Used Agie Charmilles Cut 400 for sale (29,854)

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Lhodpfxev Dkvro Akyoh Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Lhjdpfx Aox Uxgljkyeh Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, quill stroke: 250 mm, AGIE Spirit 2 Year of manufacture: 2005 APG FORM Control Travel paths: X = 300 mm, Y = 250 mm, Z = 250 mm Ledpfjxt N Hkjx Akyshh Max. workpiece size: X = 500 mm, Y = 400 mm, Z = 185 mm Max. workpiece weight: 200 kg Max. electrode weight: 25 kg Distance table – chuck: 190 – 440 mm AGIE APG Spirit Generator – Working current 80 amperes Best achievable surface finish Ra 0.2 µm Including pneumatic chuck Erowa ITS 50 or 3R (at your choice) Including 4-position electrode changer in the magazine Net machine weight: 1,280 kg Machine dimensions (L x W x H): 1850 x 2100 x 2360 mm The machine will be cleaned, serviced, and subsequently tested after receipt of order. We are happy to commission the machine for you as well.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Travels (X/Y/Z): 350 x 250 x 256 mm Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Lhedpfx Akewqcm Usyoh Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine will be cleaned, overhauled and tested by us upon receipt of order. We are also happy to offer commissioning and training.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, Charmilles Roboform 350 Year of manufacture: 2007 C-frame sinker EDM machine Fixed table with lowering tank Travel (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Including pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (choice of one) Maximum electrode weight: 50 kg Without electrode changer Charmilles DPControl operating interface Operation via 12" LCD color touchscreen Keyboard and hand pendant also available Machine dimensions: 1900 x 1690 x 2522 mm Total weight: 2800 kg The machine will be cleaned and serviced by us upon receipt of order. Afterwards, an EDM test will be performed. Lhsdpsyu N Skjfx Akyjh We are happy to commission the machine at your site and provide operator training. Optional: - Transport - Cooling unit - Dielectric fluid - Clamping devices

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Year of manufacture: 2005 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Lodpfxsgzv Sce Akyjhh Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from one side) Includes AGIEJOGGER handheld control box for convenient setup AGIE IPG high-performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be completely overhauled and thoroughly tested by us. You will receive a 6-month warranty on the machine. We would also be happy to offer you commissioning and training.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, WE OFFER AN NICE CONDITION EDM FROM SWITZERLAND Description - INCLUDING COMPLETE TOOLINGS AND ACCESSORIES - DOCUMENTATION - WE ORGANIZE FOR CUSTOMER AS WELL TRANSPORT Specifications Manufacturer CHARMILLES Model D20 Condition Used Stock Number 0075 Longitudinal axis (X) 250 mm Transversal axis (Y) 150 mm Axis (z) 150 mm Lodpjvk Nbasfx Akyshh Work tank dimensions 530 x 380 x 330 mm Isopulse 80 generator Material removal rate for the copper electrode (+ve) 150mm3/min at 35 amps Best surface finish 0.7 micron

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, WE OFFER AN NICE CONDITION SAW PEGAS AND GONDA HERKULES X-CNC 350X 400 with rollers and many new reserve blades MACHINE WAS USING IN FURNITURE PRODUCTION FOR CUTTING METAL TUBES FOR CHAIRS AND OTHER FURNITURE WITH MACHINE INCLUDED A LOT SPARE BLADES, RAILS CONVEYOR FOR WASTE Lsdpsvznkbsfx Akyehh WHEN MACHINE CLEANED WILL LOOKS AS NEW. WE CAN ORGANIZE FOR CUSTMER ALSO TRANSPORT WOLDWIDE

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, WE OFFER AN VERY GOOD CONDITION OKUMA MU 400 VA WITH NEW SPINDEL ON 2022 INCLUDED COMPLETE EQUIPMENT AND FULL TOOLINGS INSIDE TOOLCHANGER. MACHINE - Okuma MU400VA 5 AXIS CNC Vertical Machining Centre (2006) Description: Main Drive Spindle speed range 15000 RPM Spindle motor power (10min/cont.) 22.5/18.5 kW Tool taper BT40 BIG+ Movement X-Axis Movement 762 mm Y-Axis Movement 460 mm Z-Axis Movement 460 mm 1-AXIS Movement +20/-110 Lhsdpfx Aovmithokyoh 2-AXIS Movement 360 DEGREES Tools Slots in storage 20 Additional Equipment Automatic tool changer cooling through spindle at 30 bar control OSP200 DIMENSIONS AND WEIGHT Measurements width 2500 Measurements depth 2800 Measurements height 2950 Machine weight 7900 kg

Condition: like new (used), Year of construction: 2018, operating hours: 7,600 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 255 mm, wire diameter (max.): 0.3 mm, empty load weight: 1,800 kg, table load: 500 kg, Equipment: cooling unit, documentation/manual, The machine includes Fanuc-CAMi software. Factory documentation is available. It operates flawlessly and with high precision. This machine is used for custom parts manufacturing. It was operated in a single shift. Lhodpfx Akezcv R Njyoh

Year of construction: 2004, condition: ready for operation (used), Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 8.3kVA, rated current: 12A, weight: 3t, equipment: rotary quill, controlled C-axis, CNC conversational control system with 4 axes, hand-held control unit, tool holder: Erowa ITS quick-clamping chuck, 20-position electrode changer, paper cartridge filter. An on-site inspection is possible. Lodpfxjzadk Eo Akyohh

Condition: repair required (used), Year of construction: 1987, EDM sinking machine, manufacturer AGIE, type: EMT 1.20, year of manufacture: 1987. Travel ranges: X 250 mm, Y 160 mm, Z 200 mm with R3 adjustable head. Lhsdpfjix Nqhsx Akyeh Further details can be found in the data sheet.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, wire diameter (max.): 0.3 mm, overall weight: 3,900 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details. • U/V axes travel: ±70 mm Lsdpfxey Ulp Ts Akyshh • Number of controlled axes: 5 (X, Y, Z, U, V) • Taper cut: up to ±30° • Generator: MC 3S (Lista 030.844) • Axis driver (DA): DA MC 3S (Lista 030.834) • Electrical cabinet: Cabinet Classic 3S (Lista 027.254) • Power supply voltage: 3×400 V / 50 Hz • Installed power: 9 kVA • Rated current: 14 A • Dielectric: Deionized water • Heads type: Submerged with wire guide nozzles • Wire drive motor: +GF+ / Maxon Motor (Swiss made) • Circuit diagram: 628.992 Additional equipment • MTA chiller (included in the sale) • Resin filters • Deionizers • Wire feed/recovery system

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep AquaCut-W 4001.20 was manufactured in 2018. It features a working range of 4,000 x 2,000 mm and is equipped with a high-pressure pump system capable of 400 MPa. The machine includes automatic height control for the cutting head and a waterjet cutting table with grid support. If you are looking to get high-quality waterjet cutting capabilities, consider the MicroStep AquaCut-W 4001.20 machine we have for sale. Contact us for further details. - CNC Control Unit: MicroStep iMSNC with MMI console, 24" touchscreen, and two LCD operator units on the gantry- Working Range / Processing Area: 4,000 x 2,000 mm- Laser Pointer: Laserpointer with automatic offset transmission- Control Modules: Expert system, Service & Maintenance wizard, CNC program loading wizard, Automatic mechanical scanning calibration, Cutting program management (MRP), EcoInfo, MachineInfo, User-Management- CAM Software: AsperWin Basic, AsperWin Select macro library, AsperWin NC-Sim simulator- Connectivity: USB 3.0 port, MicroStep Remote Diagnostics, TeamViewer access, GSM Modem for SMS error notifications- Cutting Table: Waterjet cutting table with grid support- Height Control: Automatic height control for the waterjet cutting head- High-Pressure Pump System: BFT ECOTRON 40.37- Pump Permissible Working Pressure: 400 MPa (4,000 bar)- Pump Max Flow Rate: 3.8 l/min- Pump Tank Capacity: 140 liters- Pump Power Consumption: 39 kW (at 3*400 V, 50 Hz) / 46 kW (at 3*480 V, 60 Hz)- Pump Gross Weight: 1,110 kg- Pump Serial Number: 16414- Pump Drawing Number: 120343- Cutting Head: Allfi Cutting Head Type IV (1 unit)- Abrasive Head: Allfi Abrasive Head CENTERLINE Typ II "Long Life" (1 unit)- Abrasive Systems: Allfi Abrasive Dosing system, Allfi Abrasive Conveying System Type II, Automatic abrasive dosing via CNC- Sludge Removal: Desludging system (scraper conveyor) for 4,000 mm length, including sedimentation tank- Water Conditioning: Water stabilization dosing unit using WIN2054Si water chemistry- Safety Equipment: Double-sided cable pull safety mechanism (collision protection) via Emergency Stop- Total System Layout Footprint Dimensions: Approx. 7,122 mm (Length) x 4,200 mm (Width) (Main machine footprint alone is 7,122 mm x 3,476 mm)- Required Flooring Base: Concrete min. B20, thickness min. 200 mm, surface evenness ±5 mm Lsdpfxsy Ui Hps Akyohh

Year of construction: 2004, condition: repair required (used), X-axis: 800 mm // 900 mm/min Y-axis: 600 mm // 900 mm/min Z-axis: 400 mm // 900 mm/min U/V: 60 mm Workpiece: X: 1300 mm Workpiece: Y: 910 mm Workpiece: Z: 400 mm Max. table load: 2,300 kg Main electronic connection: 400 V / 50 Hz / 3P Total power requirement: 10 KVA Air pressure: 6 bar Dielectric tank: 250 liters Technical attributes Z-motion: 400 mm X-motion: 800 mm Y-motion: 600 mm Weight approx.: 4,700 kg Approx. onsite dimensions (L x W x H): 1,950 x 2,550 x 2,000 mm. Manuals and documentation included. Not working; we suspect the power supply. Mechanical condition is very good. Lhedpfsx Hxikox Akyoh

Condition: like new (used), Year of construction: 2017, operating hours: 9,830 h, The machine has not been used for several years so we want to sell it. It is in very good condition. Lsdpfowimu Hsx Akyohh

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: Lhjdpfx Asy Sxvhekyoh - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Condition: used, Year of construction: 2018, operating hours: 4,500 h, MT Cut UDS1785 Travel distances: X 850 mm Y 520 mm Z 610 mm Tool interface: HSK 63 Rapid traverse rate X/Y/Z: 32 m/min Tool magazine: 60 positions Machine weight: 6,800 kg Control system: Heidenhain TNC 640 Lhodjy Ug Epopfx Akyeh Coolant through tool, 50 bar Spindle speed: max. 12000 rpm Articulated band conveyor, discharge to the left Air through the spindle BLUM A2, laser system for tool measurement Measuring probe: Heidenhain TS 460 Rotoclear, rotating viewing window Emulsion mist extraction, SARA UC2D Year of manufacture: 2018 Spindle operating hours: 4512

Condition: excellent (used), Coater SP 400 Working width 400mm Working height 250mm Electric lifting and lowering of the worktop 4 knife shaft with traditional knives Planer shaft speed 5000r.p.m Main motor 4kw Suction nozzle fi120 Dimensions of the machine 800 x 1000 x 1080mmH Weight 410kg Ledpfxeuqnbuo Akyjhh

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: AGIE, number of axes: 3, This 3-axis AGIE Hyperspark 2 Exact with Erowa was manufactured in 2005. It features an X-axis travel of 350 mm, Y-axis travel of 250 mm, and Z-axis travel of 250 mm. The machine is equipped with AGIE VISION 4 Software and includes an EROWA ROBOT MULTI with 60 ITS 148 places and 240 ITS 50 magazine places. If you are looking to get high-quality die-sinking EDM capabilities, consider the AGIE Hyperspark 2 Exact machine we have for sale. Contact us for further details. Ledpfoy S A Dcjx Akyehh • EROWA ROBOT MULTI with 60 ITS 148 Places and 240 ITS 50 Magazine Places

Condition: new, For sale: Original KSB RIO50-40D circulation pump, brand new, in its original packaging. The pump is intended for heating and cooling installations, as well as for applications in building technology and industry. ⸻ Technical Data • Manufacturer: KSB • Model / Type: RIO50-40D • ID Number: 29 132 136 • Power supply: 230V, 3~ 400 V / 50 Hz • Number of speeds: 3 • Power consumption (P1): 180 / 240 / 330 W Lhedpfx Aksyhhmgeyjh • Nominal diameter: DN50 • Connection: flanged • Operating pressure: PN6 / PN10 • Max. medium temperature: 130°C • Protection class: IP44 • Insulation class: H • Weight: approx. 14.1 kg • Manufactured in: EU ⸻ Condition • New, unused • Original KSB packaging • Manufacturer's manual included • Condition exactly as shown in the pictures ⸻ Applications • Central heating systems • Heating and cooling circuits • Industrial and commercial facilities

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) Lodpfx Asyc H N Njkyjhh • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: new, For sale: New Siemens electric motor Motor unused, warehouse condition No signs of use, fully operational, ready for work Technical data: Manufacturer: Siemens Model: 1LE16032AA434AB4 Z Power: 30 kW Rotational speed: approx. 2955 rpm Lhodpfx Ajyv Inuekyjh Voltage: 400/690 V Frequency: 50 Hz Protection class: IP55 Energy efficiency class: IE3 Mechanical size: 200L Mounting type: B3 Robust industrial construction Ideal for industrial machinery, pumps, fans, and drive systems

Condition: excellent (used), For sale: Industrial electric motor by renowned manufacturer KSB Aktiengesellschaft. The motor is in good technical condition and fully operational. It features a robust construction and is designed for demanding industrial applications. Lhedpfeyvi Hfsx Akysh Technical specifications: Manufacturer: KSB Type: 1LA7163-4AA66-ZX77 Power: 11 kW Supply: 3~ 400/690 V Frequency: 50 / 60 Hz Speed: 1460 rpm (50 Hz) Protection class: IP55 Insulation class: F Mounting: IM B35 (flange + feet) Cos φ: approx. 0.84 Weight: approx. 85 kg Condition: Used Fully functional Normal signs of use (visible in the photos) Good condition

Condition: used, Cut Max Guillotine Lhodpfxjy Ega Us Akyjh Type: GM-1 Efficiency: 1500 kg/h Operating temperature: up to -20°C Machine dimensions: 2100 x 900 x 1850 mm Made of stainless steel Power supply: 3x400V 50 Hz Weight: 550 kg Condition: used/overhauled/ready to work