 s Repeatability: 3 s Max. workpiece diameter: 250 mm Max. speed: 200 rpm Load capacities - Max. clamping weight (one-sided): 102 kg - Max. vertical load: 100 kg - Max. vertical load with tailstock: 250 kg - Max. horizontal load: 250 kg Weight of NC rotary table: 115 kg TOOL MEASUREMENT – TT160 Probing accuracy: < 15 µm Max. deviation of measuring element: 5 mm Axial triggering force: 8 N Radial triggering force: 1 N Max. probing speed: 5 m/min Protection class: IP67 (EN 60529) Lsdpfx Akjy Nkcnouorl Working temperature: 10–40°C CHIP CONVEYOR WITH COOLANT EXTENSION SYSTEM Coolant tank capacity: 230 l MACHINE COOLING UNIT Effective cooling capacity: 4.5 kW Cooling circuit pump: 40 l/min Refrigerant: R 134a Coolant: Water - Antifrogen® L 70/30 % Coolant filling volume: 38 l Coolant discharge temperature: +15° to +30°C Permitted ambient temperature: +10° to +45°C Unit weight (dry): 130 kg Additional Information Operating hours: approx. 2,200 20-position tool magazine Machine supplied with manuals and CE certificate of conformity All technical data provided are for reference only and subject to change without notice, and therefore are not legally binding.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe DMG CLX 450 V3, year 2018, Siemens Slimline control C-axis with driven tools Sauter turret with 12 positions VDI40 Chuck 250 mm Spindle bore 80 mm X-axis travel: 267 mm Z-axis travel: 600 mm - Measuring probe - Parts catcher - Tailstock - Chip conveyor - Documentation - 3 driven tool holders included with the machine Lrjdox Hqh Sepfx Akuel Cutting hours: 4,600 hours Very good condition

Condition: good (used), Year of construction: 2014, DMG MORI DMU 50 Technical Features of this 5-axis machining center Manufacturer: DMG Model: DMU-50 Year: 2014 3D CNC Control: HEIDENHAIN ITNC530 SMART NC Screen Type: DMG ERGOLINE® CONTROL 19” NC Swivel Rotary Table Simultaneous: INCLUDED Table Surface: 630×500 mm Max Weight Allowed on Table: 250 kg / pallet Turning Table (C Axis): 0.001º (±360º) Axis: Longitudinal Traverse (X Axis): 500 mm Cross Traverse (Y Axis): 450 mm Vertical Traverse (Z Axis): 400 mm Rapid Feed (X/Y/Z Axis): 42,000 mm/min Working Feed (X/Y/Z Axis): 10,000 mm/min Tilting Range (B Axis): -5º/+110º Spindle: Spindle Speed: 10,000 r.p.m. Taper: SK40-DIN 69871 Main Motor Power: 25 kW Automatic Tool Changer (ATC): ATC Positions: 60 Max Tool Length: 300 mm Equipment: Chip Conveyor: INCLUDED Active Control Cabinet Cooling: INCLUDED Tool Touch Probe: INCLUDED Direct Measuring System: INCLUDED Flushing Gun: INCLUDED Portable Handwheel: INCLUDED Suction System: INCLUDED Internal Coolant: INCLUDED Ledpfx Akjy Smyneuorl Coolant Deposit with Paper Filter: INCLUDED Others: Machine Dimensions (L x W x H): 5,100 × 3,200 × 2,750 mm Total Power: 27 kVA Machine Weight: 4,500 kg Price on request

Condition: good (used), Year of construction: 2016, Contact us for more information Lredpfsy Enr Ssx Akuol

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details. • Total hours: 64274 h; Operating hours: 43196 h • Counter spindle: 17 kW; max speed 5000 rpm; max bar diameter 45 (65) mm • CNC controlled axes: • X1: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z1: stroke 678 mm; rapid 30 m/min; acceleration 5 m/s2 • Y1: stroke 80 (+50/-30) mm; rapid 30 m/min; acceleration 5 m/s2 • X2: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z2: stroke 640 mm; rapid 30 m/min; acceleration 5 m/s2 • W2: stroke 690 mm; rapid 30 m/min; acceleration 5 m/s2 • Turrets: 2; 12 driven positions per turret; Tool system VDI 30; Max driven tool speed 4000 rpm • Coolant system: tank approx. 650 l; pump capacity per turret 20 l/min; pressure 7 bar • Power supply: 91 kVA • Base machine configuration and functions: • Drive for slide 1 and 2 (all 12 positions) • C-axis for main and counter spindle • Y-axis for slide 1 • Counterspindle collet cleaning with coolant • Mechanical preparation for oil mist filter • Electrical and software interface for bar loader • Angular synchronism between main and counter spindle • Automatic machine shut down • 2 additional on/off outputs (4 M-functions) • Rigid tapping • Piece and time counter • Software for polygonal turning (slide 1 and 2) • Constant cutting speed • Helical interpolation (slide 1) • Spindle speed control • Quadruple warning light • Cooling device for electrical cabinet • Control options: • Tool wear monitoring system (FANUC monitor) • Sister tool selection system (FANUC monitor) Additional equipment • IEMCA MASTER 865 MP 43 L bar feeder • Swarf (chip) conveyor, belt type • Workpiece unloading device including belt • Main spindle collet chuck MPF 65/140 (no axial feed), max Ø 65 mm • Manual collet changer SACO MPT65/140 and MPF65/140 • Counter spindle chuck SMW 175-BBD, incl. adapter Lrsdjy E Ntkspfx Akuol • 1 set of soft jaws for SMW 175-BBD • Differential clamping pressure for counter spindle (two selectable pressures) • External flushing of jaws/collets with coolant on main and counter spindle • Various new spare parts available Technical Specification Counter Spindle Yes

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotary table diameter: 1,700 mm, rotational speed (max.): 10,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Universal Machining Center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Tool stations: 60 Ljdpfx Aksxuqn Sjujrl NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe Electronic handwheel

Condition: used, Year of construction: 2013, operating hours: 5,045,526,670 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, nominal power (apparent): 67 kVA, torque: 236 Nm, controller manufacturer: Siemens, controller model: 840D solutionline Operate, rotational speed (max.): 10,000 rpm, overall weight: 9,700 kg, spindle speed (max.): 10,000 rpm, coolant supply: 40 bar, spindle motor power: 42,000 W, spindle nose: HSK-A 63, number of slots in tool magazine: 180, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, We are offering this used DMG MORI DMC 65 H duoBLOCK horizontal machining center, year of manufacture 2013. Model: DMC 65 H duoBLOCK Control: Siemens 840D solutionline Operate Serial number: 11710004283 Year of manufacture: 2013 Max. spindle speed: 10,000 rpm Weight: 9,700 kg Connected load: 67 kVA Max. input current: 97 A Rated current: 125 A Nominal voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V Additional options: Spindle: HSK-A 63, 42 kW / 236 Nm Taper cleaning station Tool magazine: chain type, 180 positions Tool breakage control Coolant system 980 liters, paper band filter, internal coolant supply 40 bar Blow air also through spindle Rotary pallet magazine including 12 machine pallets (4x 630x500 mm; 8x 500x500 mm) Power-on hours: 50,688 Spindle hours: 26,688 Ledpfxsy E E N Ue Akujrl The machine can be inspected under power. If you have any questions or need more information, please feel free to send us a message.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, DMG CMX 50 Year of manufacture: 2023 Spindle hours: approx. 1,300 h Spindle: 15,000 rpm inlineMASTER Tool holder: SK40 Tool stations: 30 slots Control: Siemens 840D sl X travel: 500 mm Ljdpsy Em Ursfx Akuerl Y travel: 450 mm Z travel: 400 mm Weight: 4,700 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,770 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, Attention – Images of milling accessories belonging to other machines were mistakenly included in this auction listing and have now been removed. Please refer to the updated scope of delivery as per the current images – approximately half of the accessories shown pertain to this machine. TECHNICAL DETAILS Working Area Swing diameter over bed max.: 920 mm Swing diameter over cross slide max.: 742 mm Max. turning length: 705 mm Bar capacity: 80 mm Travel X-axis: 260 mm Travel Y-axis: 50 mm Travel Z-axis: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inch Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inch Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Shank cross-section: 25 mm Max. speed of driven tools: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Operating hours: 2,770 h Power-on hours: 10,820 h Dimensions & Weight Machine height: 2,000 mm Installation footprint: 3,347 x 2,106 mm Weight: 5,820 kg EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Lodpfxey A Nf Ie Akusrl Parts catcher Workpiece ejector Interface for bar loader

Condition: excellent (used), Year of construction: 2017, CNC Turning and Milling Center DMG Mori CTX gamma 1250 CT (Year 2017) Available from March 2027 Base Machine - CTX gamma 1250 CT with turning length 1,250 mm - Main spindle as integrated spindle motor (ISM102) - Drive power: 35/45 kW (100/40% duty cycle) - Speed: 4,000 rpm - Partial hollow clamping device (hydraulic) - Draw tube inner diameter: 104 mm, depth: 848 mm - C-axis and hydraulic spindle brake - Chuck flushing device on main spindle (external) - Upper cross slide with turning/milling spindle as motor spindle: - Speed: max. 12,000 rpm - Power: 27 / 36 kW (100% / 40% duty cycle, 2 min) - Torque: 160 / 220 Nm (100% / 40% duty cycle, 2 min) - Hydraulic clamping during turning - Tool interface: HSK-A 63 DIN 69893 - Y-axis: ±210 mm - B-axis: ±120°, torque motor - Tool disc magazine: 36 positions - NC tailstock with supported, hydraulically movable quill and fixed center - Absolute, direct linear measurement systems in X-, Y-, and Z1-axis - Coolant pump: 6 bar, 20 l/min, fabric filter, filter fineness 100 µm - Cooling system for spindle motors, motor unit, turning/milling spindle, and B-axis torque motor - Control: CELOS® with Siemens 840D sl Operate and ShopTurn 3G Control & Operation - CELOS® with Siemens 840D solutionline Operate including 21.5" ERGOline® Control with multi-touch display - APPs for simplified machine operation - Comprehensive management, documentation, and visualization of order, process, and machine data - Networking with CAD/CAM and compatibility with PPS/ERP Enhanced Equipment - Tool chain magazine: 120 positions (instead of 36-position disc magazine) - Tool interface: HSK-A 63 DIN 69893 - Mechanical oil mist separator - Capacity: 1,100 m³/h, filter class H13 - 4-color signal lamp - "BLACK" design variant Ledpey A Hq Iofx Akusrl - Work area door, front panel, and front window frame in deep black - Tropical package for ambient temperatures up to 40 °C - Includes control cabinet cooling unit - Energy measuring device - 3D data model of machining area (STEP & IGES) – supplied on CD - Electrical Profibus interface for 6-axis robot - (Only with Siemens control) Special Equipment / Options - Grinding preparation (using CBN cup tools), consisting of: - Shortened grease lubrication cycle - Plug sealing in draw tube - Flushing of Z1/X1 telescopes during machining - HT 2 control hand unit - Jog mode, creep mode, and incremental adjustment via handwheel - Integrated emergency stop function and feed override - Tailstock with increased feed force (20 kN) Hydraulically actuated double-piston chuck Forkardt OZRDI 150, consisting of: - Integrated pressure converter - Piston rod clamping - Stroke monitoring unit with switching cone for clamping piston Ø150 mm - Maintenance-free 5-channel oil supply - Safety valve system for clamping piston Ø150 mm Condition The machine has been regularly serviced by DMG Mori customer service and is in technically flawless condition. An inspection under power or during ongoing production is possible. Dimensions & Weight - Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg - Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg - Total weight including accessories: approx. 22,605 kg - Number of packages: 11 - Loading meters: approx. 21 The complete equipment and further technical data are available in the documentation, which we are happy to provide upon request. Disassembly, removal, shipping, and recommissioning can be organized.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 42,222 h, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details. Control system: CNC 310 isTotal hours: 61295 hOperating hours: 42222 hMain spindle power 20/25 kWCounter spindle power 17 kWMax. main spindle speed: 5000 rpmMax. counter spindle speed: 5000 rpmMax. main spindle bar diameter: 65 mmMax. counter spindle bar diameter: 45 (65) mmCNC CONTROLLED AXESStroke X1 165 mmRapid speed X1 30 m/minAcceleration X1 5 m/s2Stroke Z1 678 mmRapid speed Z1 30 m/minAcceleration Z1 5 m/s2Stroke Y1 80 (+50/-30) mmRapid speed Y1 30 m/minAcceleration Y1 5 m/s2Stroke X2 165 mmRapid speed X2 30 m/minAcceleration X2 5 m/s2Stroke Z2 640 mmRapid speed Z2 30 m/minAcceleration Z2 5 m/s2Stroke W2 690 mmRapid speed W2 30 m/minAcceleration W2 5 m/s2Number of turrets 2Number of rotating tools each station 12 all driven positionsTool system VDI 30Max driven tool speed 4.000 rpmApprox. coolant tank capacity 650 lCoolant pump acity (per each turret) 20 l/minPump pressure 7 barPower supply 91 kVALxWxH of the machine 4.500x1.990x2.300 mmApprox. machine weight 9.500 kgIEMCA MASTER 865 MP 43 L (4m) bar feederBase machine configuration:- Drive for slide 1 and 2 (all 12 pos.)- C-axis for main and counter spindle- Y-axis for slide 1- Swarf conveyor belt type- Counterspindle collet cleaning with coolant- Workpiece unloading including belt- Mechanical preparation for oil mist filter- Electrical and software interface for bar loader- Angular synchronism between main and counter spindle- Automatic machine shut down- 2 additional on/off outputs (4 M-functions)- Rigid tapping- Piece and time counter- Software for polygonal turning for slide 1 and 2- Constant cutting speed- Helical interpolation for slide 1- Spindle speed control- Quadruple warning light- Cooling device for electrical cabinetAdded options:I-V50011 Collet chuck Type "MPF 65/140" without axial feed for main spindle max. diameter: mping elements and other equipment:I-V50025 Manual collet changer type "SACO MPT65/140 and MPF65/140"I-V50092 Differential pressure for counterspindle, possibility of setting two different clamping pressures.I-V50083 1 set of soft jaws for chuck type "SMW 175-BBD"I-V50080 Chuck type "SMW 175-BBD" For counter spindle, including adapter for adapting the spindleI-V60050 Tool holder for drilling tools with internal cooling and cylindrical shank Ø 32mm,with clamping shank according to DIN 69880 (VDI 30) - 4pcsI-V60010 Radial tool holder for external machining type C1 with clamping shank according to DIN 69880 (VDI 30) - 5pcsControl system options:I-V12060 Tool wear monitoring system Monitor for CNC FANUCI-V12070 Sister tool selection system for Tool Monitor for CNC FANUCHydraulic and filtration equipment:I-V40045 External flushing of jaws/collets with coolant on main spindle and counter spindleSpecial optionsSK001 Special clamping device with mandrel for counter spindle product HAINBUCH AXFIX 811 including 2 colletsVarious new spare parts are included. Ljdpfsy Au Uujx Akusrl Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2014, condition: excellent (used), DMG PH 150-8 . year of construction 2014 . with pallets . Touch screen . plant in very good condition . Lrodoin Dkljpfx Akujl

Condition: used, Year of construction: 2022, operating hours: 10,014 h, functionality: fully functional, machine/vehicle number: 00340000910, turning length: 1,290 mm, turning diameter: 640 mm, spindle motor power: 46,000 W, spindle speed (max.): 2,000 rpm, spindle bore: 95 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, workpiece weight (max.): 1,200 kg, feed force X-axis: 9,500 N, feed force Z-axis: 15,500 N, Equipment: documentation/manual, Technical data in the attachment. Lrsdsy Emx Ropfx Akusl

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes replaced; major maintenance package carried out approx. one year ago (machine has not been in operation since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar capacity: 80 mm Mounting: MT5, revolving tailstock Without center Turret: 12 stations, bolt-on turret Overhang for driven tools: ±100 mm Assemblies: Integrated MK4 bearing for live center Chip and coolant system: Scraper-type chip conveyor with magnetic separator, discharge height approx. 1,000 mm Coolant system: high pressure 5 bar, pump 800 W, delivery rate 20 l/min Coolant shower at chuck, including high-performance pump Compressed air blow-off system for tool holder sleeves Compressed air blow-off system for tailstock live center Line filter for coolant system MACHINE DETAILS Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal beacon: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for portal robot DMG Mori Seiki Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without a chuck, tool pre-setter, or workholding devices. Lrjdsy A Icropfx Akujl

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The machine can be used as a fully-fledged universal machining centre! We offer you: Manufacturer: DMG MORI Type: Lasertec 125 3D Hybrid Year of manufacture: 2019 Control: Celos with Siemens 840D sl Operate Technical specifications: Travels: X-axis: 1,335 mm Y-axis: 1,250 mm Z-axis: 900 mm Rotary range: 360° Swivel range: +/- 120° Main spindle: Max. speed - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Max. torque: 130 / 86 Nm Rotary table: Table diameter: C-axis 1,250 x 1,000 mm, integrated in fixed table 1,400 x 1,000 mm Max. table load: 2,000 kg Tool changer: Tool holder: HSK-63A Number of tool stations: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 500 mm Tool change time (chip-to-chip): 6.5 sec Feed rates: Rapid traverse: 40 m/min Laser specification: Laser type: Fibre-guided diode laser Power: 2,500 W Fibre diameter: 600 μm, NA 0.22 Wavelength: 1,030 +/- 10 nm Focal length: 200 mm Beam quality: 66 mm mrad Power stability: max +/- 2% (2h) Incl. pilot laser: 600 – 700 nm Operating hours: approx. 4,500 h Spindle hours: approx. 1,910 h Technical features & accessories: - Automated changing of the laser processing head for laser deposition or milling operations - Production package, consisting of: - Scraper-belt chip conveyor - Coolant system, 600 l tank - Paper band filter - High-pressure coolant (IKZ) 40 bar - Chip rinsing in the work area door - Rinse gun, 3 bar - Oil and emulsion mist extraction system - Blown air cooling device through spindle centre - Infrared probe, make Renishaw PP60 optical (OMP60) - Tool measurement in the work area, make Blum Laser - Preparation for 3D quickSET - MPC – Machine Protection Control - 4-color signal lamp - Optical powder feed rate sensor - Automatic work area door - Grating footboard - Laser, consisting of: - Processing optics with focusing lens - Focal length 200 mm - Processing nozzle for 3 mm spot diameter - Water-air chiller for laser and processing head - Second collimation optic for 1.6 mm laser spot diameter - Alignment camera for laser/nozzle adjustment - incl. adaptive process control - incl. extraction system with post-filter stage - Active laser safety window Lrjdpfx Aksyz Si Touel - Extended powder feeder, consisting of: - Twin system (dual-channel material feed) - Material capacity (2x): 5 l, feed rate: 0.5 – 15 g/min - 2x mass flow controllers for consistent material build-up - Automatic switching or mixing via simultaneous operation of both powder containers by NC commands - Powder monitoring and laser camera - Electronic handwheel - DECKEL MAHO MDynamics package - ATC (Application Tuning Cycle) - Safety package for power failure Accessories, depicted tools and clamping devices are included in delivery only if specified in the additional information. Modifications and errors in technical data and details, as well as prior sale, are subject to change!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer you the following: Manufacturer: DMG MORI Model: DMC 65 monoBlock with RS 3 Automation Year of manufacture: 2018 Control system: Heidenhain TNC 640 Technical specifications: Travel paths: x-axis: 735 mm y-axis: 650 mm z-axis: 560 mm Main spindle: Speed range: 0 – 15,000 rpm Drive power – main spindle (100/40%): 21 / 16 kW Table dimensions: Pallet size: 500 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Operating hours: approx. 61,000 h Spindle hours: approx. 19,900 h Technical features & equipment: - Vertical spindle head - ICS, 40 bar - NC rotary tilting table with pallet carrier - 3 pallets - Linear pallet changer, DMG Mori RPS 3 - Coolant system, 500 l tank - Chip flushing in the work area door - Chip conveyor with integrated band filter - Coolant ring nozzle - Rinsing gun with pump, 2 bar / 40 l/min - Air blast cooling through spindle center - 3D quickSET expansion package - Operating mode 4 - Electronic handwheel Accessories, depicted tools, and clamping devices are only included in the scope of delivery if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale! Lodpfx Akeyzz Ewjuerl

Condition: excellent (used), Year of construction: 2012, Technical specifications: 5-axis machine: X, Y, Z, C, B Travel distances (X/Y/Z): 500 / 450 / 400 mm Travel range B axis: +110/-5° Travel range C axis: 360° CNC control: SIEMENS 840D Table width: 500 mm Table diameter: 630 mm Table angle adjustable in degrees Max. workpiece weight: 200 kg Number of tool changer positions: 30 Spindle speed: 20 – 10,000 rpm Motor power: 13 kW Dimensions (L x W x H): approx. 3400 x 2550 x 2200 mm Machine weight: approx. 4.8 t Additional equipment: Workpiece measuring probe Chip conveyor Lodpfx Aksyzzpvsusrl Condition: Very good condition, little used, approximately 12,850 operating hours

Condition: ready for operation (used), Year of construction: 2021, operating hours: 14,400 h, spindle motor power: 13,000 W, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn 3G, number of axes: 3, This 4-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine. Additional equipment • CELOS Products • DMG MORI Service Agent • DMG MORI NetService • DMG MORI IoT Connector • DMG MORI Messenger V2 SERVICE Camera • Tail Stock • the 2 SMW-Autoblok BBD17/52 which can also be seen on the machine chuck. Ledpfx Akjyz Al Soujrl • and the addition of the software (tccentric turning and milling cycle, as well as a deburring toothing cycle). Machine Benefits Technical Machine Benefits • Hydraulic cylinder with Ø52 mm through-hole • 12-position sauter turret • Vdi 30 tool mounting (din 69880-30) • Live tool interface (din 5480 standard) • Direct measuring scale on the x-axis • Tool system for turret: trifix® system (din 69880, vdi 3425, din 5480) • Y-axis: ±40 mm travel Extra Information Main Spindle Chuck SMW-Autoblok BBD 170/52 Counter Spindle Chuck SMW-Autoblok BBD 175/52 Counter Spindle Option Programmable tailstock force: Adjustable between 80-300 daN Media Coolant filtration: Dual-cartridge filter (50 μm) Coolant cleaning: External flushing system for spindles Coolant tank with 6-bar pump Automation Bar machining package: Fully hydraulic cylinder Ø52 mm Workpiece catcher with conveyor for parts Ø51 × 185 mm (max 3 kg) 4-color operating mode signal light Bar loader interface compatible with IEMCA, Breuning IRCO, LNS

Condition: excellent (used), Chip conveyor for DMC 635 V including pump Lrjdpfx Ajyz Iicokusl